• No results found

Draft British Standards for Public Comment continued continued

In document Bs Standard Quick Reference (Page 51-53)

Draft British Standards for Public Comment

continued...continued...

46

08/30184648 DC

BS EN 15859Air quality. Certification of

automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures

EH/2/4

08/30185056 DC

BS EN 15861Food processing machinery.

Smoke facilities. Safety and hygiene requirements

MCE/3/5

Comments for the above document are required by  5 January, 2009

08/30185760 DC

BS EN 615 Fire protection. Fire extinguishing

media. Specifications for powders (other than class D powders)

FSH/18/4

08/30185776 DC

BS EN 1317-5 AMD2Road restraint systems.

Part 5. Product requirements and evaluation of conformity for vehicle restraint systems

B/509/1

08/30186436 DC

BS EN 15869-1Inland navigation vessels.

Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 1. General requirements

SME/32/-/7

08/30186439 DC

BS EN 15869-2Inland navigation vessels.

Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 2. Onshore unit, safety requirements

SME/32/-/7

08/30186443 DC

BS EN 15869-3Inland navigation vessels.

Electrical Shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 3. On-board unit, safety requirements

SME/32/-/7

08/30186460 DC

BS EN 13999-4 AMD1Adhesives. Short term

method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Part 4. Determination of volatile diisocyanates

PRI/52

Comments for the above document are required by   31 January, 2009

08/30186463 DC

BS EN 13999-3 AMD1Adhesives. Short term

method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Part 3. Determination of volatile aldehydes

PRI/52

Comments for the above document are required by   31 January, 2009

08/30184303 DC

BS EN 12952-3Water-tube boilers and

auxiliary installations. Part 3. Design and calculation for pressure parts

£18.00 members, £36.00 non-members

PVE/2

Comments for the above document are required by  7 January, 2009

08/30184309 DC

BS EN 12952-5 Water-tube boilers and

auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler

PVE/2

08/30184312 DC

BS EN 12952-6 Water-tube boilers and

auxiliary installations. Part 6. Inspection during construction. documentation and marking of pressure parts of the boiler

PVE/2

08/30184618 DC

BS EN 1824Road marking materials. Road

trials

B/509/2

08/30184621 DC

BS EN 1423Road marking materials. Drops on

materials. Glass beads, antiskid aggregates and mixtures of the two

B/509/2

08/30184624 DC

BS EN 13197 Road marking materials. Wear

simulator. Turntable

B/509/2

08/30184627 DC

BS EN 13459Road marking materials.

Sampling from storage and testing

B/509/2

08/30184630 DC

BS EN 12802Road marking materials.

Laboratory methods for identification

B/509/2

08/30184633 DC

BS EN 1871Road marking materials.

Laboratory methods for identification

B/509/2

08/30184636 DC

BS EN 1790 Road marking materials.

Preformed road markings

B/509/2

08/30184639 DC

BS EN 13212Road marking materials.

Requirements for factory production control

B/509/2

08/30184645 DC

BS EN 15860 Plastics. Thermoplastic semi-

finished products for machining. Requirements and test methods

PRI/21

08/30181308 DC

BS ISO 2575 AMD6 Road vehicles. Symbols for

controls, indicators and tell-tales

AUE/12

Comments for the above document are required by   31 January, 2009

08/30183861 DC

BS EN 13732Food processing machinery. Bulk

milk coolers on farm. Requirements for performance, safety and hygiene

MCE/3/5

08/30184268 DC

BS EN 15649-4Floating leisure articles for use

on and in the water. Part 4. Additional specific safety requirements and test methods for Class B devices

SW/136

08/30184277 DC

BS EN 12561-1Railway applications. Tank

wagons. Part 1. Identification plates for tank wagons for the carriage of dangerous goods

RAE/1/-/9

08/30184280 DC

BS EN 12561-3Railway applications. Tank

wagons. Part 3. Bottom filling and emptying devices for gases liquefied under pressure

RAE/1/-/9

08/30184283 DC

BS EN 12561-4Railway applications. Tank

wagons. Part 4. Top devices for top emptying and filling of liquid products

RAE/1/-/9

08/30184286 DC

BS EN 12561-5 Railway applications. Tank

wagons. Part 5. Top devices for bottom emptying and top filling of liquid products

RAE/1/-/9

08/30184289 DC

BS EN 12561-6 Railway applications. Tank

wagons. Part 6. Manholes

RAE/1/-/9

08/30184292 DC

BS EN 12561-7 Railway applications. Tank

wagons. Part 7. Platforms and ladders

RAE/1/-/9

08/30184296 DC

BS EN 12561-8Railway applications. Tank

wagons. Part 8. Heating connections

RAE/1/-/9

08/30184300 DC

BS EN 12952-2Water-tube boilers and

auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

PVE/2

Comments for the above document are required by  7 January, 2009

08/30189644 DC

BS ISO 28198Animal and vegetable fats and

oils. Determination of toluene insoluble matter

AW/307

08/30189740 DC

BS ISO IEC 24791-1Information technology.

Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 1. Architecture

IST/34

08/30189750 DC

BS EN 4675 Aerospace series. Titanium. Ti 5Al

5Mo 5V 3Cr 0.4Fe. 1300 MPa≤Rm≤1400 MPa. Bars. De < 110 mm

ACE/61/-/49

08/30189753 DC

BS EN 50377-13-2Connectors sets and

interconnect components to be used in optical fibre communication systems. Product

specifications. Part 13-2. Type LX.5-PC DUPLEX terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule Category U

GEL/86/2

08/30189758 DC

BS EN 50377-13-3Connectors sets and

interconnect components to be used in optical fibre communication systems. Product

specifications. Part 13-3. Type LX.5-APC DUPLEX terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule Category U

GEL/86/2

08/30189820 DC

BS EN ISO 8253-1Acoustics. Audiometric test

methods. Part 1. Basic pure-tone air and bone conduction threshold audiometry

EH/1/1

08/30189842 DC

BS ISO 11012Heavy commercial vehicles and

buses. Open-loop test methods for

quantification of on-centre handling. Weave test and transition test

AUE/15

08/30189871 DC

BS EN 62216 Digital terrestrial television

receivers for the DVT-B system

£18.00 members, £36.00 non-members

EPL/100

08/30189878 DC

BS EN 60064 AMD5 Tungsten filament lamps

for domestic and similar general lighting purposes. Performance requirements. General

CPL/34/1

08/30189882 DC

BS EN 60630 AMD6 Maximum lamp outlines

for incandescent lamps

CPL/34/1

08/30189288 DC

BS EN 61076-2-107 Connectors for electronic

equipment. Product requirements. Part 2-107. Detail specification for circular hybrid

connectors M12 with electrical and fibre-optic contacts with screw locking

EPL/48

Comments for the above document are required by  14 November, 2008

08/30189315 DC

BS EN ISO 12099Animal feedstuffs, cereals

and milled cereal products. Guidelines for the application of near infrared spectrometry

AW/10

08/30189351 DC

BS EN 60793-1-41Optical fibres. Part 1-41.

Measurement methods and test procedures. Bandwidth

GEL/86/1

Comments for the above document are required by  14 November, 2008

08/30189407 DC

BS EN 61512-4Batch control. Part 4. Batch

production records

GEL/65/1

08/30189427 DC

BS ISO/IEC 29141Information technology.

Tenprint Capture using BioAPI

IST/44

08/30189438 DC

BS ISO 28499-1Buffalo hides and buffalo calf

skins. Part 1. Description of defects

TCI/69

08/30189441 DC

BS ISO 28499-2Buffalo hides and buffalo calf

skins. Part 2. Grading on the basis of mass and size

TCI/69

08/30189444 DC

BS ISO 28499-3Buffalo hides and buffalo calf

skins. Part 3. Grading on the basis of defects

TCI/69

08/30189484 DC

BS EN ISO 9117-2Paints and varnishes. Drying

tests. Part 2. Pressure test for stackability

STI/10

08/30189495 DC

BS EN ISO 9117-3Paints and varnishes. Drying

tests. Part 3. Surface-drying test using ballotini

STI/10

08/30189531 DC

BS EN 1999-1-1 AMD1Eurocode 9. Design of

aluminium structures. Part 1-1. General structural rules

B/525/9

08/30189631 DC

BS EN 50215 Railway applications. Rolling

stock. Testing of rolling stock on completion of construction and before entry into service

GEL/9

08/30186909 DC

BS EN 255-3Air conditioners. Liquid chilling

packages and heat pumps with electrically driven compressors. Heating mode. Part 3. Testing and requirements for marking for domestic hot water units

RHE/17

08/30186944 DC

BS EN 12269-2Determination of the bond

behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Part 2. Long term test

B/523

08/30187544 DC

BS EN 13765 Thermoplastic multi-layer (non-

vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification

PRI/66

Comments for the above document are required by   31 January, 2009

08/30188327 DC

BS ISO 10935 Microscopes. Interfacing

connection type C

CPW/172/5

08/30188907 DC

BS EN 1317-6 Road restraint systems.

Pedestrian restraint systems. Part 6. Pedestrian parapet

B/509/1

08/30188936 DC

BS EN ISO 16610-21Geometrical product

specifications (GPS). Filtration. Part 21. Linear profile filters. Gaussian filters

TDW/4

08/30189214 DC

BS EN 55016-1-1 AMD1Specification for radio

disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus

GEL/210/12

08/30189220 DC

BS EN 55016-2-1 AMD1Specification for radio

disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of

measurement of disturbances and immunity. Conducted disturbance measurements

GEL/210/12

08/30189231 DC

BS EN 55016-2-2 AMD1Specification for radio

disturbance and immunity measuring apparatus and methods. Part 2-2. Methods of

measurement of disturbances and immunity. Measurement of disturbance power

GEL/210/12

08/30189237 DC

BS EN 55016-2-3 AMD2Specification for radio

disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of

measurement of disturbances and immunity. Radiated disturbance measurements

GEL/210/12

In document Bs Standard Quick Reference (Page 51-53)

Related documents