Run the installation program.
The setup executable is located in the Disk1 directory of the extracted files.
(Microsoft Windows ) Run setup.cmd (UNIX ) Run setup.sh
In the lower right corner of the Welcome panel, click Next.
Review the license agreement, click I agree to the terms of license agreement, and then click Next. Accept the default destination directory or browse to select a different directory, and then click Next. In the Host Name Information panel, verify that the hostname presented is the Fully Qualified Domain Name (FQDN) for the host, and then click Next.
Correct the value as needed.
In the BMC Atrium SSO Server Cluster Options panel, perform the following actions:
Home BMC Software Confidential
a.
b.
c.
7.
Select Clustered BMC Atrium SSO Server. Select New Cluster Installation (First node). Click Next.
Enter a file name and location for storing the cluster configuration information and click Next. The file can have any extension but it is recommended that you use .cfg as the extension because the file is storing cluster configuration information.
For example, clusterconfig.cfg. When you enter the file name and click Next, a config file with that name is automatically created on your computer.
Important
This file is needed when subsequent nodes are added to the cluster and it contains sensitive information that is used when installing subsequent nodes.
9.
Enter the load balancer URL and click Next. For example:
https://loadBalancerFQDN:port/atriumsso
https://BMCLoadBalancer.bmc.com:8443/atriumsso
As you are installing BMC Atrium SSO in a cluster environment, you must use the load balancer URL mentioned in this step for integration with other products. For example, when you are integrating BMC Atrium SSO with BMC Remedy Mid Tier, you must add the load balancer URL instead of the BMC Atrium SSO server URL. For more information, see Running the
. SSOMidtierIntegration utility on the Mid Tier (see page 92)
Verify that Install New Tomcat is selected and click Next.
Note
The BMC Atrium Single Sign-On Tomcat server cannot be shared with any product that integrates with BMC Atrium Single Sign-On. BMC recommends that BMC Atrium Single Sign-On be the only application on the Tomcat server.
Accept the default Tomcat server HTTP port number (8080), HTTPS port number (8443), and Shutdown port number (8005), or enter different port numbers, and click Next.
If any of the port numbers are incorrect, a pop-up menu identifies the incorrect port number and allows you to modify the selection.
Enter a cookie domain and click Next.
The domain value of the cookie should be the network domain of BMC Atrium Single Sign-On or one of its parent domains.
Important
The higher the level of the selected parent domain, the higher the risk of user impersonation.
You cannot use sibling domains or cross-domains with BMC Atrium Single Sign-On. For example, installing the BMC Atrium Single Sign-On server in the remedy.com domain and the AR System server in the bmc.com domain is not supported. You must move all your computers into the same domain.
Enter a strong administrator password, confirm the password, and click Next. The default administrator name is amadmin.
14.
15.
a.
b.
c.
d.
Review the installation summary and click Install.
After the first node has been successfully installed, additional nodes can be added to the cluster by using the file created during the first installation.
Verify that your BMC Atrium Single Sign-On installation was successful by accessing the BMC Atrium Single Sign-On URL.
Navigate to Start > All Programs > BMC Software > BMC Atrium SSO > Administrator to launch the BMC Atrium SSO Admin Console .
The URL to open the BMC Atrium SSO Admin Console is:
https://<ssoServer>.<domain>:<port>/atriumsso For example:
https://ssoServer.bmc.com:8443/atriumsso
When you are prompted that you are connecting to an untrusted connection, add the exception and then continue.
Note
The browsers display this warning because you have not yet configured the SSO authentication as a trusted provider.
Confirm that you can view the BMC Atrium Single Sign-On login panel.
Log on with the SSO administrator name (for example, amadmin) and password.
The BMC Atrium SSO Admin Console appears.
(Click the image to expand it.)
Home BMC Software Confidential
d.
16.
17.
Verify that your BMC Atrium Single Sign-On installation was successful by accessing the SSO load balancer.
For example:
https://ssoloadbalancer.bmc.com:8443/atriumsso}
The BMC Atrium SSO login screen appears. After you log on, the SSO server appears in the HA Nodes List.
(Optional) Create an administrative user account for BMC Products to perform search functions on the user store (for example, to list user names and emails).
If you are using the BMC Atrium Single Sign-On server's internal LDAP, assign the BMCSearchAdmins group to the new user account.
If you are using an external system for authentication (such as AR System, LDAP, or Active Directory), assign the BmcSearchAdmins group to either an already existing user account or a new user
account.
Where to go from here
Installing additional nodes for an HA cluster on a new Tomcat server (see page 63)or Installing additional nodes for an HA cluster on an external Tomcat server (see page 70)
6.5.6 Installing additional nodes for an HA cluster on a new Tomcat server
The following provides information and instructions for installing additional nodes for an HA cluster on a new Tomcat.
Before you begin (see page 63)