4.2 Station Parameters
4.2.5 Station view: Forwarding
4.2.5.2 Area: Ringing group
Under Stations included you can view all the stations that have currently been added by the selected station to the answer group.
Connection of shows all the stations that have currently added the selected station to an an- swer group.
4.2.5.3 Area: Call forwarding
The call forwarding details for the selected stations are shown in this field. Use the drop-down list to select one call dest. list each for Day, Night and Internal, respectively. In the fields below the drop-down lists, the currently defined call dest. lists are displayed. To edit call detsination lists, click on the arrow symbol after Call forwarding.
See also
– Section 4.1, “Station Selection”, on page 4-2 – Section 4.2, “Station Parameters”, on page 4-3 – Section 4.2.1, “Station view: Flags”, on page 4-5
– Section 4.2.2, “Station view: Activated features”, on page 4-12 – Section 4.2.3, “Station view: Workpoint Client”, on page 4-15 – Section 4.2.4, “Station view: Groups”, on page 4-16
file.fm
Nur für den internen Gebrauch File Menu
5
File Menu
HiPath 5000 RSM/AllServe
– Transfer | HiPath 5000 RSM/AllServe Server Open Customer Database
Save Customer Database Save Customer Database As Close Customer Database Print / Print Preview
Printer Setup Transfer
● Transfer | Communication
● Transfer | Communication | Maintenance
– Maintenance | IVM (only if an IVM card is plugged in)
– Maintenance | IVM: Mailbox configuration (as of IVM Version 2) – Maintenance | IVM: Execute file operations
– Maintenance | IVM: Execute file operations: Display Statistical Data – Maintenance | EVM
– Maintenance | EVM: Initialize mailboxes – Maintenance | EVM: Execute file operations ● Transfer | Communication | Security
– Security | User administration – Security | Protocol
Exit
5.1
Transfer | HiPath 5000 RSM/AllServe Server
Transfer | HiPath 5000 RSM/AllServe Server is used to load the server configuration to Hi- Path 3000 Manager and to transfer the modified configuration back to the server.
Area: Security Change password
Opens the Change password in system dialog, via which the current password being used in all nodes and in the server can be modified. Changes are implemented immediately in all nodes and in the server.
User administration
Opens the Security | User administration dialog, where the user administrator can define new users, assign them to a user group, and also delete existing users. Changes are implemented in all nodes and in the server.
Area: HiPath 5000 RSM/AllServe Server Area: Server
A server computer can be specified in this field. If this computer is not available, the error mes- sage PC not found! is displayed. If the server software has not been loaded on this computer, the error message HiPath 5000 RSM/AllServe server not installed on this PC! is displayed.
Browse
The system to be used as the server can be selected via Browse.
Area: Update server from systems System->Server
Pressing the System->Server button loads the customer data memory from the individual nodes to the server. The data is then loaded from the server to the main memory of the PC (this
file.fm
Nur für den internen Gebrauch File Menu
Transfer | HiPath 5000 RSM/AllServe Server
Area: Read/write database
Server->Manager, Manager->Server
Server->Manager is used to transfer the customer database from the server to the main mem- ory of the PC.
Manager->Server is used to load the active customer databases from the PC to the server and then automatically to the appropriate nodes.
The PC and the server can be the same machine. Depending on the communication system, the transfer can take between two and six minutes.
Note that a read is always implemented first in order to have an error-free customer database even if a transmission error should occur.
Delta mode
Delta mode can only be activated if a CDB is already loaded in your PC’s main memory. When Delta mode is activated, only changes made since the customer database was last downloaded are written to the communication system. If, for example, only a station name is changed, then the transmission time is drastically reduced.
Call charges
Pressing the Call charges button causes the contents of a particular memory area (RDI = ReaD or Init) of the communication system to be overwritten by the customer database. This data contains values that can be only read or initialized by HiPath 3000 Manager.
It makes sense to select this field when exchanging the motherboard so that all data can be completely taken over or when resetting the following data in HiPath 3000 Manager:
– Call charges
– Counter for the features activated in the communication system – Station codelock
The following data is also overwritten:
7
When a customer database is downloaded from the communication system, it is al-ways assigned the file name HiPathServerDB.net, and the node customer database is named HiPathServerDBx.kds (where x corresponds to the number of the node in question).Area: Add/Delete Nodes Add Node, Delete Node
These buttons are only enabled when nodes have been added or deleted. It is only via these buttons that the changes made are also permanently implemented in the HiPath 5000 server.
See also:
– Chapter 5, “File Menu”
– Section 5.8, “Transfer”, on page 5-11
file.fm
Nur für den internen Gebrauch File Menu
Open Customer Database