The following list gives an overview about all Button Control properties in the HTML View of an HTML page.
Table 1: HTML properties of Button Control
Property Range Meaning/Reference
Scheme String Scheme
(see also section ’Button control - General 3 page’ on page 99)
ImageUp String Button up graphic
(see also section ’Button control - Graphic page’ on page 105)
Button Control - Property Listing Controls
Icon String Icon for the active
button
(up/down/pressed) (see also section ’Button control - Icon page’ on page 108)
ImageDown String Button down graphic
(see also section ’Button control - Graphic page’ on page 105)
ImagePressed String Button pressed graphic
(see also section ’Button control - Graphic page’ on page 105)
ImageDisabled String Button disabled graphic
(see also section ’Button control - Graphic page’ on page 105)
IconDisabled String Icon for the disabled
button
(see also section ’Button control - Icon page’ on page 108) ImageUpDefault 0: do not use default
graphic
1 (default): Use default graphic from registry
Use of default graphic (see also section ’Button control - Graphic page’ on page 106) ImagePressedDefault 0: do not use default
graphic
1 (default): Use default graphic from registry
Use of default graphic (see also section ’Button control - Graphic page’ on page 106)
Controls Button Control - Property Listing
ImageDownDefault 0: do not use default graphic
1 (default): Use default graphic from registry
Use of default graphic (see also section ’Button control - Graphic page’ on page 107) ImageDisabledDefault 0: do not use default
graphic
1 (default): Use default graphic from registry
Use of default graphic (see also section ’Button control - Graphic page’ on page 107)
IconAlignX 0 - 32787 (default is 5) X-position of icon on a button (see also section ’Button control - Icon page’ on page 109) IconAlignY 0 - 32787 (default is 5) Y-position of icon on a
button (see also section ’Button control - Icon page’ on page 109) IconXCentered 0: Icon not centered
1 (default): Icon centered
Possibility to center icon in x direction (see also section ’Button control - Icon page’ on page 109)
IconYCentered 0: Icon not centered 1 (default): Icon centered
Possibility to center icon in y direction (see also section ’Button control - Icon page’ on page 109)
FieldID 0 - 32787 Unique ID of Button
(see also section ’Button control - General 2 page for function keys’ on page 86)
Button Control - Property Listing Controls
Href String HTML page to navigate
to when button is pressed (see also section ’Button control - General 2 page for selection buttons’ on page 92)
ViewState 0 (default): Button up 1: Button pressed 2: Button disabled 3: Button hidden
State of button (see also section ’Button control - General 1 page’ on page 84) RTViewState String, created
automatically:
[#Var_FunctionValue_ Viewstate_s#]
Viewstate during runtine, if variable is available. This property weights more than
ViewState (see also
section ’Hiding controls with Viewstate variables’ on page 274) Softkey F1 (default) - F8, 0 - 9, L, R, Cancel, Confirm, Correct, Help, Print, none
Connected softkey (see also section ’Button control - General 2 page for function keys’ on page 86)
Selection 0: do not use
1 (default): Functionkey 2: Selection Button 3: Radio Button
Type of Button (see also section ’Button control - General 1 page’ on page 81)
Controls Button Control - Property Listing
HTMLStepSwitch 0 (default): Step after Button
1: HTML Page
Selection of button action (see also section ’Button control - General 2 page for selection buttons’ on page 92)
Function String User defined name of
button, read from the registry. Used to locate
FunctionValue from
registry (see also section ’Button control - General 2 page for function keys’ on page 85) or (see also section ’Button control - General 2 page for selection buttons’ on page 91) or (see also section ’Button control - General 2 page for radio buttons’ on page 97)
FunctionValue String, (default is TEMP)
String to identify the button from the steps (see also section ’Button control - General 2 page for function keys’ on page 85)
Identification 0 (default): do not change
not used any longer
Button Control - Property Listing Controls
RadioButtonName String Selected radio Button
that belongs to the radio button group (see also section ’Button control - General 2 page for radio buttons’ on page 98)
ChipCard 0 (default): do not
change
not used any longer HoldPressedState 0: no
1: yes
2 (default): default
Toggle (see also section ’Button control - General 1 page’ on page 83)
PressOffsetDefault 0: Do not read from registry
1 (default): read from registry
Default checkbox for Shift in pixels. (see also section ’Button control - General 1 page’ on page 84)
PressOffset 0 - 32787 (default is 3) Shift in pixels (see also section ’Button control - General 1 page’ on page 84)
AudioResponse Predefined String (see also section ’Button control - General 3 page’ on page 99)
Sound Response (see also section ’Button control - General 3 page’ on page 99) AdditionalFeatures Predefined String Used for showing
ampersands (see also section ’Show an ampersand (&) in Caption of a control’ on page 194)
Controls Button Control - Property Listing
HtmlWindow 0 (default): not in a new window
1: in a new window
page to navigate to will show up ’in a new window’ (see also section ’Button control - General 2 page for selection buttons’ on page 93)
HTMLxPos Smallest non
percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000
X coordinate for new window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
HTMLyPos Smallest non
percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000
Y coordinate for new window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
HTMLWidth Smallest non
percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000
Width for new window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
Button Control - Property Listing Controls
HTMLHeight Smallest non
percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000
Height for new window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
Text String Button caption (see
also section ’Button control - Caption page’ on page 101)
PosXYDefault 0: enter x,y position in control
1 (default): read x,y position from registry
default checkbox for caption position (see also section ’Button control - Caption page’ on page 104)
TextAlignX -32788 - 32787
Default: 0
Caption X position (see also section ’Button control - Caption page’ on page 103)
TextAlignY -32788 - 32787
Default: 0
Caption Y position (see also section ’Button control - Caption page’ on page 103)
XCentered -1 (default): do not change
Not used any longer
TextAlignXTyp 0: left
1 (default): center 2: right
X position alignment (see also section ’Button control - Caption page’ on page 103)
Controls Button Control - Property Listing
YCentered 0: use TextAlignY
1 (default): centered
Y position alignment (see also section ’Button control - Caption page’ on page 104) FontDefault 0: Use Font properties
1 (default): Use properties from registry
Font default check box (see also section ’Button control - Caption page’ on page 105)
Font String: Name of Font Fontname (see also
section ’Button control - Caption page’ on page 104) FontCodePage 0 (default) - 32787
Number of codepage for Font
Font code page. Please pick the right number up in a button control in Frontpage (see also section ’Button control - Caption page’ on page 104)
TextSize 1 - 32787 (default is 12) Font Size (see also section ’Button control - Caption page’ on page 104)
TextBold 0: regular
1 (default): Bold
Font characteristic Bold (see also section ’Button control - Caption page’ on page 104) TextItalic 0 (default): Regular
1: Italic
Font characteristic Italic (see also section ’Button control - Caption page’ on page 104)
Button Control - Property Listing Controls
TextUnderline 0 (default): Regular 1: Underline
Font characteristic Underline (see also section ’Button control - Caption page’ on page 104) TextStrikeout 0 (default): Regular
1: Strikeout
Font characteristic Strikeout (see also section ’Button control - Caption page’ on page 104) ActiveColourDefault 0: Use TextColour
1 (default): Use TextColour from registry
Colour active default checkbox (see also section ’Button control - Caption page’ on page 102) InactiveColourDefault 0: Use TextColourDis-
abled
1 (default): Use TextCo-
lourDisabled from
registry
Colour disabled default checkbox (see also section ’Button control - Caption page’ on page 103) TextColour 0 - 16777215 (default is
0)
Text colour for active text (see also section ’Button control - Caption page’ on page 102) TextColourDisabled 0 - 16777215 (default is
8421504)
Text colour for inactive text (see also section ’Button control - Caption page’ on page 103)
TextLayerCount 1 - 32787 (default is 1) Number of Text Layer (see also section ’Button control - Caption page’ on page 101)
Only edit the following TextLayer... properties, if TextLayoutCount is greater than 1. Use ;; as separator for each layers value.
Controls Button Control - Property Listing
TextLayerText String Button caption for
different layers. (see also section ’Button control - Caption page’ on page 101)
TextLayerPosXYDe- fault
0: enter x,y position in control
1 (default): read x,y position from registry
default checkbox for caption position for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerTextAlignX -32788 - 32787 Default: 0
Caption X position for different layers. (see also section ’Button control - Caption page’ on page 103)
TextLayerTextAlignY -32788 - 32787 Default: 0
Caption Y position for different layers. (see also section ’Button control - Caption page’ on page 103)
TextLayerXCentered -1 (default): do not change
Not used any longer TextLayerText-
AlignXTyp
0: left
1 (default): center 2: right
3: use this for shadowing effect
X position alignment for different layers. (see also section ’Button control - Caption page’ on page 103). If shadowing efect shall be used, use TextLay-
erTextAlignX and TextLayerTextAlignY
for shadow offset (see also section
’Shadowing effect of control capture’ on page 195).
Button Control - Property Listing Controls
TextLayerYCentered 0: use TextLayerText-
AlignY
1 (default): centered
Y position alignment for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerFontDefault 0: Use Font properties 1 (default): Use properties from registry
Font default check box for different layers. (see also section ’Button control - Caption page’ on page 105)
TextLayerFont String: Name of Font Fontname for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerFont- CodePage 0 (default) - 32787 Number of codepage for Font
Font code page for different layers. Please pick the right number up in a button control in Frontpage (see also section ’Button control - Caption page’ on page 104)
TextLayerTextSize 1 - 32787 (default is 12) Font Size for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerTextBold 0: regular
1 (default): Bold
Font characteristic Bold for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerTextItalic 0 (default): Regular 1: Italic
Font characteristic Italic for different layers. (see also section ’Button control - Caption page’ on page 104)
Controls Button Control - Property Listing TextLayerText- Underline 0 (default): Regular 1: Underline Font characteristic Underline for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerTextStrikeout 0 (default): Regular
1: Strikeout
Font characteristic Strikeout for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerActiveColour- Default 0: Use TextLayerText- Colour 1 (default): Use TextColour from registry
Colour active default checkbox for different layers. (see also section ’Button control - Caption page’ on page 102) TextLayerInactiveCo- lourDefault 0: Use TextColourDis- abled 1 (default): Use TextLayerTextColourD- isabled from registry
Colour disabled default checkbox for different layers. (see also section ’Button control - Caption page’ on page 103) TextLayerTextColour 0 - 16777215 (default is
0)
Text colour for active text for different layers. (see also section ’Button control - Caption page’ on page 102) TextLayerTextColourD- isabled 0 - 16777215 (default is 8421504)
Text colour for inactive text for different layers. (see also section ’Button control - Caption page’ on page 103)