Gas and flame detection Stack gas and dust analysis

Gas and flame detection

Stack gas and dust analysis

Portable gas detectors

Measurement and alarm units

Detectors/transmitters

Stack gas and dust analysers

Accessories

ATEX ATEX ATEX ATEX ATEX ATEX ATEX ATEX ATEX 7000 hours autonomy Available in 2004

Explosimet

ers

Infr

ar

ed t

o

ximet

er

T

o

ximet

ers and o

x

ygenomet

ers

To preserve the environment, a recyclable portable gas detector. 3 versions available :

CO, H2S, O2.

GD 2000 EX 2000

MX 2000

Multigas detector, for up to 4 gases simultaneously. Very good shock robustness. 2 threshold alarms.

MX 2100

Multigas detector for use in zone 0 ! Detects up to 5 gases simultaneously, up to 6 measurement ranges available.

GLD 2000

The only ATEX explosive gas leak detector. Explosimeter, catharometer, gas discrimination,

sensitivity : 1 ppm CH4.

M

ult

ig

as

Stand alone

A series of toximeters and oxygenometers available in long-running version (2000+ series) and HBCO version

C 2000

Measures CO2using the infrared cell detection

principle.

P ro t e c t i n g p e o p l e

Portable gas detectors

BM25

The new stand alone monitor with radio link.

CO2DETECTION

Le

ak det

ect

or

For explosive gas detection, with various models

featuring content display, catharometer function,

or discrimination between natural gas and

other explosive gases.

NEW

NEW NEW

NEW

ATEX ATEX ATEX ATEX ATEX ATEX

Infr

ar

ed t

ransmitt

er for CO

Flame det

ect

or

Infr

ar

ed det

ect

or / t

ransmitt

ers

Flammable g

as det

ect

ors

Semi-c

onduct

or det

ect

or

A

nalogue and dig

ital det

ect

or

OLC 50

Equipped with explosimetric cell insensitive to poisons

OLC 20/20D

A generation of flameproof sensor blocks for explosive gases designed for assemblers (OLC 20) and manufacturers (OLC 20D).

TBG

Semi-conductor explosimetric detector.

TBGW EX

Analogic and digital explosimetric detector (also exists in Toximetric version). Loop connection.

TCOD IR

This detector/transmitter continuously measures the carbon dioxide concentration using the IR absorption principle.

SharpEye

A series of flame detectors adapted to all types of fire, meeting the requirements of a wide range of applications by analysing radiation in the ultra-violet and infrared spectra.

OLCT IR

Infrared detector for industrial applications. For flammable gases

and CO2.

Fo r s i t e s a f e t y

A series of detectors to meet various needs,

depending on your applications, and site

classification.

Detectors / Transmitters

CAPTEX

Explosimetric detector for small units, equipped with flameproof cell.

CEX 300

Designed for industry and service providers. This explosimetric cell with increased-safety casing and flameproof cell is placed in areas at risk.

A

cc

essor

ies

Det

ect

ors / t

ransmitt

ers for flammable g

ases and o

x

ygen deficiency

CTX 300

The very wide range of cells in this detector / transmitter makes it a highly adaptable instrument. For explosive, toxic

gases and O2.

OLCT 40

A generation of detectors / transmitters insensitive to corrosive agents, designed for industry. Depending on needs or gases to be detected, available with remote functions, enhanced-safety junction box, flameproof cell or intrinsic safety. For explosive, toxic

gases and O2.

OLCT 50

A generation of

detector / transmitters insensitive to corrosive agents, designed for industry. Available with remote function, flameproof or intrinsic safety versions depending on needs or gases to be detected. For

explosive, toxic gases and O2.

OLCT 60A

A generation of

detector/transmitters with display insensitive to

corrosive agents, designed for industry. Available with remote function, flameproof or intrinsic safety versions depending on needs or gases to be detected. For explosive,

toxic gases and O2.

Non-intrusive calibration and maintenance.

electrovalves

A wide range with easy connections, waterproof,

high wear resistance. Flameproof version available.

OLCT 20/20D

A generation of detector block / 4-20 mA transmitters designed for assemblers (OLCT 20) and manufacturers (OLCT 20D). Flameproof or intrinsic safety depending on needs or gases to be detected. For explosive and toxic

gases and O2.

A series of detectors to meet various needs,

depending on your applications,

and site classification.

A very wide range

of additionnal products

available including :

Fo r s i t e s a f e t y

Detectors / Transmitters

To o p t i m i s e y o u r i n s t a l l a t i o n s

Accessories

Tubes and pumps

More than 150 types of tubes available for qualitative and quantitative analysis.

BP 2000

Pump for portable gas detectors.

Test terminal and calibration station

To test reliability and operation of the products.

OLCT 80

A multi-function detector / transmitter with display ; 4-20 mA input, built-in alarm and fault relay, memory setting and request remote controlled. 4-20 mA and RS 485 output, loop connection possible. Depending on needs or gases to be detected, available as remote function, flameproof or intrinsic safety versions. For explosive and

toxic gases and O2. Non-intrusive

calibration and maintenance.

NEW

ATEX

ATEX ATEX

ATEX ATEX

B

iog

as analysers

Vigipark

• 10 cyclic sampling channels, 4 fixed channels for CO-NOx

• Fire detectors can be connected

• 4 instant thresholds, 2 average thresholds 1 threshold per channel

MX 52

• 1 to 16 channels • 3 alarm thresholds,

one trouble threshold • Programming by keyboard

or PC

MX 62

• 64 protected channels • Direct network and loop

connections • Self-checking • SIL 3

DGM9

Analysis unit for gases released during decomposition of organic

waste (CO2- CH4- O2- H2S).

MX 42 A

• Fixed or scrolling display • 4 gas alarm and fault thresholds • Built-in relays

Mo n i t o r i n g y o u r i n s t a l l a t i o n s

Measurement and alarm units

1 to 4 channels

1 t

o

64 c

hannel measur

ement and alar

m units

Wingas • Centralised monitoring in network • Continuous self-checking • Networking of up to 32 instruments MX 48

• 3 gas alarm thresholds programmable per channel

• Programming by keyboard or PC • Series output

SV 4B

• Low cost and easy to install • Continuous self-checking • Built-in relays

1 to 2 channels 1 to 4 channels

1 to 8 channels 1 to 14 channels 1 to 16 channels 1 to 64 channels

model for car parks

special

BIOWIN

Biogas analysis unit (CO2- CH4

-O2- H2S - H2- other gases on

request). RS 232 or RS 485 output.

NEW

For all detectors in the OLDHAM range

and standardised 4-20 mA output detectors.

1 channel

Fits with sensors in loop configuration ATEX

Your agent or retailer

Plant and head office : Z.I. Est - rue Orfila B.P. 417 - 62 027 ARRAS Cedex FRANCE Tel. : 33 3 21 60 80 80 Fax : 33 3 21 60 80 00

Web site : http://www.oldham.fr

OLDHAM Belgium t(33) 03 21 60 81 20 f(33) 03 21 60 81 02 [email protected] OLDHAM Italia t011-3801371 f011-3806613 [email protected] OLDHAM Cˇeská Republica t420 234 622 222/3 f420 234 622 220 [email protected] OLDHAM Romania t(40) 21 222 4846 f(40) 21 222 5037 [email protected] OLDHAM Switzerland t(41) 26 652 51 18 f(41) 26 652 51 19 [email protected] OLDHAM United Kingdom t(44) 0 1782 562002 f(44) 0 1782 564414 [email protected] WINTER Deutschland t(49) 231 924 10 f(49) 231 924 125 [email protected] NEW NEW NEW

Dust det

ect

ors

Dust analysers / opacimet

ers

Gas analysers

This is not a contractually binding document. OLDHAM SA reserves the right to make any changes, without notice, to the technica

l characteristics of its equipement. Designed and created by Audace 33 3 21 135 600. Edition ref.: GammeGB09

E 6200

In situ gas analyser for simultaneous analysis of up to 6 gases. EP 500 Dust analyser providing continuous and in-situ measurement of smoke opacity. EP 1000 A

In-situ dust analyser using laser back-scattering technology.

EP 2000

Dust analyser based on the laser post-diffusion principle, ideal for measuring very low quantities.

300 Series

Ultra-sensitive dust detectors, technology using triboelectric effect with automatic adjustment procedure.

FAN Series

Continuous gas analysis and sampling unit, high

adaptability.

LG 3000

In situ gas and process control analyser, resisting to high temperatures and magnetic fields.

protecting environment

Emission gas and dust analysis

P

o

rtable g

as analysers

PAN Series

Portable gas analyser

for continuous and simultaneous measurement of several pollutants and combustion gases.