[1] M. a. Tavakkoli and S. M. Madani, “A new approach to analysis and mitigation of PM motor cogging torque,” Proc. - 34th Annual Conference of IEEE on Industrial Electronic IECON 2008, vol. 1, pp. 2003–2008, 2008. [2] A Hartman and W. Lorimer, “Cogging Torque Control in Brushless DC
Motors,” Motion Control System Devies, vol. 2, no. 6, pp. 4287–4289, 2000. [3] Z. Q. Zhu and D. Howe, “Analytical prediction of the cogging torque in
radial-field permanent magnet brushless motors,” IEEE Transaction on Magnetic, vol. 28, no. 2, pp. 1371–1374, 1992.
[4] M. Aydin and T. a. Lipo, “Cogging torque minimization technique for multiple-rotor, axial-flux, surface-mounted-PM motors: alternating magnet pole-arcs in facing rotors,” 3 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003, vol. 1, no. August 2016, pp. 555–561, 2003.
[5] Y. Yang, X. Wang, R. Zhang, T. Ding, and R. Tang, “The optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magnet motors,” IEEE Transaction on Magnetic, vol. 42, no. 4, pp. 1135– 1138, 2006.
[6] I. Trifu and T. Tudorache, “Cogging Torque Optimization of a Four-Pole PM Machine,” 2013 8th International Symposium on Advanced Topics in Electrical Engineering (ATEE), no. 2, pp. 2068-7966, 2013.
[7] Y. Chun, D. Koo, Y. Cho, W. Cho, and a B. Structure, “Cogging Torque Reduction in a Novel Axial Flux PM Motor,” International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. pp. 16–19, 2006.
[8] J. Wang, L. Zhou, T. Yang, and Y. Wang, “Cogging torque reduction in interior permanent magnet brushless dc motor with flux-concentration type rotor,” 2009 International Conference on Electrical Machine System, pp. 1–6, 2009.
[9] D. Xu, M. Lin, X. Fu, L. Hao, W. Zhang, and N. Li, “Cogging Torque Reduction of a Hybrid Axial Field Flux-Switching Permanent-Magnet Machine with Three Methods,” IEEE Transaction on Applied Superconductor, vol. 26, no. 4, pp. 4–8, 2016.
[10] D. Dorrell, “Design techniques in brushless permanent magnet motors,” IEEE Transaction on Magnetic, vol. 30, no. 6, pp. 4287–4289, 2010.
[11] C. Studer, a. Keyhani, T. Sebastian, and S. K. Murthy, “Study of cogging torque in permanent magnet machines,” IAS ’97. Conference Record 1997 IEEE Indusrial Application Conference, Thirty-Second IAS Annual Meeting, vol. 1, pp. 42–49, 1997.
[12] R. Lateb, N. Takorabet, and F. Meibody-Tabar, “Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors,” IEEE Transaction on Magnetic, vol. 42, no. 3, pp. 442–445, 2006. [13] J. M. Ling and T. Nur, “Influence of edge slotting of magnet pole with fixed
slot opening width on the cogging torque in inset permanent magnet synchronous machine,” The 2nd IEEE Conference on Power Engineering and Renewable Energy (ICPERE) 2014, vol. 8, no. 8, pp. 1–9, 2016.
[14] D. Wang, X. Wang, M. K. Kim, and S. Y. Jung, “Integrated optimization of two design techniques for cogging torque reduction combined with analytical method by a simple gradient descent method,” IEEE Transaction on Magnetic, vol. 48, no. 8, pp. 2265–2276, 2012.
[15] G. C. Lee and T. U. Jung, “Optimal cogging torque reduction design of dual stator radial flux permanent magnet generator,” 2 2013 15th European Conference on Power Electronics and Applications (EPE), vol. 1, 2013. [16] H. C. Yu, B. S. Yu, J. Te Yu, and C. K. Lin, “A dual notched design of radial-
flux permanent magnet motors with low cogging torque and rare earth material,” IEEE Transaction on Magnetic, vol. 50, no. 11, 2014.
[17] K. Abbaszadeh, F. R. Alam, and S. a. Saied, “Cogging torque optimization in surface-mounted permanent-magnet motors by using design of experiment,” Energy Conversion and Management., vol. 52, no. 10, pp. 3075–3082, 2011. [18] M. Aydin and M. Gulec, “Reduction of cogging torque in double-rotor axial-
flux permanent-magnet disk motors: A review of cost-effective magnet- skewing techniques with experimental verification,” IEEE Transaction on Industrial Electronic, vol. 61, no. 9, pp. 5025–5034, 2014.
[19] R. E. Hanitsch, M. S. Widyan, and R. Grune, “Cogging Torque Reduction of a Novel Low-Speed High-Energy Permanent-Magnet Electrical Machine,” International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. pp. 1–6, 2006.
[20] G. S. Babu, T. M. Krishna, and B. V. Reddy, “A Comparative Analysis of Cogging Torque Reduction in BLDC Motor Using Bifurcation and Slot Opening Variation,” American Journal of Electrical Power and Energy Systems, Pages: 9-12 vol. 4, pp. 9–12, 2015.
[21] W. Zhao, T. a. Lipo, and B. Il Kwon, “Material-efficient permanent-magnet shape for torque pulsation minimization in SPM motors for automotive applications,” IEEE Transaction on Industrial Electronic, vol. 61, no. 10, pp. 5779–5787, 2014.
[22] Y. Pang, Z. Q. Zhu, and Z. J. Feng, “Cogging torque in cost effective surface mounted permanent magnet machines,” IEEE Transaction on Magnetic, vol. 47, no. 9, pp. 2269–2011, 2011.
[23] A. Kumar, S. Marwaha, and A. Marwaha, “Comparison of methods of minimization of cogging torque in wind generators using FE analysis,” Journal of Indian Institute of Science, vol. 86, pp. 355–362, 2006.
83 [24] N. Diga, C. Ghita, C. Stoica, and S. M. Diga, “Particular aspects of the cogging torque reduction for permanent magnet synchronous motors using specialized software,” 2015 7th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), pp. WF27–WF30, 2015.
[25] L. Hao, M. Lin, D. Xu, and W. Zhang, “Cogging Torque Reduction of Axial Field Flux-Switching Permanent Magnet Machine by Adding Magnetic Bridge in Stator Tooth,” IEEE Transaction on Applied Superconductor, vol. 24, no. 3, 2014.
[26] T. Liu, S. Huang, J. Gao, and K. Lu, “Cogging torque reduction by slot- opening shift for permanent magnet machines,” IEEE Transaction on Magnetic, vol. 49, no. 7, pp. 4028–4031, 2013.
[27] D. A. González, J. A. Tapia, and A. L. Bettancourt, “Design consideration to reduce cogging torque in axial flux permanent-magnet machines,” IEEE Transaction on Magnetic., vol. 43, no. 8, pp. 3435–3440, 2007.
[28] D. Wu and Z. Q. Zhu, “Design Trade-off between Cogging Torque and Torque Ripple in Fractional Slot Surface- Mounted Permanent Magnet Machines,” 2015 IEEE International Magnetics Conference (INTERMAG), vol. 15, no. 4, pp. 2015, 2015.
[29] R. Somanatham, P. V. N Prasad, A. D. Rajkumar, “Reduction of Cogging Torque in PMBLDC Motor with Reduced Stator Tooth Width and Burificated Surface Area using Finite Element Analysis.” 2011 1st International Conference on Electrical Energy Systems, vol. 40, pp. 128 - 132, 2011.
[30] A. L. I. Jabbari, “The Effect of Slot Skewing and Dummy Slots on Pulsating Torque Minimization in Permanent Magnet Brushless Dc Motors,” 2016 Iranian Conference on Renewable Energy & Distributed Generation (ICREDG), vol. 1, no. 2, pp. 404–409, 2014.
[31] T. Sebastian, “Issues in Reducing the Cogging Torque of Mass-produced Permanent Magnet Brushless DC Motor,” IEEE Transactions on Industry Applications, vol. 40, pp. 813 - 820, 2003.
[32] S. M. Hwang, J. B. Eom, Y. H. Jung, D. W. Lee, and B. S. Kang, “Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motors,” IEEE Transaction on Magnetic, vol. 37, no. 4 I, pp. 2806–2809, 2001.
[33] H. S. Ko and K. J. Kim, “Characterization of noise and vibration sources in interior permanent-magnet brushless DC motors,” IEEE Transaction on Magnetic, vol. 40, no. 6, pp. 3482–3489, 2004.
[34] W. Ren, Q. Xu, Q. Li, and L. Zhou, “Reduction of Cogging Torque and Torque Ripple in Interior PM Machines with Asymmetrical V-Type Rotor Design,” IEEE Transaction on Magnetic, vol. 52, no. 7, pp. 4–7, 2016.
[35] S. H. Lee, K. K. Han, H. J. Ahn, G. H. Kang, Y. D. Son, and G. T. Kim, “A study on reduction of vibration based on decreased cogging torque for interior type permanent magnet motor,” 2008 IEEE Industry Applications Society Annual Meeting, vol. 1, no. mm, pp. 6–11, 2008.
[36] J. F. Gieras, “Analytical approach to cogging torque calculation in PM brushless motors,” IEEE Transactions on Industry Applications, vol. 2, no. 5, pp. 815–819, 2003.
[37] K. Seo, Y. Kim, and S. Jung, “Stator Teeth Shape Design for Torque Ripple Reduction in Surface-Mounted Permanent Magnet Synchronous Motor,” 2014 17th International Conference on Electrical Machines and Systems (ICEMS), pp. 387–390, 2014.
[38] R. Liu, R. Wang, and J. Li, “Reduction of cogging torque in surfacemounted permanent magnet brushless motor based on Motorsolve,” 2012 IEEE Innovation on Smart Grid Technology - Asia, ISGT Asia 2012, pp. 3–6, 2012. [39] X. Zhu, W. Hua, and M. Cheng, “Cogging Torque Minimization in Flux-
Switching Permanent Magnet Machines by Tooth Chamfering,” 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp.1-7, 2016.
[40] K. Yong-Su, K. Tae Heoung, K. Young Tae, O. Won Seok, and L. Ju, “Various design techniques to reduce cogging torque in flux-reversal machines,” 2005 International Conference on Electrical Machines and Systems, vol. 1, pp. 261–263 Vol. 1, 2005.
[41] L. Dosiek, “Cogging Torque Reduction in Permanent Magnet Machines,” IEEE Transactions on Industry Applications, vol. 43, no. 6, pp. 44–49, 2006. [42] W. Fei and P. C. K. Luk, “Cogging torque reduction techniques for axial-flux
surface-mounted permanent-magnet segmented-armature-torus machines,” 2008 IEEE International Symposium on Industrial Electronics, pp. 485–490, 2008.
[43] T. Tudorache, L. Melcescu, and M. Popescu, “Methods for cogging torque reduction of directly driven PM wind generators,” 2010 12th International Conference on Optimization of Electrical and Electronic Equipment, no. 1, pp. 1161–1166, 2010.
[44] S. Saravanan, M. A. N. Doss, S. Jeevananthan, and S. Vidyasagar, “Reduction of cogging torque by adopting semi circled permanent magnet,” 2011 1st International Conference on Electrical Energy Systems, no. 5, pp. 149–153, 2011.
[45] L. Wu, W. Jin, J. Ni, and J. Ying, “A cogging torque reduction method for surface mounted permanent magnet motor,” 2007 International Conference on Electrical Machines and Systems (ICEMS), vol. 2, no. 7, pp. 769–773, 2007. [46] T. Srisiriwanna and M. Konghirun, “A Study of Cogging Torque Reduction
Methods in Brushless Dc Motor,” 2012 9th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 1–4, 2012.
[47] D. Wang, X. Wang, and S. Y. Jung, “Cogging torque minimization and torque ripple suppression in surface-mounted permanent magnet synchronous machines using different magnet widths,” IEEE Transaction on Magnetics, vol. 49, no. 5, pp. 2295–2298, 2013.
85 [48] D. C. Hanselman, “Effect of skew, pole count and slot count on brushless motor radial force, cogging torque and back EMF,”IEE Proceedings - Electric Power Applications, vol. 144, no. 5, p. 325, 1997.
[49] A. N. Patel and J. R. Patel, “Analysis of Cogging Torque Reduction by Increasing Stator Slot Depth in Brushless DC Motor,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), vol. 7, no. 10, pp. 1077–1082, 2014.
[50] L. Parsa and L. Hao, “Interior permanent magnet motors with reduced torque pulsation,” IEEE Transaction on Industrial Electronic, vol. 55, no. 2, pp. 602– 609, 2008.
[51] M. Aydin, “Magnet skew in cogging torque minimization of axial gap permanent magnet motors,” 2008 18th International Conference on Electrical Machines, pp. 1–6, 2008.
[52] M. Łukaniszyn, M. JagieŁa, and R. Wróbel, “Optimization of permanent magnet shape for minimum cogging torque using a genetic algorithm,” IEEE Transaction on Magnetics, vol. 40, no. 2 II, pp. 1228–1231, 2004.
[53] W. Fei, P. Chi, K. Luk, S. Member, J. Shen, and S. Member, “ Torque Analysis of Permanent Magnet Flux Switching Machine with Rotor Step Skewing,” IEEE Transactions on Magnetics, vol. 48, no. 10, pp. 2664–2673, 2012.
[54] Y. Kawaguchi, T. Sato, I. Miki, and M. Nakamura, “A Reduction Method of Cogging Torque for IPMSM,” 2005 International Conference on Electrical Machines and Systems, pp. 248–250, 2005.
[55] L. Fang, S.-O. Kwon, T. Sun, and J.-P. Hong, “Optimal shape design of double-barriers in single-layer interior PM synchronous motor for reducing torque pulsation,” 2010 International Conference on Electrical Machines and Systems, no. 5, pp. 1239–1241, 2010.
[56] L. Fang, S. Il Kim, S. O. Kwon, and J. P. Hong, “Novel double-barrier rotor designs in interior-PM motor for reducing torque pulsation,” IEEE Transaction on Magnetics, vol. 46, no. 6, pp. 2183–2186, 2010.
[57] H. U. Kim, Y. B. Kim, and P. S. Shin, “A Notch Shape Optimization of IPMSM Rotor Surface for Cogging Torque Reduction by PSO Method with FEM,” 2013 International Conference on Electrical Machines and Systems (ICEMS), pp. 1118–1121, 2013.
[58] G. Kang, S. Member, Y. Son, and G. Kim, “A Novel Cogging Torque Reduction Method for Interior Type Permanent Magnet Motor,” IEEE Transactions on Industry Applications, vol. 45, pp. 119–125,2009.
[59] S. Lee, K. Han, H. Ahn, G. Kang, Y. Son, and G. Kim, “A Study on Reduction of Vibration Based on Decreased Cogging Torque for Interior Type Permanent Magnet Motor,” 2008 IEEE Industry Applications Society Annual Meeting, vol. 1, pp. 6–11, 2008.
[60] L. Hao, M. Lin, D. Xu, N. Li, and W. Zhang, “Cogging Torque Reduction of Axial-Field Flux-Switching Permanent Magnet Machine by Rotor Tooth Notching,” IEEE Transaction on Magnetic, vol. 51, no. 11, pp. 2–5, 2015.
[61] W. H. W. Hua and M. C. M. Cheng, “Cogging torque reduction of flux- switching permanent magnet machines without skewing,” 2008 International Conference on Electrical Machines and Systems, vol. 2, pp. 3020–3025, 2008. [62] G. H. Kang, J. Hur, W. B. Kim, and B. K. Lee, “The shape design of interior
type permanent magnet BLDC motor for minimization of mechanical vibration,” 2 2009 IEEE Energy Conversion Congress and Exposition, pp. 2409–2414, 2009.
[63] W. Fei and Z. Q. Zhu, “Comparison of cogging torque reduction in permanent magnet brushless machines by conventional and herringbone skewing techniques,” IEEE Transaction on Energy Conversion, vol. 28, no. 3, pp. 664– 674, 2013.
[64] V. Grǎdinaru, L. Tutelea, and I. Boldea, “25 kW, 15 krpm, 6/4 PMSM: Optimal design and torque pulsation reduction via FEM,” 11th International Conference of Optimization Electric Electronic Equipment, OPTIM 2008, pp. 249–256, 2008.
[65] G. Dajaku and D. Gerling, “Skewing Effect on the PM Flux-Linkage High Harmonics of the PM Machines with Delta Winding,” 2009 13th European Conference on Power Electronics and Applications, pp. 1–7, 2009.
[66] Z. Li, S. Jiang, Z. Z. Qiang, and C. Chan, “Optimal slot opening in permanent magnet machines for minimum cogging torque,” IEEE Transactions on Magnetics, no. 3, pp. 1–5, 2011.
[67] N. Levin, S. Orlova, V. Pugachov, B. Ose-Zala, and E. Jakobsons, “Methods to Reduce the Cogging Torque in Permanent Magnet Synchronous Machines,” IECON 2016 42nd Annual Conference of the IEEE Industrial Electronics Society, vol. 19, no. 1, pp. 23–26, 2013.
[68] C. Bianchini, F. Immovilli, E. Lorenzani, A. Bellini, and M. Davoli, “Review of design solutions for internal permanent-magnet machines cogging torque reduction,” IEEE Transaction on Magnetic, vol. 48, no. 10, pp. 2685–2693, 2012.
[69] G.-C. Lee and T.-U. Jung, “Design of dual structural axial flux permanent magnet generator for small wind turbine,” TENCON Spring Conference 2013 (IEEE), vol. 8, no. 6, pp. 90–94, 2013.
[70] W. Fei and P. C. K. Luk, “A new technique of cogging torque suppression in direct-drive permanent-magnet brushless machines,” IEEE Transaction of Industry Application, vol. 46, no. 4, pp. 1332–1340, 2010.
[71] D. Wang, X. Wang, and S. Jung, “Design Techniques for Reducing Cogging Torque in Permanent Magnet Flux Switching Machine,” 2014 17th International Conference on Electrical Machines and Systems (ICEMS), vol. 18, no. 3, pp. 361–364, 2013.
[72] J. Xintong, X. Jingwei, L. Yong, and L. Yongping, “Theoretical and simulation analysis of influences of stator tooth width on cogging torque of BLDC motors,” IEEE Transaction of Magnetic, vol. 45, no. 10, pp. 4601– 4604, 2009.
87 [73] T. Yabumi, “Reduction of Cogging Torque in Permanent Magnet Motors,” J
Magn. Soc. Japan, vol. 31, no. 1, pp. 23–30, 2007.
[74] Sang-Moon Hwang, Jae-Boo Eom, Geun-Bae Hwang, Weui-Bong Jeong, and Yoong-Ho Jung, “Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing,” IEEE Transaction of Magnetic, vol. 36, no. 5, pp. 3144–3146, 2000.
[75] L. Hao, M. Lin, D. Xu, N. Li, and W. Zhang, “Analysis of Cogging Torque Reduction Techniques in Axial-Field Flux-Switching Permanent-Magnet Machine,” IEEE Transaction Application in Superconductor, vol. 26, no. 4, 2016.
[76] Y. Wang, M. J. Jin, W. Z. Fei, J. X. Shen, Y. W. M. J. Jin, and W. Z. F. J. X. Shen, “Cogging torque reduction in permanent magnet flux-switching machines by rotor teeth axial pairing,” IET Electrical Power Appication., vol. 4, no. 7, p. 500, 2010.
[77] G. C. Lee and T. U. Jung, “Cogging torque reduction design of dual stator radial flux permanent magnet generator for small wind turbine,” IEEE 2013 Tencon - Spring, TENCON Spring 2013, pp. 85–89, 2013.
[78] L. Hao, M. Lin, D. Xu, W. Zhang, and N. Li, “Rotor design techniques for reducing the cogging torque in a novel dual-rotor axial field flux-switching permanent magnet machine,” 2014 17th Int. Conf. Electr. Mach. Syst. ICEMS 2014, pp. 1581–1586, 2015.
[79] Q. He and Q. Wang, “Design techniques for reducing cogging torque in low- speed permanent magnet wind power generator,” 2011 International Conference of Electrical Machine System, pp. 1–3, 2011.
[80] S. Hemmati, S. Member, S. Shokrikojoori, R. Ghobadi, S. Member, and M. I. Ghiasi, “A Practical Approach to Cogging Torque Reduction In a Permanent Magnet Synchronous Motor Using Non-dominated Sorting Genetic Algorithm,” 4th Annual International Power Electronics, Drive Systems and Technologies Conference, pp. 0–4, 2013.
[81] G.-C. Lee, S.-M. Kang, and T.-U. Jung, “Permanent magnet structure design of outer rotor radial flux permanent magnet generator for reduction cogging torque with design of experiment,” 2013 International Conference on Electrical Machines and Systems (ICEMS), pp. 315–319, 2013.
[82] W. Xu, J. Zhu, Y. Zhang, and J. Hu, “Cogging torque reduction for radially laminated flux-switching permanent magnet machine with 12/14 poles,” IECON Proc. (Industrial Electronic Conference, pp. 3590–3595, 2011.
[83] G. Zhang, W. Fengxiang, and S. Yongshan, “Reduction of rotor loss and cogging torque of high speed PM machine by stator teeth notching,” Proceeding International Conference in Electrical Machine System ICEMS 2007, no. 1, pp. 856–859, 2007.
[84] C. Bianchini, F. Immovilli, A. Bellini, and M. Davoli, “Cogging torque reduction methods for internal permanent magnet motors: Review and comparison,” The XIX International Conference on Electrical Machines - ICEM 2010, pp. 1–6, 2010.
[85] M. Nakano and Y. Morita, “Reduction of Cogging Torque Due to Production Tolerances of Rotor by Using Partially Placed Dummy Slots in Axial Direction,” IEEE Transactions on Industry Applications, vol. 51, no. 1, pp. 5579–5586, 2014.
[86] L. Zhu, S. Z. Jiang, Z. Q. Zhu, and C. C. Chan, “Analytical methods for minimizing cogging torque in permanent-magnet machines,” IEEE Transaction on Magnetic, vol. 45, no. 4, pp. 2023–2031, 2009.
[87] J. H. Hu, L. Wang, J. B. Zou, and B. Zhao, “Cogging torque reduction of hybrid excitation flux switching motor,” 5th International. Conference on Instrument Measurement Computer and Communication Control. IMCCC 2015, vol. 2, no. 5, pp. 1889–1892, 2015.
[88] N. Bianchi and S. Bolognani, “Design techniques for reducing the cogging torque in surface-mounted PM motors,” IEEE Transaction on Industrial Application., vol. 38, no. 5, pp. 1259–1265, 2002.
[89] T. Liu, S. Huang, and J. Gao, “A Method for Reducing Cogging Torque by Magnet Shifting in Permanent Magnet Machines,” 2010 International Conference on Electrical Machines and Systems, no. 50907020, pp. 2–5. [90] V. Keloth, M. Mijas, P. a. Manu, P. Thomas, V. M. Menon, and R. P. Praveen,
“Analysis of cogging torque reduction techniques of a slotless PMBLDC motor,” 2 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD), pp. 1-7,2014. [91] P. S. Shin, S. H. Woo, Y. Zhang, and C. S. Koh, “An application of Latin
hypercube sampling strategy for cogging torque reduction of large-scale permanent magnet motor,” IEEE Transaction on Magnetic, vol. 44, no. 11 PART 2, pp. 4421–4424, 2008.
[92] C. a. Borghi, D. Casadei, A. Cristofolini, M. Fabbri, and G. Serra, “Application of a multiobj active minimization technique for reducing the torque ripple in permanent-magnet motors,” IEEE Transaction Magnetic., vol. 35, no. 5, pp. 4238–4246, 1999.
[93] J. Wanjiku, M. a. Khan, P. S. Barendse, and P. Pillay, “Influence of Slot Openings and Tooth Profile on Cogging Torque in Axial-Flux PM Machines,” IEEE Transaction on Industry Electronic, vol. 62, no. 12, pp. 7578–7589, 2015.
[94] O. Kudrjavtsev and A. Kilk, “Cogging Torque Reduction Methods,” 2014 Electric Power Quality and Supply Reliability Conference (PQ), pp. 251-254. [95] K. Abbaszadeh, F. Rezaee Alam, and M. Teshnehlab, “Slot opening
optimization of surface mounted permanent magnet motor for cogging torque reduction,” 2011 1st International Electric Drives Production Conference, vol. 55, pp. 108–115, 2012.
[96] G. Lee and T. Jung, “Design of Stator Tooth Pairing Structure on Outer Rotor Radial Flux Permanent Magnet Generator for Cogging Torque Reduction,” IEEE 2013 Tencon - Spring, no. 2, p. 11.