The following list gives an overview about all Edit Control properties in the HTML View of an HTML page.
Table 2: HTML properties of Edit Control
Property Range Meaning/Reference
Scheme String Scheme
(see also section ’Button control - General 3 page’ on page 99)
ImageUp String Input field up graphic
(see also section ’Edit control - Graphic page’ on page 130)
Edit Control - Property Listing Controls
IconUp String Icon for the active input
field (up/pressed) (see also section ’Button control - Icon page’ on page 108)
ImagePressed String Input field pressed
graphic
(see also section ’Edit control - Graphic page’ on page 131)
ImageDisabled String Input field disabled
graphic
(see also section ’Edit control - Graphic page’ on page 131)
IconDisabled String Icon for the disabled
input field (see also section ’Button control - Icon page’ on page 108) ForbiddenLetter List of :00032 - :00255
values
List of ASCII codes of selected (forbidden) characters with syntax :nnnnn, where nnnnn is the ASCII code with leading zeroes (see also section ’Edit control - Not allowed character page’ on page 139)
BeepAtForbiddenLet- terInput
0 (default): Do not beep 1: Beep
Beep when pressing a not allowed character (see also section ’Edit control - Not allowed character page’ on page 139)
Controls Edit Control - Property Listing
PreliminaryInputFor- bidden
0 (default): Input variables will not be reset
1: Reset of Input variable at page load
Checkbox Don’t display preliminary input (see also section ’Edit control - Input page’ on page 133)
FunctionName String Name of transaction
this field is used in. Is reference to registry entry (see also section ’Edit control - General 1 page’ on page 123)
FieldName String Fieldname in this trans-
action. Is reference to registry entry (see also section ’Edit control - General 1 page’ on page 124)
FieldID String: Variable name
(please use suffix _S for input variables)
Variable name, which is automatically read from registry under key
FunctionName, FieldName (see also section ’Input variables’ on page 413)
FieldNumber 1 - 32787 Seq. No (see also
section ’Edit control - General 1 page’ on page 124)
SoftkeyValue F1 (default) - F8, none
Connected softkey (see also section ’Edit control - General 1 page’ on page 124)
Timeout 0 (no timer) - 32787
default is 600
Input Timeout (see also section ’Edit control - General 1 page’ on page 124)
Edit Control - Property Listing Controls
ConfirmInput 0 (default): Do not confirm
1: Confirm the input
Confirm input check box (see also section ’Edit control - General 2 page’ on page 127)
Beep 0 (default): do not beep
1: beep
Beep at the end of input check box (see also section ’Edit control - General 2 page’ on page 128)
CursorPosition 0 (default): caretpo- sition at start
1: caretposition at end
caretposition at end (see also section ’Edit control - General 2 page’ on page 128) CorrectHref0 String with syntax
nn:pagename like 8:Mypage.htm
HTML Page to navigate to at input errors from CCCheckFW. Each input error is filled seqencial into
CorrectHref0, ...Href1, ...Href2, ...(see also
section ’Edit control - General 1 page’ on page 126)
CorrectHref1 see CorrectHref0 see CorrectHref0
CorrectHref2 see CorrectHref0 see CorrectHref0
CorrectHref3 see CorrectHref0 see CorrectHref0
CorrectHref4 see CorrectHref0 see CorrectHref0
CorrectHref5 see CorrectHref0 see CorrectHref0
CorrectHref6 see CorrectHref0 see CorrectHref0
CorrectHref7 see CorrectHref0 see CorrectHref0
CorrectHref8 see CorrectHref0 see CorrectHref0
CorrectHref9 see CorrectHref0 see CorrectHref0
Controls Edit Control - Property Listing
CorrectWindow0 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref0 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow1 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref1 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow2 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref2 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow3 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref3 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow4 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref4 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow5 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref5 (see also
section ’Edit control - General 1 page’ on page 126)
Edit Control - Property Listing Controls
CorrectWindow6 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref6 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow7 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref7 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow8 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref8 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindow9 0 (default): not in a new window
1: in a new window
Checkbox in a new
window for
CorrectHref9 (see also
section ’Edit control - General 1 page’ on page 126)
CorrectWindowTop Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 54)
X coordinate for correct window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
Controls Edit Control - Property Listing
CorrectWindowLeft Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 44)
Y coordinate for correct window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
CorrectWindowWidth Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 712)
Width for correct window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
CorrectWindowHeight Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 260)
Height for correct window (see also section ’Button control - General 2 page for selection buttons’ on page 94)
ViewState 0 (default): Input field inactive
2: Input field disabled 3: Input field hidden
State of input field (see also section ’Edit control - General 2 page’ on page 127)
Edit Control - Property Listing Controls
RTViewState String, created automatically: [#Inputvariable(without _s)_Viewstate_S#] i.e. Input variable: DLG_INPUT_RESULT 1_S Viewstate Variable: DLG_INPUT_RESULT 1_VIEWSTATE_S Viewstate during runtine, if variable is available. This property weights more than
ViewState (see also
section ’Hiding controls with Viewstate
variables’ on page 274)
PressOffset 0 - 32787 (default is 3) Shift in pixels (see also section ’Edit control - General 2 page’ on page 127)
HelpHref String Href for help (see also
section ’Edit control - General 2 page’ on page 127)
HelpWindow 0 (default): show help page in current window 1: show help page in new, additional window
’in a new window’ for Href for help (see also section ’Edit control - General 2 page’ on page 127)
HelpWindowTop Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 54)
X coordinate for help window (see also section ’Edit control - General 2 page’ on page 127)
Controls Edit Control - Property Listing
HelpWindowLeft Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 44)
Y coordinate for help window (see also section ’Edit control - General 2 page’ on page 127)
HelpWindowWidth Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 712)
Width for help window (see also section ’Edit control - General 2 page’ on page 127)
HelpWindowHeight Smallest non percentage value = 0 Largest non percentage value = 9999 Smallest percentage value = 0% ' 10000 Largest percentage value = 100% ' 20000 (default is 260)
Height for help window (see also section ’Edit control - General 2 page’ on page 127)
Instruction String Instruction hint (see
also section ’Edit control - General 2 page’ on page 128) AudioResponse Predefined String (see
also section ’Button control - General 3 page’ on page 99)
Sound Response (see also section ’Button control - General 3 page’ on page 99)
Edit Control - Property Listing Controls
CaptionText String Caption text
CaptionAlignDefault 0: enter x,y position in control
1 (default): read x,y position from registry
default checkbox for caption position (see also section ’Button control - Caption page’ on page 104)
CaptionAlignX 0 - 32787 (default is 19) Caption X position (see also section ’Button control - Caption page’ on page 103)
CaptionAlignXTyp 0 (default): left 1: center 2: right
X position alignment (see also section ’Button control - Caption page’ on page 103)
CaptionAlignY 0 - 32787 (default is 6) Caption Y position (see also section ’Button control - Caption page’ on page 103)
CaptionCenterX 0 (default): do not change
Not used any longer CaptionCenterY 0 (default): use
CaptionAlignY
1: centered
Y position alignment (see also section ’Button control - Caption page’ on page 104) CaptionFontDefault 0: Use Font properties
1 (default): Use properties from registry
Font default check box (see also section ’Button control - Caption page’ on page 105)
CaptionFont String: Name of Font Fontname (see also section ’Button control - Caption page’ on page 104)
Controls Edit Control - Property Listing
CaptionSize 1 - 32787 (default is 10) Font Size (see also section ’Button control - Caption page’ on page 104) CaptionFontCodePage 0 (default) - 32787
Number of codepage for Font
Font code page. Please pick the right number up in an input field in Frontpage (see also section ’Button control - Caption page’ on page 104)
CaptionBold 0: regular
1 (default): Bold
Font characteristic Bold (see also section ’Button control - Caption page’ on page 104) CaptionUnderline 0 (default): Regular
1: Underline
Font characteristic Underline (see also section ’Button control - Caption page’ on page 104) CaptionItalic 0 (default): Regular
1: Italic
Font characteristic Italic (see also section ’Button control - Caption page’ on page 104) CaptionStrikeout 0 (default): Regular
1: Strikeout
Font characteristic Strikeout (see also section ’Button control - Caption page’ on page 104) CaptionColourDefault 0: Use CaptionColour
1 (default): Use
CaptionColour from
registry
Colour active default checkbox (see also section ’Button control - Caption page’ on page 102)
Edit Control - Property Listing Controls CaptionColourDis- abledDefault 0: Use CaptionColour- Disabled 1 (default): Use CaptionColourDis- abled from registry
Colour disabled default checkbox (see also section ’Button control - Caption page’ on page 103) CaptionColour 0 - 16777215 (default is
0)
Text colour for active caption (see also section ’Button control - Caption page’ on page 102) CaptionColourDisabled 0 - 16777215 (default is
8421504)
Text colour for inactive caption (see also section ’Button control - Caption page’ on page 103) InputJustified 0 (default): right
justified 1: left justified 2: Centered
Input orientation (see also section ’Edit control - Input page’ on page 132)
InputAlignX 0 - 32787 (default is 16) Input range X pos (see also section ’Edit control - Input page’ on page 133)
InputAlignY 0 - 32787 (default is 28) Input range Y pos (see also section ’Edit control - Input page’ on page 133)
InputWidth 0 - 32787 (default is 272)
Input range width (see also section ’Edit control - Input page’ on page 133)
InputHeight 0 - 32787 (default is 18) Input range height (see also section ’Edit control - Input page’ on page 133)
Controls Edit Control - Property Listing
InputLineMax 1 - 32787 (default is 1) Input limits - max. lines (see also section ’Edit control - Input page’ on page 133)
InputCharMax 1 - 32787 (default is 100)
Input limits - max chars. If max. lines is greater than 1 this is the maximum no a chars. added from all lines (see also section ’Edit control - Input page’ on page 132)
InputFont String: Name of Font Fontname (see also section ’Edit control - Input page’ on page 137) InputFontCodePage 0 (default) - 32787
Number of codepage for Font
Font code page. Please pick the right number up in an input field in Frontpage (see also section ’Button control - Caption page’ on page 104)
InputSize 1 - 32787 (default is 10) Font Size (see also section ’Button control - Caption page’ on page 104) InputBold 0 (default): regular
1: Bold
Font characteristic Bold (see also section ’Button control - Caption page’ on page 104) InputUnderline 0 (default): Regular
1: Underline
Font characteristic Underline (see also section ’Button control - Caption page’ on page 104)
Edit Control - Property Listing Controls
InputItalic 0 (default): Regular 1: Italic
Font characteristic Italic (see also section ’Button control - Caption page’ on page 104) InputStrikeout 0 (default): Regular
1: Strikeout
Font characteristic Strikeout (see also section ’Button control - Caption page’ on page 104) InputColour 0 - 16777215 (default is
0)
Text colour for active caption (see also section ’Edit control - Input page’ on page 134) InputColourDisabled 0 - 16777215 (default is
8421504)
Text colour for inactive caption (see also section ’Edit control - Input page’ on page 134) InputDirectFormatEn- abled 0 (default): Direct format inactive 1: Direct format active
Direct Format checkbox (see also section ’Edit control - Input page’ on page 134)
Controls Edit Control - Property Listing
InputDirectFor- matMask
CharPos1;;CharPos2;; CharPos3;;...
Each CharPos consists of: Byte1 - Writable: Yes=1/No =2 Byte2 - Visible: At input=1/Always=2 Byte3 - Character transformation: None=1/Uppercase= 2/Lowercase=3 Byte4 - Special: None=1/AmountEn- tryDDC=2 Byte5 - Pre-allocation: None=1/Any character=2/DateSepa- rator=3/TimeSepa- rator=4/Decimal- Symbol= 5/DigitGrouping- Symbol=6/Curren- cySymbol=7 Byte6 - Permitted characters: if Byte5=2 it contains the character, else Not used=0/All= 1/Numeric=2/Alpha= 3/AnyCharacters=9 Byte7 - If Byte5=2it contains a 0, else it contains first character from Permitted characters
Byte8 - ByteX: More Permitted characters
Direct format (see also section ’Edit control - Input page’ on page 134)
Please notice that not any combination of Byte settings is allowed. It is best to create the string in the property page. InputDirectFormatRT- Separators [#VAR_PCDIALOG_R T_SEPARATORS_S;;# ]
Separator for InputDi-
rectFormatMask, do
not change.
Edit Control - Property Listing Controls
IconAlignX 0 - 32787 (default is 0) X-position of icon on an input field (see also section ’Button control - Icon page’ on
page 109)
IconAlignY 0 - 32787 (default is 0) Y-position of icon on an input field (see also section ’Button control - Icon page’ on
page 109) IconCenterX 0: Icon not centered
1 (default): Icon centered
Possibility to center icon in x direction (see also section ’Button control - Icon page’ on page 109)
IconCenterY 0: Icon not centered 1 (default): Icon centered
Possibility to center icon in y direction (see also section ’Button control - Icon page’ on page 109)
PressOffsetDefault 0: Do not read from registry
1 (default): read from registry
Default checkbox for Shift in pixels. (see also section ’Edit control - General 2 page’ on page 127)
InputAreaDefault 0: Do not read from registry
1 (default): read from registry
Input range default (see also section ’Edit control - Input page’ on page 133)
InputFontDefault 0: Do not read from registry
1 (default): read from registry
Font button, default check box (see also section ’Edit control - Input page’ on page 137)
Controls Edit Control - Property Listing
InputColourDefault 0: Use InputColour 1 (default): Use Input-
Colour from registry
Colour active default checkbox (see also section ’Edit control - Input page’ on page 134) InputColourDisabled- Default 0: Use InputColourDis- abled
1 (default): Use Input-
ColourDisabled from
registry
Colour disabled default checkbox (see also section ’Edit control - Input page’ on page 134) ImageUpDefault 0: Use Input field up
graphic
1 (default): Use graphic read from registry
Input field up, default check box (see also section ’Edit control - Graphic page’ on page 130) ImagePressedDefault 0: Use Input field
pressed graphic 1 (default): Use graphic read from registry
Input field pressed, default check box (see also section ’Edit control - Graphic page’ on page 131)
ImageDisabledDefault 0: Use Input field disabled graphic 1 (default): Use graphic read from registry
Input field disabled, default check box (see also section ’Edit control - Graphic page’ on page 131) CheckRoutine 0: No Check 1: Alphanumeric check 2: Numeric check 3: Date check 4: Amount check
Number of the check routine (see also section ’Standard input check dialogs’ on page 427) CheckParameter Depending on the
check routine. Filled during design time from CCCheckfw.dll. Please pick it up in Frontpage
Parameter from the check routines (see also section ’The Dialog() function’ on page 423)
Edit Control - Property Listing Controls
CheckDependencies Depending on the check routine. Filled during design time from CCCheckfw.dll. Please pick it up in Frontpage
Parameter from the check routines (see also section ’The Dialog() function’ on page 423)
AdditionalFeatures Predefined Strings Used for showing ampersands (see also section ’Show an ampersand (&) in Caption of a control’ on page 194), Masked Edit (see also section ’Masked edit for standard edit control’ on page 145), hiding of the caret (see also section ’Hide the caret in standard edit control’ on page 146), check of maximum characters press on EPP (see also section ’Check max. chars for EPP
keyboard’ on page 146) TextLayerCount 1 - 32787 (default is 1) Number of Text Layer
(see also section ’Button control - Caption page’ on page 101)
Only edit the following TextLayer... properties, if TextLayoutCount is greater than 1. Use ;; as separator for each layers value.
TextLayerText String Headline text for
different layers. (see also section ’Button control - Caption page’ on page 101)
Controls Edit Control - Property Listing
TextLayerPosXYDe- fault
0: enter x,y position in control
1 (default): read x,y position from registry
default checkbox for caption position for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerTextAlignX -32788 - 32787 Default: 19
Caption X position for different layers. (see also section ’Button control - Caption page’ on page 103)
TextLayerTextAlignY -32788 - 32787 Default: 6
Caption Y position for different layers. (see also section ’Button control - Caption page’ on page 103)
TextLayerXCentered 0 (default): do not change
Not used any longer TextLayerTex-
tAlignXTyp
0 (default): left 1: center 2: right
X position alignment for different layers. (see also section ’Button control - Caption page’ on page 103)
TextLayerYCentered 0 (default): use
TextLayerText-AlignY
1: centered
Y position alignment for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerFontDefault 0: Use Font properties 1 (default): Use properties from registry
Font default check box for different layers. (see also section ’Button control - Caption page’ on page 105)
Edit Control - Property Listing Controls
TextLayerFont String: Name of Font Arial is default
Fontname for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerFont- CodePage 0 (default) - 32787 Number of codepage for Font
Font code page for different layers. Please pick the right number up in a button control in Frontpage (see also section ’Button control - Caption page’ on page 104)
TextLayerTextSize 1 - 32787 (default is 10) Font Size for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerTextBold 0: regular
1 (default): Bold
Font characteristic Bold for different layers. (see also section ’Button control - Caption page’ on page 104)
TextLayerTextItalic 0 (default): Regular 1: Italic
Font characteristic Italic for different layers. (see also section ’Button control - Caption page’ on page 104) TextLayerTex- tUnderline 0 (default): Regular 1: Underline Font characteristic Underline for different layers. (see also section ’Button control - Caption page’ on page 104)
Controls The List control