• No results found

Router und Internet einrichten S. 2 Installer routeur et Internet p. 4 Installare il router e Internet p. 6 Router and Internet setup p.

N/A
N/A
Protected

Academic year: 2021

Share "Router und Internet einrichten S. 2 Installer routeur et Internet p. 4 Installare il router e Internet p. 6 Router and Internet setup p."

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

(1)

SA P 1 00 43 74 7 0 7/ 20 12 TD M

Router und Internet einrichten

S. 2

Installer routeur et Internet

p. 4

Installare il router e Internet

p. 6

Router and Internet setup

p. 8

Centro grande

Swisscom (Schweiz) AG

Contact Center CH-3050 Bern

(2)

«Did you know? Your router has WPS!

For more information, please go to www.swisscom.ch/wps.»

9 8

Preparation

1.

Important!Your Internet-connection will be activated at the chosen specific date that

has been communicated to you. You will also receive a text message (SMS) informing you that your connection is ready: you can then start with your installation.

2.

Important!Remove the devices and cables you have been using up until now

(in order to always use the latest technology):

Simple disposal: you can send your old devices and cables back to Swisscom by post, at no cost or bring it to the nearest Swisscom Shop. To do so, please use the return sticker enclosed with the delivery notice.

3.

Unplug all telephone and fax devices.

4.

What do your telephone sockets look like?

a) b) c) d)

or or or

4.1 Plug a new microfilter into a telephone socket.

a) b) c)

Important! a) b) c) For every telephone socket you wish to use in your home you must

plug in a new microfilter. You can purchase additional microfilters and adapters in your Swisscom Shop.

4.2 For customers with a wireline phone:

plug your wireline phone device into the microfilter.

Exception! d) For this socket you don’t need a microfilter. Your splitter and the illustrated socket have the same function for all the telephone sockets in your home. Ethernet 1 2 3 4 Inte rnet L S D s s e l e r i W r e w o P 123 456 789 *0# DSL

Router setup

5.

Connect your new router as shown in the overview illustration (p. 12–13) with:

5.1 DSL cable Connect your router to the microfilter.

5.2 Ethernet cable Connect your router to a computer.

5.3 Power supply unit Connect your router to the electrical socket.

6.

Switch your router on. The «power» light goes on.

7.

Please wait until the following router lights are on and white.

Activate your Internet

8.

Restart your computer.

9.

Before you can start surfing the net, you need to register.

Start your browser: Internet Explorer , Firefox , Safari etc. The DSL registration page will automatically appear in your browser window (www.swisscom.ch).

Please fill in all the required information step by step.

10.

You have now successfully configured your Internet.

Note: If you have Swisscom TV, please also restart your TV-Box (switch on the back of your TV-Box if available, else unplug power cable).

WLAN setup

Please follow the enclosed instructions to connect your computer to your WLAN network.

up to 15 min.

microfilter

router & power supply unit all microfilters DSL cable (router –

telephone socket) English remove adapter telephone d) splitter

(3)

Power Internet WLAN

Dépannage

Le routeur n’est pas prêt

(Power ne s’allume pas)

>La prise est-elle branchée correctement? >Le routeur est-il allumé?

(clignote en blanc ou rouge)

>Pas d’erreur, prière d’attendre 15 min. jusqu’à ce que (Internet) devient blanc et n’éteignez pas le routeur!

L’Internet ne fonctionne pas

(voyant rouge allumé)

>Le nouveau câble DSL (violet) et nouveau microfiltre sont- ils branchés correctement?

>Avez-vous reçu le SMS ( voir p. 5 no 1)? >Réinitialiser le routeur: appuyez le

bouton Reset pendant 15 secondes. Attendre jusqu'à ce que s'allument en blanc.

WLAN pas allumé

>Appuyez sur la touche .

Aide supplémentaire

>Internet: www.swisscom.ch/aide >Numéro gratuit: 0800 800 800

Données d’accès WLAN

>Votre nom WLAN (SSID) et votre mot de passe se trouvent dans votre espace clients:

www.swisscom.ch/espaceclients sous «Données d’accès Internet».

Störungsbehebung

Router nicht bereit

(Power leuchtet nicht)

>Stromkabel richtig angeschlossen? >Router eingeschaltet?

(blinkt weiss oder rot)

>Kein Fehler, bitte 15 Minuten warten, bis (Internet) weiss ist. Router solange nicht ausschalten!

Internet funktioniert nicht

(leuchtet rot)

>Neues DSL-Kabel (violette Stecker) und neue Mikrofilter richtig eingesteckt? >SMS erhalten (siehe S. 3 Nr. 1)? >Router rücksetzen: Reset-Knopf

während 15 Sekunden drücken. Warten bis weiss leuchten.

WLAN leuchtet nicht

>Drücken Sie auf die Taste .

Weitere Hilfe

>Internet: www.swisscom.ch/hilfe >Gratisnummer: 0800 800 800

WLAN Zugangsdaten

>Ihren WLAN Namen (SSID) und Ihr Passwort finden Sie im Kundencenter: www.swisscom.ch/kundencenter unter «Internet-Zugangsdaten».

Risoluzione dei guasti

Router non pronto

(Power non si illumina) >Cavo della corrente collegato

correttamente? >Il router è acceso?

(lampeggia in bianco o rosso) >Nessun errore, attendere 15 minuti

finché (Internet) si illumina di bianco. Non attivare il router per questo periodo!

Internet non funziona

(si illumina di rosso)

>Nuovo cavo DSL (bianco con prese violette) e i nuovi microfiltri inseriti correttamente?

>Ricevuto SMS (vedere p. 7 n. 1)? >Resettare il router: premere il tasto

Reset per 15 secondi. Attendere fino a quando diventano bianche.

WLAN non s’illumina

>Premere il tasto .

Aiuto supplementare

>Internet: www.swisscom.ch/aiuto >Numero gratuito: 0800 800 800

Dati d’accesso a WLAN

>Nell’Area clienti trovate il vostro nome WLAN (SSID) e la password:

www.swisscom.ch/areaclienti sotto «Dati d’accesso a internet».

Troubleshooting

Router is not ready

(Power light is not on)

>Is the power cable correctly connected to the power supply?

>Is the router switched on? (light is blinking in white or red)

>No error. Please wait 15 minutes until (Internet) turns white. Do not switch off the router during this time!

Internet is not working

(red light is on)

>Did you connect the new DSL cable and the new microfilters correctly?

>Have you already received the confirmation text message (SMS) (see p. 9 no 1)?

>Reset router: push the Reset button for 15 seconds.

Wait until lights are on and white.

WLAN is not on

>Push the button .

Further help

>Internet: www.swisscom.ch/help >Toll-free number: 0800 800 800

WLAN access data

>Your WLAN name (SSID) and password are in your customer center:

www.swisscom.ch/customercenter under «Internet access data».

(4)

1 2 3 4 < >... 1 2 1 2 1 23 4 5 6 78 9 * 0 # 15 min. 12 5.1 DSL (Kabel/câble/cavo/cable )

4.

Telefonsteckdose Prise téléphonique Presa telefonica Telephone socket 4.1 Mikrofilter Microfiltre Microfiltro Microfilter a) Computer Ordinateur 12 5.2 Ethernet (Kabel/câble/cavo/c able)

5.

Centro grande – Router/routeur

5.3

Netzgerät

Prise d’alimentation Alimentatore Power supply unit

6.

ein allumé acceso on

7.

warten attendre attendere wait 4.2 Festnetz Réseau fixe Rete fissa Wireline 13

zi

eh

en

tir

er

tir

ar

e

pu

ll

(5)

Montagemöglichkeiten:

Possibilités de montage:

Opzioni di montaggio:

Installation and mounting possibilities:

Horizontal Horizontal Orizzontale Horizontal Standfuss Piédestal Base Foot Wandmontage Montage mural Montaggio a parete Wall-mount

Kabelabdeckung:

Couvercle cache-câbles:

Protezione cavi:

Cable cover:

References

Related documents

Step 6 Replace the router cover as described in Chapter 5, “Maintaining the Cisco 10720 Internet Router”, in the Cisco 10720 Internet Router Installation and Configuration Guide

1) With the router unplugged from the electrical socket, connect an Ethernet cable from the eMTA to your wireless router’s WAN port (sometimes labelled “Internet”). 2) Once

Your CapTel 2400i can connect to your Internet service either with an Ethernet cable or through a wireless (WiFi) network.. Depending on your Internet setup, a router may also

Your CapTel 2400i can connect to your Internet service either with an Ethernet cable or through a wireless (WiFi) network.. Depending on your Internet setup, a router may also

With the yellow Ethernet cable that came with the router, connect your modem to the Internet port of your

When used with the Virtual Servers feature, allows users to connect to Servers on your LAN using a Domain Name, even if you have a dynamic IP address which changes every time

2- Make sure the connection type setup in your Router is set to PPOE if it is not &amp; you have internet connection that mean your DSL Modem/router is not bridged correctly and your

Mariën 31/01/2006 internet intranet DMZ internet Router Firewall switch Firewall HUB internet Router Firewall switch Router