• No results found

Biometric Reader

In document Electronic Identification (Page 54-59)

ER5SB

This is a Magnetic reader, without keypad, housed in a plastic casing. Communication to controller is by 7 wires.

System Requirement

Reader Type Swipe-type Magnetic reader, track 2 (Other tracks also available)

Output Format

Colour Status indication By LED and beeper

Power Protection

Current

Consumption Operating

Temperature

Resolution Dimension 120(H)x120(L)x50(W)

mm Reading

Range Wide reading speed range

of 100-1500 mm/s Weight

HR-CR Handkey

The HR-CR Handkey is specifically designed to work in conjunction with card-based access control systems.

The unit’s card reader port allows the use of either a card for ID number input or use via an integrated keypad.

System Requirement

Ordering Information

ER-1000-001 Handkey CR - Palm Scan Reader for 512 users c/w Handnet Light Soft-ware (Lead-time : 6 to 8 weeks)

Magnetic Reader

Verification Time Less than 1 second Template Size 9 bytes

Power 12-24 VDC or VAC

ID Number 1 to 10 digits from keypad or card reader User Capacity 512 users standard

Internally expandable to 32,512 Card Reader Input/

Emulation

Standard format of either Wiegand/Proximity: 26-bit (8-bit facility code), Magnetic Stripe and Bar Code

Communications RS-485 (4-wire and 2-wire), RS-232 Baud Rate 1,200 to 28.8K bps

Dimension 29.6(H)x21.7(L)x22.3(W) cm

Weight 2.7kg

EA-1000-801 EM-801 Memory Expansion for 9,728 users (Handkey CR)

EK9S Serial Keypad (Rubber) with 4x7 Segment Display, Beige Ordering Information

ER-0009-001

EK9S

The EK9S is compatible with all ELID Access Controllers, and is often used in conjunc-tion with various types of readers. Only 8 wires are used for both scanning keypad and displaying status.

System Requirement

Keypad

Keypad 12-key membrane keypad

Display 4x7segment LED display

Colour Beige

Power 5V

Current Consumption 50 mA

Status indication beeper

Protection Surge protection

Operating Temperature 0°C to 40°C

Dimension 110(H)x90(W)x35(D) mm

Weight

Communicator, Serial c/w 0.5A Transformer, 5.5ft AC Cable &

Serial Cable Ordering Information

EL-0070-004

EL70BS

The EL70BS is a single bus Multi-drop to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The unit is similar to the EL70T, but has a slot for inserting software key (dongle), and so can be used where the software requires validation.

Communicator

Conversion circuitry: 1x Multi-drop to 1 x RS232 interface conversion circuitry Software key slot: None

EL70T

The EL70T is a single bus Multi-drop to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The unit has no slot for inserting software key (dongle), and so cannot be used where the software requires validation.

Conversion circuitry: 1x Multi-drop to 1 x RS232 interface conversion circuitry Software key slot: Available for inserting ELID software key

Communicator, PC with Lightning Protection c/w 0.5A Trans-former, 5.5ft AC Cable Serial Cable

Ordering Information EL-0070-021

EL70D

The EL70D is similar to the EL70BS, but provides the option of either Multi-drop or RS485. It will convert either half duplex RS485 or Multi-drop to RS232 allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It also has a slot for software key 2 (dongle).

Conversion circuitry: 1x Multi-drop or RS485 to 1 x RS232 interface conversion circuitry

Software key slot: Available for inserting ELID software key 2

Communicator, Serial to Multi-drop/RS485 with Lightning Protection, Power Supply Adapter 13.5/1.5A & Serial Cable Ordering Information

EL-0070-G23

EL70U Communicator, USB to RS485, USB Cable in Metal Housing (Optional: USB to Multidrop with PS Adapter)

Ordering Information EL-US70-G01

EL70L (LAN Terminal Server)

It is a mediating communication device between PC and ELID controllers for a small scale networked configuration on an Ethernet local area network. The communicator converts TCP/IP to RS485/Multi-drop/RS232 signals or vice versa. It also has a slot for software key 2 (dongle).

Communicator

Conversion circuitry: 1x Multi-drop or RS485 to 1 x USB interface conversion circuitry

Software key slot: Available for inserting ELID software key 2

EL70U

The EL70U is similar to the EL70D. It will convert either half duplex RS485 or Multi-drop to USB allowing PC to be linked to 16 controllers with maximum distance of 1 KM.

It also has a slot for software key 2 (dongle).

EL70L LAN Terminal Server c/w RS232 Cable & Adapter in Metal Housing (For Software Key 2)

Ordering Information EL-TS70-001

EL38

The EL38 is a single bus RS485 (4-wire) to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The EL38 has a slot for inserting software key (dongle), and so can be used where the software requires validation.

Conversion circuitry: 1x RS485 (4-wire) to 1 x RS232 interface conversion circuitry

Software key slot: Available for inserting ELID software key

EL38 Communicator c/w 9 to 9 Serial Cable & Adapter in Metal Housing

Ordering Information EL-0038-001

EL78A (LAN Terminal Server)

It is a mediating communication device between PC and ELID controllers for a small scale networked configuration on an Ethernet local area network. The communicator converts TCP/IP to RS485 (4-wire)/Multi-drop/RS232 signals or vice versa. It also has a slot for software key 2 (dongle).

EL78A LAN Terminal Server c/w RS232 Cable & Adapter in Metal Housing

Ordering Information EL-0078-002

RS485 – RS232 Converter c/w RS232 Cable Ordering Information

EG-4823-CV2

EA48

The EA48 is designed to convert Wiegand communication signals to RS232 communi-cation signals or vice versa.

Converter CV4823

The CV4823 is designed to convert RS232 communication signals to RS485 communication signals or vice versa.

EA48 Multiple Format Converter c/w 9 to 9 Cable, Adaptor &

Power Cord Ordering Information

EA-0048-001

EA52

The EA52 is designed to convert Mulit-drop/RS485 signals to RS232 communication signals.

Multi-drop RS485/RS232 Ordering Information

EA-0052-001

In document Electronic Identification (Page 54-59)

Related documents