STCLASS_OK No error
STCLASS_ERROR_SEL
Error of the
CSCWSEL.DLLrespectively
CSCWSEV4.DLLStCode:
20008000 SEL_INVALID_DATA Reason:
Wrong data buffer structure. Application:
Check application program. 20008400 SEL_INVALID_ERROR_CODE
Reason:
A non-interpretable error code was returned. Measure:
Check the hardware connection. 20008405 SEL_CSCCNG_DLL_NOT_FOUND
Reason:
The CSCCNG.DLL could not be found in the LIBPATH (normally <CSCROOT>\DLL). Measure:
Check whether CSCCNG.DLL is in the LIBPATH (normally <CSCROOT>\DLL). 20008407 SEL_THREAD_ERROR
Reason:
The thread for the asynchronous beeping could not be started. Measure:
Special electronics (SEL / SEV4)
20008408 SEL_QUEUE_FULL Reason:
The device handlers queue for the asynchronous beeps is full. Further CscSelSwSignal() commands cannot be processed until the beeping thread has processed one or more beeps. Application:
Do not call CscSelSwSignal too many times too fast. 20008409 SEL_WRONG_READY_IND_SYNCRO
Reason:
Wrong value for READY_IND_SYNCRO in Registry/CSC.INI at [CSCSEL]. Measure:
Check the parameter READY_IND_SYNCRO in file Registry/CSC.INI. 20008410 SEL_ASKIM_START_ERROR
Reason:
Anti Skimming is configured in the registry file but the SEL-DH could not establish a connection to the ASKIM-Hardware.
The ALARM line of the ASKIM Module must be connected to one of the reserve-input ports (RSRVI1 or RSRVI2) of the SEL.
The ALARM_ENABLE line must be connected to one of the reserve output ports (RSRVO1 or RSRVO2) or to a door magnet port (MAGDOOR1, MAGDOOR2 or MAGDOOR3).
Measure:
Check the registry. Assign ANTI_SKIMMING to the SEL ports, the ASKIM module is connected to. 2000A001 SEV4_CSE_DEV_NOT_AVAILABLE
Reason:
The Special Electronic Version 4 (SEV4) may consist of two independent USB devices, the Central Special Electronic (CSE) and a Customer Connection Box (CCB).
The CSE part (Central Special Electronic) of the SEV4 is not available. Application:
Ensure that the selected CSE Port is correct. Measure:
Special electronics (SEL / SEV4)
2000A002 SEV4_CCB_DEV_NOT_AVAILABLE Reason:
The Special Electronic Version 4 (SEV4) may consist of two independent USB devices, the Central Special Electronic (CSE) and a Customer Connection Box (CCB).
The CCB part (Customer Connection Box) of the SEV4 is not available. Application:
Ensure that the selected CCB Port is correct. Measure:
Check key CCB_SUPPORT in the registry section CSCSEV4. 2000A003 SEV4_CSE_PORT_NOT_AVAILABLE
Reason:
The selected CSE-Port of the SEV4 is not available. Application:
Ensure that the selected port is correct. Measure:
Check the configuration of this port in the registry file. 2000A004 SEV4_CCB_PORT_NOT_AVAILABLE
Reason:
The selected port of the customer connection box (CCB) is not available. Application:
Ensure that the selected port is correct. Measure:
Check the configuration of this port in the registry file. 2000A005 SEV4_ILLEGAL_CSE_PORT
Reason:
The selected CSE-Port is not part of the SEV4. Application:
Check the application program. Ensure that the selected port is correct. 2000A006 SEV4_ILLEGAL_CCB_PORT
Reason:
The selected CCB-Port is not part of the SEV4. Application:
Special electronics (SEL / SEV4)
2000A007 SEV4_ILLEGAL_PARAMETER Reason:
The application passed a command to the SEV4 Device Handler with an illegal parameter. Application:
Check the application program. Use the parameter and command structures predefined in SEV4.H. 2000A008 SEV4_ILLEGAL_SOUND_PARA
Reason:
The application tried to initiate a sound output with illegal parameter. Application:
Check the application program. Ensure that only one of the predefined frequencies is used. 2000A009 SEV4_ILLEGAL_MEI_PARA
Reason:
The application tried to switch a Media Entry Indicator (MEI), but the function was called with an illegal parameter.
Application:
Check the application program. Ensure that only one of the predefined flashing frequencies and a valid MEI number is used.
2000A010 SEV4_WRONG_KEY_PARITY Reason:
One of the DES keys loaded into the SEV4 or one of the keys in the EE-PROM (TK) has a wrong parity.
Application:
Check the DES keys transferred to the SEV4 device handler and/or reload the TK. Measure:
Check the hardware.
2000A020 SEV4_INVALID_LCD_CONFIG Reason:
The configuration of an LCD light is not correct. Measure:
Special electronics (SEL / SEV4)
2000A021 SEV4_INVALID_LOGO_CONFIG Reason:
The configuration of a LOGO light is not correct. Measure:
Check the configuration in registry or ini-file. 2000A022 SEV4_INVALID_RESRET_CONFIG
Reason:
The configuration of a Reserve Input is not correct. Measure:
Check the configuration in registry or ini-file. 2000A023 SEV4_INVALID_MEI_CONFIG
Reason:
The application tried to switch the status of a not configured MEI. Application:
Check the application program and the configuration of the selected MEI. Measure:
Check the configuration in regestry- or ini-file. 2000A024 SEV4_INVALID_MEI_FLASHING
Reason:
The application program tried to set more than two MEI ports to flash asynchronous or it used an invalid flash frequency.
Asynchronous flashing is only possible if exactly two MEI's selected. Application:
Check the application program. Ensure that the selected port and all supplied parameters are correct.
Measure:
Special electronics (SEL / SEV4)
2000A030 SEV4_INVALID_DATA Reason:
The response of the SEV4 firmware contained invalid data. Application:
Check the application program. Ensure that the selected port and all supplied parameters are correct.
Measure:
Check the SEV4 hardware. Reload the SEV4 firmware if necessary. 2000A040 SEV4_THREAD_ERROR
Reason:
The SEV4-DH can not execute the internal status thread. Measure:
Report the error log of this entry to Service. 2000A050 SEV4_EVENT_NO_RESOURCE
Reason:
The application performed the command CscSeV4RegisterEvent. The SEV4-DH has resources for max. 64 event user.
Application:
To many threads are registered as event user. Call CscSeV4Deregister to free resources. Measure:
Report the error log of this entry to Service. 2000A051 SEV4_EVENT_INVALID_USER
Reason:
The application called CscSeV4Deregister or CscSeV4WaitForStatusEvent from a not registered thread.
Application:
Check the application program.
The functions CscSeV4RegisterEvent, CscSeV4DeregisterEvent and CscSeV4WaitForStatusEvent must be call from the same thread.
Measure:
Special electronics (SEL / SEV4)
28008020 SEL_INVALID_BLK_ID Reason:
The block ID is not correct (internal error). Measure:
Report the error log of this entry to Service. 28008021 SEL_INVALID_DEV_ID
Reason:
The device ID is not correct (internal error). Measure:
Report the error log of this entry to Service. 28008023 SEL_INVALID_BLK_LEN
Reason:
The length specification is not correct (internal error). Measure:
Report the error log of this entry to Service. 28008025 SEL_TASK_NOT_ENDED
Reason:
A second job was issued without waiting for the response from the first job (internal error). Measure:
Report the error log of this entry to Service. 28008031 SEL_UNKNOWN_REQUEST
Reason:
A command specification which is not known to the special electronics was sent from the SEL device handler to the special electronics (internal error).
Measure:
Report the error log of this entry to Service. 28008032 SEL_INCORRECT_FORMAT
Reason:
A command with incorrect length specifications was sent from device handler SEL to the special electronics (internal error).
Measure:
Special electronics (SEL / SEV4)
28008033 SEL_ILLEGAL_PARAMETER Reason:
A transfer buffer with illegal parameters was transferred from the application to the SEL device handler.
Application:
Check the parameters transferred to the SEL device handler. 28008034 SEL_NO_PROC_REQUEST
Reason:
The device specified in the parameter block is not configured at the moment in the special
electronics. An attempt was made to switch off the monitor with the "CscSelSwMonitor" command, although the monitor switch on the special electronics is set to continuous operation (switch set to the right).
Application:
Check the setup configuration with the "CscSelSetConfig" command. If this configuration is correct, check the command which caused this error.
Measure:
Check whether the monitor switch on the special electronics should be set to continuous operation. If not, set the switch to the left.
28008036 SEL_ERROR_RAM Reason:
Hardware error. Measure:
Check the hardware. 28008037 SEL_EPROM_ERROR
Reason:
An internal hardware error has been found in the self-test of the special electronics. Measure:
Check the hardware. 28008038 SEL_EEPROM_ERROR
Reason:
While executing a command, the special electronics found an error while it was writing to the internal EE-PROM.
Special electronics (SEL / SEV4)
28008040 SEL_ILLEGAL_LED_PARA Reason:
A transfer buffer with illegal parameters was transferred from the application to the SEL device handler for switching the LEDs.
Application:
Check the parameters transferred to the SEL device handler. 28008041 SEL_WRONG_KEY_PARITY
Reason:
One of the DES keys loaded into the SEL or one of the keys in the EE-PROM (TK) has a wrong parity.
Application:
Check the DES keys transferred to the SEL device handler and/or reload the TK. Measure:
Check the hardware.
28008042 SEL_ILLEGAL_SEQUENCE Reason:
One of the keyboard commands was sent in the wrong context. Application:
Check the sequence of the keyboard commands when initiating encryption. 2800A100 SEV4_ERR_NO_CMD_RESPONSE
Reason:
No command response received. The SEV4 firmware did not respond to a "SetPort" command in the desired time.
Application:
Try to repeat the command. Measure:
Special electronics (SEL / SEV4)
2800A101 SEV4_ERR_STILL_BUSY Reason:
The SEV4 firmware did not respond to a "SetPort" command in the desired time. The last received firmware status is DEVICE_BUSY.
Application:
Try to repeat the command. Measure:
Check the SEV4-hardware.
2800A102 SEV4_ERR_COMMAND_NOT_VALID Reason:
An invalid command was sent from device handler SEV4 to the special electronics (internal error). Measure:
SW-Error. Report the error log of this entry to Service. 2800A103 SEV4_ERR_COMMAND_PARA_NOT_VALID
Reason:
A command with incorrect parameter was sent from device handler SEV4 to the special electronics (internal error).
Measure:
SW-Error. Report the error log of this entry to Service. 2800A104 SEV4_ERR_SELF_TEST
Reason:
Firmware error. An error detected during the internal SEV4 self-test. Measure:
Check the SEV4-hardware. 2800A105 SEV4_ERR_WRITE_FLASH
Reason:
While executing a command it was not possible to write into the internal FLASH-PROM (internal firmware error).
Measure:
Special electronics (SEL / SEV4)
2800A106 SEV4_ERR_LOAD_SECURITY Reason:
One of the DES keys loaded into the SEV4 or one of the keys in the EE-PROM (TK) has a wrong parity.
Application:
Check the DES keys transferred to the SEV4 device handler and/or reload the TK. Measure:
Check the hardware.
2800A107 SEV4_ERR_NO_TRANSPORT_KEY_LOADED Reason:
The transport key has not been loaded but the application tried to use one of the key security functions.
Application:
Check the DES keys transferred to the SEV4 device handler and/or reload the TK. Measure:
Check the hardware.
StWarn:
20007FFE SEL_WARN_RESYNC Reason:
The communication to the SEL has been resynchronized after a communication failure. In some cases one or mor keycodes may got be lost.
28007FFF SEL_WARN_RESTART Reason:
The Special Electronics firmware has performed a [re-]start - after power failure or time-out of a delayed reboot (watchdog) - after a firmware loading (loadable firmware from version 0600 on) Measure:
Ignore after normal system boot or firmware loading.
Special electronics (SEL / SEV4)
2800AFFF SEV4_WARN_RESTART Reason:
The SEV4 firmware has performed a [re-]start
- after power failure or time-out of a delayed reboot (watchdog) - after a firmware loading (loadable firmware from version 0600 on) Measure:
Ignore after normal system boot or firmware loading.