SolidCAM Getting Started

(1)

The complete integrated machining system

SolidCAM+SolidWorks

www.sodcam.com

Powe ad Ease of Use - the w combato

SolidCAM 2007

Getting started

www.cadfamily.com EMail:[email protected]

The document is for study only,if tort to your rights,please inform us,we

(2)



www.cadfamily.com EMail:[email protected]

The document is for study only,if tort to your rights,please inform us,we

(3)



www.sodcam.com

www.cadfamily.com EMail:[email protected]

The document is for study only,if tort to your rights,please inform us,we

(4)



SodCAM

2007

4

4 2.5D

2.5D

Milling

10

10 3D

3D

Milling

14

14 HigH

HigH

SPEED

MACHining

18

18 MUl

MUl

Ti-SiD

ED

MACHin

ing

22

22 SiM.

SiM.

5-AxiS

MACHining

26

26 TUrning

30 TUrning

30 TUrn-Mill

34 TUrn-Mill

34 WirE

WirE

CUT

42

42 TrAini

TrAini

ng

MA

TEriAlS

44

44 SySTEM

SySTEM

rEqUirEMEnTS

45

45 www.cadfamily.com EMail:[email protected]

www.cadfamily.com EMail:[email protected]

The document is for study only,if tort to your rights,please inform us,we

(5)



•

• Don’t go or less. Go or Gold.Don’t go or less. Go or Gold.

SolidCAM is the de-facto standard Gold-Certied integ

SolidCAM is the de-facto standard Gold-Certied integrated CAM-Enginerated CAM-Engine

for SolidW

for SolidWorks. SolidCAM provides seamless, single-window integorks. SolidCAM provides seamless, single-window integration andration and

full associativity to the

full associativity to the SolidWSolidWorks design model. orks design model. All machining operationsAll machining operations

are dened, calculated and veried, without leaving the SolidWorks

window.

SolidCAM is widely used in the mechanical manufacturing, electronics,

medical, consumer products, machine design, automotive and aerospace

industries, as we

industries, as well as in mold and ll as in mold and die and rapid prototyping shops.die and rapid prototyping shops.

Today successful manufacturing companies are using integrated CAD/

CAM systems to get to market faster and reduce costs. With SolidCAM’s

seamless single-window integration in SolidWorks, any size organization

can reap the benets of

can reap the benets of the integrated SolidWthe integrated SolidWorks and SolidCAMorks and SolidCAM

solution. SolidWorks + SolidCAM is the Dream-Team for design and

Manufacturing.

SolidCAM supports the complete set of

SolidCAM supports the complete set of manufacturing technologiesmanufacturing technologies..

Follo

Following is a brief wing is a brief description of description of the main SolidCAM modulesthe main SolidCAM modules..

SodCAM 2007

www.cadfamily.com EMail:[email protected]

The document is for study only,if tort to your rights,please inform us,we

(6)



• .D Milling

SolidCAM provides both interactive and automated powerful 2.5D milling operations on SolidWorks models. SolidCAM offers one of the best pocketing algorithms in the market. Full tool path control and powerful algorithms ensure that the user can manufacture the way he needs to. Operations can be easily re-ordered, rotated, mirrored, etc. SolidCAM’s automatic feature-recognition and machining module automates the manufacturing of parts with multiple drills and complex holes.

All your needs for successful production machining are provided directly inside SolidWorks with an easy and straightforward interface. SolidCAM is successfully used in production environments by thousands of manufacturing

companies and job shops.

• D Milling

SolidCAM’s 3D Milling can be used both for prismatic parts and for complex 3D models. For prismatic parts SolidCAM analyzes the model and automatically recognizes pockets and proles to be machined using Z-constant machining strategies. For complex 3D models, SolidCAM offers powerful 3D machining, including integrated rest material options.

www.cadfamily.com EMail:[email protected]

(7)



• + Axis Multi-Sided Machining

With SolidCAM, programming and machining of multi-sided parts on 4-and 5-Axis machining centers is efcient 4-and protable. SolidCAM is an industry leader in this type of machining. SolidCAM rotates the SolidWorks model to the user-dened machining planes and automatically calculates all necessary shifts and tilts for the 3D machining coordinate systems.

SolidCAM enables exible set-ups and reduces the need for special clamping jigs. You can dene your 2.5D and 3D machining operations on any face and check them using SolidCAM’s advanced tool path verication. The output is ready-to-run programs for your 4/5-axis CNC-machine.

• Simultaneous -Axis Machining

Simultaneous 5-axis machining is becoming more and more popular due to the need for reduced machining times, better surface nish and improved life span of tools. SolidCAM utilizes all the advantages of Simultaneous 5- Axis machining and together with collision control and machine simulation,

provides a solid base for your 5-axis solution.

www.cadfamily.com EMail:[email protected]

(8)



SolidCAM provides intelligent and powerful 5-axis machining strategies, including swarng and trimming, for machining of complex geometry parts including mold cores and cavities, aerospace parts, cutting tools, cylinder

heads, turbine blades and impellers. SolidCAM provides a realistic simulation

of the complete machine tool, enabling collision checking between the tool

and the machine components.

• High Speed Machining (HSM) Module

SolidCAM HSM is a very powerful and market-proven high-speed-machining module (HSM) for molds, tools and dies and complex 3D parts. The HSM module offers unique machining and linking strategies for generating

high-speed toolpaths.

SolidCAM’s HSM module smooths the paths of both cutting moves and retracts wherever possible to maintain a continuous machine tool motion– an essential requirement for maintaining higher feedrates and eliminating dwelling.

With SolidCAM HSM module, retracts to high Z levels are kept to a minimum. Angled where possible, smoothed by arcs, retracts do not go any higher than necessary – thus minimizing aircutting and reducing machining

time.

Any HSM 3D machining strategy can be controlled by specifying the surface slope-angle to be machined or by specifying the machining

boundary. SolidCAM HSM module provides a comprehensive set of

boundary creation tools, including Silhouette boundaries, Cutter Contact Area boundaries, Shallow boundaries, Theoretical Rest Area boundaries,

Rest Area boundaries and User-dened boundaries.

SolidCAM HSM module is a powerful solution for all users who demand advanced high speed machining capabilities. It can also be used to improve the productivity of older CNC’s with reduced air-cutting and smoothing

arcs that maintain continuous machine tool motion.

www.cadfamily.com EMail:[email protected]

(9)



The result of HSM is an efcient, smooth, and gouge-free tool path. This translates to increased surface quality, less wear on your cutters, and a longer

life for your machine tools.

With demands for ever-shorter lead and production times, lower costs and improved quality, High Speed Machining (HSM) is a must in today’s

machine shops.

• Turning and Turn-Mill

SolidCAM has a very strong capability in turning, grooving and Turn-Mill. As in milling, a rest-machining capability is built in all turning operations. SolidCAM supports all machine turning cycles. SolidCAM provides special support for the advanced machining technologies of ISCAR’s Turn-Groove

tools.

www.cadfamily.com EMail:[email protected]

(10)



A powerful integrated Turn-Mill capability enables the turning and milling operations to be programmed in the same environment. Access to the complete 2.5-5 axis milling is available. SolidCAM provides support for up to 5-Axis (XYZCB) Turn-Mill CNC machines including back-spindle

operations.

• / Axis Wire-EDM

SolidCAM Wire EDM handles proles and tapers with constant and variable angles, as well as 4-axis contours. SolidCAM’s intelligent algorithms prevent the falling of material pieces by automatic pocket processing. SolidCAM provides full user control of stop-points and of wire cutting conditions at any point of the prole or taper.

www.cadfamily.com EMail:[email protected]

(11)

10 2.5D Milling

The _D_Milling_1.prz_{example illustrates the use of SolidCAM 2.5D Milling to machine}

the cover part shown above. The machining is performed on a 3-axis CNC machine in two setups, one for the top faces and one for bottom faces.

The following SolidCAM operations are created to perform the machining:

• Top ace machining (P_prole_T1)

This Pocket operation performs the machining of the top face of the cover. An end mill of Ø20 is used. The machining is performed in two passes -rough and nish. A machining allowance of 0.2 mm remains unmachined at the oor, after the rough pass, and is removed during the nishing pass.

• External aces machining (F_prole1_T; F_prole_T)

These operations perform the prole machining of the external contour of

the cover. An end mill of Ø16 is used. The Clear oset _{option is used at the}

roughing stage to perform the machining in a number of equidistant offsets from the machining geometry. The machining allowance is left unmachined during the roughing operation and removed at the nishing stage.

• Bolt seats machining (F_prole_T)

This operation is used to remove the material at the bolt seat areas. An end mill of Ø8 is used for the operation.

www.cadfamily.com EMail:[email protected]

(12)

11

• Bottom ace machining (P_prole_T1)

This Pocket operation performs the machining of the bottom face of the

cover. This operation uses the second Coordinate system; it means that

the second setup has to be performed at the CNC machine before the machining. The used tool and the machining strategy are similar to the

P_prole_T1 _operation.

• Internal aces roughing (P_prole_T; P_prole_T)

These Pocket operations perform the rough machining of the internal faces of the cover. An end mill of Ø16 is used. The rough machining is divided into two operations to perform the machining with the optimal tool path The machining allowance is left unmachined for further nish operations.

• Internal aces rest machining (P_prole_T)

This operation uses the rest material machining technique in order to machine the areas left inaccessible for the large tools used in the previous

operations. An end mill of smaller diameter (Ø8) is used.

• Internal aces nishing (F_prole_T; F_prole_T)

These operations perform the wall nishing of the internal pocket area of

the cover part. An end mill of Ø6 is used.

• Floor aces nishing (F_prole_T; P_prole_T_1)

These operations perform the oor nishing of the internal pocket area of the cover part. End mill tools of Ø6 and Ø8 are used.

• Slot machining (S_slot_T)

This Slot Milling operation performs the machining of the groove at the bottom face of the cover. An end mill of Ø1.5 is used.

• Holes machining D_drill_T; D_drill_T

These Drill operations perform the сenter drilling and drilling of the four holes of Ø5 located at the bottom face of the cover.

• Threaded holes machining (D_drill1_T; D_drill1_T; D_drill1_T)

These Drill operations perform the сenter drilling, drilling and threading of the M2 holes located at the pads.

For more information see Exercise # of the SolidCAM .D Milling Training Course.

www.cadfamily.com EMail:[email protected]

(13)

1

2.5D Milling

The _D_Milling_.prz_{example illustrates the use of SolidCAM 2.5D Milling to machine}

the part shown above. The machining is performed on a 3-axis CNC machine in two setups, using two SolidCAM Coordinate systems.

• Upper aces machining (F_prole_T1; F_prole1_T1)

These Prole operations remove the bulk of material performing the rough and the nish machining of upper faces. An end mill of Ø16 is used. The

Clear oset option is used at the roughing stage to perform the machining

in a number of equidistant offsets from the machining geometry.

• Step aces machining (F_prole_T1)

This operation performs the rough and nish machining of the step faces using the Prole operation. An end mill of Ø16 is used.

• External contour machining (F_prole_T1)

This operation performs the rough and nish machining of the external

model faces. An end mill of Ø16 is used.

www.cadfamily.com EMail:[email protected]

(14)

1

• Connector pocket machining (P_prole_T1; P_prole_T; F_prole1_T; F_prole_T; P_prole_T

A number of Prole and Pocket operations are used to perform the rough and nish machining of the connector pocket. End mill tools of Ø10; Ø3 and Ø4 are used. The Rest material strategy is used in the last operation to complete the machining of the connector faces.

• Machine screw head areas (F_prole_T)

This operation performs the rough and nish machining of the screw head areas. An end mill tool of Ø4 is used.

• Top and Bottom ace machining (P_prole1_T1; P_prole10_T1)

Two Pocket operation using the Clear _{strategy enable you generate the tool}

path for roughing and nishing of the top and bottom faces. Note that the second operation is used with the second Coordinate System, it means that the second setup has to be performed at the CNC machine before the machining.

• Internal aces roughing (P_prole11_T1; P_prole1_T1)

These Pocket operations perform the roughing of the complex pocket formed by the internal faces of the part. An end mill tool of Ø10 is used.

• Internal aces roughing (F_prole11_T; F_prole1_T; P_prole_T; F_prole_T)

These Pocket and Prole operations perform the nish machining of the wall and oor faces if the complex pocket roughed at the previous stage. An

end mill tool of Ø4 is used.

• Holes machining (D_drill_T; D_drill1_T; D_drill_T; D_drill_T; D_drill1_T; D_drill_T;

These Drill operations perform center drilling and drilling of holes located

on the cover part faces.

For more information see Exercise # of the SolidCAM .D Milling Training Course.

www.cadfamily.com EMail:[email protected]

(15)

1

3D Milling

The D_Milling_1.prz _{example illustrates the use of SolidCAM 3D Milling for the}

machining of the mold core shown above.

• Roughing (DR_target_T1)

This operation removes the bulk of material using theContour _roughing

strategy. An end mill of Ø20 is used. The machining is performed at the constant-Z levels dened, using the Step down value of 5 mm. A machining

allowance of 0.5 mm remain unmachined for further nish operations.

• Rest material machining (DR_target_T)

This operation performs the rest material machining of the areas that were inaccessible to the tool in the previous operation. An end mill tool of

smaller diameter (Ø16) is used. The Contour roughing strategy is utilized

in combination with the Rest material _{mode of the} Working area _denition

in order to obtain optimal and effective tool path removing the cusps left after the previous operation. A machining allowance of 0.5 mm remains unmachined for further nish operations.

www.cadfamily.com EMail:[email protected]

(16)

1

• Steep areas nishing (DF_CZ_target_T)

This operation performs the Constant-Z nishing of the steep areas of the core. With this strategy, SolidCAM machines a number of planar sections, parallel to the XY plane, using prole machining. A ball nose mill of Ø10 is used. The machining is performed for the steep areas, with inclination angle from 30° to 90°

• Shallow areas nishing (DF_CS_target_T)

This operation performs the Constant Stepover _{nishing of the shallow areas}

of the core. With this 3D Milling strategy SolidCAM generates a number of tool paths, at specied constant offset ( Step over_{) from each other, measured}

along the surface. The machining is performed for the shallow areas, with inclination angle from 0° to 32°. A ball nose mill of Ø10 is used.

• Parting surace nishing (DF_Lin_target_T)

This operation performs the Linear nishing of the parting surface of the

core. In linear nishing, SolidCAM generates a line pattern on a 2D plane above the model and then projects it on the 3D Model. The Step over

value determines the constant distance between adjacent lines of the linear pattern, created on the 2D plane before being projected. A ball nose mill of Ø10 is used. The dened Drive/Check surfaces enable you to perform the machining of the parting surfaces only, avoiding unnecessary contact with

the already machined faces.

For more information see Exercise #1 _andExercise #10 _{of the}SolidCAM D Milling Training Course_.

www.cadfamily.com EMail:[email protected]

(17)

1

3D Milling

The D_Milling_.prz _{example illustrates the use of SolidCAM 3D Milling for prismatic}

part machining.

• Roughing (DR_target_T1)

These operations remove the bulk of material using the Contour _roughing

strategy. An end mill of Ø14 is used. The Open Pocket machining is used

to perform the approach movement from an automatically calculated point outside of the material. The tool descends to the necessary depth outside

of the material and then moves horizontally into the material. A machining allowance of 0.2 mm remain unmachined on oor and wall faces for further nish operations.

• Rest material machining (DR_target_T; DR_target_T)

At this stage the rest material machining is performed for the corner areas, that were inaccessible by the tool in the previous operation. The machining is performed in two operations using end mills of Ø8 and Ø5, in order to minimize the tool load. The Contour _{roughing strategy is utilized in}

combination with the Rest material option in order to obtain optimal tool

path A machining allowance of 0.2 mm remain unmachined on the oor and wall faces for further nish operations.

www.cadfamily.com EMail:[email protected]

(18)

1

• Vertical walls nishing (DF_CZ_target_T)

This operation performs the Constant-Z Wall nishing of the vertical walls

areas of the part. With this strategy, SolidCAM generates a number of prole passes along the Z-axis, with a constant Step down. An end mill of

Ø4 is used.

• Horizontal foor nishing (DF_CZ_target_T_1)

This operation performs the Constant-Z Floor nishing of the horizontal

oor areas of the part. With this strategy, SolidCAM generates a number of pocket passes on the horizontal faces, parallel to the XY-plane of the current Coordinate System. An end mill of Ø4 is used.

For more information see Exercise #1 of the SolidCAM D Milling Training Course.

www.cadfamily.com EMail:[email protected]

(19)

1

HigH SPEED MACHining

The hsm_1.prz _{example illustrates the use of several SolidCAM High Speed Machining}

(HSM) strategies to machine the mold cavity shown above.

• Rough machining (HSM_R_Cont_target_T1A)

This operation performs contour roughing of the cavity. An end mill of Ø20 is used with a Step down of 3 mm. A machining allowance of 0.5 mm remain unmachined for further semi-nish and nish operations.

• Rest roughing (HSM_RestR_target_TA)

This operation performs rest roughing of the cavity. A bull nosed tool of Ø12 and corner radius of 2 mm is used with a Step down of 1.5 mm to remove the steps left after the roughing. The same machining allowance as in roughing operation is used.

• Steep aces semi-nishing (HSM_CZ_target_TA)

This operation performs Constant Z semi-nishing of the steep faces (from 40° to 90°). A ball nosed tool of Ø10 is used for the operation. A machining allowance of 0.25 mm remain unmachined for further nish operations.

The Apply llet suraces option is used to add virtual llets that will smooth

the tool path at the corners.

www.cadfamily.com EMail:[email protected]

(20)

1

• Shallow aces semi-nishing (HSM_Lin_target_TA)

This operation performs Linear semi-nishing of the shallow faces (from 0° to 42°). A ball nosed tool of Ø10 is used for the operation. A machining allowance of 0.25 mm remain unmachined for further nish operations.

The Apply llet suraces option is used.

• Corners rest machining (HSM_RM_target_TA)

This operation uses the Rest Machining strategy for semi-nishing of the mold cavity corners. The semi-nishing of the model corners enables you to avoid tool overload in the corner areas during further nishing. A ball

nosed tool of Ø6 is used for the operation. A virtual reference tool of

Ø12 is used to determine the model corners where the rest machining is performed. A machining allowance of 0.25 mm remain unmachined for further nish operations.

• Steep aces nishing (HSM_CZ_target_TA)

This operation performs Constant Z nishing of the steep faces (from 40° to 90°). A ball nosed tool of Ø8 is used for the operation. The Apply llet suraces option is used.

• Shallow aces nishing (HSM_Lin_target_TA)

This operation performs Linear nishing of the shallow faces (from 0° to 42°). A ball nosed tool of Ø8 is used for the operation. The Apply llet suraces _{option is used.}

• Corners rest machining (HSM_RM_target_TA)

This operation uses the Rest Machining strategy for nishing of the model corners. A ball nosed tool of Ø4 is used for the operation. A virtual reference tool of Ø10 is used to determine the model corners where the rest machining is performed.

• Chamering (HSM_Bound_target_TA)

This operation uses the Boundary Machining strategy for the chamfering of upper model edges. A taper tool is used for the operation. The chamfer is dened by the external offset of the drive boundary and by

the Axial thickness parameter.

For more information see Exercise #1 _{of the} SolidCAM HSM User Guide_.

www.cadfamily.com EMail:[email protected]

(21)

0

HigH SPEED MACHining

The hsm_.prz _{example illustrates the use of several SolidCAM HSM strategies to}

machine the electronic box shown above.

• Rough machining (HSM_R_Cont_target1_T1A)

This operation performs the contour roughing of the part. An end mill of Ø30 is used with a Step down of 10 mm to perform the roughing. A machining allowance of 0.5 mm remain unmachined for further semi-nish and nish operations.

• Rest roughing (HSM_RestR_target1_TA)

This operation performs the rest roughing of the part. A bull nosed tool of Ø16 and corner radius of 1 mm is used with a Step down of 5 mm to remove the steps left after the roughing. The same machining allowance as in the roughing operation is used.

• Upper aces machining (HSM_CZ_target_TA)

This operation performs Constant Z nishing of the upper vertical model faces upto a certain depth. A bull nosed tool of Ø12 and corner radius of 0.5 mm is used.

www.cadfamily.com EMail:[email protected]

(22)

1

• Bottom aces machining (HSM_CZ_target_TA_1)

This operation performs Constant Z nishing of the bottom vertical model faces. A bull nosed tool of Ø12 and corner radius of 0.5 mm is used.

• Flat aces machining (HSM_CZF_target1_TA)

This operation performs Horizontal Machining of the at faces. A bull nosed tool of Ø12 and corner radius of 0.5 mm is used.

• Inclined aces machining (HSM_CZ_target1_TA)

This operation performs Constant Z Machining of the inclined faces. A taper mill of 12° angle is used to perform the machining of the inclined face with large stepdown (10 mm). Using such a tool enables you to increase the

productivity of the operation.

For more information see Exercise #1 _{of the} SolidCAM HSM User Guide_.

www.cadfamily.com EMail:[email protected]

(23)



MUlTi-SiDED MACHining

The multi_sided_machining_1.prz _{example illustrates the use of SolidCAM Multi-sided}

machining to machine the manifold plate shown above, using a 5-axis CNC Machine. The initial stock for this example comes from casting.

• Top ace machining (P_prole_T1)

This Pocket operation, using the Clear strategy, performs the machining of

the top face of the cover. An end mill of Ø16 is used. The machining is performed in two passes - rough and nish. A machining allowance of 0.2 mm remain unmachined at the oor after the rough pass and removed during the nishing pass. Position #1 of the Machine Coordinate system is

used for the operation.

• Front hole machining (D_drill_T; D_drill_T; D_drill_T; F_prole1_T1)

These operations are used for the front hole machining using Position #2 of the Machine Coordinate system. The Drill operations perform center-drilling and two steps center-drilling of the hole. The Prole operation is used for the machining of the connector faces around the hole.

www.cadfamily.com EMail:[email protected]

(24)



• Let hole machining (D_drill1_T; D_drill1_T; D_drill1_T; F_prole_T1)

These operations are used for the left hole machining using Position #3 of the Machine Coordinate system. The sequence of the Drill and Prole operations is similar to the sequence used for the front hole machining.

• Back hole machining (D_drill_T; D_drill_T; D_drill_T; F_prole_T1)

• Right hole machining (D_drill_T; D_drill_T; D_drill_T; F_prole_T1)

• Top holes machining (P_prole_T; D_drill_T; D_drill_T; D_drill_T; D_drill_T; D_drill_T; F_prole_T)

These operations are used for the machining of the holes located on the top faces of the model. Position #1 of the Machine Coordinate system is used

for all the operations.

For more information see Exercise #1 _{of the} SolidCAM .D Milling Training Course_.

www.cadfamily.com EMail:[email protected]

(25)



MUlTi-SiDED MACHining

The multi_sided_machining_1.prz _{example illustrates the use of SolidCAM Multi-sided}

machining to complete the machining of the clamp part shown above, using a 5-axis CNC Machine.

• Top ace machining (P_prole1_T1)

This Pocket operation, using the Clear strategy, machines the top inclined

face of the clamp. Machine Coordinate system #1 (Position #2) is used for

the operation.

• Back ace machining (P_prole_T1)

This Pocket operation, using the Clear strategy, machines the back inclined

the operation.

• Front ace machining (P_prole_T1)

This Pocket operation, using the Clear _{strategy, machines the front inclined}

the operation.

www.cadfamily.com EMail:[email protected]

(26)



• Openings machining (F_prole_T1)

This Prole operation machines two openings, located on the front inclined face of the clamp. Machine Coordinate system #1 (Position #4) is used for

the operation.

• Slot machining (P_prole_T; P_prole_T)

These Pocket operations machines the slot faces located on the top inclined

face of the clamp, using the Contour strategy. Machine Coordinate system

#1 (Position #2) is used for the operation.

• Hole machining (P_prole_T; D_drill_T D_drill_T)

These operations machine the inclined counterbore hole, located on the top

inclined face of the clamp. Machine Coordinate system #1 (Position #5) is

• Bottom ace machining (P_prole_T1)

This Pocket operation, using the Clear _{strategy, machines the bottom}

inclined face of the clamp. Machine Coordinate system #2 (Position #1) is

For more information see Exercise #1 of the SolidCAM .D Milling Training Course.

www.cadfamily.com EMail:[email protected]

(27)



SiM. 5-AxiS MACHining

The sim__axis_1.prz _{example illustrates the use of the SolidCAM Sim. 5 axis module for}

turbine blade machining.

The following Sim. 5 axis operations are used to perform the semi-nish and nish machining of the turbine blade:

• Blade Semi-nishing

(X_selected_aces_T1A_1; X_selected_aces_TA_)

The rst operation provides the semi-nish of the turbine blade, using a bull nosed tool of Ø16 with a corner radius of 4 mm. A combination of

the Parallel Cuts strategy and Change parallel cuts to spiral option is used to

perform the spiral machining of the blade.

The tool tilting is dened using the Tilted relative to cutting direction _option,

with lag angle of 20°. The tool contact point is dened at the front tool face. This combination of parameters enables you to perform the machining by

the toroidal surface of the tool.

Gouge checking is performed to avoid the possible collisions of the tool with the planar surface of the blade base. The remaining material will be

machined at a later stage, using a special tilting strategy.

www.cadfamily.com EMail:[email protected]

(28)



The second Sim. 5-axis operation provides semi-nishing of the blade area, close to the blade base. This area was not machined in the previous operation because of the gouge protection. A bull nosed tool of Ø8, with a corner radius of 2 mm, is used for the operation. Similar to the previous

operation, a combination of the Parallel Cuts strategy and Change parallel cuts to spiral _{option is used to perform the spiral machining of the blade.}

The tool tilting is dened using the Tilted relative to cutting direction _option,

with a lag angle of 20°. In addition to the lag angle, a side tilting angle of 10° is dened to avoid the gouging of the planar face of the blade base.

• Blade nishing (X_selected_aces_TA)

This operation performs the nishing of the blade. A bull nosed tool of Ø8, with a corner radius of 2.5 mm, is used for the operation.

The tool tilting is dened using the Tilted relative to cutting direction option

with a lag angle of 20°. In addition to the lag angle, a side tilting angle of 10° is dened to avoid the gouging of the planar face of the blade base.

For more information see Exercise # _{of the} SolidCAM Sim. -axis User Guide_.

www.cadfamily.com EMail:[email protected]

(29)



SiM. 5-AxiS MACHining

The sim__axis_.prz _{example illustrates the use of the Sim. 5 axis operation for an}

aerospace part machining.

A number of Sim. 5 axis operations are dened in order to perform the nish machining of the inclined faces of the aerospace frame and their adjacent llets. The inclined faces are forming an undercut area that cannot be machined using 3 axis milling; we have to use 5 axis milling, with the appropriate tilting strategy, to machine the inclined faces.

• Inclined walls nishing

(X_selected_aces1_T1A; X_selected_aces_T1A; X_selected_aces_T1A)

These operations perform the nish machining of the inclined walls. A ball nosed tool of Ø4 is used for the operation.

The Parallel Cuts_{strategy is used to generate a number of cuts parallel to the}

XY plane of the coordinate system.

The tool tilting is dened using the Tilted relative to cutting direction option

with a lag angle of 90°. These parameters enable you to perform the machining with the side face of the tool.

www.cadfamily.com EMail:[email protected]

(30)



• Fillet machining

(X_selected_aces_T1A; X_selected_aces_T1A; X_selected_aces_T1A)

These operations perform the nish machining of the llets adjacent to the walls.

A ball nosed tool of Ø4 is used for the operation.

The Project curves _{strategy is used to generate a single pencil milling pass,}

machining the llets.

The Tilted through curves tilting _{strategy is used to perform a smooth}

transition between different tool axis orientations.

For more information see Exercise # of the SolidCAM Sim. -axis User Guide.

www.cadfamily.com EMail:[email protected]

(31)

0

TUrning

Theturning_1.prz_{example illustrates the use of the SolidCAM Turning for the machining}

of the part shown above.

The following Turning operations are used to perform the machining of the part:

• External Roughing (TR_prole_T1A)

This operation is used to generate the tool path for the external faces roughing. An External roughing tool is used for the operation. The Long Process type is chosen for the operation to perform the machining in

longitudinal direction. The Rough Work type is chosen for the operation;

with this Work type the rough machining is performed in a number of

equidistant passes.

• Facial Turning (TR_prole1_T1A)

This operation is used to generate the tool path for the front face machining. An External roughing tool is used for the operation. The Face Process type _is

chosen for the operation to perform the machining in facial direction. The

Rough _{work type is chosen for the operation; with this work type the rough}

machining is performed in a number of equidistant passes.

• Drilling (DRILL__TA)

This Drill operation is used to perform the rough machining of the hole. A U-Drill tool of Ø28 is used for the operation.

www.cadfamily.com EMail:[email protected]

(32)

1

• External Finishing (TR_prole_TA)

This Turning operation is used to perform the external faces nishing.

The Prole Work type is chosen to generate the nishing pass. An External

roughing tool is used for the operation.

• Internal Turning (TR_prole_TA)

This Turning operation is used to perform the internal faces nishing.

The Prole Work type is chosen to generate the nishing pass. An Internal

• External Grooving (GR_prole_TA)

This Grooving operation is used to perform rough and nish machining of the external groove faces. An External grooving tool is used for the

operation.

• Internal Grooving (GR_prole_TA)

This Grooving operation is used to perform rough and nish machining of the internal groove faces. An Internal grooving tool is used for the

operation.

• External Threading (TH_prole_TA)

This Threading operation is used to perform the machining of the external thread with the minimal diameter of 56 mm and pitch of 1.5 mm. An External threading tool is used for the operation.

• Internal Threading (TH_prole_TA)

This Threading operation is used to perform the machining of the internal thread with the maximal diameter of 33.5 mm and pitch of 1.5 mm. An Internal threading tool is used for the operation.

• Parting (GR_prole_TA)

This Grooving operation is used to perform the parting (cut-off) of the

machined part from the stock bar. The Cut Work type _{is used for the}

operation. An External grooving tool is used for the operation.

For more information see Exercise #1—#11 of the SolidCAM Turning Training Course.

www.cadfamily.com EMail:[email protected]

(33)



TUrning

Theturning_.prz_{example illustrates SolidCAM functionality for Rest Material machining,}

during longitudinal and facial rough/nish turning operations, performed on the wheel part shown above.

The following Turning operations are used to perform the machining of the part:

• External Roughing (TR_prole_T1A)

This operation is used to generate the tool path for the external faces roughing. An External roughing tool is used for the operation. The Long Process type is chosen for the operation to perform the machining in the

longitudinal direction. The Rough Work type is chosen for the operation;

with this Work type the rough machining is performed in a number of

equidistant passes.

• External Rest Material Roughing (TR_prole_TA)

This operation utilizes the Rest Material option to perform the machining of the areas left unmachined after the previous operation. These areas were unmachined because of the orientation and geometry of the tool used in the previous operation. In this operation a tool with opposite orientation is used to machine the part, moving in the positive Z-direction.

www.cadfamily.com EMail:[email protected]

(34)



• External Finishing (TR_prole1_TA)

This Turning operation is used to perform the external faces nishing.

The Prole Work type is chosen to generate the nishing pass. An External

Contour tool is used for the operation to avoid leaving unmachined areas during the external nish.

• Facial Roughing (TR_prole_TA)

This operation is used to generate the tool path for the front face roughing. An External roughing tool is used for the operation. The Face Process type _is

chosen for the operation to perform the machining in facial direction. The

Rough _{work type is chosen for the operation; with this work type the rough}

machining is performed in a number of equidistant passes.

• External Rest Material Roughing (TR_prole_TA)

This operation utilizes the Rest Material option to perform the machining of the areas left unmachined after the previous operation. These areas were unmachined because of the orientation and geometry of the tool used in the previous operation. In this operation the tool with opposite orientation is used to machine the part, moving in the positive X-direction.

• External Facial Finishing (TR_prole_TA_1)

This Turning operation is used to perform the front face nishing. The

Prole Work type _{is chosen to generate the nishing pass. An External}

• External Rest Material Finishing (TR_prole_TA_1)

This operation utilizes the Rest Material option to perform the machining of the areas left unmachined after the previous nishing operation. These areas were unmachined because of the orientation and geometry of the tool used in the previous operation. In this operation the tool with opposite orientation is used to machine the part, moving in the positive X-direction.

The Prole Work type is chosen to generate the nishing pass.

• Hole machining (DRILL__TA)

This Drill operation is used to perform the machining of the hole. A U-Drill tool of Ø40 is used for the operation.

For more information see Exercise #1 _{of the} SolidCAM Turning Training Course_.

www.cadfamily.com EMail:[email protected]

(35)



TUrn-Mill

The turn_mill_1.prz _{example illustrates the use of the SolidCAM Turn-Mill module for}

the machining of the part shown above on a CNC-Machine of the XZC type.

The following Turning and Milling operations are used to perform the machining of the part:

• External Turning (TR_prole_T1)

This operation is used to generate the tool path for the rough and nish machining of the external faces. An External roughing tool is used for the

operation. The Long Process type is chosen for the operation to perform

the machining in longitudinal direction. The Rough Work type is chosen for

the operation; with this Work type the rough machining is performed in a

number of equidistant passes. The ISO_Turning_method _{option is chosen for}

the Finish _{in order to generate the nishing tool path with the same tool.}

• Facial Milling (F_prole1_T)

This Prole operation performs the rough and nish milling of the hexagon and the adjacent faces of the model. Position #1 of Coordinate System #1 is used to perform the facial machining. An end mill of Ø10 is used for the

operation.

TheClear osetoption is used at the roughing stage to perform the machining

in a number of equidistant offsets from the machining geometry.

A machining allowance of 0.2 mm is left unmachined during the roughing. This allowance is machined during the nishing pass.

www.cadfamily.com EMail:[email protected]

(36)



• External Finishing (P_prole_T)

This Pocket operation is used to perform the simultaneous 4-axis machining of the pocket wrapped on the external face of the part. Position #1 of Coordinate System #2 is used to perform the pocket machining. An end

mill of Ø6 is used for the operation.

TheWrapoption, chosen during the machining geometry denition, enables

you to dene the wrapped geometry of the pocket directly on the solid

model.

The Contour strategy is chosen for the pocket machining.

For more information see Exercise # of the SolidCAM Turn-Mill Training Course.

www.cadfamily.com EMail:[email protected]

(37)



TUrn-Mill

The turn_mill_.prz _{example illustrates the use of the SolidCAM Turn-Mill module for}

the machining of the optical part shown above, on a CNC-Machine of the XYZC type. The following Turning and Milling operations are used to perform the machining of the

part:

• Turning

(TR_prole1_T1; TR_prole1_T1_1; DRILL__T; TR_prole10_T)

These turning operations are used to generate the tool path for the rough and nish machining of the external and internal cylindrical faces.

• Facial Milling (F_prole_T; D_drill_T; D_drill_T)

These operations perform the machining of the screw slot and four holes using SolidCAM capabilities for facial milling. Position #1 of Coordinate System #1 is used to perform the facial machining.

• Machining o the side aces (P_prole_T)

This Pocket operation is used to perform the machining of the side faces of

the model. The Contour _{strategy is used in combination with a negative}Wall oset _{value in order to generate an overlapping tool path that completely}

machines the faces.

Position #2 of Coordinate System #2 is used for the operation. The

Transorm option is used to create a circular pattern of operations around

the revolution axis.

www.cadfamily.com EMail:[email protected]

(38)



• Drilling on the side ace (D_drill_T)

This Drill operation is used to perform the machining of two holes located on the side face of the model. Position #2 of Coordinate System #2 is used

for the operation.

• Slot machining (F_prole_T)

This Prole operation is used to perform the machining of the slot using indexial 4-axis milling.

Position #3 of Coordinate System #2 is used for the operation. An end mill of Ø2.5 is used for the operation.

• Radial holes machining

(D_drill1_T; P_prole_T; D_drill_T; P_prole_T)

These Drill and Pocket operations are used to perform the machining of

three counterbore holes located on the cylindrical face.

Position #4 and Position #5 of Coordinate System #2 are used for the

operations.

• Pocket machining (P_prole_T)

This Pocket operation is used to perform the simultaneous 4-axis machining of the pocket, wrapped on the external face of the part. Position #1 of Coordinate System #2 is used to perform the pocket machining. An end mill of Ø2.5 is used for the operation.

TheWrapoption, chosen during the machining geometry denition, enables

you to dene the wrapped geometry of the pocket directly on the solid

model.

The Contour strategy is chosen for the pocket machining.

For more information see Exercise #1 _{of the} SolidCAM Turn-Mill Training Course_.

www.cadfamily.com EMail:[email protected]

(39)



TUrn-Mill

The turn_mill_.prz _{example illustrates the use of the SolidCAM Turn-Mill module for}

the machining of the console part shown above on a CNC-Machine of the XYZCB

type.

• Turning (TR_prole_T1)

This turning operation is used to generate the tool path for the rough and nish machining of the external cylindrical faces.

• Indexial milling (F_prole_T)

This Prole operation is used to perform the machining of the cube sides using the SolidCAM indexial milling capabilities. Position #2 of Coordinate System #2 is used for the operation. The Transorm _{option is used to create}

a circular pattern of operations around the revolution axis in order to

machine all the cube faces.

An end mill of Ø16 is used for the operation.

www.cadfamily.com EMail:[email protected]

(40)



• Horizontal aces machining (F_prole1_T)

This Prole operation is used to perform the indexial milling of the horizontal faces at the front part of the console. Position #2 of Coordinate System #2 is used for the operation. The Transorm option is used to create

a circular pattern of operations around the revolution axis in order to machine both sides of the console’s front part.

• Inclined aces machining (F_prole_T; F_prole_T)

These Prole operations are used to perform the machining of the inclined faces using the B-axis. Positions #2 and #3 of Coordinate System #3 are

used for these operation.

An end mill of Ø16 is used for the operations.

• Pocket machining (P_prole_T)

This Pocket operation is used to perform the machining of the pocket located on the inclined faces, using the B-axis. Position #2 of Coordinate System #3 is used for the operation.

• Inclined aces machining (F_prole_T; F_prole_T)

These Prole operations are used to perform the machining of the inclined faces on the cube, using the B-axis. Positions #4 and #5 of Coordinate System #3 are used for the operation.

• Hole machining (D_drill_T; D_drill1_T; D_drill_T; D_drill_T)

These Drill operations are used to perform the machining of the inclined faces on the cube, using the B-axis. Position #2 of Coordinate System #2 and Positions #3, #4 and #5 of Coordinate System #3 are used for the

operations.

For more information see Exercise #1 of the SolidCAM Turn-Mill Training Course.

www.cadfamily.com EMail:[email protected]

(41)

0

TUrn-Mill - 2 SPinDlES

The back_spindle.prz _{example illustrates the use of the SolidCAM Back Spindle}

functionality for the machining of the connector part shown above, on a Turn-Mill CNC-Machine of the XYZCB type.

• Turning and ront side milling

(TR_prole_T1A; DRILL__TA; F_prole1_TA; TR_prole_TA)

These operations are used to perform turning and facial milling of the front faces of the connector. Position #1 of Coordinate System #1 is used for

the operation. The back spindle is not used in these operations; only the main spindle is used.

• Indexial machining o the middle part

(F_prole_TA; D_drill_TA; D_drill_TA; F_prole_TA)

These Prole and Drill operations are used to perform the machining of

the pads and holes located around the cylindrical surface, in the middle

part of the connector. Position #2 of Coordinate System #2 is used for

the operation. The Back Spindle Connect operation is dened before these

operations, enabling the combined use of both spindles (main and back) in

these operations.

www.cadfamily.com EMail:[email protected]

(42)

1

• Indexial machining o the back part (P_prole_TA; D_drill_T10A)

These Prole and Drill operations are used to perform the machining of

the pads and holes located around the conical surface, in the middle part

of the connector. Position #2 of Coordinate System #3 is used for the

operation. The Back Spindle MoveBack operation is dened before these

operations, causing the retract of the back spindle, so that these operations are performed with the main spindle only.

• Turning and back side milling

(TR_prole_T1B; F_prole10_T11A; DRILL__T1A; TR_prole11_ T1A; F_prole1_T1A; D_drill_T1A; D_drill_T1A)

These operations are used to perform turning and facial milling of the back faces of the connector. Position #1 of Coordinate System #1 is used for the turning operation. Position #1 of Coordinate System #4 is used for the milling operation. The Back Spindle Transer operation is dened before

these operations, causing the transfer of the part from the main spindle to the back spindle. The machining is performed on the part clamped in the

back spindle.

Refer to the SolidCAM Turning User Guide _{for more information about the Back spindle}

functionality.

www.cadfamily.com EMail:[email protected]

(43)



WirE CUT

The wire_cut.prz _{example illustrates the use of the SolidCAM Wire Cut module for the}

plate part machining.

The following Wire Cut operations are used to perform the machining of the part:

• Central cut machining (F_prole)

This Prole operation is used to machine the central through cut. The

Later option is used for the Auto Stop technology, generating a postponed

separate sub-operation preventing the material dropping.

• Front cut machining (F_prole)

This Prole operation is used to machine the through cut located in the

front area of the part. The Later option is used for the Auto Stop technology,

generating a postponed separate sub-operation preventing the material dropping.

• Cylindrical holes machining (F_prole)

This Prole operation is used to machine two through cylindrical holes,

located on the top face of the model.

www.cadfamily.com EMail:[email protected]

(44)



• Countersink machining (A_prole; F_prole)

The Angle operation is used to machine the six countersink cones of 90°. The insertion points of the wire are chosen close to the hole centers, where the preparatory drilling is performed. The Angle operation tool path

is generated in such a way so as to obtain the necessary diameter of the cylindrical part of the hole (8.1 mm) at the necessary depth (4.45 mm). The Prole operation performs the machining of the cylindrical part of the

countersink hole.

Refer to the Wire Cut User Guide for more information about the Wire Cut module.

www.cadfamily.com EMail:[email protected]

(45)



TrAining MATEriAlS

The following training courses are suitable both for SolidCAM frontal training and for

self study.

• SolidCAM Milling Training Course: .D Milling • SolidCAM Milling Training Course: D Milling • SolidCAM Turning Training Course

• SolidCAM Turn-Mill Training Course

These documents are available in the following format: PDF for on-line use + Examples

The following user guides for SolidCAM are available.

• SolidCAM Milling User Guide • SolidCAM HSM User Guide

• SolidCAM Sim. -axis User Guide • SolidCAM Turning User Guide • SolidCAM Wire Cut User Guide

The PDF versions of user guides are available for download from the Download area of

SolidCAM Web site: www.solidcam.com.

On-line help, based on these user guides, is available within SolidCAM.

www.cadfamily.com EMail:[email protected]

(46)



SySTEM rEqUirEMEnTS

• Microsoft® Windows XP Professional with Service Pack 2 (recommended), Microsoft® Windows XP Professional x64 Edition, Windows 2000 with Service Pack 3 or 4

• Intel® Pentium™, Intel® Xeon™, Intel® Core™, AMD® Athlon™ - class

processor

• 512 MB RAM or more (1 GB or more recommended for large CAM-Parts machining)

• An OpenGL workstation graphics card (256 MB RAM recommended) and

driver

• Mouse or other pointing device

• CD drive

• Internet Explorer version 6 if you are using the SolidCAM online help

• For viewing SolidCAM User Guides and Training Courses, Adobe Acrobat version 7.0.7 or higher is recommended.

www.cadfamily.com EMail:[email protected]

(47)

www.cadfamily.com EMail:[email protected]

(48)