Open an elevated command prompt and run the SFTMIME DELETE APP command D Open an elevated command prompt and run the SFTMIME CLEAR APP command.

Configuring Subnet Prioritization

C. Open an elevated command prompt and run the SFTMIME DELETE APP command D Open an elevated command prompt and run the SFTMIME CLEAR APP command.

E. Open an elevated command prompt and run the SFTMIME LOCK APP command. Correct Answer: A

Section: (none) Explanation

Explanation/Reference:

How to Reset the FileSystem Cache

Resetting the FileSystem cache is not something that should usually be necessary. However if you need to completely reset the FileSystem cache, perhaps for troubleshooting purposes, you can use the following procedure. Administrative rights are required to perform this action.

To reset the FileSystem cache

1. Set the following registry value to 0 (zero):

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SoftGrid\4.5\Client\AppFS\State 2. Restart the computer.

http://technet.microsoft.com/en-us/library/cc843790.aspx

QUESTION 92

Your company hosts all virtual applications through Microsoft Application Virtualization (App-V) 4.6 on servers that run Windows Server 2008 R2. You will use Microsoft System Center Configuration Manager (ConfigMgr) 2007 R3 to deploy all virtual applications to client computers via the App-V client.

The company has the following deployment requirements:

All client computers must be enabled for virtual application packages in ConfigMgr.

AII client computers must be configured to check for new application packages that are scoped to Active Directory Domain Services (AD DS) security groups.

The new program notification icon must be enabled to open the Run Advertised Programs window. You need to enable the client computers for software distribution.

Which settings should you select in the ConfigMgr Advertised Programs Client Agent Properties dialog box? To answer, select the appropriate check box or check boxes in the dialog box.

Correct Answer:

Section: (none) Explanation

Explanation/Reference:

http://technet.microsoft.com/en-us/library/bb632371.aspx http://technet.microsoft.com/en-us/library/cc180879.aspx http://technet.microsoft.com/en-us/library/cc161869.aspx QUESTION 93

Your company has a server that runs Windows Server 2008 R2 with the Remote Desktop Session Host (RD Session Host) role service. All client computers run 64-bit Windows 7.

You need to terminate active sessions for Remote Desktop client connections after one hour. You must not impact any other session states.

Which RD Session Host settings should you use? To answer, select the appropriate settings in the answer area.

Hot Area:

Section: (none) Explanation

Explanation/Reference:

Active sesstion limit + End session QUESTION 94

Your company is deploying an application by using Microsoft Application Virtualization (App-V) 4.6. App-V 4.6 SP1 is not installed.

Company policy states that the application must meet the following requirements: Services must not be virtualized.

The Windows Installer must be disabled. Filenames must contain build numbers.

Operating system activities must be virtualized.

You need to deploy the application according to company policy.

Which settings should you choose? To answer, select the appropriate setting or settings in the answer area. Hot Area:

Section: (none) Explanation

Explanation/Reference:

Allow Use of MSI Installer checkbox: Specifies, when checked, the MSI Server service in the Windows operating system has been enabled to permit correct interaction of the SoftGrid Sequencer and the application installer (default is checked).

Allow Virtualization of Events checkbox: Specifies, when checked, that certain low-level operating system activities of the application, such as the ever popular semaphores, will be virtualized when the application is run on SoftGrid Clients (default is checked – do not deselect without consulting Microsoft Technical Support). Allow Virtualization of Services: Specifies, when checked, that any embedded services that an application uses will be virtualized. (default is checked).

Append Package Version to Filename: When selected the upgraded version indicator will automatically be appended to the name of the .SFT file during a save operation. This option applies to a Package Upgrade and is useful in the Active Upgrade scenarios.

http://blogs.technet.com/b/appv/archive/2007/08/21/inside-the-sequencer-part-1.aspx

QUESTION 95

AII client computers on your network run Windows 7 Enterprise.

You are deploying Windows XP Mode images on the Windows 7 computers.

You need to copy data to a folder within a Windows XP Mode image without starting the virtual machine (VM).

Which tool should you use first? A. diskpart.exe B. Device Manager C. fdisk.exe D. Disk Cleanup Correct Answer: A Section: (none) Explanation Explanation/Reference:

DiskPart.exe and managing Virtual Hard Disks (VHDs) in Windows 7

In Windows 7, new commands have been added in DiskPart to allow for the creation and management of Virtual Hard Disks (.vhd files). The DiskPart VHD management commands have been provided below in 2 sections – commonly used commands with examples and other commands. It is assumed in each of the examples that DiskPart.exe has already been launched in an elevated command prompt.

Creating a VHD

The example below creates a 20GB dynamically expanding VHD called "test.vhd" and places it in the root of the C: drive. Note that the type parameter is optional and the default type is fixed.

create vdisk file=c:\test.vhd maximum=20000 type=expandable Attaching a VHD

The following example shows how to select and attach the VHD. It also provides steps for partitioning, formatting and assigning a drive letter to the attached VHD.

select vdisk file=c:\test.vhd attach vdisk

create partition primary

assign letter=v Detaching the VHD

To detach (i.e. unmount) the VHD, use the following example: select vdisk file=c:\test.vhd

detach vdisk

Note: All 3 of these VHD actions can also be performed in the Disk Management Console of Windows 7.

http://blogs.msdn.com/b/7/archive/2009/10/08/diskpart-exe-and-managing-virtual-hard-disks-vhds-in-windows- 7.aspx

QUESTION 96

All Client computers in your company run Windows 7 Enterprise.

Users run Windows XP Mode guest virtual machines (VMs) on their computers. Each client computer runs two guest VMs.

Each guest VM requires network connectivity to the other guest VM on the host computer, but most not have network connecticity to the host computer operating system or to the internet You need to configure each guest VM to meet the requirements.

What should you do?

A. Set each VM network adapter to Not connected.

B. Configure each VM to use one Internal Network network adapter.

C. Configure each VM to use one Shared Networking (NAT) network adapter.

D. Disable Integration Features for each VM. Configure Windows Firewall to allow incoming ICMP traffic, and remove all other Windows Firewall exceptions

Correct Answer: B Section: (none) Explanation

Explanation/Reference: Explanation:

- Shared Networking (NAT) refers to a virtual NAT (Network Address Translation) which allows the VM to leverage the external TCP/IP network connected to the host. This is very useful if you regularly move the host computer between different network configurations. NAT is the preferred networking option when there is a shortage of IP addresses, a need to ensure the VM's IP address is not targetable from an external network, or a need for connecting using WWAN.

- In contrast, Bridge mode uses the network adapter on the host. This option appears in the drop down menu as the name of the adapter. The VM is connected directly to the selected network connection of the Windows 7 host, and will behave like a separate physical computer on the same network. If the host has a wireless

adapter, its name will appear in the dropdown list. In Bridge mode, Virtual Machine Network Services driver helps redirect the incoming network traffic to the correct VM and associate the correct MAC address in all outbound network traffic. In scenarios using VPN, Bridge mode is the preferred option.

- Choosing the option `Not connected' disables the VM's networking ability and completely isolates it from the network.

- `Internal Network' option enables networking among only the VMs on the single Windows 7 host.

http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-windows-xp- mode.aspx

QUESTION 97

You are deploying Microsoft Enterprise Desktop Virtualization (MED-V) virtual machines (VMs) on several client computers.

You need to ensure that names of the new VMs follow a naming convention. What should you do?

A. In the MED-V Management console, configure the Image Update Settings.

B. In the MED-V Management console, add a script action and set the VM computer name pattern. C. In the VM, configure the Identification String option by using the Setup Manager Wizard.

D. In the VM, run the System Preparation Tool (Sysprep) and choose to start the factory session after rebooting. Correct Answer: B Section: (none) Explanation Explanation/Reference: Explanation: http://technet.microsoft.com/en-us/library/ff433616.aspx QUESTION 98

Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements.

You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available to all client computers.

What should you do?

A. Install and configure IIS on a member server. B. Configure a shared folder on a member server. C. Create a visible workspace for client computers.

D. Install and configure Microsoft SQL Server on a member server. Correct Answer: A

Section: (none) Explanation

Explanation/Reference:

Explanation:

An image repository is an optional server that is used for image distribution (where administrators upload new images and client computers check the server every 15 minutes and update their image if a new one is available).

An image distribution server requires the following: Internet Information Services (IIS)

During the IIS installation, when adding role services, select the following supported authentication methods: When configuring IIS, include the following:

- .ckm (application/octet-stream) - .index (application/octet-stream)

QUESTION 99

Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V).

You update the MED-V Workspace virtual machines (VMs) several times and notice that the server is running out of disk space.

You need to configure the Workspace to minimize the disk space requirements. What should you do?

A. Configure the Workspace as revertible. B. Set an expiration date for the Workspace. C. Specify the number of image versions to keep.

D. Specify that clients should use the Trim Transfer when downloading the images. Correct Answer: D

Section: (none) Explanation

Explanation/Reference: Explanation:

<img src="70-669-5_2.jpg" width="600" height="247"> http://technet.microsoft.com/en-us/library/ff433598.aspx QUESTION 100

Your organization has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7.

You need to create a single distribution file containing Windows Virtual PC and a virtual machine image that will be deployed to all the client computers.

What should you use?

A. Microsoft Deployment Toolkit (MDT) 2010

B. Deployment Images Servicing and Management (DISM)

C. Microsoft Enterprise Desktop Virtualization (MED-V) Packaging Wizard

D. Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 with a template Correct Answer: C Section: (none) Explanation Explanation/Reference: Explanation: QUESTION 101

You are preparing to update a MED-V Workspace that is used by 1000 client computers. You need to minimize the network impact of updating the workspace.

What are the two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A. Pack the Workspace images.

B. Enable Trim Transfer on the Workspace.

C. Send each virtual machine file storage folder to a compressed (zipped) folder. D. On each virtual machine file in the Workspace, enable file system compression. Correct Answer: AB Section: (none) Explanation Explanation/Reference: Explanation: http://technet.microsoft.com/en-us/library/ff433545.aspx QUESTION 102

All client computers in your company run Windows 7 Enterprise.

You are planning to deploy a custom application that runs only on Windows XP to all users.

You install Windows XP Mode on each host computers and install the application in the Windows XP guest virtual machines (VMs). You verify that the application runs in the guest VMs.

An application shortcut does not appear on the Windows 7 host computers.

You need to ensure that the applications can be launched directly from Windows 7 host computers. What should you do in the guest VMs?

A. Repair the application.

B. Upgrade the Virtual PC Integration Components.

C. Copy the application shortcut to the Start menu to All Users.

D. Assign the Full Control permission to the application shortcut to the everyone group. Correct Answer: C Section: (none) Explanation Explanation/Reference: Explanation: http://blogs.technet.com/b/windows_vpc/archive/2009/11/02/publishing-virtual-applications-in- windows- virtualpc.aspx QUESTION 103

Your organization has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7.

You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V hosts. Your environment includes Microsoft Enterprise Desktop Virtualizaetion (MED-V).

You plan to deploy a virtual machine (VM) image to all client computers.

What should you do?

A. Use VMM to configure placement settings. B. Configure MED-V revertible workspace policy. C. Configure MED-V persistent workspace policy. D. Use Hyper-V Manager to create a revert snapshot. Correct Answer: C

Section: (none) Explanation

Explanation/Reference: Explanation:

The following MED-V workspace types are available:

Persistent--In a persistent MED-V workspace, all changes and additions the user makes to the MED-V

workspace are saved in the MED-V workspace between sessions. Additionally, a persistent MED-V workspace is generally used in a domain environment. Revertible--In a revertible MED-V workspace, at the completion of each session (that is, when the MED-V workspace is stopped), the MED-V workspace reverts to its original state during deployment. No changes or additions that the user made are saved on the MED-V workspace between sessions. A revertible MED-V workspace cannot be used in a domain environment. http:// technet.microsoft.com/en-us/library/ff433566.aspx

QUESTION 104

"A Composite Solution With Just One Click" - Certification Guaranteed 7 Microsoft 70-669 Exam What should you do?

A. Copy the Configuration Server folder to a network share. B. Add the Failover Clustering feature to the MED-V server.

C. Add the Network Load Balancing (NLB) feature to the MED-V server. D. Migrate the MED-V server to a highly available virtual machine (HAVM). Correct Answer: A

Section: (none) Explanation

Explanation/Reference: Explanation:

To configure the MED-V server in cluster mode 1. Install and configure MED-V on one of the servers.

2. Create a shared network in a central location where all of the servers can access it.

3. Copy the contents of the <InstallDir>/Servers/ConfigurationServer folder to the shared network. 4. Install MED-V server on all designated servers.

5. On the shared network, assign full access to all MED-V server system accounts. 6. On each server, do the following:

a. In the <InstallDir>/Servers/ServerConfiguration.xml file, set the value of <StorePath> to the shared network path.

b. Copy the <InstsallDir>/Servers/KeyPair.xml file from the original server to all MED-V servers. c. Restart the MED-V service.

http://technet.microsoft.com/en-us/library/ff433584.aspx QUESTION 105

2008 R2. All client computers run Windows 7.

Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V). You use MED-V to support temporary test environments.

You need to ensure that the disk space used by obsolete Workspaces is automatically minimized. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two)

A. Configure the Workspace as revertible. B. Set an expiration date for the Workspace. C. Specify the number of image versions to keep. D. Configure automatic deletion of the Workspace Correct Answer: BD

Section: (none) Explanation

Explanation/Reference: Explanation:

Workspace Expiration Options

Using the MED-V Management Console, Workspace expiration options are set in the General section of the deployment tab.

Expiration options can be set on a per-user or per-group basis. When the workspace expiration date is set, it takes effect for the workspace during the next policy refresh (which is on login, every 15 minutes, or manually through the system tray). If a workspace is active, and the workspace expiration occurs, it will not affect an active workspace session. But once the workspace stops in that case, the workspace will no longer be made available to the user.

Workspace Deletion Options

An additional option is made available for determining the behavior of workspace images on the client under certain configuration parameters. These include when the workspace is expired, when the workspace is offline for a certain amount of time, or the workspace has been disabled. These options were primarily designed for revertible workspaces in that deletion of persistent workspaces are often only used for added security of normally connected workspaces. If a parameter triggering workspace deletion has occurred and the workspace is currently running, the deletion will take place once the workspace is stopped. It is important to note only the images (all versions) beneath C:

\MED-V Images\<IMAGENAME> will be deleted and not pre-staged CKM images. The Behavior

Note that it is important that you understand the behavior from a user's standpoint. If the user is attempting to start a MED-V Workspace, he may receive a message stating that there are no workspaces available, or he may see a list of workspaces but the one the user is looking for is not available. This usually means one of the following:

The workspace has not been enabled for the user The workspace is enabled but has expired

Users will receive no warning prior to expiration. In addition, users will not receive any notice once the workspace has expired.

Tip by J.C. Hornbeck, a System Center Knowledge Engineer at Microsoft. Among other duties, J.C. Hornbeck manages a variety of TechNet blogs, including The Microsoft Enterprise Desktop Virtualization (MED-V) Blog. Check it out for more information on Microsoft Application Virtualization. http://technet.microsoft.com/en-us/ magazine/gg277503.aspx

QUESTION 106

Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You manage client computers by

using Microsoft System Center Configuration Manager 2007 R2.

requirements.

You need to ensure that administrators can centrally store MED-V logging information and generate reports.

In document Microsoft.Test-inside v by.ROD.239q (Page 92-148)