vinylidene fluoride
Conductivity and Structural Studies of Poly(vinylidene fluoride co-hexafluoropropylene)/Polyethyl methacrylate Blend Doped with Ammonium Triflate
... poly(vinylidene fluoride co-hexafluoropropylene) (PVDF-HFP) have been used as host polymers for polymers for polymer electrolytes by a few group of researchers ...
14
Effects of an ionic liquid and processing conditions on the β polymorph crystal formation in poly(vinylidene fluoride)
... IJ vinylidene fluoride) (PVDF) are determined by the prevalence and ori- entation of its polar β -crystal phase, which can be tuned by processing conditions, additives, mechanical stretching or ...
11
Effects of Coupling Agents on the Structure and Electrical Properties of PZT-Poly(vinylidene fluoride) Composites
... (vinylidene fluoride)(PVDF) had been extensively applied in many areas such as electric industries, microelectronics, acoustic impedance with underwater, and so on ...
10
Ultra Sensitive Strain Sensor Based on Flexible Poly(vinylidene fluoride) Piezoelectric Film
... Poly(vinylidene fluoride) (PVDF) is a chemically stable piezoelectric polymer material that has many applica- tions in different fields for its pyroelectric, piezoelectric, and ferroelectric properties [1, ...
6
Effect Of Ionic Liquid On Semi–crystalline Poly(vinylidene fluoride–co–hexafluoropropylene) Solid Copolymer Electrolytes
... Poly(vinylidene fluoride–co–hexafluoropropylene) (PVdF– HFP) is a semi–crystalline polymer which composed of crystalline VdF unit and amorphous HFP units ...
16
Formation of Poly(vinylidene fluoride) Nanofibers Part II: the elaboration of incompatibility in the electrospinning of its solutions
... Poly(vinylidene fluoride) (PVDF) fibers with two molecular weights were prepared via electrospinning process. In this process, the concentration of spinning depended drastically on the gelation process. ...
6
Effect of the carbon nanotube surface characteristics on the conductivity and dielectric constant of carbon nanotube/poly(vinylidene fluoride) composites
... determination of pH at the point of zero charge. CNT/poly(vinylidene fluoride) composites were prepared using the above CNT samples, with different filler fractions up to 1 wt%. It was found that oxidation ...
5
Electromagnetic wave absorption properties of ternary poly(vinylidene fluoride)/magnetite nanocomposites with carbon nanotubes and graphene
... processing of polymers to design excellent EM wave absorbers [6]. These nanocomposites provide merits of light weight, flexibility and cost effectiveness. For polymer matrix, there are various options such as polyaniline ...
6
Copolymerization of Vinylidene Fluoride with Hexafluoropropylene in Supercritical Carbon Dioxide
... Poly(vinylidene fluoride) and the low HFP content copolymers are produced commercially by either emulsion or suspension polymerizations in water 17, 18 , while the elastomeric VF2/HFP copolymers are ...
235
Isothermal Melt Crystallization Kinetic Behavior of Poly (vinylidene fluoride)
... 22- Asai, K., Okamoto, M. and Tashiro, K. (2008). "Crystallization behavior of nano-composite based on poly(vinylidene fluoride)and organically modified layered titanate." Polymer., Vol. 49, pp. ...
9
Structural Characterization of Poly(vinylidene fluoride- Chlorotrifluoroethylene) Thin Films
... (vinylidene fluoride-Chlorotrifluoroethylene) – (PVDF-CTFE) thin films with two different Chlorotrifluoroethylene (CTFE) compositions, 10 and 30 mol% with respect to Polyvinylidene fluoride (PVDF) ...
8
Effect of Casting Conditions on the Crystallization and Resulting Morphology in Compatibilized and Uncompatibilized Poly (ethylene oxide )-Poly (vinylidene fluoride) blends
... 53 Figure 20B: Melting curves for PVAc compatibilized PEO/Kynar 301 blend systems 54 Figure 21: Optical Micrographs for Kynar 301- PMMA Figure 22: Optical Micrographs for Kynar 301-PVAc [r] ...
99
Performance of Chemically Modified TiO2-poly (vinylidene fluoride) DCMD for Nutrient Isolation and Its Antifouling Properties
... Amongst the membranes, the Ac-TiO 2 membrane has relatively bigger pore size and reasonably high. porosity which exerts minimum flow resistance to the vapor, and as a re[r] ...
6
A Positive-Temperature-Coefficient Layer Based on Ni-Mixed Poly(Vinylidene Fluoride) Composites for LiFePO4 Electrode
... Sci., 8 2013 5223 - 5231 International Journal of ELECTROCHEMICAL SCIENCE www.electrochemsci.org A Positive-Temperature-Coefficient Layer Based on Ni-Mixed PolyVinylidene Fluoride Compos[r] ...
9
Influence Of Suspension Preparation Condition And Medium Microstructure And Phase Of Electrophoretic Deposited Poly (Vinylidene Fluoride) Films
... Figure 4.8 SEM results of PVDF film surface and cross section 46 of deposited sample at 80⁰C, 8 hour stirring condition in DMF based suspension Figure 4.9 SEM results of PVDF film surfac[r] ...
24
Ionic Conduction of Blend Poly (Vinylidene Fluoride-Hexafluoro Propylene) and Poly (Methyl Methacrylate)-Grafted Natural Rubber Based Solid Polymer Electrolyte
... Mohamed4 1 School of Chemical Sciences and Food Technology, Faculty of Science and Technology Polymer Research Center, Faculty of Science and Technology Universiti Kebangsaan Malaysia, 4[r] ...
10
High performance triboelectric nanogenerators based on phase-inversion piezoelectric membranes of poly(vinylidene fluoride)-zinc stannate (PVDF-ZnSnO3) and polyamide-6 (PA6)
... were enhanced by approximately 70% and 200% from 300 V to 520 V and from 0.91 mAm -2 to 2.7 mAm -2 , respectively when subjected to a 489N/3Hz impact frequency. The increase in the elec[r] ...
25
Recent Advances in Poly(vinylidene fluoride) and Its
... separator presents good cycling performance in lithium ion batteries and a high ionic conductivity 417. [141][r] ...
41
Preparation and characterization of poly(vinylidene fluoride)/nanoclay nanocomposite flat sheet membranes for abrasion resistance
... fibre membranes for improved abrasion resistance, and found PVDF nanocomposite 81.. membranes lasted up to three times longer than the reference PVDF.[r] ...
23
Polymerization of Vinylidene Fluoride in Supercritical Carbon Dioxide: Molecualr Weight Distribution
... weight distribution (MWD) of PVDF at different reaction conditions. Chapter IV presents a mathematical model to predict the rate of polymerization and MWD of the PVDF. In Chapter V, p[r] ...
135