7 Asset TAGs
SIMATIC PCS 7 AS RTX
With consideration of the scalable automation performance, the SIMATIC PCS 7 AS RTX Microbox automation system represents the starter system in the low to mid-performance range of SIMATIC PCS 7.
• Resistant to vibration and shock as result of:
- Compact and robust design
- Complete absence of fans and rotating storage media
• Maintenance-free 24-hour continuous operation at ambient temperatures up to 55 °C
It is therefore an excellent alternative particularly in small appli-cations to standard automation systems of S7-400 design.
■
ApplicationAs a result of its exceptional physical properties and small dimensions, the SIMATIC PCS 7 AS RTX Microbox automation system is exceptionally suitable for industrial use at plant level.
Possible fields of application:
• Small production applications
• Package units
• Laboratory automation
SIMATIC PCS 7 AS RTX can also be combined with SIMATIC PCS 7 BOX or automation systems of S7-400 design within a plant.
Design of the SIMATIC PCS 7 AS RTX
The SIMATIC PCS 7 AS RTX Microbox automation system is based on a SIMATIC IPC427C with system-specific configura-tion. The following are pre-installed on the 4-GB CompactFlash card also supplied:
• Windows Embedded Standard 2009 operating system
• WinAC RTX 2010 controller software
• SIMATIC IPC DiagMonitor diagnostics software
Microbox automation system with CompactFlash card Cooling slots
All-metal enclosure
Interface inscriptions Displays:
Power Watchdog
DVI-I connection (DVI/VGA combined)
2 x Gigabit Ethernet
PROFIBUS 12 Mbit/s
24 V DC power supply On/Off switch
4 x USB 2.0
COM1
G_PCS7_XX_00160
8
The SIMATIC PCS 7 AS RTX has an integral power supply with electrical isolation. Monitoring functions for parameter assign-ment (program execution/watchdog, processor and board temperatures) as well as enhanced diagnostics/messages (e.g.
operating hours counter, system status) can be recorded via SIMATIC IPC DiagMonitor and SIMATIC PCS 7 Maintenance Station (PCS 7 Asset Management), and evaluated or signaled by LED (Power/Watchdog).
Two Ethernet interfaces 10/100/1000 Mbit/s (RJ45) are inte-grated in the SIMATIC PCS 7 AS RTX for plant bus communica-tion with SIMATIC PCS 7 subsystems such as operator system, engineering system or maintenance station.
ET 200M, ET 200iSP, ET 200S and ET 200pro remote I/O stations can be linked over the integrated PROFIBUS DP interface to a comprehensive range of low-cost signal/function modules as well as intelligent field/process devices on the PROFIBUS PA.
With this CP 5611-compatible interface, the SIMATIC PCS 7 AS RTX also supports routing from the engineering system up to the field devices connected via PROFIBUS.
The SIMATIC PCS 7 AS RTX is configured using the engineering system of the SIMATIC PCS 7 process control system.
The engineering system also administers the AS Runtime licenses of the SIMATIC PCS 7 AS RTX. The scope of delivery of the SIMATIC PCS 7 AS RTX already includes an AS Runtime license for 100 POs. This can be expanded by further
AS Runtime licenses for 100 POs or 1 000 POs up to the limit of 2 000 POs. The process objects of additional AS Runtime licenses are then added to process objects which already exist.
■
Technical specificationsSIMATIC IPC427C (Microbox), SIMATIC PCS 7 AS RTX version Design and equipment features
Design • DIN rail or wall mounting; horizontal
(preferred) or vertical
• Portrait assembly; vertical Degree of protection to EN 60529
(front/rear)
IP20
CPU
• Processor Intel Pentium Core 2 Duo 1.2 GHz
• Front Side Bus 800 MHz
• Second Level Cache 3 MB
Chipset Intel GM45/ICH9M
Main memory 2 GB DDR3-SDRAM SO-DIMM
mod-ules Graphics
• Graphics controller Intel GMA4500 integrated in the chip-set
• Graphics memory 32 ... 256 MB shared memory
• Resolutions, colors, frequencies
- CRT Up to 1920 x 1200, 60 to 120 Hz
- DVI Up to 1920 x 1200, 60 Hz
Drives
• Flash drive For CompactFlash Card, 4 GB
• CD-ROM, DVD-RW, diskette Connectable via USB (not included in scope of delivery)
Interfaces
• PROFIBUS/MPI 1 x 12 Mbit/s (galvanically isolated, CP 5611-compatible), 9-contact Sub-D socket
• Ethernet 2 x Ethernet port (RJ45) Intel 82574L 10/100/1000 Mbps, isolated, two independent controllers, teaming-capable
• USB 4 x USB 2.0/high-speed
• Serial 1 x COM1 RS 232, 115 Kbit/s max.,
9-pin Sub-D connector
• Parallel
-• Graphics connection 1 x DVI-I (DVI/VGA combined)
• DVI: digital
• VGA: Analog
• Keyboard, Mouse Connectable via USB (not included in scope of delivery)
Preinstalled software
Operating system Windows Embedded Standard 2009, preinstalled
Controller software WinAC RTX 2010
Monitoring and diagnostics functions
Watchdog • Monitoring of program execution
• Restart can be configured following faults
• Monitoring time adjustable in the software
Temperature • Processor
• Motherboard
(via SIMATIC IPC DiagMonitor and SIMATIC PCS 7 Maintenance Station) Operating hours counter (via SIMATIC IPC DiagMonitor and
SIMATIC PCS 7 Maintenance Station) Safety
Protection class Protection class I in accordance with IEC 61140
Safety directives EN 60950-1; UL 60950; CAN/
CSA-C22.2 No. 60950-1; UL 508;
CAN/CSA-C22.2 No. 142 or CAN/
CSA-C22.2 No. 14-05 Noise level
Operation < 40 dB (A) to DIN 45635-1
8
1) RAL = Restricted Access Location: Installation of device in operating environment with restricted access, e.g. a locked switchgear cabinet Electromagnetic compatibility
(EMC)
Interference emission EN 61000-6-3 , EN 61000-6-4, CISPR22:2004 Class B; FCC Class A Immunity to conducted interference
on the supply lines
± 2 kV (according to IEC 61000-4-4;
burst)
± 1 kV (according to IEC 61000-4-5;
symmetrical surge)
± 2 kV (according to IEC 61000-4-5;
asymmetrical surge) Immunity to interference on signal
lines
± 1 kV (according to IEC 61000-4-4;
burst; length < 3 m)
± 2 kV (according to IEC 61000-4-4;
burst; length > 3 m)
± 2 kV (according to IEC 61000-4-5;
surge; length > 30 m) Immunity to static discharge ± 6 kV contact discharge
(according to IEC 61000-4-2)
± 8 kV air discharge (according to IEC 61000-4-2) Immunity to high frequency radiation 10 V/m, 80 to 1 000 MHz and
1.4 to 2 GHz, 80% AM (according to IEC 61000-4-3)
1 V/m, 2 to 2.7 GHz, 80% AM (according to IEC 61000-4-3) 10 V, 10 kHz to 80 MHz, 80% AM (according to IEC 61000-4-6) Immunity to magnetic fields 100 A/m rms value 50/60 Hz
accord-ing to IEC 61000-4-8 Climatic conditions
Temperature Tested according to IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14
• in operation with Flash drive - Horizontal mounting (preferred
po-sition)
• Operation with max. 3 expansion modules (max. load 9 W):
0 to +45 °C
• Operation in RAL1) with max. 3 expansion modules (max. load 9 W): 0 to +50 °C
• Operation in RAL1) without expan-sion modules 0 to +55 °C - Vertical / portrait mounting position • Operation without expansion
modules: 0 to +45 °C
• Operation in RAL1) with max. 3 expansion modules (max. load 9 W): 0 to +50 °C - Horizontal mounting position • Operation without expansion
modules: 0 to +40 °C
• Storage/transport -40 to +70 °C
• Gradient Operation: max. 10 °C/h;
storage: 20 °C/h; no condensation Relative humidity Tested according to IEC 60068-2-78,
IEC 60068-2-30
• Operation 5 ... 80% at 25 °C (no condensation)
• Storage/transport 5 ... 95% at 25 °C (no condensation)
Mechanical environmental conditions
Vibrations Tested according to IEC 60068-2-6
• Operation 5 ... 9 Hz: 3.5 mm
9 to 500 Hz: 9.8 m/s²
• Storage/transport 5 ... 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s²
Shock resistance Tested according to IEC 60068-2-27
• Operation 150 m/s², 11 ms
• Storage/transport 250 m/s², 6 ms Standards, specifications,
approvals
Residential, business and commercial operations, and small businesses (CE)
• Interference emission EN 61000-6-3: 2007
• Noise immunity EN 61000-6-1: 2007
Industrial environment (CE)
• Interference emission EN 61000-6-4: 2007
• Noise immunity EN 61000-6-2: 2005
cULus Underwriters Laboratories (UL)
according to Standard UL 60950-1, File E115352 and Canadian National Standard CAN/CSA-C22.2 No. 60950-1 (I.T.E.) or according to UL 508, File E85972 and Canadian National Standard CAN/CSA-C22.2 No. 142 (IND.CONT.EQ.) or accord-ing to Canadian National Standard CAN/CSA-C22.2 No. 14-05 Special features
Quality assurance according to ISO 9001 Power supply (electrically isolated)
Supply voltage 24 V DC (19.2 to 28.8 V) Short-term voltage dip Min. 15 ms (at 20.4 V)
Max. 10 events per hour;
recovery time of at least 1 s Max. current consumption
(at 24 V DC)
4 A
Dimensions and weights
Dimensions (WxHxD) in mm 262 x 142 x 47
Weight approx. 2 kg
8
Portrait assembly kit
SIMATIC PCS 7 AS RTX with portrait assembly kit, interfaces at front The portrait assembly kit allows space-saving installation of the SIMATIC PCS 7 AS RTX in the control cabinet. The technical specifications correspond to those of a SIMATIC PCS 7 AS RTX mounted vertically on a DIN rail.
As a result of the portrait assembly, the mounting area required (WxH in mm) is reduced from 262 x 133 to 62 x 316. Together with the kit, the SIMATIC PCS 7 AS RTX occupies a mounting depth of 163 mm in the control cabinet. Since all interfaces of the SIMATIC PCS 7 AS RTX are accessible from the front, this type of assembly is very convenient for commissioning.
When using the portrait assembly kit for the SIMATIC PCS 7 AS RTX, please also observe the information on operation planning and device installation in the "SIMATIC IPC427C industrial PC"
manual.
SIMATIC PCS 7 AS RTX Assembled and preinstalled auto-mation system on the basis of the SIMATIC IPC427C with Windows Embedded Standard 2009 operat-ing system, WinAC RTX 2010 con-troller software, and SIMATIC IPC DiagMonitor diagnostics software, pre-installed on a 4 GB Compact-Flash card; suitable for SIMATIC PCS 7 V7.1 SP2 or higher and SIMATIC PCS 7 V8.0/V8.1 SIMATIC PCS 7 AS Runtime License for 100 PO
6ES7654-0UE13-0XX0
Additional and expansion components
SIMATIC PCS 7 AS Runtime license
(can be added to existing licenses) Independent of language, floating license for 1 user
• Delivery form package
(without SIMATIC PCS 7 Software Media Package)
License key USB stick, certificate of license
- 100 POs 6ES7653-2BA00-0XB5
- 1 000 POs 6ES7653-2BB00-0XB5
• Delivery form online
(without SIMATIC PCS 7 Software Media Package)
License key download, online certificate of license Note:
E-mail address required!
- 100 POs 6ES7653-2BA00-0XH5
- 1 000 POs 6ES7653-2BB00-0XH5
Portrait assembly Portrait assembly kit
for space-saving installation of the SIMATIC PCS 7 AS RTX (interfaces at front)
6ES7648-1AA20-0YB0
Fieldbus connection PROFIBUS FastConnect bus connector RS 485 Plug 180 With 180° cable outlet, insulation displacement
6GK1500-0FC10
Individual components (included in product package of SIMATIC PCS 7 AS RTX) SIMATIC PC CompactFlash card
• 4 GB 6ES7648-2BF02-0XG0