7 Asset TAGs
9/2 SIMATIC PCS 7 BOX
9/2 SIMATIC PCS 7 BOX
9
■
OverviewSIMATIC PCS 7 BOX are space-saving and at the same time very rugged industrial PC systems for economical entry into process automation with SIMATIC PCS 7. They are available as compact systems with SIMATIC PCS 7 functionality for engi-neering (ES), automation (AS), operator control and monitoring (OS), and also as OS Runtime systems without an engineering component.
SIMATIC PCS 7 BOX for operation as a client in an operator system or in SIMATIC BATCH can be found in the section
"Industrial Workstation/IPC" under "SIMATIC BOX PC".
Product versions
The first criterion for choosing the offered SIMATIC PCS 7 BOX product versions is the decision between integrated or swapped-out automation functionality (AS):
• AS integrated:
SIMATIC PCS 7 BOX RTX with internal WinAC RTX software controller and Windows 7 Ultimate SP1 (32-bit) operating system
• AS separate:
SIMATIC PCS 7 BOX RTX with external controller and Windows 7 Ultimate SP1 (64-bit) operating system - SIMATIC PCS 7 AS RTX Microbox automation system - SIMATIC PCS 7 AS mEC RTX automation system - Modular automation system of the S7-400 series as
AS single station or AS redundancy station
This selection is associated with the decision for a specific controller type. It depends on the price/performance ratio as well as on the hardware and software functions that are possible with the various controller combinations (see table in the "Function section).
Depending on the integration of the engineering component (ES) in the system functionality, there is then a further differenti-ation within the preselection:
• ES/OS system:
- SIMATIC PCS 7 BOX RTX with ES + OS + AS functionality - SIMATIC PCS 7 BOX with ES + OS functionality
• OS Runtime system:
- SIMATIC PCS 7 BOX RTX with OS + AS functionality - SIMATIC PCS 7 BOX with OS functionality
System overview of SIMATIC PCS 7 BOX compact systems
ES/OS system
WinAC RTX controller integrated
PCS 7 AS RTX (Microbox AS) as additional controller
PCS 7 AS mEC RTX as additional controller
Modular AS 41x, AS 41xH or AS 41xF (AS Single or AS Redundancy Station) as additional controller
OS Runtime ES/OS system OS Runtime
System functionality Possible
controller combina-tions
PCS 7 BOX RTX PCS 7 BOX
ES + OS + AS OS + AS ES + OS OS
9
■
Overview (continued)A complete process control system for small applications can be implemented by expanding further with process I/O:
• Distributed process I/O at PROFIBUS: Remote I/O stations ET 200M, ET 200iSP, ET 200S and ET 200pro as well as directly connected field devices/process devices (with WinAC RTX and in combination with PCS 7 AS RTX or AS S7-400)
• Field devices/process devices at FOUNDATION Fieldbus (in combination with AS S7-400)
• Remote I/O stations ET 200M or ET 200SP at PROFINET IO (in combination with AS S7-400 or PCS 7 AS mEC RTX)
• I/O modules S7-300 directly at AS (in combination with PCS 7 AS mEC RTX)
■
ApplicationThe SIMATIC PCS 7 BOX compact systems are ideally suitable for use at process level, especially for:
• Small production applications
• Enclosed subprocesses (package units)
• Automation of a laboratory or test center
As fully-fledged members of the SIMATIC PCS 7 family, SIMATIC PCS 7 BOX systems work with the PCS 7 standard system soft-ware; they are scalable and can be extended without a break in compatibility.
The application is limited to 2 000 POs (process objects) in accordance with the Engineering and OS Runtime licenses. The max. number of POs of the AS Runtime licenses depends on the type of controller (for more information on this, see below under
"Design", software and licenses).
As an ES/OS system, expanded by software licenses that can be ordered separately for SIMATIC PDM and SIMATIC PCS 7 Main-tenance Station, SIMATIC PCS 7 BOX can also be operated as a maintenance station. For additional information on this, please refer to the chapter "Plant Device Management".
SIMATIC PCS 7 BOX systems with a separate, external controller are additionally suitable for SIMATIC BATCH (up to 10 units) or as a Web server (Windows 7 Ultimate 64-bit operating system) for up to two Web clients.
■
DesignSIMATIC PCS 7 BOX RTX design
System platform for all offered SIMATIC PCS 7 BOX product versions is the sturdy industrial SIMATIC IPC627D which can be used in accordance with its CE marking in industrial ments as well as in domestic, business and commercial environ-ments.
Special properties and equipment features
The SIMATIC Box PC, based on Intel Core i3 or Xeon processor technology combines high performance with compact design.
Additionally, it has the following features:
• Stable platform available for a period of about 5 years with embedded Intel components (spare parts supply and repairs for approx. 5 years)
• Rugged metal enclosure with IP20 degree of protection with high electromagnetic compatibility.
• Powerful and energy-saving Intel multi-core processors XEON E3 or Core i3
• Powerful Intel graphics controller HD Graphics 4600 onboard, integrated in the processor:
- 2 digital interfaces DVI-I and DisplayPort (DVI-D via DisplayPort DVI adapter)
- Analog VGA connection via DVI-I adapter to VGA or DisplayPort to VGA
• Support of multi-monitor mode with two process monitors via onboard graphics:
- 1 × process monitor at DVI-I connection
- 1 × process monitor at DisplayPort via DisplayPort to DVI-D adapter cable
• Alternative design version of Panel Front: SIMATIC PCS 7 BOX with fixed 22" TFT display with touch screen, resolution 1920 × 1080
• Flexible installation in various positions with mounting brackets or portrait installation kits
• High shock/vibration resistance in all possible mounting positions
• Variable power supply: 24 V DC or 110/230 V AC (100 ... 240 V)
• Maximum processor performance up to an ambient temperature of 55 °C
• Integrated drives:
- 1 × optical drive SATA DVD±R/RW or as alternative:
On/Off switch 100 ... 240 V AC PCI/PCIe expansion slots
Status displays
9
■
Design (continued)• Numerous high-performance interfaces:
- 4 × USB 3.0 (SuperSpeed), external
- 1 × USB 3.0 (SuperSpeed), internal, e.g. for ASIA license key, hardlock USB
- 1 × USB 3.0 (SuperSpeed) external, on front (Panel Front design version only)
- 1 × serial (COM1)
- 1 × DVI-I interface (DVI/VGA combined; VGA via adapter cable)
- 1 × DisplayPort (DVI-D or VGA via adapter cable) - 2 × Ethernet 10/100/1000 Mbps (RJ45)
- 1 x PROFIBUS DP (CP 5622-compatible)
- 1 × PCI-Express x16 (185 mm) and 1 × PCI (185 mm), vacant for expansions
• Integrated diagnostic displays (4 dual-color LEDs for status display of the operating state)
• Monitoring and diagnostics functions available in combination with the SIMATIC IPC DiagMonitor diagnostics software for:
- Temperatures
- Backup battery voltage - HDD/SSD status (S.M.A.R.T.) - System status (Watchdog) - Fan speed
- Operating hours counter
• Certification for worldwide marketing (cULus)
• Fast restoration of the delivery state with supplied restore DVD Product version SIMATIC PCS 7 BOX RTX
A WinAC RTX 2010 software controller is already integrated in the SIMATIC PCS 7 BOX RTX. The SIMATIC PCS 7 BOX product version with integrated controller works with the Windows 7 Ulti-mate SP1 (32-bit) operating system. It is characterized by an exceptionally good price/performance ratio and very fast program processing. The controller generates only a low base load, and shows its strengths particularly with applications that involve real-time requirements and deterministic dynamic response.
In a direct comparison, product versions with external control-lers offer slightly more functionality, resulting in additional appli-cation possibilities (see table in the section "Function").
Design versions/expandability
The SIMATIC PCS 7 BOX in standard design is a compact computing unit with HMI devices (mouse, keyboard, process monitor) that can be ordered separately and are connected by means of integrated ports/interfaces.
The device is equipped with four USB 3.0 ports for mouse and keyboard as well as additional USB input/output devices, e.g.
chip card reader USB.
Two process monitors can be controlled in multi-monitor mode via the integrated digital graphic interfaces DVI-I and DVI-D (via adapter cable at the DisplayPort). The selection of the process monitors depends on the technical data of the integrated graphics as well as the image formats and resolutions which can be adjusted in the project editor of the OS software (see section:
Operator System, OS Software, Introduction).
As an alternative to the SIMATIC PCS 7 BOX in standard design, we are offering a built-in unit with Panel Front according to SIMATIC IPC677D which can be mounted in mounting cutouts of control cabinets, enclosures or consoles as well as on swivel arms.
With the built-in unit, a panel with 22" TFT display and touch screen is permanently connected with the computing unit. The 22" TFT display has a resolution of 1920 × 1080 pixels. An addi-tional USB 3.0 port for connection of external I/O devices is available on the Panel Front on the left below the display.
SIMATIC PCS 7 BOX with Panel Front, side and front views
9
■
Design (continued)Stand-alone operation/plant network
SIMATIC PCS 7 BOX in stand-alone mode
SIMATIC PCS 7 BOX systems can be operated in stand-alone mode and also in the system network with other SIMATIC PCS 7 system components.
A system produced with the SIMATIC PCS 7 BOX can be expanded at any time with additional SIMATIC PCS 7 hardware and software components. It is just as easy to integrate SIMATIC PCS 7 BOX into existing SIMATIC PCS 7 systems. The connec-tions to the plant bus and terminal bus are usually made via the integrated Ethernet interfaces.
In association with the redundant AS 41xH modular controllers, however, an additional CP 1623, CP 1628 or CP 1613 A2 communication module with appropriate communications soft-ware is required for the Industrial Ethernet plant bus (see section Communication, Industrial Ethernet, System connection of PCS 7). This can be operated at an expansion slot of the appro-priate interface type: PCI Express (CP 1623/1628) or PCI (CP 1613 A2).
Example of SIMATIC PCS 7 BOX integration in a SIMATIC PCS 7 plant network
Engineering
The SIMATIC PCS 7 BOX can be configured by using either the engineering software integrated in the system or a central engi-neering system. OS-specific configuration changes can be loaded online, i.e. terminated without the OS process mode.
Individual product configuration
By selecting predefined equipment features, you can individu-ally configure the SIMATIC PCS 7 BOX with the desired article numbers. To do so, selection tables are available in the
"Ordering data" section of the PDF and in the printed edition of the catalog.
A configurator in the Industry Mall allows you to interactively select and order SIMATIC PCS 7 BOX compact systems.
DP/PA link
PROFIBUS DP/MPI
PROFIBUS PA
G_PCS7_XX_00065
SIMATIC PCS 7 BOX
Terminal bus
Plant bus
DP/PA link
OS clients
OS server
Engineering system
Automation systems
PROFIBUS PA SIMATIC
PCS 7 BOX
G_PCS7_XX_00054
PROFIBUS DP/MPI
9
■
Design (continued) Software and licensesSoftware and licenses of the SIMATIC PCS 7 BOX product versions On delivery, the individual SIMATIC PCS 7 BOX product versions are equipped as follows with process objects for process mode:
PCS 7 BOX RTX PCS 7 BOX
ES/OS system OS Runtime ES/OS system OS Runtime PC spare part
Article No. 6ES7650-4B.00-1F.. 6ES7650-4B.00-1G.. 6ES7650-4B.81-1H.. 6ES7650-4B.81-1J.. 6ES7650-4B…-8X..
System functionality ES + OS + AS OS + AS ES + OS OS None (without PCS 7
software/licenses) Supplied PCS 7 software/licenses
SIMATIC PCS 7 Runtime license RTX,
Article No. 6ES7650-1CL00-2XB5 n n
SIMATIC WinAC RTX 2010, Article No.
6ES7671-0RC08-0YA0 n n
SIMATIC PCS 7 ES Single Station V8.1 with 250 AS/OS Runtime POs, Article No. 6ES7651-5AA18-0YA0
n n
SIMATIC PCS 7 OS Software Single Sta-tion V8.1 (250 OS Runtime PO), analog Article No. 6ES7658-2AA18-0YA0 but with 250 OS Runtime POs each
n n
SIMATIC PCS 7 AS Runtime license for
250 AS RT POs n
SIMATIC PCS 7 BCE V8.1 Runtime license, Article No. 6ES7650-1CD18-2YB5
n n
SIMATIC PCS 7 V8.1 Software Media Package, Article No. 6ES7658-4XX18-0YT8
n n n n
Software types of delivery
Preinstallation on system hard disk cor-responds to content of restore DVD Set 1
n n
Preinstallation on system hard disk cor-responds to content of restore DVD Set 2
n n
Restore DVD Set 1:
Windows 7 Ultimate SP1 32-bit operat-ing system with default settoperat-ings for opti-mized PCS 7 operation incl. PCS 7 software installation for SIMATIC PCS 7 BOX operation
n n
Restore DVD Set 2:
Windows 7 Ultimate 64-bit operating system with default settings for opti-mized PCS 7 operation incl. PCS 7 soft-ware installation for SIMATIC PCS 7 BOX operation
n n
Recovery CD Windows 7 Ultimate SP1
operating system, either 32-bit or 64-bit n
Product version Engineering POs Runtime POs
AS and OS AS OS
SIMATIC PCS 7 BOX RTX ES/OS system unlimited 250 250
SIMATIC PCS 7 BOX RTX OS Runtime unlimited 250 250
SIMATIC PCS 7 BOX ES/OS System unlimited 250 250
SIMATIC PCS 7 BOX OS Runtime unlimited – 250
SIMATIC PCS 7 BOX spare part (without licenses, without preinstallation) – – –
9
■
Design (continued)The OS Runtime licenses of the SIMATIC PCS 7 BOX product versions are limited according to the envisaged field of applica-tion to 2 000 POs (process objects). The limit for the
AS Runtime PO is defined by the type of controller. Type-specific limit data can be found in the table "Typical mixed configuration limits" in Section "Automation systems", section "Introduction", in the selection tables of the AS ordering data, and in the SIMATIC PCS 7 AS Single Station and SIMATIC PCS 7 AS Redundancy
Station configurators. The engineering license for AS and OS is always unlimited.
The supplied OS Runtime POs can be extended by cumulative OS Runtime licenses for 100 and 1 000 POs up to the upper limit of 2 000 POs. Analogous to this, SIMATIC PCS 7 BOX product versions with integrated or separate automation functionality of the upper limit of the controller can be expanded by cumulative AS Runtime licenses for 100 and 1 000 POs.
■
Function1) The PROFIBUS routing functionality of WinAC RTX 2010 can only be used with the onboard CP 5622 of the SIMATIC IPC627D (PCS 7 BOX RTX) and CP 5611 of the IPC427C (PCS 7 AS RTX).
2) The PROFIBUS routing functionality of WinAC RTX 2010 can only be used with the onboard PROFINET interfeace (ERTEC 400, corresponds to X1 PN on the System configuration PCS 7 BOX RTX PCS 7 BOX
Integrated WinAC
RTX Controller PCS 7 AS RTX (Micro-box) as separate con-troller
PCS 7 AS mEC RTX as
separate controller Modular AS 41x (AS Single Station) as separate controller
Modular AS 41xH oder AS 41xF (AS Single Sta-tion or AS Redundancy Station) as separate con-troller
Supported functions and limits Software
AS/OS Engineering n n n n n
OS Runtime Single Station up to 2 000 OS runtime POs
n n n n n
PCS 7 APL n n n n n
SIMATIC PDM PCS 7 n n n n n
SIMATIC PCS 7 Mainte-nance Station
n n n n n
SIMATIC BATCH up to 10 units
n n n n
Web-Server, for up to 2 Web Clients
n n n n
OS Single Station Redun-dancy
n n n n
S7 F Systems n
SIMATIC Safety Matrix n
Hardware
Controller (AS) independent of BOX PC system
n n n n
AS-AS Communication n n n n n
Routing n1) n1) n2) n n
PROFIBUS DP/PA n n n n
FOUNDATION Fieldbus (FF) n n
PROFINET IO n n n
Configuration in Run (CiR) n n
High-Precision Time Stamping
n n
S7 Block Privacy n n
Block type change in run (TCiR)
n (AS 410) n (AS 410)
Retentive AS Data only with UPS only with UPS only with UPS AS Configuration Limits3) WinAC RTX 2010
up to 1 200 AS runtime POs
WinAC RTX 2010 up to
1 200 AS runtime POs WinAC RTX 2010 up to
1 200 AS runtime POs Depending on the AS 41x type, up to 2 000 AS runtime POs
Depending on the AS 41xH or AS 41xF type, up to 2 000 AS runtime POs
9
■
Technical specifications SIMATIC PCS 7 BOX basic hardware:SIMATIC IPC627D Standard design Panel front design
Design and equipment features
Design Rack-mountable device with sturdy metal
enclo-sure, suitable for wall and portrait mounting Rack-mounted device with rugged metal enclosure and Panel Front, suitable for mounting in control cabinets, enclosures, consoles and on swivel arms;
max. mounting angle ±20° from the vertical
Degree of protection IP20 Computer unit and rear of panel IP20; panel front
IP65
Processor • Intel Xeon E3-1268L v3, 4 cores, 8 threads, 2.3 (3.3) GHz, GT2, 8 MB cache, Turbo Boost, VT-d, iAMT
• Intel Core i3-4330TE, 2 cores, 4 threads, 2.4 GHz, GT2, 4 MB cache, VT-x
Chipset Intel C226 (DH82C226 PCH)
Main memory
• Type DDR3-1600 SDRAM (PC3-12800) DIMM
• Maximum configuration 16 GB DDR3 SDRAM (2 sockets)
• Standard configuration Alternatives:
• 8 GB DDR3 SDRAM without ECC
• 8 GB DDR3 SDRAM with ECC Graphics
• Graphic controller Onboard Intel graphics controller HD Graphics P4600; 2-D and 3-D engine integrated in processor
• Graphics memory Dynamic Video Memory
(uses up to 512 MB RAM)
• Resolutions, frequencies, colors of the onboard graphics
- DVI 1920 × 1200 at 60 Hz, 24-bit color depth
- Display port 3840 × 2160 at 130 Hz, 30-bit color depth
• Color display (panel front) – 22" TFT display with touch screen
- Resolution (W × H in pixels) – 1920 × 1080
- Luminance (cd/m²), up to – 400
- Horizontal/vertical viewing angle – 170°/170°
- MTBF LED backlight – 80 000 h
Free expansion slots 1 × PCI (185 mm)
1 × PCI Express x16 (185 mm)
RAID controller Intel PCH RAID controller onboard with Intel Rapid Storage Technology Drives
• Hard disk (HDD)/ Solid State Drive (SSD),
alterna-tives • 1 × 3.5" HDD SATA, 250 GB
• 1 × 2.5" SSD SATA, 240 GB
• 320 GB RAID1 (2 × 320 GB HDD SATA, data mirroring)
• Optical drive 1 × Slimline SATA DVD±R/RW
• Floppy disk drive No (can be connected with USB; not included in the scope of delivery) Interfaces
PROFIBUS/MPI, isolated
• Version 1 × 9-pin D-sub socket, CP 5622-compatible
• Transmission rate 9.6 kbps to 12 Mbps
Ethernet 2 × 10/100/1000 Mbps (RJ45), Intel WGI217LM (AMT interface) and Intel WGI210IT USB
• External 4 × USB 2.0 (max. 2 high-current at the same time) 4 × USB 2.0 (max. 2 high-current at the same time) 1 × USB 3.0 high-current on Panel Front
• Internal 1 × USB 3.0 high-current for internal USB stick/dongle
Serial 1 × COM1 (V.24), 9-pin D-sub connector
Parallel –
Graphics connection • 1 × DVI-I (DVI/VGA combined)
• 1 × DisplayPort
Keyboard, mouse Connectable via USB (keyboard and mouse not included in scope of delivery)
9
■
Technical specifications (continued)Operating system and diagnostics software Operating system
• SIMATIC PCS 7 BOX RTX Windows 7 Ultimate SP1 (32-bit), multi-language (English, German, French, Italian, Spanish, Chinese), pre-installed on hard disk and enclosed on restore DVD, no activation required
• SIMATIC PCS 7 BOX Windows 7 Ultimate SP1 (64-bit), multi-language (English, German, French, Italian, Spanish, Chinese), pre-installed on hard disk and enclosed on restore DVD, no activation required
System-tested SIMATIC industrial software SIMATIC IPC DiagMonitor Monitoring and diagnostics functions
Display elements 4 × dual-color LEDs for status display of the operating state:
• PC ON/WD (Watchdog)
• RUN/STOP
• ERROR
• MAINT SIMATIC IPC DiagMonitor diagnostics software
• Temperature (overtemperature/undertemperature) • Processor temperature
• Temperature close to the RAM chips
• Temperature of the basic module
• Battery voltage Backup battery
• Storage media Monitoring of HDD/SSD with S.M.A.R.T. functionality
• Watchdog System monitoring; possible reactions: Hardware or software reset
Fans Monitoring of the fan speed
Operating hours counter Information about the total runtime Safety
Protection class Protection class I according to IEC 61140
Safety directives EN 60950-1; UL60950-1
CAN/CSA C22.2 No 60950-1-07 UL508
CSA C22.2 No. 142
EN 60950-1 UL508
CSA C22.2 No. 142
Noise emission
Operation < 55 dB(A) according to EN ISO 7779
Electromagnetic compatibility (EMC)
Interference emission EN 61000-6-3
EN 61000-6-4 CISPR22 class B FCC class A
EN 61000-6-3 EN 61000-6-4 CISPR22 class A FCC class A Immunity to conducted interference on the supply
lines ±2 kV (according to IEC 61000-4-4; burst)
±1 kV (according to IEC 61000-4-5; symmetrical surge)
±2 kV (according to IEC 61000-4-5; asymmetrical surge) Immunity to interference on signal lines ±1 kV; (according to IEC 61000-4-4; burst; length < 3 m)
±2 kV; (according to IEC 61000-4-4; burst; length > 3 m)
±2 kV; (according to IEC 61000-4-5; surge; length > 30 m) Immunity to static discharge ±6 kV contact discharge (according to IEC 61000-4-2)
±8 kV air discharge (according to IEC 61000-4-2)
Immunity to radio frequency interference 10 V/m, 80 ... 1 000 MHz and 1.4 ... 2 GHz, 80 % AM (according to IEC 61000-4-3) 3 V/m, 2 ... 2.7 GHz, 80 % AM (according to IEC 61000-4-3)
10 V/m, 10 kHz ... 80 MHz, 80 % AM (according to IEC 61000-4-6) Immunity to magnetic fields 100 A/m, 50/60 Hz (according to IEC 61000-4-8)
SIMATIC PCS 7 BOX basic hardware:
SIMATIC IPC627D Standard design Panel front design
9
■
Technical specifications (continued)Climatic conditions
Temperature Tested according to IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14
• Operation • +5 ... +45 °C (with DVD writer only up to +40 °C)
• +5 ... +50 °C (power USB and PCI/PCIe expan-sions max. 20 W)
• +5 ... +55 °C (power USB and PCI/PCIe expan-sions max. 10 W)
• Horizontal, vertical installation: +5 ... +45 °C (with DVD writer, only up to +40 °C)
• Horizontal, angled installation: +5 ... +40 °C (power USB and PCI/PCIe expansions max. 30 W;
no DVD operation)
• Vertical, vertical installation: +5 ... +45 °C (power USB and PCI/PCIe expansions max. 30 W; no DVD operation)
• Operation, with cabinet installation
- External temperature 40 °C – • Internal temperature max. +50 °C (max. power of
all slots 15 W)
- External temperature 45 °C – • Internal temperature max. +45°C with maximum
configuration (power of all slots 30 W)
• Storage/transport -20 ... +60 °C
• Gradient
- Operation Max. 10 °C/h
- Storage 20 °C/h, no condensation
Relative humidity Tested according to IEC 60068-2-78, IEC 60068-2-30
• Operation 5 ... 80 % at 25 °C (no condensation)
• Storage/transport 5 ... 95% at 25 °C (no condensation) Atmospheric pressure
• Operation 1 080 to 795 hPa
(corresponds to an altitude of 1 000 to 2 000 m)
• Storage/transport 1 080 to 660 hPa
(corresponds to an altitude of 1 000 to 3 500 m) Mechanical environmental conditions
Vibrations Tested according to IEC 60068-2-6
• Operation 10 … 58 Hz: 0.075 mm / 58 ... 500 Hz: 9.8 m/s²
- Limitation with DVD writer 10 … 58 Hz: 0.019 mm / 58 ... 500 Hz: 2.5 m/s² - Limitation with portrait assembly 10 … 58 Hz: 0.0375 mm / 58 ... 500 Hz: 4.9 m/s² –
• Storage/transport 5 … 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s²
Shock resistance Tested according to IEC 60068-2-27, IEC 60068-2-29
• Operation 50 m/s², 30 ms
- Limitation with portrait assembly 25 m/s², 30 ms –
• Storage/transport 250 m/s², 6 ms
Standards, specifications, approvals
CE - Residential, business and commercial opera-tions, and small businesses
• Interference emission EN 61000-6-3: 2007 +A1:2011 –
• Noise immunity EN 61000-6-1: 2007 –
CE industrial environment
• Interference emission EN 61000-6-4: 2007 +A1:2011 EN 61000-6-4: 2007
• Noise immunity EN 61000-6-2: 2005 EN 61000-6-2: 2005
Certificates and approvals
Quality assurance system according to
ISO 9001:2008 According to DQS certificate 001323 QM08
cULus Underwriters Laboratories (UL) complying with
stan-dard UL 60950-1, CAN/CSA-C22.2 No. 60950-1 (I.T.E), UL 508 and CAN/CSA-C22.2 No. 142 (IND.CONT.EQ)
Underwriters Laboratories (UL) complying with stan-dard UL 508 and CAN/CSA-C22.2 No. 142 (IND.CONT.EQ)
FCC USA FCC Rules, Part 15, Class A
Canada ICES-003, Class B; NMB-003, Class B ICES-003, Class A; NMB-003, Class A
Australia/New Zealand EN 61000-6-3:2007 EN 61000-6-4:2007
Korea Korean Certification (KC Mark)
Korea Korean Certification (KC Mark)