• No results found

Mixed oxides

DESIGN OF NANOSIZED CERIA-ZIRCONIA MIXED OXIDES FOR CATALYTIC APPLICATIONS

DESIGN OF NANOSIZED CERIA-ZIRCONIA MIXED OXIDES FOR CATALYTIC APPLICATIONS

... ceria-zirconia mixed oxides and the corresponding vanadium oxide loaded catalysts, aiming at the enhancement of performance and thermal (textural) stability of these multi-component catalyst ...

11

SYNTHESIS, CHARACTERIZATION OF NANOSIZED SUPPORTED CERIA-BASED MIXED OXIDES FOR CATALYTIC APPLICATION

SYNTHESIS, CHARACTERIZATION OF NANOSIZED SUPPORTED CERIA-BASED MIXED OXIDES FOR CATALYTIC APPLICATION

... methodology. In this study, soft chemical routes namely coprecipitation and deposition coprecipitation techniques were adopted for preparation of unsupported and supported mixed oxides respectively. Even ...

15

Synthesis and Characterization of Nano CuO NiO Mixed Oxides

Synthesis and Characterization of Nano CuO NiO Mixed Oxides

... NiO is a very prosperous material extensively used in catalysis and other applications [27-29]. It is well known that the powder characteristics (particle size, particle size distribution, and shape) are strongly ...

12

Synthesis and Structural, Morphological and Electrochemical Characterization of nanostructured mixed oxides of nickel and cobalt Ni0 5Co2 5O4 powder Prepared by Co precipitation of Hydroxides Technique

Synthesis and Structural, Morphological and Electrochemical Characterization of nanostructured mixed oxides of nickel and cobalt Ni0 5Co2 5O4 powder Prepared by Co precipitation of Hydroxides Technique

... spinel-type mixed oxides have extensively been carried out (Makhtar Guene et ...of mixed oxides (7). So mixed oxides of nickel and cobalt are used now in near all fields of ...

6

MIXED OXIDES AND METAL SUPPORTED APATITE CATALYSTS FOR ORGANIC TRANSFORMATIONS

MIXED OXIDES AND METAL SUPPORTED APATITE CATALYSTS FOR ORGANIC TRANSFORMATIONS

... This chapter describes the various catalyst / process options available for an industrial chemist to effect different organic transformations. It includes a brief introduction of homogeneous, heterogeneous catalysis and ...

6

Photocatalytic Degradation of Methyl orange over Cobalt – Titanium Mixed Oxides

Photocatalytic Degradation of Methyl orange over Cobalt – Titanium Mixed Oxides

... Ti oxides on the photodegradation of methyl orange dye were investigated and, the performance was compared with individual single metal ...of mixed oxide photocatalyst and their photoactivities was also ...

5

Effect of CO2 on the Conversion of Isobutane over Iron, Cerium and Molybdenum Mixed Oxides

Effect of CO2 on the Conversion of Isobutane over Iron, Cerium and Molybdenum Mixed Oxides

... drawbacks for practical applications. Here we report the conversion of IB in the presence of CO2 in gas phase over cerium-iron-molybdenum mixed oxides prepared by thermal decomposition of Ce 1.5 PMo 12 O 40 ...

7

Catalytic production of biodiesel from corn oil by metal-mixed oxides

Catalytic production of biodiesel from corn oil by metal-mixed oxides

... ABSTRACT: The present study investigates the t C and 1 atm. These two catalysts have been prepared via a conventional co-precipitation process. As for MgO, the corresponding mixed metal nitrate solution has been ...

10

Tailored Mixed Metal Oxides for Chemical Looping Processes.

Tailored Mixed Metal Oxides for Chemical Looping Processes.

... monometallic oxides, mixed oxides offer a significantly enlarged material design space with potentially tunable redox ...manganese-containing mixed metal oxides, including Mn-Fe, Mn-Si, ...

206

Spray Pyrolysis Deposition of Single and  Mixed Oxide Thin Films

Spray Pyrolysis Deposition of Single and Mixed Oxide Thin Films

... for mixed oxide ...single oxides below 450˚C. The re- sults for mixed oxides show that the best homogeneous films are obtained for 80 wt% ZnO + 20 wt% In 2 O 3 , and 80 wt% SnO 2 + 20 wt% In 2 ...

18

Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts

Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts

... ∆H 298˚ = -41.2 kJ.mol -1 (3) The process is totally endothermic, and in case of CO formation, because the WGS reaction is a moderately exothermic reaction, raising the temperature would improve undesirable reverse ...

14

Syntheses and Thermal Characterisation of Mixed (Sm-Y) Oxalates Prepared by Coprecipitation Method

Syntheses and Thermal Characterisation of Mixed (Sm-Y) Oxalates Prepared by Coprecipitation Method

... work, mixed (Sm 1-x Y x ) 2 [C 2 O 4 ] 3 ...the mixed oxalates is complex although completed a lower ...Sm-Y mixed oxides, because all the properties of the mixed oxides are ...

5

The Effect of Calcination Temperature on Synthesis of B4C-Nano Tib2 Composite by Co-Precipitation Method

The Effect of Calcination Temperature on Synthesis of B4C-Nano Tib2 Composite by Co-Precipitation Method

... of mixed oxides of titanium and boron, reduction of mixed oxides by metals like aluminum, magnesium and silicon, reduction of titanium oxide by boron carbide and carbon or synthesized from the ...

7

Synthesis and Characterization of Alumina Zirconia Powders Obtained by Sol Gel Method: Effect of Solvent and Water Addition Rate

Synthesis and Characterization of Alumina Zirconia Powders Obtained by Sol Gel Method: Effect of Solvent and Water Addition Rate

... of mixed oxides depend on several syn- thesis parameters: The type of precursor, solvent, water content, pH, precursor concentration, calcination tempera- ture, mechanical or magnetic agitation, speed of ...

8

PREPARATION, CHARACTERIZATION, AND EVALUATION OF CERIUM OXIDE COMPRISED NOVEL NANOSIZED COMPOSITE OXIDES FOR CATALYTIC APPLICATIONS

PREPARATION, CHARACTERIZATION, AND EVALUATION OF CERIUM OXIDE COMPRISED NOVEL NANOSIZED COMPOSITE OXIDES FOR CATALYTIC APPLICATIONS

... Chapter 2 deals with the experimental procedures and the techniques employed in this investigation. The details pertaining to the preparative methodologies employed to obtain the unsupported and supported ceria-terbia ...

7

Facile fabrication and characterizations of nanostructured Fe2O3-TiO2 composite from Ilmenite ore

Facile fabrication and characterizations of nanostructured Fe2O3-TiO2 composite from Ilmenite ore

... condition. The calcinated products were then cooled naturally to room temperature before underwent a ball- milled process with 150 and 200 g of 2 and 5 mm-diameter zirconia ball in the milling cell and filled with 80 ml ...

5

SYNTHESIS AND CHARECTERIZATION OF NANO CRYSTALLINE METAL OXIDES/ MIXED METAL OXIDES AND THEIR APPLICATION IN SUPERCAPACITORS

SYNTHESIS AND CHARECTERIZATION OF NANO CRYSTALLINE METAL OXIDES/ MIXED METAL OXIDES AND THEIR APPLICATION IN SUPERCAPACITORS

... stannous chloride precursor and of spherical particles in the range of 20–50 nm while Al species was formed as amorphous nano AlOOH. On calcination, AlOOH was transformed to alumina but in all the calcined mixed ...

14

Mixed Metal Catalysts for the Synthesis of Azelaic Acid88-92

Mixed Metal Catalysts for the Synthesis of Azelaic Acid88-92

... Bond and Webster (I), using mixed metal catalysts derived from mixed oxides using a modification of the Adams method, demon- strated that a mixed ruthenium-platinum cat[r] ...

5

Mixed Metal Oxides, Catalysis and Isokinetic Relationship

Mixed Metal Oxides, Catalysis and Isokinetic Relationship

... oxides are heated at 1000 o C for definite periods yielding three different samples of catalysts. Thus, these three samples present a group of catalysts of different catalytic activities forming a family of ...

6

Effect Of PH On The Physicochemical Properties Of MoVTeNbOx Catalysts For Oxidation Of Propane To Acrylic Acid

Effect Of PH On The Physicochemical Properties Of MoVTeNbOx Catalysts For Oxidation Of Propane To Acrylic Acid

... [4] Beato, P., Blume, A., Girgsdies, F., Jentoft, R.E., Schlögl, R., Timpe, O., Trunschke, A., Weinberg, G., Basher, Q., Hamid, F.A., Hamid, S.B.A., Omar, E., and Mohd Salim, L. (2006). Analysis of structural ...

6

Show all 10000 documents...

Related subjects