• Edit an effect plug-in (Inserts mode)
• Change or insert an effect plug-in (Inserts Configuration mode)
Note: This knobset only relates to insert effects, and not to instrument plug-ins. Editing Effect Plug-ins
You edit effect plug-ins in Inserts mode, using the Inserts knobset.
To edit an effect plug-in
1 Press the Inserts knob top, or key, to display all effect plug-ins inserted in the currently selected channel strip. This key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The effect plug-in names are displayed on the Soft Keys, the touchscreen, or the display, depending on the system you are using.
If more than eight effect plug-ins are inserted, you can use the Page keys to display ensuing plug-ins.
2 Press the knob top that features the name of the effect plug-in you want to edit. The parameters are displayed in the order shown in the Controls view of the effect. 3 Turn the respective knob to change the value.
Depending on the system you are using, for parameters with only two values, you can either press the On key, or turn the respective knob, to switch between the two values. The On key is lit when the value is 1 (or on) and unlit when the value is 0 (or off ). Pressing a knob top sets the controlled parameter to its default value.
If there are more than eight parameters, use the Page keys to navigate between them. 4 Press the Back key to return to the top-level knobset.
Changing or Inserting Effect Plug-ins
You change or insert effect plug-ins in Inserts Configuration mode, using the Inserts Configuration knobset.
To change or insert an effect plug-in
1 Press the Inserts knob top or key. The key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2 Press both Page keys simultaneously to display the Inserts Configuration knobset. The first eight Insert slots of the selected channel strip are displayed.
If an Insert slot already contains an effect plug-in, the On key is lit (on the MC Professional and MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the knob image.
3 Select the Insert slot you want by pressing the respective knob top. Press the Page keys to display Insert slots 9 to 15.
The Logic Pro Effect Plug-in menu appears. Press the Page keys to display ensuing plug-ins and to move through the effect plug-in hierarchy.
4 Choose the effect plug-in you want:
• Pressing the knob top enters a submenu or inserts a selected effect plug-in. • Pressing the Back key navigates up one level in the menu hierarchy.
Euphonix: Using the Input (Configuration) Knobset
This knobset behaves differently, depending on the channel strip type you are working with—audio or software instrument.
Onaudio channel strips, this knobset allows you to: • Set a channel strip’s input value (Input mode)
• Set a channel strip’s input format (Input Configuration mode) Oninstrument channel strips, this knobset allows you to: • Edit an instrument plug-in (Input mode)
• Change or insert an instrument plug-in (Input Configuration mode) Setting an Audio Channel Strip’s Input Value
You set an audio channel strip’s input value in Input mode, using the Input knobset.
To set a channel strip’s input value
1 Press the Input knob top, or key, to display all possible channel input values for the selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The input values are displayed on the Soft Keys, the touchscreen, or the display, depending on the system you are using.
You can use the Page keys to display ensuing input values.
2 Press the knob top that features the name of the channel input value you want to set. The currently active input value is indicated by a lit On key (on the MC Professional and MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the knob image.
Setting an Audio Channel Strip’s Input Format
You set an audio channel strip’s input format in Input Configuration mode, using the Input Configuration knobset.
To set a channel strip’s input format
1 Press the Input knob top or key.
Note: If using the MC Mix, press the CHAN key to enter Channel mode. 2 Press both Page keys simultaneously to switch to Input Configuration mode.
The selected channel strip’s input format values—Mono, Stereo, Left, Right, Surround—are displayed.
The currently active format value is indicated by a lit On key (on the MC Professional and MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the knob image.
3 Press the respective knob top to choose the input format you want. Editing Instrument Plug-ins
You edit instrument plug-ins in Input mode, using the Input knobset.
To edit an instrument plug-in
1 Press the Input knob top, or key, to display the software instrument plug-in inserted in the currently selected channel strip.
The instrument plug-in name is displayed on the Soft Keys, the touchscreen, or the display, depending on the system you are using.
2 Press the knob top to display the instrument plug-in parameters in the order shown in the Controls view of the instrument.
3 Turn the respective knob to change the value.
Depending on the system you are using, for parameters with only two values, you can either press the On key, or turn the respective knob, to switch between the two values. The On key is lit when the value is 1 (or on) and unlit when the value is 0 (or off ). Pressing a knob top sets the controlled parameter to its default value.
If the instrument plug-in features more than eight parameters, use the Page keys to navigate between pages of parameters.
4 Press the Back key to return to the top-level knobset. Changing or Inserting Instrument Plug-ins
You change or insert instrument plug-ins in Input Configuration mode, using the Input Configuration knobset.
To change or insert an instrument
2 Press both Page keys simultaneously to switch to Input Configuration mode.
The Logic Pro Instruments Plug-in menu appears. Press the Page keys to display ensuing plug-ins.
If an instrument plug-in is already inserted, the On key is lit (on the MC Professional and MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the knob image.
3 Choose the instrument you want:
• Pressing the knob top activates a submenu or inserts a selected instrument plug-in. • Pressing the Back key navigates up one level in the menu hierarchy.