Use this function to set whether and for how long you would like the interior light- ing to remain lit during darkness after the SmartKey is removed from the starter switch.
왘 Move the selection marker with theæ orç button to the Light- ing submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Interior lamp delayed shut-off.
The selection marker is on the current setting.
왘 Pressæ orç to select the de- sired lamp-on time period. You can se- lect:
앫 0 s, the delayed shut-off feature is deactivated.
앫 5 s,10 s, 15 s or 20 s, the delayed shut-off feature is activated.
Vehicle submenu
Access the Vehicle submenu via the Set- tings menu. Use the Vehicle submenu to make general vehicle settings. The follow- ing functions are available:
Setting automatic locking
Use this function to activate or deactivate the automatic central locking. With the au- tomatic central locking system activated, the vehicle is centrally locked at vehicle speeds of approximately 9 mph (15 km/h).
Function Page
Set automatic locking 149
Limiting opening height of trunk lid*
Control system
왘 Move the selection marker with theæ orç button to the Vehi- cle submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Automatic door lock.
The selection marker is on the current setting.
왘 Pressæ orç to switch Automat- ic door lockon or off.
Limiting opening height of trunk lid* Use this function to activate or deactivate the limiting opening height of trunk lid. 왘 Move the selection marker with
theæ orç button to the Vehi- cle submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Opening limiter trunk lid. The selection marker is on the current setting.
Convenience submenu
Access the Convenience submenu via the Settings menu. Use the Convenience sub- menu to change the settings for a number of convenience features. The following functions are available:
Activating easy-entry/exit feature* Use this function to activate and deacti- vate the easy-entry/exit feature. When the feature is activated, the steering wheel
Function Page
Activate easy-entry/exit feature 150
Set SmartKey-dependency 152
Set parking position for exterior rear view mirror
Controls in detail
Control system
After entering the vehicle, the steering wheel and seat will move into the position stored in memory when
앫 the driver’s door is closed
앫 you put the SmartKey in the starter switch or press the KEYLESS-GO start/stop button*
앫 you press the appropriate stored posi- tion button on the memory switch (컄page 117).
왘 Move the selection marker with theæ orç button to the Convenience submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Function Easy-entry feature. The selection marker is on the current setting.
왘 Pressæ orç to change the easy-entry/exit setting.
The following settings are available for the easy-entry/exit feature
Warning!
G
You must make sure that no one can be- come trapped or injured by the moving steering wheel and the driver’s seat when the easy-entry/exit feature is in operation and the driver’s door is being opened or the SmartKey is removed from the starter switch.
Do not leave children unattended in the ve- hicle, or with access to an unlocked vehicle. Children could open the driver’s door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or personal injury.
i
To cancel seat/steering wheel move- ment, do one of the following: 앫 Press seat adjustment switch
(컄page 35).
앫 Move the steering column stalk (컄page 37).
앫 Press the memory button (컄page 117).
off The
easy-entry/exit feature is deactivat- ed
Steering col. Only the steering column is moved. Steering col. +
seat
Both the steering column and the seat are moved.
Control system
Setting SmartKey-dependency
Use this function to set whether the mem- ory settings for the seats, the steering wheel, the mirrors and other settings of the control system should be stored sepa- rately for each SmartKey (컄page 88). 왘 Move the selection marker with
theæ orç button to theConvenience submenu.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Key-dependent.
The selection marker is on the current setting.
Setting parking position for exterior rear view mirror
Use the Mirror adjustment parking aid function to select whether the passen- ger-side exterior rear view mirror should be turned downward during parking maneu- vers when reverse gearR is engaged. For additional information, see “Activating ex- terior rear view mirror parking position” (컄page 168).
왘 Move the selection marker to the Convenience submenu using theæ orç button.
왘 Press buttonj ork repeatedly until you see this message in the dis- play: Mirror adjustment parking aid. The selection marker is on the current
왘 Pressæ orç to switch function on or off.
Dynamic seat* submenu
Access the Dynamic Seat submenu via the Settings menu. Use the Dynamic Seat submenu to change the settings for the dy- namic seats. The following functions are available:
Function Page