BS EN 10223-2 (Revision)
Hexagonal steel wire netting for agricultural, insulation, and fencing purposes
will supersede BS EN 10223-2:1998
ISE/26
BS EN 10223-3 (Revision)
Hexagonal steel wire netting for engineering purposes
will supersede BS EN 10223-3:1998
ISE/26
BS EN 10223-4 (Revision)
Steel wire welded mesh fencing will supersede BS EN 10223-4:1998
ISE/26
BS EN 10223-5 (Revision)
Steel wire woven hinged joint and knotted mesh fencing
will supersede BS EN 10223-5:1998
ISE/26
BS EN 10223-6 (Revision)
Steel wire chain link fencing will supersede BS EN 10223-6:1998
ISE/26
BS EN 10223-7 (Revision)
Steel wire welded panels. For fencing will supersede BS EN 10223-7:2002
ISE/26
BS EN 10223-8
Welded mesh gabion products
ISE/26
BS EN 10225 (Revision)
Weldable structural steels for fixed offshore structures. Technical delivery conditions will supersede BS EN 10225:2001
ISE/12
BS EN 10238 (Revision)
Automatically blast cleaned and automatically primed structural steel products
will supersede BS EN 10238:1997
ISE/12
BS EN 10257:—
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or
telecommunication cables BS EN 10257-1 (Revision) Land cables will supersede BS EN 10257-1:1998 ISE/26 BS EN 10257-2 (Revision) Submarine cables will supersede BS EN 10257-2:1998 ISE/26 PD CEN/TR 12401
Dentistry. Guidance on the classification of dental devices and accessories
CH/106 BS EN 1555-2 (Revision) Pipes will supersede BS EN 1555-2:2002 PRI/88/2 BS EN 1555-3 (Revision) Fittings will supersede BS EN 1555-3:2002 PRI/88/2 BS EN 1555-4 (Revision) Valves will supersede BS EN 1555-4:2002 PRI/88/2 BS EN 1555-5 (Revision)
Fitness for the purpose of the system will supersede BS EN 1555-5:2002
PRI/88/2
BS EN ISO 1628:—
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers
BS EN ISO 1628-1 (Revision)
General principles
will supersede BS EN ISO 1628-1:1998
GEL/86/2
BS EN 1839 (Revision)
Determination of explosion limits of gases and vapours
will supersede BS EN 1839:2003
FSH/23/-/1
BS EN 1998:—
Eurocode 8. Design of structures for earthquake resistance
BS EN 1998-2:2005/Amendment 1
Bridges
B/525/8
BS EN ISO 5674 (Revision)
Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive- shafts. Strength and wear tests and acceptance criteria
will supersede BS EN ISO 5674:2006
AGE/6
BS EN ISO 8362:—
Injection containers and accessories
BS EN ISO 8362-6
Caps made of aluminium-plastics combinations for injections vials
CH/212
BS EN 10223:—
Steel wire and wire products for fences
BS EN 10223-1 (Revision)
Zinc and zinc alloy coated steel barbed wire will supersede BS EN 10223-1:1998
ISE/26
BS 8902
Responsible sourcing of construction products. Specification SDS/1/6 BS EN 71:— Safety of toys BS EN 71-1:2005+A6:2008/Amendment 10
Mechanical and physical properties
CW/15
BS EN 71-1:2005+A6:2008/Amendment 11
Mechanical and physical properties
CW/15
BS EN WI 00192046
Fire-fighting. Test methods
FSH/17
BS EN WI 00305109
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
FSH/23/-/1
DD CEN/TS WI 00352007
Guide to labelling of manufactured nanoparticles and products containing manufactured nanoparticles
NTI/1
BS EN WI CST02083
Structural design and verification of pressure vessels
ACE/68
BS EN 594 (Revision)
Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
will supersede BS EN 594:1996
B/518
BS EN 774:1996/Amendment 4
Garden equipment. Hand held, integrally powered hedge trimmers. Safety
AGE/20
BS EN 1147 (Revision)
Portable ladders for fire service use will supersede BS EN 1147:2001
FSH/17
BS EN ISO 1513 (Revision)
Paints and varnishes. Examination and preparation of samples for testing will supersede BS EN ISO 1513:1995
STI/10
BS EN 1555:—
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
BS EN 1555-1 (Revision)
General
will supersede BS EN 1555-1:2002
PRI/88/2
BS EN 13795:—
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment
BS EN 13795-1:2002/Amendment 1
General requirements for manufacturers, processors and products
CH/210/1
BS EN 13795-1:2002/Amendment 2
General requirements for manufacturers, processors and products
CH/205/1
BS EN 13795-2:2004/Amendment 1
Test methods
CH/205/1
BS EN 13795-3:2006/Amendment 1
Performance requirements and performance levels
CH/205/1
BS EN 14033:—
Railway applications. Track
BS EN 14033-1
Railbound construction and maintenance machines
RAE/2
BS EN 14034:—
Determination of explosion characteristics of dust clouds
BS EN 14034-4:2004/Amendment 1
Determination of the limiting oxygen concentration LOC of dust clouds
FSH/23/-/1
BS EN 14067:—
Railway applications. Aerodynamics
BS EN 14067-4:2005/Amendment 1
Requirements and test procedures for aerodynamics on open track
RAE/1/-/4
PD CEN/TR 14383:—
Prevention of crime. Urban planning and building design
PD CEN/TR 14383-7
Design and management of public transport facilities
B/562
BS EN 14491 (Revision)
Dust explosion venting protective systems will supersede BS EN 14491:2006
FSH/23/-/1
BS EN 14618 (Revision)
Agglomerated stone. Terminology and classification
will supersede BS EN 14618:2005
B/545
BS EN 13074-2
Stabilisation of binder from bituminous emulsion or cut-back or fluxed bitumen after recovery
will supersede BS EN 14895:2006, BS 2000-542:2006
PTI/13
BS EN 13245:—
Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications
BS EN 13245-1 (Revision)
Designation of light coloured profiles will supersede BS EN 13245-1:2004
PRI/82
BS EN 13445:—
Unfired pressure vessels
BS EN 13445-
4:2002+A2:2006/Amendment 4
Fabrication
PVE/1
BS EN 13480:—
Metallic industrial piping
BS EN 13480-3:2002/Amendment 3
Design and calculation
PVE/10
BS EN 13544:—
Respiratory therapy equipment
BS EN 13544-1:2007/Amendment 1
Nebulizing systems and their components
CH/121
BS EN ISO 13628:—
Petroleum and natural gas industries. Design and operation of subsea production systems
BS EN ISO 13628-16
Specification for flexible pipe ancillary equipment
PSE/17/-/4
BS EN ISO 13628-17
Guidelines for flexible pipe ancillary equipment
PSE/17/-/4
BS EN 13726:—
Test methods for primary wound dressings
BS EN 13726-1:2002/Amendment 1
Aspects of absorbency
CH/205/1
BS EN 13726-2:2002/Amendment 1
Moisture vapour transmission rate of permeable film dressings
CH/205/1
BS EN 13743 (Revision)
Safety requirements for coated abrasives will supersede BS EN 13743:2002
MTE/13
BS EN 12602:2008/Amendment 1
Prefabricated reinforced components of autoclaved aerated concrete
B/523
BS EN 12808:—
Adhesives and grouts for tiles
BS EN 12808-4 (Revision)
Determination of shrinkage will supersede BS EN 12808-4:2002
B/539
BS EN 12846:—
Bitumen and bituminous binders.
Determination of efflux time by the efflux viscometer BS EN 12846-1 Bituminous emulsions will supersede BS EN 12846:2002, BS 2000- 484:2003 PTI/13 BS EN 12846-2
Cut-back and fluxed bituminous binder will supersede BS EN 13357:2002, BS 2000- 502:2002
PTI/13
BS EN 12864:2001/Amendment 3
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4kg/h, and their associated safety devices for butane, propane or their mixtures
GSE/24
BS EN 12953:—
Shell boilers
BS EN 12953-6 (Revision)
Requirements for equipment for the boiler will supersede BS EN 12953-6:2002
PVE/2
BS EN 13044:—
Swap bodies. Marking
BS EN 13044-1
Markings for identification will supersede BS EN 13044:2001
TW/1
BS EN 13044-2
Markings related to rail operation will supersede BS EN 13044:2001
TW/1
BS EN 13044-3
Other operational marks will supersede BS EN 13044:2001
TW/1
BS EN 13074:—
Bitumen and bituminous binders
BS EN 13074-1
Recovery of binder from bituminous emulsion or cut-back or fluxed bitumen by evaporation will supersede BS EN 13074:2002,
BS 2000-493:2002
PTI/13