• No results found

Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties

N/A
N/A
Protected

Academic year: 2019

Share "Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Figure

Fig. 1 Scanning electron micrographs of aluminium particles of a Goodfellow aluminium powder with mean particle size of 15 μm, b Goodfellow aluminium powder with mean particle size of 19 μm, c East Coast Fibreglass aluminium powder with mean particle size of 35 μm and with mixed morphology; size distributoins of d the 15 μm mean powder particle size, e the 19 μm mean powder
Fig. 3. The nominal melting point for pure aluminium is 660.3 °C but this value is influenced by many factors, including the
Fig. 2 a Picture of compaction mould and b schematic of produced specimen dimensions (mm)
Fig. 3 Differential readings against the temperature of the aluminium powders
+4

References

Related documents

O presente estudo teve como objetivo caracterizar a regeneração natural de espécies arbóreas nativas no sub-bosque de uma área com Eucalyptus saligna Sm., considerando-se

She worked at the West Park Healthcare Centre, where ill staff from Scarborough Grace Hospital were brought into a SARS unit established especially to cope with the outbreak...

Background: Long-non-coding RNAs (lncRNAs), RNA molecules longer than 200 nucleotides, have been involved in several biological processes and in a growing number

Experimented at different thermal loads with two different PCMs (Water and Eutectic solution (90% H2O + 10% NaCl) of melting point 0°C and -5°C respectively) which shows the

Weighted Page Content Rank Algorithm (WPCR) is a proposed page ranking algorithm which is used to give a sorted order to the web pages returned by a search engine in response

To control for possible flow-through and passive uptake of dye, a control of PKH without exosomes was included, and added at the same volume as exosomes (PKH control/Ct).

available information and sort it so that we would be able to assign metrics to each project.. The process of locating data took the majority of our time during the project. Data