Atlas Copco ROC F9CR production drill rig is fitted with the COPROD system.
COP 2000CR series rock drills are designed for the 90 -127 mm hole range.
Section of COPROD drill string shows the floating impact rod within the drill pipe.
Business end of the ROC F7CR, an engineering masterpiece.
COPROD DRILL RIG SPECIFICATION
Drilling in open pit mining 111
The ROC F7CR is available with a single boom ideal for quarrie. The ROC F7CR is equipped with a double drill pipe support and an ergonomically designed cabin.
Standard equipment
Reduced impact pressure mechanism, Antijamming system, Automatic feed-force control (RPC-F), Fuel saving device, Two-speed traction, Dust collector and pre-separator, Double hydraulic drill pipe support,
with break-out table, Rod handling system (7+1 sections), Feed extension, Heavy duty tracks, Operator’s cabin, ROPS and FOPS approved, Air fl ow control switch, Air conditioner
Optional Equipment
Hydraulic winch, Hydraulic support leg, Electric refuelling pump, Anti-freeze equipment for compressed air, heater, Electronic hole depth and inclination in-strument, Central lubrication system, Water mist system
ROC F7CR
Main specifi cations
Visit www.surfacedrilling.com for more information Recommended hole range
CR76, CR89 90-127 mm 3½" - 5"
Hole depth 28 m approx. 92'
Hydraulic rock drill COP 2150CR
Impact power 21 kW 28.1 HP
Atlas Copco XAH2 screw compressor
Working pressure 10.5 bar 152 psi
FAD 148 l/s 314 cfm
Engine
Caterpillar Diesel CAT 3126B
Rating at 2000 rpm 186 kW 253 HP
Boom variants single boom Fuel tank
Capacity 400 l 100 US gal.
FeedFeed length, total 8100 mm 26'7"
Travel length 4770 mm 15'8"
Feed rate max. 0.92 m/s 180 ft/min
Feed force, max. 20 kN 4500 lbf
Tramming
Travel speed, max. 3.6 km/h 2.2 mph
Traction force 112 kN 25200 lbf
Hill climbing ability, without winch 20° 20º Hill climbing ability, with winch 35º 35º
Track oscillation ± 10º ± 10º
Ground clearance 405 mm 16"
Transport dimensions
Length 12300 mm 40'4"
Width 2490 mm 8'2"
Height 3200 mm 10'6"
Weight, optional equipment excl. 15800 kg 34800 lb
25°
25°
A B 1 090 mm
2 560 mm
ROC F9CR
Main specifi cations
The ROC F9CR crawler drill rig is very powerful in its class, with true 127 mm tophammer capability, and is available with single boom for quarrying. Features the 25 kW COP 2550 rock drill with COPROD drill steel for fast penetration and perfect fl ushing, powered by a fuel-effi cient diesel engine.
Standard equipment
Air conditioner, Reduced impact pressure mechanism, Anti-jamming system, Automatic feed-force control, Fuel saving device, Two-speed traction motors, Dust collector and pre-separator, Double hydraulic drillpipe support, Rod-handling system, Feed extension, Heavy-duty tracks, Operator’s cabin, ECM, ROPS and FOPS approved, Air-fl ow control switch, Water mist system excl. tank, Toe-hole drilling kit, Inclination/depth instrument
Optional equipment
Hydraulic winch, Hydraulic support leg, Electric refuelling pump, Central lubrication system
Recommended hole range
CR76, CR89 90-127 mm 3½"-5"
Hole depth 28 m 92'
Hydraulic rock drill COP 2550CR
Impact power, max. 25 kW 33.5 HP
Atlas Copco screw compressor
Working pressure 12 bar 175 psi
FAD 210 l/s 450 cfm
Engine
Caterpillar Diesel Stage 3/Tier III CAT C9
Rating at 2000 rpm 224 kW 304 HP
Boom variants Single boom Fuel tank
Capacity 400 l 106 US gal.
FeedFeed length, total 8100 mm 26'7"
Travel length 4770 mm 15'8"
Feed extension 1300 mm 4'3"
Feed rate max. 0.92 m/s 180 ft/min
Feed force, max. 20 kN 4500 lbf
Tramming
Tramming speed, max. 3.6 km/h 2.2 mph
Traction force 112 kN 25200 lbf
Hill climbing ability, 20° without winch
Track oscillation ± 10º
Ground clearance 405 mm 16"
Transport dimensions
Weight, excl. options 17300 kg 38100 lb
Width 2490 mm 8'2"
Length 12300 mm 40'4"
Height 3200 mm 10'6"
Visit www.surfacedrilling.com for more information
25°
25°
A B 1 090 mm
2 560 mm
COPROD DRILL RIG SPECIFICATION
Drilling in open pit mining 113
Main specifi cations Main specifi cations
ROC L7CR
The ROC L7CR drill rig offers an economic alternative with an extraordinary performance in its hole range. Large scale work sites, and quarries with high demand on productivity, are in focus. The standard drill rig is designed to operate within the most demanding production environment. We also provide the short feed version for contract drilling.
Standard equipment
RHS 102 Rod magazine, Engine monitoring, Hole inclination and drill depth instrument, Dust collector and pre-separator, Automatic cleaning system, 12 hours fuel capacity, Fuel tank in steel, Hydraulic oil - Mineral, Manual hydraulic oil fi lling system, Stepless fl ushing regulation in cabin, Triple track chain grouser pads, Electrical outlet 12VDC, Feed lightening Optional equipment
Gas charging equipment, Extractor, Service winch on feed, Rock drill stroke length selection in cabin, Diesel driven cabin heater, Cab windows tinted, Cab windows laminated, Wind shield dryer for right window, Sun shade kit for cab, Electrical heated operators seat, Reversing camera, Radio/
CD, Canopy lighting, Safety rails on canopy, Beacon, ProCOM, Engine monitoring, Hole inclination and drill depth instrument with laser receiver, Compressor regulation heating kit, Hydraulic oil - Tropical/
Artic/Bio oil, Statoil Hydraway, Bio Pa 46, Diesel driven engine pre-heater, Ether start for engine, Fire suppression system Manual/
Automatic, Central lubrication system, Service lamp inside canopy, Water mist - Pre-plumed, Water mist - 225l pressurised tank, Water mist - 400l non pressurised tank
Recommended hole range
CR89, CR102, CR127, CR140 105 -180 mm 4"- 7"
Hole depth, max. 36 m 120'
Hydraulic rock drill COP 4050CR
Impact power, max. 40 kW 54 HP
Atlas Copco screw compressor
Working pressure 12 bar 171 psi
FAD 254 l/s 540 cfm
Engine
Caterpillar Diesel stage 3/Tier III CAT C13
Rating at 2000 rpm 328 kW 417 HP
Boom variants single boom Fuel tank
Capacity 760 l 201 US gal.
FeedFeed length, total 12200 mm 40'
Travel length 7500 mm 25'
Feed extension 1150 mm 59"
Feed rate max. 0.9 m/s 177 ft/min
Feed force, max. 40 kN 8992 lbf
Tramming
Tramming speed, max. 1.7/3.5 km/h 1.2/2.2 mph
Traction force 124/49 kN 27876/
11016 lbf
Hill climbing ability 20°
Track oscillation + 10º/-8
Ground clearance 405 mm 16"
Transport dimensions
Weight, excl. options 24600 kg 54230 lb
Width 2500 mm 8'2"
Length 12200 mm 40'
Height 3500 mm 11'6"
Visit www.surfacedrilling.com for more information
2440
Technical data Technical data