B IBLIOGRAPHY

AASHTO (2004). LRFD Bridge Construction Specifications, American Association of State Highway and Transportation Officials, Washington D.C.

AASHTO (2004), LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington D.C.

AASHTO (2002), Standard Specification for Highway Bridges, Division I: Design, American Association of State Highway and Transportation Officials, Washington D.C.

AASHTO (2002), Standard Specification for Highway Bridges, Division II: Construction, American Association of State Highway and Transportation Officials, Washington D.C.

AASHTO (2000). “Standard Specifications for Transportation Materials and Methods of Sampling and Testing”, American Association of State Highway and Transportation Officials, 20th Edition.

AASHTO, Section 30 (2001). “Thermoplastic Pipe”, Interim Report, Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials

AASHTO, Section 18 (2001). “Soil-Thermoplastic Pipe Interaction Systems”, Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials, 16th Edition, pp 377-382.

AASHTO, M145 (1993). “Standard Method of Test for the Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes,” American Association of State Highway and Transportation Officials.

AASHTO, M196-92 (2000). “Corrugated Aluminum Pipe for Sewers and Drains,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials, Washington D.C.

AASHTO, M197-00 (2000). “Aluminum Alloy Sheet for Corrugated Aluminum Pipe,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials,

Washington D.C.

AASHTO, M252M (1996). “Standard Specification for Corrugated Polyethylene Drainage Pipe,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials.

AASHTO, M294 (2001). “Standard Specification for Corrugated Polyethylene Pipe, 300- to 1200-mm Diameter,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials.

AASHTO, MP6-95 (1995). “Standard Specification for Corrugated Polyethylene Pipe, 1050- to 1200-mm Diameter,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials.

AASHTO, MP7 (1997). “Standard Specification for Corrugated Polyethylene Pipe, 1350- to 1500-mm Diameter,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials.

AASHTO, Section 12 (2001). “Plastic Pipe Design,” Standard Specification for Highway Bridges, American Association of State Highway and Transportation Officials.

AASHTO, T99 (1995). “Standard Specification for the Moisture-Density Relations of Soils Using a 2.5-kg (5.5- lb) Rammer and a 305-mm (12-in) Drop,” American Association of State Highway and Transportation Officials.

ACPA (1995). Concrete Pipe Installation, American Concrete Pipe Association, Irving, TX.

ACPA (1996). “Standard Installations and Bedding Factors for the Indirect Design Method,” Design Data 40, American Concrete Pipe Association, Irving, TX.

ACPA (1998). Concrete Pipe Handbook, American Concrete Pipe Association, Irving, TX.

ACPA (2000). Concrete Pipe Design Manual, American Concrete Pipe Association, Irving, TX.

ACPA (2001). Selected ASTM Standards on Concrete Pipe, American Concrete Pipe Association Irving, TX.

Advanced Drainage Systems, (1994). Technical Notes, Technical Note 2.116, Columbus, Ohio.

Advanced Drainage Systems, (1995). Technical Notes, Technical Note 2.101, Columbus, Ohio.

Advanced Drainage Systems, (1995). Technical Notes, Technical Note 2.108, Columbus, Ohio.

Advanced Drainage Systems, (1999). Specification Manual, No. 17437l, Columbus, Ohio.

Arnoult, J.D. (1986). “Culvert Inspection Manual: Supplement to the Bridge Inspector’s Training Manual,” Report FHWA-IP-86-002, Federal Highway Administration, McLean, VA, 215 pp.

ASTM A930-99 (1999). “Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM B744 (1999). “Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM B745 (1997). “Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM B788 (2000). “Standard Specification for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM B789 (1999). “Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM B790 (2000). “Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM C361 (1999). “Standard Specification for Reinforced Concrete Low-Head Pressure Pipe,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM C497, (1998). “Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM C1131 (2000). “Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM C1479 (2001). “Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM C1131 (1995), “Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culverts, Storm Sewer, and Sanitary Sewer Systems”, American Society for Testing and Materials, West Conshohocken, PA.

ASTM D2321 (2000). “Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and other Gravity-Flow Applications”, American Society of Testing and Materials, West Conshohocken, PA.

ASTM D2487-00 (2005). “Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System),” American Society of Testing and Materials, West Conshohocken, PA.

ASTM D3350-04 (2005). “Standard Specification for Polyethylene Plastics Pipe and Fittings Materials,” American Society of Testing and Materials, West Conshohocken, PA.

ASTM D3839 (1994). “Standard Practice for Underground Installation of ‘Fiberglass’ (Glass-Fiber-Reinforced- Thermosetting Resin) Pipe,” American Society of Testing and Materials, West Conshohocken, PA.

ASTM D5397 (1999). “Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test,” American Society of Testing and Materials, West Conshohocken, PA.

ASTM F1675 (1996). “Standard practice for Life-Cycle Cost Analysis of Plastic Pipe used for Culverts, Strom Sewers, and Other Buried Conduits,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM F667 (1997). “Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM F892 (1995). “Standard Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings,” American Society for Testing and Materials, West Conshohocken, PA.

ASTM F894 (1998). “Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe,” American Society for Testing and Materials, West Conshohocken, PA.

Ballinger, C.A. and Drake, P.G., Culvert Repair Practices Manual (1995). Vols. 1 and 2, Reports FHWA-RD- 94-096 and FHWA-RD-95-089, Federal Highway Administration, McLean, VA, (Vol.1) 265 pp. and (Vol. 2) 354 pp.

Bellair, P. J. & Ewing, J. P. (1984). “Metal-Loss Rates of Uncoated Steel and Aluminum Culverts in New York.” Transportation Research Record, No. 1001, Transportation Research Board, Washington D.C., pp 60-66.

Chambers, R.E., McGrath, T.J., and Heger, F.J. (1980). “Plastic Pipe for Subsurface Drainage of Transportation Facilities,” National Cooperative Highway Research Program Report 225, Transportation Research Board, National Research Council, Washington, D.C., Oct.

Cahoon, J.E., Baker, D., Carson, J. (2002). “Factors for Rating Condition of Culverts for Repair or Replacement Needs,” Transportation Research Record, Transportation Research Board, No. 1814, Washington D.C., pp 197-202.

Chaker, Victor (1996). “Measuring Soil Resistivity: Choosing the Right Method.” ASTM Standardization News.

Corrugated Polyethylene Pipe Association (CPPA) (2003a). “Certified Pipe”, http://www.cppa – info.org/certification/pipe.html, (2/18/03).

Corrugated Polyethylene Pipe Association (CPPA) (2003b). “Certified Resin”, http://www.cppa – info.org/certification/resin.html, (2/18/03).

Corrugated Polyethylene Pipe Association (CPPA). “Recommended Installation Practices for Corrugated Polyethylene Pipe and Fittings”, http://www.cppa – info.org/install/, (6/13/99).

Corrugated Polyethylene Pipe Association (CPPA). “Structural Design Method for Corrugated Polyethylene Pipe”, http://www.cppa – info.org/design/index.cgi, (6/13/99).

Corrugated Polyethylene Pipe Association (CPPA). “Structural Integrity of Non – Pressure Corrugated Polyethylene Pipe”, http://www.cppa – info.org/integrit/index.cgi, (6/13/99).

CPPA, (1999). “Recommended Installation Practices for Corrugated Polyethylene Pipe and Fittings,”

http://www.cppa-info.org/install/, June, 13 1999.

CPPA (2000). “Chemical & Abrasion Resistance of Corrugated Polyethylene Pipe.” Corrugated Polyethylene Pipe Association

CPPA (2002). “Lasting Strength.” Corrugated Polyethylene Pipe Association http://www.cppa- info.org/brochure/bstrength.html (Accessed: 26 April 2002).

Crumpler, H. L., Jr. (1991). “HDPE Corrugated Plastic Pipes: The New Option in Corrosive Soils.” Corrugated Plastic Pipeline, Corrugated Plastic Pipe Association (CPPA), Volume 3.

Federal Highway Administration, (1986). “Culvert Inspection Manual, Supplement to the Bridge Inspector’s Training Manual”, U.S. Department of Transportation, Report No. FHWA-IP-86-2.

Florida Department of Transportation (2003). Drainage Manual, State of Florida Department of Transportation, Tallahassee, Florida.

Florida Department of Transportation (2000). “Florida Method of Test for Resistivity of Soil and Water.” FM 5- 551.

Gabriel, L.H. (1990). “Abrasion Resistance of Polyethylene and Other Pipes,” Corrugated Plastic Tubing Association.

Gassman, S. L., Schroeder, J. A., and Ray, R. P., (2000). “Performance Evaluation of Existing High-Density Polyethylene Pipe”, University of South Carolina-Department of Environmental and Civil Engineering, Report No.GT00-02 (FHWA/SCDOT Report No. FHWA-SC-00-08).

Georgia Department of Transportation, (1998). “Standard Operating Procedure 28-Inspection of Corrugated Polyethylene (P.E.) Underdrain and Culvert Pipe,” Laboratory SOP-28.

Hancor, Inc. (2001). “Professional’s Guide to Installing Corrugated Polyethylene Pipe,” http://www.hancor.com, (7/31/01).

Hazen, G.A., Sargand, S.M., Haque, M., Hurd, J.O. (1997). “Field Performance of Instrumented Concrete Pipe under Deep Burial,” Transportation Research Record, No. 1594, Transportation Research Board, Washington D.C., pp 224-234.

Haavik, D.J. and Mielenz, R.C. (1991). “Alkali-Silica Reaction Causes Concrete Pipe to Collapse,” Concrete International, American Concrete Institute, Vol. 13, No. 5, pp 54-57.

Hill, J.J., Kurdziel, J.M., Nelson, C.R., Nystrom, J.A., Sondag, M.S. (1999), “Minnesota Department of Transportation Overload Field Tests of Standard and Standard Installation Direct Design Reinforced Concrete Pipe Installations,” Transportation Research Record, No. 1656, Transportation Research Board, Washington D.C., pp 64-72.

Hurd, J.O. (1984). “Field Performance of Protective Linings for Concrete and Corrugated Steel Pipe Culverts,”

Transportation Research Record, No. 1001, Transportation Research Board, Washington D.C., pp 35- 39.

Hurd, J.O. and Hirsch, C. M. (1984). “Field Performance of Concrete and Corrugated Steel Pipe Culverts and Bituminous Protection of Corrugated Steel Pipe Culverts (Discussion and Closure),” Transportation Research Record, No. 1001, Transportation Research Board, Washington D.C., pp 40-48.

Hurd, J.O. (1985). “Field Performance of Concrete Pipe Culverts at Acidic Flow Sites in Ohio,” Transportation Research Record, Transportation Research Board, No. 1008, Washington D.C., pp 105-108.

Hurd, J.O. (1987). “Service Life Model Verification for Concrete Pipe Culverts in Ohio,” Ohio Department of Transportation.

Hurd, J.O., Kurdziel, J.M., Bealey, M. (1991). “Analysis of Reinforced Concrete-Pipe Performance Data. Discussion,” Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 117, No. 1, Reston, VA, pp 134-138.

Jacobs, Kenneth M. (1984). “Durability of Drainage Structures,” Transportation Research Record, No. 1001, Transportation Research Board, Washington D.C., pp 14-20.

Kentucky Department of Highways, (2000). “Approval Process for Manufacturers of Culvert Pipe,” Kentucky Method 64-115-2000.

Koerner, R.M. (2004), “Subsurface Drainage,” Transportation in the New Millennium, Transportation Research Board, Washington D.C., 6 p.

Kurdziel, J.M. & McGrath, T.J. (July 1991)., “SPIDA Method for Reinforced Concrete Pipe Design,” Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 117, No. 4, Reston, VA, pp 371-381.

Lane Enterprise. “Durability Design Data: Corrosion/Abrasion.” http://www.lane- enterprises.com/hdpeDurability.htm (Accessed: 18 February 2003).

McGrath, T.J and Howard, A. (1998). “Design and Installation of Buried Pipes,” Resource Book for Video #6 ASCE Video Series “Engineering in Action”, American Society of Civil Engineers, pp. 82.

Moser, A.P. (2001). Buried Pipe Design, McGraw Hill, New York.

National Transportation Product Evaluation Program (NTPEP), (2002). “Project Work Plan for Evaluation of HDPE Thermoplastic Pipe,” American Association of State Highway and Transportation Officials (AASHTO).

NCHRP (1978). “Durability of Drainage Pipe,” Synthesis of Highway Practice 50, National Cooperative Highway Research Program, Washington, D.C.

NCHRP (1998). Project 4-26, FY 1998: “Thermoplastic Drainage Pipe, Design and Testing,” National Cooperative Highway Research Program, Washington, D.C.

NCHRP (1999). Project 429, FY 1999: “HDPE Pipe: Recommended Material Specifications and Design Requirements,” National Cooperative Highway Research Program, Washington, D.C.

NCHRP (2002). Synthesis of Highway Practice 303, “Assessment and Rehabilitation of Existing Culverts,” National Cooperative Highway Research Program, Washington, D.C.

North Carolina Department of Transportation (2002). “HDPE Pipe Quality Control/Quality Assurance Program,” Feb. 3, 2002.

Ohio Department of Transportation (2003). Culvert Management Manual, Ohio Department of Transportation.

Palermo, G. (2002). “Plastics Pipe Institute’s QA/QC Programs for HDPE Corrugated Pipe,” presentation made at the 2002 Transportation Research Board Meeting, January.

PPI (2003). Design Manual for High Density Corrugated Polyethylene Pipe, Plastic Pipe Institute, Washington, DC.

PPI (1996). “Underground Installation of Polyethylene Pipe,” Plastic Pipe Institute, Society of the Plastics Industry Inc. (http://www.plasticpipe.org)

PPI (1999). “Inspections, Test and Safety Considerations,” Plastic Pipe Institute, Society of the Plastics Industry Inc. (http://www.plasticpipe.org)

PPI (2001). “PPI Third Party Certification Protocol – Corrugated HDPE Pipe (300 mm and larger) For AASHTO M294/MP 7 Applications,” Plastic Pipe Institute, Inc. Draft Report, (03/01/01)

Potter, J.C. (1988). “Analysis of Reinforced Concrete-Pipe Performance Data,” Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 114, No. 5, Reston, VA, pp 530-538.

Ring, George W. (1984). “Culvert Durability: Where Are We?,” Transportation Research Record, No. 1001, Transportation Research Board, Washington D.C., pp 1-8.

South Carolina Department of Transportation (2000). Standard Specifications for Highway Construction.

Summerson, T.J. (1984). “Corrosion Resistance of Aluminum Drainage Products: The First 25 Years,”

Transportation Research Record, Transportation Research Board, No. 1001, Washington D.C., pp 77- 87.

United States Army Corps of Engineers, Engineer Manual (1994). “Engineering Design: Conduits, Culverts and Pipes,” EM 1110-2-2902, Washington D.C.

United States Army Corps of Engineers, Engineer Manual (1998). “Engineering Design: Conduits, Culverts and Pipes,” EM 1110-2-2909, Washington D.C.