• No results found

superconducting materials

Revisiting Low-Frequency Susceptibility Data in Superconducting Materials

Revisiting Low-Frequency Susceptibility Data in Superconducting Materials

... in superconducting materials at low-frequency, are shown to be accounted for consistently within the framework of a recently published [1] analysis of the skin ...

8

A Review on Cuprate Based Superconducting Materials Including Characteristics and Applications

A Review on Cuprate Based Superconducting Materials Including Characteristics and Applications

... Abstract: A general review on cuprate based superconducting materials has been made. The special features of cuprate based high-temperature superconductors have been explained from the material side and the ...

18

SUPERCONDUCTING MATERIALS AND ITS APPLICATIONS

SUPERCONDUCTING MATERIALS AND ITS APPLICATIONS

... other superconducting materials are increasing and size are also the faults ...these materials are zero below 12 Kelvin , the CNTs will replace the defaults of other materials with its high ...

6

Platinum-Based and Platinum-Doped Layered Superconducting Materials: Synthesis, Properties and Simulation87-100

Platinum-Based and Platinum-Doped Layered Superconducting Materials: Synthesis, Properties and Simulation87-100

... layered superconducting materials has been investigated for a long time, and Pt has been found to play a triple role: (a) as a dopant, (b) as a component of non-superconducting blocks (spacer ...

14

Analysis of Possible Nonlocal Forces in Superconducting Materials

Analysis of Possible Nonlocal Forces in Superconducting Materials

... the superconducting materials move in pairs (known as pairs of Cooper) and without collisions with the atoms of the material (zero electrical resistance), being the origin of the ...temperature ...

11

ROLE OF HIGH TEMPERATURE SUPERCONDUCTING MATERIALS FOR INNOVATIONS AND TECHNOLOGY

ROLE OF HIGH TEMPERATURE SUPERCONDUCTING MATERIALS FOR INNOVATIONS AND TECHNOLOGY

... property exists in LaFePO at 4K as well as in material LaFeAsO or LaFeAsF with 43K temperature. The highest critical temperatures in the iron-based superconducting compounds exist in thin films of FeSe, where a ...

10

Synthesis and pulsed laser deposition of lead-based cuprate superconducting materials

Synthesis and pulsed laser deposition of lead-based cuprate superconducting materials

... be superconducting with Tc>80K because o f its structural sim ilarity w ith ...higher superconducting transition tem perature w ith a high degree of orientation dem onstrated through X RD patterns o f 15 ...

264

Computer modelling of oxide and molecular superconducting materials

Computer modelling of oxide and molecular superconducting materials

... Electrocrystallisation techniques are used to grow crystals o f ET salts where by the organic electron donor molecules are oxidised in situ in the presence of a suitable anion. The solution containing the anion also acts ...

205

Electrical Resistance of Superconductors

Electrical Resistance of Superconductors

... for superconducting effects, so it has been modified to provide a complete description of electrical ...of superconducting materials to demonstrate the accuracy of this theoretical ...

5

Overview and assessment of superconducting technologies for power grid applications

Overview and assessment of superconducting technologies for power grid applications

... feasible superconducting material architecture for SFCLs in HVDC supergrids - could cascade into other applications of superconductivity, with the development of advanced and more economical high temperature ...

6

Minimizing of Fault Current Using SFCL Technology

Minimizing of Fault Current Using SFCL Technology

... on superconducting technologies i.e. Superconducting Fault current Limiters ...Currents. Superconducting Fault current Limiters provides an effective way to suppress fault current [3], ...of ...

7

Role of Holes in Determining Resistivity and Hall Effect in Crystals of YB2Cu3O7 δ and Bi2Sr2CaCu2O8 δ

Role of Holes in Determining Resistivity and Hall Effect in Crystals of YB2Cu3O7 δ and Bi2Sr2CaCu2O8 δ

... Electrical transport properties of superconducting materials are a widely stu- died area in superconductivity. In this study, the role of holes in determination of resistivity, Hall coefficient and Hall ...

12

Time reversal symmetry breaking in the noncentrosymmetric superconductor Re6Hf : further evidence for unconventional behavior in the α  Mn family of materials

Time reversal symmetry breaking in the noncentrosymmetric superconductor Re6Hf : further evidence for unconventional behavior in the α Mn family of materials

... Superconductivity is a complex phenomenon and provides a rich experimental and theoretical playground in which to investigate physics. To this date, our microscopic understand- ing is primarily built upon the theory of ...

6

Muon studies of unconventional superconductors

Muon studies of unconventional superconductors

... of superconducting materials - the induced current in the coils due to the motion of the magnetized sample does not decay as it would in a normal ...

161

Quasi First Order Magnetic Transition in Mn1 9Fe0 1Sb0 9Sn0 1

Quasi First Order Magnetic Transition in Mn1 9Fe0 1Sb0 9Sn0 1

... X-ray powder diffraction measurements under high mag- netic field were carried out at the High Field Laboratory for Superconducting Materials, Institute for Materials Research (IMR), Tohoku ...

5

High-Quality CrO2 Nanowires for Dissipation-less Spintronics

High-Quality CrO2 Nanowires for Dissipation-less Spintronics

... for superconducting spintronics, progress in this field has been impeded because of a poorly controlled S-F interface transparency, ill-defined current paths, and an incomplete knowledge of the local magnetization ...

6

Superconductivity and Thermal Property of MgB2/Aluminum Matrix Composite Materials Fabricated by 3 Dimensional Penetration Casting Method

Superconductivity and Thermal Property of MgB2/Aluminum Matrix Composite Materials Fabricated by 3 Dimensional Penetration Casting Method

... composite materials can disperse particles in the matrix homogenously without any aggregation and control their volume fractions within the range of 4–40%, even when particle size is less than 1 ...composite ...

7

A study of novel superconducting states in hybrid ferromagnetic superconducting metamaterials and thin film devices

A study of novel superconducting states in hybrid ferromagnetic superconducting metamaterials and thin film devices

... Growth of all the material layers was carried out at ambient temperature, at a base pressure of 10 −8 mbar and under a standard Argon flow of 26 sccm. All samples measured as part of this study were grown in two separate ...

211

DC line to line short-circuit fault management in a turbo-electric aircraft propulsion system using superconducting devices

DC line to line short-circuit fault management in a turbo-electric aircraft propulsion system using superconducting devices

... Based on the weight, size and efficiency, various architec- tures have been evaluated for the aircraft propulsion system, namely: AC, DC and Hybrid [9]. Of them, the overall effi- ciency of the AC architecture was ...

6

Evidence for orbital order and its relation to superconductivity in FeSe0 4Te0 6

Evidence for orbital order and its relation to superconductivity in FeSe0 4Te0 6

... Among the iron-based superconductors, the iron chalcogenides are par- ticularly well suited for STM experiments: they have a well-defined cleavage plane and expose a nonpolar surface, and from low-energy electron ...

7

Show all 10000 documents...

Related subjects