Theproceduresinthis stepdescribeinstallationoftheTivoliStorageManager client,API,andstorage agentsoftware.
Install or Upgrade the Client and API Software
1. Check thattheclientsystem meetstheprerequisites forclientsoftware.Seethe Backup-ArchiveClientsInstallationandUser’sGuide.Install theclientsoftware and APIifnotalreadyinstalledonthesystem,orupgradethesoftwaretothelatest levelasnecessary. Thelatestlevelscanbe downloadedfromtheIBMTivoli StorageManagerWebsiteatwww.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManager.html.Ifyouareusingthestorageagentto supportmultiple clients,youmust installorupgradetheclientandAPI softwareoneachclientthatwillbesupported.
Tivoli Storage Manager Client Workstation Client - DATAOWNER
Storage Agent - STORAGNT
Tivoli Storage Manager Server - TSMSRVER dsm.sys file
dsmsta.opt file
define server serverpassword=fun4me hladdress=agent.tucson.ibm.com
lladdress=1500
register node bak2work domain=sandomain
storagnt
dataowner devconfig.out file set staname storagnt set stapassword xxxxxxx
set stahladdress agent.tucson.ibm.com
define server serverpassword=xxxxxxxx hladdress=tsmsrver.tucson.ibm.com
lladdress=1502 tsmsrver servername
devconfig
commmethod tcpip tcpport 1500
tsmsrver devconfig.out servername tsmsrver enablelanfree yes lanfreecommmethod tcpip
lanfreetcpserveraddress test.xyz.ibm.com lanfreetcpport 1500
comm
tcpserveraddress .tucson.ibm.com tcpport 1502
tsmsrver method TCPip
Figure7.Communicationsinformation.ResultsofSteps2.1and2.2.Thepasswordsare shownas″xxxxxxx″becausetheyareencryptedinthefile.
Chapter3.InstallingandConfiguringTape-LibraryandFile-DeviceSharingEnvironments 19
|
||
|
2. Besure youhavetheinformationrecordedontheformsin“Configuration InformationWorksheets”onpage13.Thisinformationisrequiredinthis procedure.
3. ModifytheTivoliStorageManageroptionsfile(dsm.sys).Forinformation aboutthedsm.optand dsm.sysfiles,seetheBackup-ArchiveClientsInstallation and User’sGuide.
a. Locatetheoptionsfileandopenit.Thefilecouldbe locatedinoneof severalplaces,suchastheinstallationdirectory,orpointed tobyan environmentvariable.
b. SpecifytheTivoliStorageManagerservername.Thisinformationwillcome fromtheclientsystemandserversystem configuration-information
worksheets.Forexample:
servername tsmsrver
c. Specifythecommunicationsmethodbetweentheclientandserver.Again, thisinformationwillcomefromtheclientsystemandserversystem configuration-informationworksheets,aswilltheinformationforthenext steps.For example:
COMMmethod TCPip
TCPServeraddress tsmsrver.tucson.ibm.com TCPPort 1502
Note: ATCPPORT of1502isusedintheexamples;however,thedefault TCPPORTis1500.
Keepthefileopenforthenextstep.
4. Addthefollowingoptionstothesamedsm.sys stanzaeditedinstep3c.These optionsspecifythattheclientwilluseSAN-attached deviceswhenthepathis available,during backup,restore,archive,and retrieveprocessing.
enablelanfree yes LANFREECommmethod TCPIP
LANFREETCPServeraddress test.xyz.company.com LANFREETCPPort 1500
or
enablelanfree yes
LANFREECommmethod SharedMem LANFREESHMPORT 1510
5. Editthedsm.opt filetospecifytheservernamethatyouaddedtothedsm.sys fileinstep3b.Inthisexample:
servername tsmsrver
Install and Configure the Storage Agent
Attention:
Refer totheREADMEfileshippedontheproductmediaforthemostcurrent informationregardinginstallingandconfiguringthestorageagent.
|
|
|
|
|
|
NotethatthestorageagenthonorstheTivoliStorageManagerserverenvironment variablesDSMSERV_CONFIGandDSMSERV_DIR.
Install thestorage agentonaclient thathasconnectionstothestorage resourceson theSAN.Thedefaultinstallationdirectoryis/opt/tivoli/tsm/StorageAgent/bin.
1. Besure youhavetheinformationrecordedontheformsin“Configuration InformationWorksheets”onpage13.Thisinformationisrequiredinthis procedure.
2. Loginastherootuser.
3. LoadthestorageagentCDintotheselecteddrive.
4. Enterthefollowingcommandfora listofpackagesthatyoucaninstall:
/usr/sbin/pkgadd -d /cdrom/cdrom0
InthisexampletheCD-ROMnameis/cdrom/cdrom0;yoursmaybe different.
Youcanmakemultipleselectionsat thisstep.Thepackagesare:
TIVsmSsta
Thestorageagentapplicationisinstalled.
TIVsmSdev
Thedevicedriverpackagefornon-IBMdevices isinstalled.
ThePKGADDcommandloadstheselectedfiles.
Notes:
a. Loadingthestorageagentfilescantakeseveralminutes, anditmaytakea fewminutesfortheinstallationtobeginaftertheserverpackagehasbeen selected.
b. Theinstallationprogramautomaticallyinstallsthestorageagentbasedon thelevelofSunSolarisontheinstallationmachine.
5. Enter″y″whenthesystem issuesthismessage:
This package contains scripts which will be executedwith super-user (root) permission during the process of installing thepackage.
Do you want to continue with the installation ofthis package?
6. Enterthefollowingcommandsfroma rootusercommandprompttoejectthe CD,aftertheinstallationiscomplete:
cd / eject cdrom
7. EnsurethattheDEVCONFIGoptionisspecifiedinthedsmsta.optfile.For example,foradeviceconfigurationfilenameddevconfig.outlocated /opt/tivoli/tsm/StorageAgent/bin,editthedsmsta.opt fileand enterthe followingline:
DEVCONFIG devconfig.out
8. Usetheinformationthatyoucollectedinstep1 toissuetheDSMSTA SETSTORAGESERVERcommand.For example:
dsmsta setstorageserver myname=storagnt mypassword=fun4me myhladdress=agent.tucson.ibm.com
servername=tsmsrver serverpassword=not4u
hladdress=tsmsrver.tucson.ibm.com lladdress=1502
See“AddingCommunicationInformationfortheStorageAgent”onpage40 fordetailsaboutthecommandparameters.
Chapter3.InstallingandConfiguringTape-LibraryandFile-DeviceSharingEnvironments 21
|
|
Thecommandgeneratesthefollowinglinesin thedeviceconfigurationfilefor thestorageagent:
SET STANAME storagnt SET STAPASSWORD xxxxxxx
SET STAHLADDRESS agent.tucson.ibm.com
DEFINE SERVER tsmsrver serverpassword=xxxxxxxxxxx HLADDRESS=tsmsrver.tucson.ibm.com LLADDRESS=1502
Thepasswords(shown hereasxxxxxxxx)areencryptedinthefile.
Thecommandalsogeneratesthefollowinglinein thedsmsta.optfile:
SERVERNAME tsmsrver
See“TheStorageAgentOptionsFile”onpage42and “TheDevice
ConfigurationFilefortheStorageAgent”onpage45fordetailsaboutthese files.