v Ascreensaverisinvokedafter 10minutesofinactivityontheOperatorPanel.
TheWebUserInterface(UI)doesnotusea screensaver.TheUser,
Administrativeuser,orServiceuser whoisinactivebetween10and30minutes returnstothelastaccessedscreenwhenactivatingthescreenagain.
v Anylogged inUser,Administrativeuser,orServiceuserwhoisinactivefor morethan30minutesisloggedout.
v Upto10Users and/oroneAdministrativeusercanbelogged inatonetimeon theWebUI. Onlyoneuser(AdministrativeorService)canbelogged inatone timeontheOperatorPanel.OneAdministrativeusercandisconnectanother Administrativeuser.
v Anyuser canbeloggedinto onlyoneinterfaceat atime.
v Whena Serviceuser logsin,allotherUsersandAdministrativeusersare logged outandnotifiedthattheycannotperform actionsonthelibrary.Amessageis postedthatServiceislogged inandnootheruserscanaccessthelibraryuntil afterServicehaslogged out.
Table5-2.AdministrativeUserandUserCommandandAccess. (″X″ifaccessallowed;″–″
ifaccessnotallowed)
MenuCommand AdministrativeUser User
Setup
SetupWizard X —
LogicalLibraries->Create X —
LogicalLibraries->Delete X —
Users->Create X —
Users->Modify X —
CleaningSlots X —
I/OStationSlots X —
DriveIDs X —
Licenses X —
NetworkConfig X —
DateandTime X —
NetworkManagement->SSL, TrapRegistration,SNMP Version
X —
ControlPath X —
Operations
Media->Move X X
Media->Insert X X
Media->Remove X X
CleaningMedia->Insert X X
CleaningMedia->Remove X X
LogicalLibraries->Change Mode
X X
Drive->Load X X
Drive->Unload X X
Drive->ChangeMode X X
I/OStationLock/Unlock X —
SystemShutdown X —
Tools
OperatorInterventions X —
DriveManagement X —
DriveInfo X X
AboutLibrary X X
Service X —
InternalNetwork X —
|
|
|
|
|
Table5-2.AdministrativeUserandUserCommandandAccess (continued). (″X″ifaccess allowed;″–″ifaccessnotallowed)
MenuCommand AdministrativeUser User
SystemSettings X —
Security X —
DisplaySettings X —
Table5-3.WebUserInterfaceMenuCommandsandAccess. (″X″ifaccessallowed;″–″if accessnotallowed)
MenuCommand AdministrativeUser User
MonitorSystem
SystemSummary X X
LibraryMap X —
LoggedInUsers X —
NetworkSettings X —
ManageCartridges
DataCartridges X X
CleaningCartridges X X
I/OStation X X
State(Online/Offline) X X
ControlPaths X —
DriveIDs X X
FibreChannelPorts X X
ManageLibrary
SetupWizard X —
LogicalLibraries X X
CleaningSlots X —
I/OStationSlots X —
Settings
FeatureLicenses X —
Date&Time X X
EmailNotifications X X
OutgoingServer(SMTP) Configuration
X —
ContactInformation X X
Save/RestoreConfiguration X X
ManageAccess
Table5-3.WebUserInterfaceMenuCommandsandAccess (continued). (″X″ifaccess allowed;″–″ifaccessnotallowed)
MenuCommand AdministrativeUser User
Users X —
SetSessionTimeout X —
ServiceLibrary
OperatorInterventions X X
CaptureLibraryLog X X
CaptureDriveLog X X
UpdateLibraryFirmware X —
UpdateDriveFirmware X —
DriveFirmwareLevels X X
Shutdown/RestartLibrary X X
|
|
|
|
|
|
|
Chapter 6. Configuring the Library
“Step1:LogintotheOperatorPanel”onpage6-2
“Step2:AccesstheSetupWizard”onpage6-3
“Step3:EnsurethatallHardwareisInstalled”onpage6-3
“Step4:SetuptheLibraryNetworkConfiguration”onpage6-3
“Step5:EnterLicenseKeys”onpage6-4
“Step6:AssignCleaningCartridgeSlots”onpage6-4
“Step7:AssignI/OStationSlots”onpage6-5
“Step8:AssignLogicalLibraries”onpage6-5
“Step9:SettheDateandTime”onpage6-5
“Step10:InsertCleaningCartridge(s)”onpage6-6
“Step11:PopulateyourLibrarywithDataCartridges”onpage6-6
“Step12:RegisterforMySupport”onpage6-7
Initial configurationcustomizesthelibraryforyour specificneedsand environment.UsetheOperatorPanelSetupWizardtoconfigureyour library.
Details onusingtheSetupWizardinclude:
v Theonlytimethatyoudo notneedtologintothelibraryiswhentheSetup WizardappearsontheOperatorPanelthefirsttimethelibraryisturnedon.
v Aftera timeoutperiodofonehour, theSetupWizard willclose,and youwillbe loggedoutofthelibrary.UsethedefaultAdminaccounttologinonthe
OperatorPanel.
v IfyoutimeoutoftheSetupWizardordonotcompletealltheSetupWizard screens,thelibrarywillapplythedefaultconfigurationsettingspluswhatever modifications(if any)youmade.Thedefaultsettingsare asfollows:
– Network settings:DHCPenabled(IPaddressesaredynamicallyassignedto networkdevicesinyour network.)
– I/OStation slots:6 (inthecontrolmodule) – Cleaningcartridgeslots:1
– Logical libraries:1
v YoucanonlyconfigurenetworksettingsontheOperatorPanel,andyoucannot loginto thelibraryfromthewebinterfaceuntilyouhaveconfigured network settings.
v Youcanalways returntotheSetupWizardwheneveryouarelogged intothe OperatorPanel.
v Anyadministrativeusersyoucreatewillalsobe abletousetheSetupWizardas wellasSetupandOperationsmenucommandstoreconfigurethelibrary.
v Ifnecessary,youcancanceloutoftheSetupWizardontheOperatorPaneland beginusingthelibrarylocallywith thedefaultsettingsinplace. Ifyouaccept thedefaultnetworkconfigurationsettings,youwillnotbe abletoaccessthe
libraryremotelyfromtheWebUserInterface.Youcan,however,return tothe SetupWizardatanytimeand modifynetworkand othersettings.
Important: UsetheAppendixD,“LibraryConfiguration Form,”onpageD-1to recordalllibrarysettings.Atthistime, thereisno wayto
electronicallysaveandrestorelibrarysettings.
Step 1: Log in to the Operator Panel
Ifnecessary, login totheOperator Panel.IftheSetupWizard:Welcomescreen appears, skipthisstep.
On theOperatorPanelLoginscreen:
1. Touch theUsernametextfieldtoaccessthealphanumerickeyboards.
2. Usethealphabetickeyboardtoenteradmin,thentouchOK.
3. Touch thePasswordtextfieldtoaccessthealphanumerickeyboards.
4. Usethealphabetickeyboardtoentersecure,thentouch OK.
5. Touch OKagaintoaccesstheHomePagescreenwhichdisplaysthedefault configurationofthelibrary.
6. Deletethelibrary’sdefaultlogicallibrarysetting.
a. SelectSetup→DeleteLogicalLibraries.and followtheon-screenprompts.
Now youarereadytoconfigureyour libraryusingtheSetupWizard.
a66ug028
Figure6-1.OperatorPanelLoginscreen
|
Step 2: Access the Setup Wizard
Important: Ifatanypointyoutouch CancelwhileintheSetupWizard,theSetup Wizard:Cancelscreenappears.Thescreenisdynamically updatedto indicatewhatthecurrentconfigurationofthelibraryis,includingany settingsthathavebeen appliedthusfarin theWizard.Touching CancelontheCancelscreennavigates youbacktothelastaccessed screenintheSetupWizard.TouchingOKappliesthecurrentsettings andreturnsyoutotheHomePage screen.
1. IftheSetupWizard:Welcomescreendoesnotdisplayautomatically,select Setup→SetupWizard todisplaytheWelcome screen.
2. Afterreadingtheinformationonthescreen,touch Begin.
Step 3: Ensure that all Hardware is Installed
1. ReadtheHardwareInstallationscreen.
2. Ensurethatalltapedrivesandthecustomer-supplied Ethernetcableare installed.
3. Ifthedrivesand Ethernetcableareinstalled,touchNext tocontinue.
Step 4: Set up the Library Network Configuration
Read“ModifyingNetwork Settings”onpage4-1before beginningthisstep.
Important: Youwillnotbeabletoaccessthelibraryremotelyuntil thenetwork settingsareapplied.Library firmwarecanonlybe updatedusingthe remoteWebUserInterface.
Touch Noifyoudo notknowyournetworksettingsandtocontinueconfiguring your library.
Toset upthenetworkconfiguration:
1. Determineyour networksettings(IPAddress,DefaultGateway,and Subnet Mask)and recordthisinformationontheAppendixD,“LibraryConfiguration Form,”onpageD-1.
2. TouchYestobeginconfiguringthelibrarynetwork.
3. Choosea nameforyour library.
4. TouchtheLibraryNametextboxtoaccessthealphanumerickeyboards.
5. Usingthealphanumerickeyboards,enterthenameintotheLibraryName field.
Note: Thelibrarynamecanbea maximumof12alphanumericcharacters.Any lettersusedinthelibrarynamemustbe lowercase.
6. SelectDynamic HostConfigurationProtocol(DHCP)tohavethelibrary networksettingautomaticallyconfigured.Toconfigureyournetworkmanually, enterthefollowingnetworksettings:
v IPAddress-theInternet protocol(IP)addressofthelibrary
v Default Gateway-theIPaddressofthedefaultgatewayforyour portionof theEthernetnetwork
|
Note: EachIPaddressconsistsoffoursetsofnumbers(″octets″) separated byperiods.Donotuse″0″inthelastoctetoftheaddress becauseit willreset theGateway totheoriginaladdressset atthefactory.
v SubnetMask -theIPaddressof thesubnetwork 7. Touch Applytosavethenetworksettings.
8. Afterasuccessfulsave,touch Close.
9. Touch Localtocompleteconfiguringyour libraryusingtheOperatorPanel.
Note: TheSetupWizardisnotavailable fromtheWebUser Interface.
Step 5: Enter License Keys
Read“Applyinga LicenseKey”onpage4-2beforebeginningthis step.
Ifyoupurchaseda ControlPathFailoverLicenseKey(FeatureCode1682which includesControlPathFailoverandData PathFailover)withyour libraryor a CapacityExpansionLicenseKey (FeatureCode1640)with your14Uorlarger library, enterthoselicensekeysnow.
Note: ADataPathFailoverlicensekey(FeatureCode1682)isenteredat thehost.
Refertothedevicedriverdocumentationshippedwithyour libraryand the installationinstructionsshippedwithyour licensekeys formore
information.
Touch Noifyouwould liketocontinueconfiguringyourlibrarywithoutentering a licensekey.
Toentera licensekey:
1. Locate thelicensekeylabels.
2. Touch Yes.
3. Touch theLicenseKey textfieldtoaccessthealphanumerickeyboards.
4. Use thealphanumerickeyboardstoenterthekey.
5. Touch Apply.
6. Touch Closetocontinue.
7. Verifythatyour libraryhasthecorrectnumberoflicensedslotsbyselecting theHomeicon( 1
inFigure5-1onpage5-2)toviewtheHomePage screen.
8. Placea licensekeylabelonthecover platelocatedontherearofthelibraryto therightof theLibrary ControlBlade.
9. PlaceanotherlicensekeylabelontheAppendixD,“LibraryConfiguration Form,”onpageD-1forsafekeeping.
10. Repeatthisprocedureforeachlicensekey.
Step 6: Assign Cleaning Cartridge Slots
Read“CleaningSlotsConfiguration”onpage4-2beforebeginningthisstep.
Onecleaningcartridgeslotisassignedasadefaultinthelibrary.Amaximumof four cleaningcartridgeslotsareallowed inthelibrary.Ifyoudonotwishto assign additional cleaningcartridgeslots,touchNotocontinueconfiguringyour library.
Toassignadditionalcleaningcartridgeslots:
|
|
|
|
|
1. TouchYes.
2. Usingtheupand downarrows,choosethenumberofcleaningslotsyou wouldliketo assigninyour library.
3. TouchNext tocontinue.
Step 7: Assign I/O Station Slots
Read“ConfiguringI/OStations”onpage4-3beforebeginningthisstep.
ThelibraryhassixI/OStationslotsassignedasadefault.IfyoupurchasedaE9U expansionmoduleanda CapacityExpansionlicensekey(FeatureCode 1640),you canassignadditionalI/OStationslots.Upto 12I/OStation slotscanbeassigned ineachE9U expansionmodule.IfyoudonotwishtoassignadditionalI/OStation slots,touch Notocontinueconfiguringyourlibrary.
ToassignadditionalI/OStationslots:
1. TouchYes.
2. Usingtheupand downarrows,choosethenumberofI/OStationslotsyou wouldliketo assigninyour library.
3. TouchNext tocontinue.
Step 8: Assign Logical Libraries
Read“WorkingwithLogical Libraries”onpage4-4beforebeginningthis step.
Thelibraryhasonelogicallibraryconfiguredasadefault.Themaximumnumber of logicallibrariesthatcanbe configuredisequal tothenumberofdrivesinstalled inthelibrary.
Ifyoudonotwishtocreateadditionallibraries,touchNotocontinueconfiguring your library.
Tocreateadditionallogicallibraries:
1. TouchYestochange thenumber oflogicallibrariesin yourlibrary.
2. Usingtheupand downarrows,choosethenumberoflogicallibrariesyou wishtosetupinyour library.
3. TouchNext tocontinue.
4. Modifythelibrarynamesthatappearbytouchingthetextbox,andusingthe alphanumerickeyboardstotypeina name.
5. TouchNext tocontinue.
6. Verifythatthenumberofcleaningslots,I/OStationslots,andlogicallibraries creatediscorrect.
7. TouchApply tosavethesettingsandexittheSetupWizard.
Step 9: Set the Date and Time
1. Enterthecurrentdateand timebytouchingeachsquareandenteringthe currentvalue.
Note: Thelibraryclockisona24-hourcycle.Forexample,4:00pm wouldbe enteredas16(HH)and00(MM).Clockmanagement mayrequireyour toresetthetime.
|
|
|
|
2. Touch Applytosavethedateandtimesettingsandtocontinue.
3. Touch Closetocontinue.
Step 10: Insert Cleaning Cartridge(s)
Read“UnderstandingCartridgeAssignmentintheLibrary”onpage4-1before beginningthis step.
1. PlaceacleaningcartridgeintheI/OStation.
2. Touch Systemtoassignthecleaningcartridgetotheentirelibrarysystemand nottoaspecific logicallibrary.
3. SelectOperations →InsertingCleaning Media.
4. Selectthedesigneddestinationslotforthecleaningcartridge.
5. Touch OK.
6. Repeatthisprocedureforeachcleaningcartridge.
Step 11: Populate your Library with Data Cartridges
Read“UnderstandingCartridgeAssignmentintheLibrary”onpage4-1before beginningthis step.
Two methodsareavailableforpopulating yourlibrarywithdatacartridges:
v Bulkloading
v Importingvia theI/OStation
Only bulkloadcartridgesintoyourlibraryifthefollowingcriteriaismet:
v ifyourlogicallibraryislicensedforfullcapacity v ifyouare loadingblankcartridges
v ifcleaningslotshavebeenassignedandholdcleaningcartridges
Note: Donotbulkload cartridgesintothebottomtworowsofthelibrary.Also,if yourlibraryis23Uorlarger,donotbulkloadcartridgesintothetopslotof column4 orcolumn5.Thesestorage slotsarenotaccessiblebytherobot duetomechanicallimitations.
Storageslotsare notassignedconsecutivelyina logicallibrary.Toensurethatyour cartridges getplacedinthecorrectlogicallibrary,importyour datacartridgesvia theI/OStationfollowingtheprocedurebelow.
1. Determinethenumberofavailable storageslotsineachlogicallibraryby referringtotheLibraryMapontheWebUserInterface(MonitorSystem→ LibraryMap).
2. Using therightand leftarrowsnearthetopofthescreen,scrollbetweenlogical librariesand makenoteofthenumberofstorageslotsassignedtoeachlogical library.
3. LoadtheI/OStationwithdatacartridges.
4. Choosethelogicallibrarytowhichthese cartridgesaretobeassigned.
5. SelectOperations →InsertMedia.
6. Repeatthisprocedureuntilalldatacartridgeshavebeenimportedintothe library.
|
|
|
|
|
|
|
|
|
|
|
Step 12: Register for My Support
My SupportregistrationprovidesemailnotificationfromIBM whennewfirmware levelshavebeenupdatedand areavailablefordownloadandinstallationaswell asotherinformationaboutyourlibrary.
ToregisterforMy Support:
v Visitthewebat https://www-1.ibm.com/support/mysupport/us/en/.
v Enteryour usernameandpasswordontheAppendixD, “LibraryConfiguration Form,”onpageD-1.
IBM recommendsthatyouupdatelibraryanddrivefirmwarewhennew levels becomeavailable.
v Forinstructiononupdatinglibraryand drivefirmware,see“UpdatingLibrary Firmware”onpage7-10 and“UpdatingDrive Firmware”onpage7-11.
Nowyouarereadytouseyourlibrary.
Chapter 7. Operating Procedures
Library/Logical Libraries
“ViewingSystemInformation”onpage7-2
“AccessingtheSetupWizard”onpage7-2
“CreatingLogicalLibraries”onpage7-3
“Deleting/ModifyingaLogicalLibrary”onpage7-3
“AssigningCleaningSlots”onpage7-3
“AssigningI/OStationSlots”onpage7-4
“EnteringLicenseKeys”onpage7-4
“CreatingUsersAccounts”onpage7-4
“SettingtheDateandTime”onpage7-5
“SettingUpEmailNotifications”onpage7-5
“ManagingtheNetwork(SSL,TrapRegistration,andSNMPVersion)”onpage7-6
“ResettingtheLibraryControlBladeIPAddress”onpage7-5
“ConfiguringtheLibraryforRemoteAccess”onpage7-7
“ManagingtheNetwork(SSL,TrapRegistration,andSNMPVersion)”onpage7-6
“TakingaLogicalLibraryOffline/Online”onpage7-7
“ShuttingDown/RestartingtheLibrary”onpage7-8
“ViewingErrorMessages”onpage7-9
“CapturingaLibrarySnapshot”onpage7-9
“ViewingLibraryInformation”onpage7-9
“Locking/UnlockingtheI/OStation”onpage7-10 FirmwareUpgrades “UpdatingLibraryFirmware”onpage7-10
“UpdatingDriveFirmware”onpage7-11
“UsingtheITDTSCSIFirmwareUpdate,DumpRetrievalandDriveTestTool”onpage 7-11
Drives “ViewingDriveInformation”onpage7-13
“LoadingaDrive”onpage7-14
“UnloadingaDrive”onpage7-14
“TakingaDriveOffline/Online”onpage7-14
“AddingaControlPathDrivetoaLogicalLibrary”onpage7-14
“AssigningDriveIDs”onpage7-14
“ModifyingaFibreChannelDrivePortSetting”onpage7-15 Cartridges “InsertingDataCartridges”onpage7-15
“RemovingaDataCartridge”onpage7-16
“MovingDataCartridges”onpage7-16
“InsertingaCleaningCartridge”onpage7-16
“RemovingaCleaningCartridge”onpage7-17
|