2.18.1.
Display
You can configure the display effect such as displaying time title and channel title, adjusting image transparency, and selecting the resolution.
Step1 Select Main Menu → DISPLAY → Display. The D is p la y interface is d isplayed . See Figure 2.19 7.
Fi gur e 2. 197
Step2 Configure the settings for the display parameters.
Parameter Description
Trans parency
Set the transparency of the local menu o f th e NVR device. The higher the transparency, the more transpar ent the local menu.
Time Display/C hannel Display
Selec t the check box and the date and ti me o f the system will be d isplayed in the p review screen.
Image E nhance Select the check box to optimize the previe w im age edges. IVS Rule Select the check box to display the IVS rules i n the preview
interface.
Original Scale C lick Setting and select the channel to restore the correspon ding channel image to the or iginal sc ale.
Main Screen Select VGA+HDMI1 or HDMI2.
Diffe rent devices displ ay dif ferent contents . S ee t he actual situation.
Screen E nable Select the check box to enable this screen. The image can only be disp layed when the screen is enabled.
Test Temperature Check the box to test the obj ect temperature, i ncluding trace the high/low temperature .
Resolution Support 192 0×10 80, 12 80×1 024 (defa ult), 12 80 ×720. Screen No. E nter the screen number you w ant to set the audio input.
C hannel Select the channel number.
Audio I nput Select from audio 1, audio 2 and mix output.
Step3 C lick Apply.
2.18.2.
Tour
You can configure a tour of selected channels to repeat playing videos. The videos display in turn according to the channel group configured in tour settings. The system displays one channel group for a certain period and then automatically changes to the next channel group.
Step1 Select Main Menu → DISPLAY → Tour. The Tour interface i s disp layed. See Figure 2.1 98.
On the top right of the live view screen, use the left mouse button or press Shift to switch, between (image switching is allowed) and (image switching is not allowed) to turn on/off the tour function. On the navigation bar, click to enable the tour and click to disable it.
Step2 Configure the settings for the tour parameters.
Parameter Des cription
E nable E nable tour function.
Interval (Sec. )
E nter the amount o f time that you want each ch annel grou p displays on the screen. The va lue ranges from 5 seconds to 120 seconds, an d the defau lt value is 5 secon d s .
Video Detect, Alarm
Select the View 1 or View 8 for Motion De tec t tour and Alarm Tour
(system ala rm events) .
Window Split In the Window Split list, select View 1, View 4, View 8, o r other modes that are supp orted by the Device.
C hannel Group
Display all channel groups under the current Window Split setting.
• Add a channel group: C lick Add, in the pop- up Add
Group channel, select the channels to form a group ,
and then click Save.
• Delete a channel gro up: Select the check box of an y channel group, and then click Delet e.
• E dit a channel group: Select the check box of any channel group and then click Modify or double - click on the group. The Modify Channel Group dialog box is disp layed. You can regroup the channels .
• C lick Move up or Move down to adj ust the positio n of channel gr oup.
Step3 Click Apply to save the settings.
2.18.3.
Customized Display
You can set customized video split mode.
• This function is for some series products. Refer to the actual product for detailed information. • Device max. supports 5 customized videos.
Step1 Select Ma in Menu → DISPLAY → Cus tom Split. The Cus tom Split interface is d isplayed . See Figure 2. 199 .
Fi gur e 2. 199
Step2 Click and then click to select basic mode.
System adopts the basic window mode as the new window name. For example, if you select the 8-display mode, the default name is Split8. In regular mode, drag the mouse in the preview frame; you can merge several small windows to one window so that you can get you desired split mode. See Figure 2.200.
• After merge the window, system adopts the remaining window amount as the new name such as Split6. • Select the window you want to merge (red highlighted), click to cancel the merge to restore the basic
mode.
Fi gur e 2. 200
Step3 C lick Apply to exit.
After the setup, you can go to the preview window, right click mouse and then select Custom Split. See Figure 2.2 01.
Audio
The audio function is to manage audio files and set schedule play function. It is to realize audio broadcast activation function.
This function is for some series product only.
2.19.1.
File Manage
You can add audio files, listen to audio files, rename and delete audio files, and configure the audio volume.
Step1 Select Main Menu → AUDIO → File Manager. The File Manager interface is di splayed. See Figure 2. 202 .
Fi gur e 2. 202
Step2 Click Add.
The Add interface is displayed. See Figure 2.203.