Laser Deposition
Pulsed Laser Deposition of Thin Film Heterostructures
... Thin films of Strontium Ruthenate have been grown on Strontium Titanate and Lanthanum Aluminate (100) substrates by pulsed laser deposition. X-ray diffraction results show that the films grown on the ...
78
The Influence of Bi content on The Structural and Optical Properties of thin TiO2 (1-x): Bix Films Prepared by pulse laser deposition
... pulse laser deposition (PLD) technique at a constant deposition parameter such as : (pulse Nd:YAG laser with λ=1064 nm, constant energy 800 mJ , repetition rate 6 Hz and ...
6
Growth of Gallium Oxide Nanowires by Pulsed Laser Deposition
... We report on the synthesis of gallium oxide nanowires by pulsed laser deposition using a gold catalyst. In the va- por-liquid-solid process, gold thickness was the crucial parameter for deciding the ...
5
Superconducting MgB2 thin films by pulsed laser deposition
... pulsed laser deposition with ex situ an- nealing in Mg, we deposited boron films by pulsed laser deposition 共 Lambda-Physik excimer laser, KrF, ⫽ 248 nm 兲 and reacted these with Mg in ...
6
Pulsed laser deposition growth of bismuth oxide superconductors
... pulse laser deposition of BiPbSrCaCuO material using a Nd-YAG ...proposed deposition of Bi20g layers between several layers of BiSrCaCuO to avoid this ...
221
Pulsed laser deposition of KNbO3 thin films
... have been prepared by pulsed laser deposition on several crystalline substrates,namely LiNb03 on o-A1203 sapphire6 and 100Si7 while KNb03 has been either directly deposited onto 100Mg08 [r] ...
8
Pulsed laser deposition of thick multilayer garnet crystal films for waveguide laser devices
... pulsed laser deposition (PLD) to fabricate thick multilayered garnet crystal planar waveguides with rare-earth ion doped cores for use as planar waveguide laser ...diode laser arrays, and ...
213
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
... vapour deposition (CVD), molecular beam epitaxy (MBE), magnetron plasma sputtering, and pulsed laser deposition (PLD) have all successfully been applied to fab- ricate ZnO fi lms with properties ...
8
Investigation of nanosecond and femtosecond pulsed laser deposition and application of some metal nanoparticle films
... EXPERIMENTAL SETUP AND CHARACTERIZATION TECHNIQUES 63 3.1 Laser and vacuum system for nanosecond and femtosecond pulsed laser deposition 63 3.1.1 Nanosecond PLD setup 64 3.1.2 Femtosecon[r] ...
278
Growth of nanolaminate structure of tetragonal zirconia by pulsed laser deposition
... Pulsed laser deposition (PLD) is quite easy to produce multilayer films composed of two or more materials. One of the major advantages is that the stoichiometry of the target can be retained in the ...
7
Femtosecond pulsed laser deposition of silicon thin films
... Presented in Figure 2 are SEM cross sections of selected thin films deposited under different parameters: (a) deposited at room temperature in Ar, (b) deposited at room temperature in 4% H in Ar and (c) deposited at ...
6
Pulsed laser deposition of electronic ceramics and analysis of the ablation plume
... film deposition rather than simply in the context of laser ablation or ...The laser source used is mainly a Q-switched, frequency doubled Nd:YAG operating at a wavelength of 532nm although a ...
185
Laser Deposition of Tetrasulfonated Phthalocyanine Layers for Gas Sensors
... the laser radi- ation with deposited ...the deposition condi- tions, all the energy of laser pulse is absorbed by ...high-energy laser radiation and ii) serves as an energy transmitter from ...
5
Pulsed laser deposition of electronic materials
... f laser wavelength. A Q-switched Nd:YAG laser operating at 1064 nm and 532 nm together with a KrF excimer laser operating at 248 nm were ...decreasing laser energy density with the FWHM ...
192
Laser-Induced Copper Deposition with Weak Reducing Agents
... of laser deposition is the heating of the solution with a laser beam, can be true only for strong reducing agents, as copper (II) doesn’t become a stronger oxidizing agent when heating a solution ...
15
Preparation and Characterisation of Nickel Doped Zinc Oxide Thin Films in comparison to ZnO Thin Films by Sol Gel Method
... vapour deposition (MOCVD) [12], pulse laser deposition (PLD) [13], spray pyrolysis [14] and sol-gel method [15]-[19] have studied structural and optical properties of nano crystalline ZnNiO thin ...
9
Modeling of Laser Based Direct Metal Deposition Process
... the laser deposition head, is the key component of the powder delivery ...The deposition head provides laser light, powder, and protection ...
7
Structural and Magnetoresistive Properties of Nanometric Films Based on Iron and Chromium Oxides on the Si Substrate
... pulse laser deposition is one of the attractive methods for the nanometric film ...and deposition of the layers with precise thicknesses on the different substrates from the various chemical ...
6
Deposition Temperature Dependence of Vortex Pinning Property in YBa2Cu3O7+BaHfO3 Films
... Pulsed laser deposition (PLD) 2) and metal organic chemical vapor deposition (MOCVD) 3) are the most used method for fabricating REBCO tapes, and BaMO 3 (BMO; M = Zr, Sn, Hf ...
6
Crystalline characteristics of annealed AlN films by pulsed laser treatment for solidly mounted resonator applications
... vapor deposition (CVD) [13], reactive sputtering [14], molecular beam epitaxy (MBE) [15], and pulsed laser deposition (PLD) ...plasma, laser, or rapid thermal anneal- ing (RTA) treatment [12, ...
6