Pressing the TRACK button selects Channel view, and assigns the channel strip controls to edit channel strip parameters.
• Press the TRACK button once to edit a single parameter in multiple channel strips, and to activate Mixer view.
• Press the TRACK button again to edit multiple parameters for a single channel strip, and switch to Channel view.
Mixer View
Mixer view allows you to edit a single parameter in multiple channel strips: volume, pan, input format, input assignment, output assignment, or automation mode. When you switch to Mixer view, the parameter being edited is briefly displayed on the right side of the main LCD. The mode display shows “tr” (for track), and the upper row of the LCD shows track names.
Press NAME/VALUE to display parameter values on the lower row of the LCD. These are shown when you turn a V-Pot, or press its button.
You can manipulate the following controls for editing in Mixer view. • Turning the V-Pots changes the associated channel strip parameter. • Pressing the button on a V-Pot sets the parameter to its default value.
• The Cursor Left/Cursor Right buttons switch to the next or previous channel strip parameter. The selected parameter is displayed briefly in the upper row of the LCD.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons. Channel View
Channel view allows you to edit the most important channel strip parameters for a single channel strip: volume, pan, instrument, Insert slot 1 assignment, Insert slot 2 assignment, Send 1 level, Send 2 level, and Send 3 level. When you switch to Channel view, the mode display shows “tr.”, and the upper row of the LCD shows the name of the channel strip. Press NAME/VALUE to show parameter names in the upper row, and parameter values in the lower row.
The following table lists what each V-Pot edits in Channel view mode: Action
Control
Edits volume. The current value is shown in the lower row of the LCD.
V-Pot 1
Edits pan. The current value appears in the lower row of the LCD. V-Pot 2
For software instrument tracks, turn to choose the instrument. Press the V-Pot 3 button to confirm your choice, insert the instrument, and open the plug-in window.
Action Control
For audio and software instrument tracks, turn to choose the plug-in used on Insert slot 1. Press the V-Pot 4 button to confirm your choice, insert the effect, and open the plug-in window. V-Pot 4
For audio and software instrument tracks, turn to choose the plug-in used on Insert slot 2. Press the V-Pot 4 button to confirm your choice, insert the effect, and open the plug-in window. V-Pot 5
Edits the send level of Send 1. V-Pot 6
Edits the send level of Send 2. V-Pot 7
Edits the send level of Send 3. V-Pot 8
Holding down SHIFT while pressing one of the MUTE or V-Pot buttons switches between mute and bypass.
Action Control
Mutes (or unmutes) the channel strip. V-Pot 1 or Mute 1
Mutes (or unmutes) the channel strip. V-Pot 2 or Mute 2
For software instrument tracks, mutes (or unmutes) the software instrument used on the channel strip.
V-Pot 3 or Mute 3
For audio and software instrument tracks, bypasses the effect plug-in used in Insert slot 1.
V-Pot 4 or Mute 4
For audio and software instrument tracks, bypasses the effect plug-in used in Insert slot 2.
V-Pot 5 or Mute 5
Mutes (or unmutes) Send 1. V-Pot 6 or Mute 6
Mutes (or unmutes) Send 2. V-Pot 7 or Mute 7
Mutes (or unmutes) Send 3. V-Pot 8 or Mute 8
Track Shortcut Menu
Hold the TRACK button to display the Track shortcut menu on the LCD. When this menu is active, the mode display shows “t_ “ (for Track shortcuts). Press one of the V-Pot or Function buttons to make the following changes.
Action Control
Switches to Mixer view, and selects volume as the parameter edited by the V-Pot.
V-Pot 1 or F1
Switches to Mixer view, and selects pan as the parameter edited by the V-Pot.
V-Pot 2 or F2
Switches to Mixer view, and selects input format as the parameter edited by the V-Pot.
V-Pot 3 or F3
Switches to Mixer view, and selects the input assignment as the parameter edited by the V-Pot.
Action Control
Switches to Mixer view, and selects the output assignment as the parameter edited by the V-Pot.
V-Pot 5 or F5
Switches to Mixer view, and selects the automation mode as the parameter edited by the V-Pot.
V-Pot 6 or F6
Switches to Mixer view, switches Logic Pro to Arrange view, and selects the automation parameter selected in the Arrange window. V-Pot 7 or F7
Switches to Channel Strip Setup view. V-Pot 8 or F8
Channel Strip Setup View
Hold the TRACK button to display the Track shortcut menu on the LCD, and press V-Pot 8 or press F8 to enter Channel Strip Setup view. In this mode, you can edit the following (less frequently used) parameters for the selected channel strip.
Action Control
Edits the channel strip format (mono, stereo, left, right, surround). V-Pot 1
Edits the Spread parameter. V-Pot 2
Selects the channel strip input assignment. Confirm by pressing V-Pot 6.
V-Pot 3
Selects the channel strip output assignment. Confirm by pressing V-Pot 7.
V-Pot 4
Edits the automation mode. V-Pot 5
Edits group membership. You can only choose one group or Off. To make a channel strip a member of multiple groups, use Group Edit mode.
V-Pot 6