Menu Call Lists

All incoming and outgoing calls will be stored in a call list.

1. In the initial condition, press the key or . 2. With the Arrow keys, select the menu Call Lists.

3. Press the key . The following is displayed:

Calls (combined)...

Calls (inbound)...

Calls (outbound)...

Active Recalls...

< Call Lists

Figure 60: Menu Call Lists

It is possible to dial the call number again directly via the calls (combined), calls (inbound) and calls (outbound) menus. Refer to chapter 3.3.4, "Redialling", beginning on page 86 and chapter 3.5.2, "Call List (inbound)", beginning on page 104 for the procedure.

3.5.1 Calls (combined)

This function shows a combined call list with incoming and outgoing calls.

1. In the initial condition, press the key or . The display appears in Figure 58.

2. With the Arrow keys, select the menu Call Lists.

3. Press the key . The display appears in Figure 60.

4. Press the key .

The following is displayed if entries are available:

>01 23.01.10 11:20

Figure 61: Menu Calls combined

The combined call list contains the following information:

• Type of call (incoming/outgoing).

Incoming calls are indicated with ">" and outgoing calls with "<".

• Consecutive numbering of the entries, beginning with 01 for the last entry.

• Date and time of the calls.

• Success (connected/not connected).

The symbol on the display indicates that there has been a call.

• The symbol on the display indicates that there has been a redirected call.

• The symbol on the display indicates that there has been a transferred call.

• The symbol on the display indicates that there has been a dialled number on a locked telephone.

• The symbol on the display indicates that there has been an automatic call.

• Name of the caller / conversation partner (if entered in the directory) and call number of the caller / conversation partner (if transmitted). The initial number of the caller is transmitted, and not that of the diverted device, if the call is an incoming call from a diverted call number.

Using the cursor keys you may now select an entry. Pressing the key (long) now, dials the displayed number. If you press the key, the menu Call List edit appears (refer to chapter 3.5.5 beginning on page 106).

3.5.2 Call List (inbound)

You may access this function using Menu > Call Lists > Calls (inbound).

The following is displayed if entries are available:

01 23.01.10 11:20 Peter 36

02 06.01.10 14:40 Peter 36

03 23.01.10 11:20 Peter 36

) Calls (inbound)

Figure 62: Menu Call List inbound

The Call List (inbound) contains, among others, the following information:

• Consecutive numbering of the entries, beginning with 01 for the last incoming call.

• Date and time of the calls.

• Success (connected/not connected).

The symbol on the display indicates that there has been a call.

• The symbol on the display indicates that there has been a redirected call.

• The symbol on the display indicates that there has been a transferred call.

• The symbol on the display indicates that there has been a dialled number on a locked telephone.

• The symbol on the display indicates that there has been an automatic call.

• Name of the caller (if entered in the telephone directory) and call number of the caller (if transmitted).

Using the cursor keys you may now select an entry. Pressing the key (long) now, dials the displayed number. If you press the key, the menu Call list edit appears (refer to chapter 3.5.5 on page 106).

3.5.3 Call List (outbound)

You can call up this function via the Menu > Call Lists > Calls (outbound) call-up.

The following is displayed if entries are available:

01 23.01.10 11:20 Peter 36

02 23.01.10 11:20 Peter 36

03 23.01.10 11:20 Peter 36

) Calls (outbound)

Figure 63: Menu Call List outbound

You can find further information in chapter 3.3.4 "Redialling" beginning on page 86.

The Call List (outbound) contains, among others, the following information:

• Consecutive numbering of the entries, beginning with 01 for the call number dialled last.

• Date and time of the calls.

• Success (connected/not connected).

The symbol on the display indicates that there has been a call.

• The symbol on the display indicates that there has been a redirected call.

• The symbol on the display indicates that there has been a transferred call.

• The symbol on the display indicates that there has been a dialled number on a locked telephone.

• The symbol on the display indicates that there has been an automatic call.

• Name of the conversation partner (if entered in the directory) and dialled call number.

Using the cursor keys you may now select an entry. Pressing the key (long) now, dials the displayed number. If you press the key, the menu Call list edit appears

3.5.4 Active Recalls

This function shows all active recalls.

You can call up this function via the Menu > Call Lists > Active Recalls call-up.

The following is displayed if entries are available:

01 23.01.03 11:20...

Figure 64: Menu Call Lists Active Recalls

3.5.5 Call List Edit

Figure 65: Menu Call List Edit

• If you use the cursor keys to select an item (incoming or outgoing call, but no automatic recall) and then press the key , the menu Call List Edit appears.

• If you use the cursor keys to select the menu item Information and then press the key , the menu Information appears (refer to chapter 3.5.5.1 beginning on page 107).

• If you use the cursor keys to select the menu item Save No. in Directory and then press the key, the menu Directory Input appears (refer to chapter 3.6.4 beginning on page 111). Here the entry may be edited and used in the telephone book.

• If you use the cursor keys to select the menu item Indirect dialling and then press the key, the device enters the Indirect dialling state. The display now shows only those telephone numbers that may be completed, changed or dialled (refer to chapter 3.3.3 beginning on page 82).

• If you use the cursor keys to select the menu item Delete Entry and then press the key, the call list entry will be deleted.

• If you use the cursor keys to select the menu item Delete List and then press the key, the complete Call List that was used to access this list entry, will be deleted.

3.5.5.1 Information (Call)

This menu shows details of the selected call.

1. Who called: name, telephone number.

2. Who was called up: name, telephone number.

3. Duration of the call: h:mm:ss (hours:minutes:seconds).

From:Meier 105 For:Schulze 106 Duration:0:23:45

Information

Figure 66: Menu Information (Call)

3.5.5.2 Information (transferred Call)

This menu shows details of the selected redirected, switched or transferred call.

1. Who called: name, telephone number.

2. Who was called up: name, telephone number.

3. Who has redirected, switched or transferred: name, telephone number.

4. Duration of the call: h:mm:ss (hours:minutes:seconds).

From:Meier 105 For:Schulze 106 Via: Müller 107 Duration:0:23:45

Information

Figure 67: Menu Information (transferred Call)