Recommended hole range D7C
T38, T45, T51 64-115 mm 2½"-4½"
Max hole depth, approx 28 m 92'
Recommended hole range D9C
T45, T51 76-115 mm 3" - 4½"
Hole depth 28 m approx. 92'
Hydraulic rock drill COP 1840-series (ROC D7C)
Impact power 18 kW 24.5 HP
COP 2160 (ROC D9C)
Impact power, max. 21 kW 28 HP
Atlas Copco C 106 screw type compressor ROC D7C
Working pressure, max 10.5 bar 152 psi
FAD 127 l/s 270 cfm
ROC D9C
Working pressure, max 10.5 bar 152 psi
FAD 136 l/s 288 cfm
Engine ROC D7C/D9C Caterpillar water-cooled diesel engine Stage 3/Tier III CAT C7
Rating at 2200 rpm 168 kW 225 HP
Boom variants -11, folding boom Fuel tank
Capacity 370 l 98 US gal.
Feed
Feed length, total 7135 mm 23'5"
Travel length 4240 mm 15'
Feed extension 1400 mm 4'3"
Feed rate max. 0.92 m/s 180 ft/min
Feed force, max. 20 kN 4400 lbf
Coverage area, approx 12 m² 130 sqft
Tramming
Tramming speed, max. 3.1 km/h 2.0 mph
Traction force 115 kN 25760 lbf
Hill climbing ability, 20° (30° with winch)
Track oscillation ± 12°
Ground clearance 455 mm 17½"
Transport dimensions Weight, excl. options
-11 Folding boom 13600 kg 30000 lb
Width 2370 mm 7'10"
Length 11610 mm 38'1"
Height 3200 mm 10'2"
The new ROC D7C/D9C crawler drill combines the power and fl exibility of the popular ROC D7 with the intelligence of RCS – computerized Rig Control System. RCS adjusts impact and feed to the rock conditions so as to achieve smoother drilling and less wear in the drill steel. Designed both for construction and quarrying work, the ROC D7C/
D9C has a true 102 mm tophammer capability. For bench heights up to 28 m. Fuel effi cient diesel engine delivers the power needed for quick penetration and effi cient fl ushing.
Standard equipment
Rig Control System RCS, Operator’s cabin (ROPS and FOPS approved), RHS mechanized rod handlling, Aluminium feed, Double drill-steel support, Angle and hole depth instrument, Fuel saving device, Two-speed traction motors, Dust collector and pre-separator, Feed extension, Air fl ow control switch, Anti-jamming system, Valves for reduced percussion and air pressures for collaring, Retractable dust hood, Heavy duty tracks, Work lights, Electric refuelling pump
Optional equipment
Automatic feed alignment, Laser plane receiver, Automatic rod adding system, Hydraulic winch, ROC Manager – MWD, Measure While Drilling, Toe-hole drilling kit, Hydraulic support leg, Silencing kit, Hole Navigation System
25°
25°
2755 5500 3100
4780
TOPHAMMER DRILL RIG SPECIFICATION
Drilling in open pit mining 91
Main specifications Recommended hole range
T45, T51 76 -115 mm 3"- 4½"
Hole depth, 25 m approx, 82'
Hydraulic rock drills Montabert/HC158
Impact power, max. 21 kW 28 HP
Compressor
Working pressure, max. 10 bar 140 psi
FAD 167 l/s 350 cfm
Engine
Cummins/QSC 8.3
Rating at 2200 rpm 194 kW 260 HP
Boom variant
Type Extendable
Fuel tank
Capacity 400 l 106 US gal.
Feed
Feed length, total 7660 mm 25'
Travel length 4250 mm 14'
Feed extension 1500 mm 4'11"
Feed rate max. 0.7 m/s 132 ft/min
Feed force, max. 19.6 kN 4400 lbf
Pull force max. 19.6 kN 4400 lbf
Tramming
Tramming speed, max. 3.4 km/h 2.1 mph Traction force, max 89.6 kN 20000 lbf Hill climbing ability 30º
Track oscillation ± 9º
Ground clearance 420 mm 16'5"
Transport dimensions
Weight, excl. o.e 13 tonnes 28660 lb
Width 2.47 m 8'2"
Length 9.98 m 32'9"
Height 2.87 m 9'5"
ECM 660
Visit www.surfacedrilling.com for more information This high performing crawler drill is equipped with
a 21 kW reverse percussion hydraulic drifter (HC158) and auto drilling system that offers the combination of high penetration rate, straight holes and long life for consumables. The extendable boom provides for easy and precise hole positioning, and the air conditioned cab for operator’s comfort. The ECM can be used for the hole range 76 -115 mm with T45 or T51 rod in both quarry and construction applications.
Standard equipment
50 hour element kit, 90 deg. Indexed drill guide, ARC T51 X 12’ X 6 for 72 mm coupling, Auto drilling system (montabert), Auto rod thread greaser, Back mirror, Back up alarm, Drifter hour meter, Dust collector with vertical sliding hood, Engine auto throttle, Full length track guard, HC158 reverse percussion hydraulic drifter, JIC hose fittings, Low level indicator for fuel & hyd. oil, One lever ARC control, Safety shutdown device on drill guide, Standard tool set, Three sets manuals and parts books, Triple grouser shoe pads, Two lever drilling controls, Two speed traction motor, Warning horn, Working lights (F:3/R:1), Limited ambient temperature: 52 deg. C.
Selection of Optional equipment
Accumulator charge kit, Angle indicator 2-d Lim, Angle indicator 3-d lim, Anti freezing system, Arc lockout system, Arc T45 X 12’ X 6 for 63 mm coupling, Arc T45 X 12’ X 6 For 66 mm coupling, Cold wether kit, Extra parts book, Hyd. pressure test kit, Pre skimmer, Single grouser shoe pads, T51 / 77 mm centralizer, Vaposol (less tank), Vaposol tank (asme)
Main specifi cations
ROC F7
The ROC F7 is available in two versions: a single boom version ideal for quarries; and a folding boom model versatile enough for all manner of construction sites.
The ROC F7 is equipped with a double drill steel support and an ergonomically designed cabin.
Standard equipment
Reduced impact pressure mechanism, Anti-jamming system, Automatic feed-force control (RPC), Fuel saving device, Two-speed traction, Dust collector and pre-separator, Double hydraulic drill steel support, Rod handling system (7+1 rods), Feed extension, Heavy duty tracks, Operator’s cabin, ROPS and FOPS approved, Air fl ow control switch
Optional equipment
Hydraulic winch, Hydraulic support leg, Electric refuelling pump, Anti-freeze equipment for compressed air, Air con-ditioner, heater, Electronic hole depth and inclination in-strument, Central lubrication system, Water mist system, TAC tube guides for precision drilling, Thread greasing device
Recommended hole range
T45, T51 76-115 mm 3" - 4½"
Hole depth 28 m approx. 92'
Hydraulic rock drill COP 2160
Impact power 21 kW 28.1 HP
Atlas Copco XAH2 screw compressor
Working pressure 10.5 bar 152 psi
FAD 148 l/s 308 cfm
Engine
Caterpillar Diesel CAT 3126B
Rating at 2000 rpm 186 kW 253 HP
Boom variants -10, single boom -11, folding boom Fuel tank
Capacity 400 l 100 US gal.
Feed
Feed length, total 8100 mm 26'7"
Travel length 4770 mm 15'8"
Feed rate max. 0.92 m/s 180 ft/min
Feed force, max. 20 kN 4500 lbf
Tramming
Travel speed, max. 3.6 km/h 2.2 mph
Traction force 112 kN 25200 lbf
Hill climbing ability, without winch 20° 20º Hill climbing ability, with winch 35º 35º
Track oscillation ± 10º ± 10º
Ground clearance 405 mm 16"
Transport dimensions
Length folding boom version 13000 mm 42'8"
Length single boom version 12300 mm 40'4"
Width 2490 mm 8'2"
Height folding boom version 3200 mm 10'6"
Height single boom version 3200 mm 10'6"
Weight, optional equipment excluded
folding boom version 15700 kg 34600 lb single boom version 15100 kg 33300 lb
25°
25°
2440 4815 2610
3490
TOPHAMMER DRILL RIG SPECIFICATION
Drilling in open pit mining 93
Main specifi cations
ROC F9/F9LF
The ROC F9 crawler drill rig is very powerful in its class, with true 127 mm tophammer capability, and is available with single or folding boom for quarrying and construction.
Features the 25 kW COP 2560 rock drill with T51 drill steel for fast penetration and perfect fl ushing, powered by a fuel-effi cient diesel engine.
Standard equipment
Air conditioner, Reduced impact pressure mechanism, Anti-jamming system, Automatic feed-force control, Fuel saving device, Two-speed traction motors, Dust collector and pre-separator, Double hydraulic drillsteel support, Rod-handling system, Feed extension, Heavy-duty tracks, Operator’s cabin, ECM, ROPS and FOPS approved, Air-fl ow control switch, Water mist system excl. tank, Toe-hole drilling kit, Inclination/depth instrument Optional equipment
Hydraulic winch, Hydraulic support leg, Electric refuelling pump, Central lubrication system, TAC tube guides for precision drilling, Thread-greasing device, Rock drill extractor, Heater for cabin
Recommended hole range
T51 89-127 mm 3½"-5"
Hole depth 30 m 98'
Hydraulic rock drill COP 2560
Impact power, max. 25 kW 33.5 HP
Atlas Copco screw compressor
Working pressure 12 bar 175 psi
FAD 213 l/s 450 cfm
Engine
Caterpillar Diesel Stage 3/Tier III CAT C9
Rating at 2000 rpm 224 kW 304 HP
Boom variants -10, single boom -11, folding boom Fuel tank
Capacity 400 l 106 US gal.
Feed
Feed length, total
-10 and -11 8100 mm 26'7"
-LF 11230 mm 36'10"
Travel length
-10 and -11 4770 mm 15'8"
-LF 7830 mm 25'8"
Feed extension 1300 mm 4'3"
Feed rate max. 0.92 m/s 180 ft/min
Feed force, max. 20 kN 4500 lbf
Tramming
Tramming speed, max. 3.6 km/h 2.2 mph
Traction force 112 kN 25200 lbf
Hill climbing ability, 20° without winch
Track oscillation ± 10º
Ground clearance 405 mm 16"
Transport dimensions Weight, excl. options
ROC F9-10 approx. 15600 kg 34000 lb ROC F9-11 approx. 16200 kg 37500 lb
ROC F9LF 16600 kg 36600 lb
Width 2490 mm 8'2"
Length
-10 and -11 12300 mm 40'4"
-LF 11300 mm 37'
Height 3200 mm 10'6"
ROC F9LF – For selective mining and single pass drilling Maximize drill time. Minimize inproductive rod changing time.
The ROC F9 features a drill feed system for 6.1 m (20 foot) drill rods, with a maximum hole depth of 36 m (118 feet).
25°
25°
2440 4815 2610
3490
Main specifi cations