PRICE LIST

(1)

(2)

REGULATORS

Regulator Systems 5

Octopus

16 First stages

19 Regulator Accessories

20 INSTRUMENTS

Computers

27 Consoles

30 Instrument Accessories

33 BUOYANCY COMPENSATORS

Buoyancy Compensators

37 BC Accessories

40 TECH LINE

X-TEK

45 SUITS

Drysuits & Undersuits

53 Wetsuits

56 Size Charts

69 Boots

70 Size Charts

71 Gloves

72

175, Allée belle vue - les Terriers nord 06600 Antibes - France Tel: +33 (0)4 92 91 30 30 Fax: +33 (0)4 92 91 30 31

www.scubapro.com

ESSENTIALS

Masks

77 Mask Accessories

81 Snorkels

82 Fins

84 Fins Accessories

87 ACCESSORIES

Tanks

91 Knives

92 Bags

94 Lights

98 Weights

100 Other Accessories

100 DIVE WEAR & POS

Dive Wear & POS

105

Information in this document is correct at 01/10/14 but is subject to change without notification. Photographs in this document are non-contractual.

(3)

(4)

(5)

_{PAGE 5}

MK25 EVO / A700

Part number

Description

12.770.040 INT 232 12.770.060 DIN 300

A unique system offering incomparable performance and beauty. Full-metal design ensures a hard-wearing, compact second stage. A dramatically evolved balanced piston first stage with 30% increased freezing resistance, greater inhalation sensitivity for ultra-fast breathing response, instant delivery of air on demand and extra-high airflow no matter how cold the water temperature.

First stage

• New XTIS (Extended Thermal Insulating System) with mechanism fully insulated from the environment, improves cold water/ freezing resistance without compromising piston breathing performance. (Patent pending)

• Additional fins on machined body provide extra thermal exchange • Modern cosmetic design.

• Key insulation system components visible in blue. • Meets new EN250-2014 standards requirements • Air Balanced Piston

• 2 HP ports • 5 High Flow Ports • Swivel

A700

Part number

11.700.000

SCUBAPRO once again sets the standard for second stage regulator performance with the A700. Integrating air-balanced valve technology, the A700 brings you extraordinary breathing performance in a striking, precision-handcrafted, full metal package. Whatever your dive destination, the SCUBAPRO A700 lets you breathe effortlessly and naturally underwater for a lifetime of exceptional dive experiences.

Second Stage

• Air Balanced Flow Valve

• Diver’s Adjustable Inhalation Effort • Co-Axial Adjustable VIVA • Super High Flow Exhaust valve • Full Metal Housing

• Metal Components

• Super Comfort High-flow Mouthpiece

MK17/A700

Part number

Description

12.714.000 INT 232 12.714.300 DIN 300

With the same unique look and feel of the MK25/A700, this is the ultimate system for cold and murky water. Every component is designed for extreme resistance to freezing.

First Stage

• Balanced Diaphragm • Dry Chamber • 2 HP/ 2 LP ports • 2 High Flow Ports

(6)

_{PAGE 6}

MK25/S600 DEEP BLUE

Part number

Description

12.950.060 INT 232 12.950.070 DIN 300

The flawless performance of our best-selling air balanced second stage made super lightweight and corrosion resistant, with an interior titanium barrel, in a jewel-colored deep blue PVD finish for high scratch and corrosion resistance

First Stage

• Air Balanced Piston–Controlled

• Jewel colored Deep Blue PVD exterior finish guarantees high scratch and corrosion

resistance

• 2 HP Ports • 5 High Flow Ports • Swivel

Second Stage

• New Titanium Core 2nd Stage

• Jewel colored Deep Blue PVD exterior finish • Full Titanium Barrel

S600

Part number

11.603.000

Timeless design and chrome plated marine grade brass make this high performing system a classic.

Second Stage

• Diver’s Adjustable Inhalation Effort • Adjustable VIVA

• High Flow Exhaust Valve • Metal Components

• Super comfort High-flow mouthpiece

MK25T/S600T

Part number

Description

12.780.060 DIN 300

The first stage is machined from a solid block of titanium, the second stage uses titanium on the exterior housing plus a machined titanium interior barrel.

First Stage

• Full titanium 1st stage • Air Balanced Piston • 2 HP ports • 5 High Flow Ports • Swivel

Second Stage

(7)

_{PAGE 7}

MK25 EVO/S600/R195 Octopus

Part number

DESIGNATION

12.971.970 INT 232 12.971.960 DIN 300

MK25 EVO/S600

Part number

Description

12.971.050 INT 232 12.971.070 DIN 300

Flawless performance and ease of breathing are the essence of this system. The preferred combo of professionals embarking on long and deep dives and a never-to-regret choice for any demanding diver. Our best-selling S600 is continuously evolving and is in its 5th edition.

First stage

• New XTIS (Extended Thermal Insulating System) with mechanism fully insulated from

the environment, improves cold water/ freezing resistance without compromising piston

breathing performance. (Patent pending)

• Additional fins on machined body provide extra thermal exchange • Modern cosmetic design.

MK25/S600 BLACK TECH

Part number

Description

12.971.080 INT 232 12.971.090 DIN 300

The Black Tech coating is not only for aesthetics, it is also extremely scratch and corrosion resistant. Applied on both the first and second stages, this premium finishing gives a real technical plus to a high performing regulator.

First Stage

• Air Balanced Piston • 2 HP ports • 5 High Flow Ports • Swivel

(8)

_{PAGE 8}

MK17/S600

Part number

Description

12.927.040 INT 232 12.927.060 DIN 300

A system designed to deliver good performance and ease of breathing in all diving conditions.

First stage

S560

Part number

11.560.000

A lighter techno-polymer barrel version of the S600 second stage, the S560 is air balanced with diver adjustable inhalation effort and VIVA. Guarantees effortless and smooth breathing in all conditions. Combined with our new compact MK21 first stage for an ideal recreational system.

Second Stage

• Lightweight techno-polymer barrel • Air Balanced flow Valve

• High Flow Exhaust Valve

• Super comfort high-flow mouthpiece.

Mouthpiece

• New silver silkscre

ened

printing

MK21/S560

Part number

Description

12.974.000 INT 232 12.974.300 DIN 300

More than an excellent mid-range system. This combination offers high performance, reliable SCUBAPRO technology and value.

First Stage

• Compact sized air balanced, piston–controlled first stage • Close to 20% smaller than our MK25

• Mid-range piston 1st stage offering the best compromise for the right price and the

right performance.

• Easy maintenance.

• Unique thermal exchange design with external fins, optimizing freezing resistance • Optional replaceable head for optimal positioning with 4 LP routing configurations (0°/30°). Ideal for Technical diving.

• Standard head with 4 LP hose routing (+/- 20°) • 2 HP ports, one on each side of the body. • Polished chrome plated marine grade brass • Re-designed yoke and cap

(9)

_{PAGE 9}

G260 TACTICAL

Part number

11.263.080

Set yourself apart with the G260 Tactical edition. The high balanced performance of the G260 is housed in a stealth, rugged, nylon fiberglass case, with a dark anodized aluminum ring. Delivered standard with a covered LP hose swivel, or without swivel for special military applications.

Second Stage

• New premium technical 2nd stage

• G260 technology with a stealth, rugged, nylon fiberglass case and a dark anodized

aluminum ring.

• Stealth design knob and nut.

• New covered hose swivel for total comfort and control (available without swivel for

military applications) • Air-balanced Flow Valve

• Diver’s Adjustable inhalation effort • Adjustable VIVA

• High Flow Exhaust valve

• Metal components for excellent cold water resistance • Large Diaphragm

• Reversible Hose Attachment • Super Comfort High–flow mouthpiece

MK25 EVO/G260 TACTICAL

Part number

Description

12.252.050 INT 232 12.252.070 DIN 300

Aimed at technical divers, this system can face any dive situation with rock-solid performances and outstanding reliability.

First stage

• New XTIS (Extended Thermal Insulating System) with mechanism fully insulated

from the environment, improves cold water/ freezing resistance without

compromising piston breathing performance. (Patent pending) • Additional fins on machined body provide extra thermal exchange • Modern cosmetic design.

MK17/G260 TACTICAL

Part number

Description

12.172.080 INT 232 12.172.090 DIN 300

The ideal system for tech divers and cave explorers, perfect for cold waters and with optimal routing options.

First Stage

(10)

_{PAGE 10}

G260

Part number

11.263.000

The G260 is a balanced adjustable second stage featuring metal components for

excellent cold water resistance (inlet tube, orifice, inhalation control knob and hose connector). It’s high performance makes it a choice for all demanding divers and it

will be the natural choice for G250 fans. The left-right hose attachment option makes it ideally suited for tech diving configurations.

Second Stage

• Super High Flow Exhaust valve • Metal Components

• Larger Big Diaphragm • Reversible Hose Attachment • Super comfort High-flow mouthpiece

MK25 EVO/G260

Part number

Description

12.252.010 INT 232 12.252.030 DIN 300

• New XTIS (Extended Thermal Insulating System) with mechanism fully insulated

from the environment, improves cold water/ freezing resistance without

• Key insulation system components visible in blue. • Meets new EN250-2014 standards requirements

MK21/G260

Part number

12.977.300 DIN 300

First stage

• Compact sized air balanced, piston–controlled first stage • Close to 20% smaller than our MK25

• Mid-range piston 1st stage offering the best compromise for the right price and the

right performance.

• Easy maintenance.

• Unique thermal exchange design with external fins, optimizing freezing resistance • Optional replaceable head for optimal positioning with 4 LP routing configurations (0°/30°). Ideal for Technical diving.

(11)

_{PAGE 11}

MK17/G260

Part number

Description

12.172.000 INT 232 12.172.300 DIN 300

The ideal system for tech divers and cave explorers, perfect for cold waters and with optimal routing options.

First stage

• Balanced Diaphragm • Dry Chamber

• 2 HP/ 2 LP ports - 2 High Flow Ports

MK17/G260/R195 Octopus PACKAGE

Part number

Description

12.172.910 INT 232 12.172.900 DIN 300

MK25 EVO/G260/R195 Octopus PACKAGE

Part number

Description

12.252.930 INT 232 12.252.920 DIN 300

(12)

_{PAGE 12}

MK11/S360/R195 Octopus PACKAGE

Part number

Description

12.196.910 INT 232 12.196.900 DIN 300

MK17/S360

Part number

Description

12.173.000 INT 232 12.173.300 DIN 300

The MK17 first stage makes this system ideal for cold or murky waters.

First Stage

S360

Part number

11.363.000

Redesigned cover with silver silk-screened printing makes this air balanced mid-range second stage even more attractive .

Second Stage

• Air balanced Flow Valve second stage • Adjustable VIVA

• Pretuned inhalation effort • High flow Exhaust valve • Also available as Octopus

MK11/S360

Part number

Description

12.196.000 INT 232 12.196.300 DIN 300

Fully pre-tuned and easy to use, an affordable system for recreational divers, travelling divers or for rental use.

First Stage

• Balanced Diaphragm • 2 HP/ 2 LP ports • 2 High Flow Ports

(13)

_{PAGE 13}

R195

Part number

Description

11.331.000

The R195 is a design based on the heritage of the classic R190 second stage, re-engineered with modern features and materials. The R195 combines a classic downstream valve with a large diaphragm and classic purge button. Its simple and robust construction offers the utmost in reliability and makes the R195 the ideal second stage for new divers and a perfect choice for deco tanks thanks to its reversible hose attachment.

Second Stage

• Classic Downstream Valve • Adjustable VIVA

• Reversible Hose Attachment • Larger Big Diaphragm • Pre-tuned inhalation effort

MK2 EVO/R195

Part number

Description

12.118.000 INT 232 12.118.300 DIN300 /R195

Bulletproof reliability and minimal maintenance make it the system of choice for demanding training centers as well as new divers.

A totally evolved classic downstream piston first stage, now more of a workhorse than ever. With increased breathing sensitivity and better airflow, freezing resistance is dramatically increased.

First stage

• New XTIS (Extended Thermal Insulating System) with mechanism fully insulated from the environment, increasing freezing resistance by 50%. (Patent pending)

• Key insulation system components in blue. • Airflow increased by 15%

• The larger piston provides better breathing performance and sensitivity, yet the overall body size, reduced by

3,5mm, results in a more compact first stage.

• Removable orifice allows easier maintenance and longer regulator life. • Modern cosmetic design

• Classic Downstream Piston • 1 HP/ 4 LP ports

MK2 EVO/R195 OCTOPUS

Part number

Description

12.118.100 INT 232 12.118.350 DIN 300

Same characteristics as the MK2 EVO/R195 system, but with a high visibility yellow cover and 1 meter long yellow hose for easy access and air sharing.

First stage

• The larger piston provides better breathing performance and sensitivity, yet the

overall body size, reduced by 3,5mm, results in a more compact first stage.

(14)

_{PAGE 14}

MK11/R095

Part number

Description

12.095.010 INT 232 12.095.030 DIN 300

This system offers recreational divers great breathing performance even in deeper dives, no matter the level of air left in the tank.

First Stage

R095

Part number

Color

11.330.600 Black

New restyled, richer looking classic downstream valve technology second stage, well known for safety and reliability.

Second Stage

• New streamlined look and evident Scubapro branding with embossed purge button • Classic Downstream valve

• Pre-tuned VIVA for uncomplicated use • Reversible hose attachment

MK2 EVO/R095

Part number

Description

12.096.000 INT 232 12.096.300 DIN 300

Thanks to its bullet-proof design, it is the system of choice for training centers as well as new divers.

First stage

• The larger piston provides better breathing performance and sensitivity, yet the

overall body size, reduced by 3,5mm, results in a more compact first stage.

(15)

_{PAGE 15}

MK11/R095 PACKAGE

Part number

Description

12.097.900 INT 232 12.097.930 DIN 300

• MK11/R095 • OCTOPUS R095 • COMPACT SPG 400 Bar

Minimum Order Quantity: 5

MK2EVO/R095 PACKAGE SCHOOL 2

Part number

Description

12.096.935 INT 232 12.096.925 DIN 300

• MK2EVO/R095 • OCTOPUS R095

• COMPACT CONSOLE: PG 400 bar and DG 80 m

Minimum Order Quantity: 5

MK2EVO/R095 PACKAGE SCHOOL 1

Part number

Description

12.096.915 INT 232 12.096.905 DIN 300

• MK2EVO/R095 • OCTOPUS R095 • COMPACT SPG 400 Bar

(16)

_{PAGE 16}

S360 OCTOPUS

Part number

11.363.200

The S360 Octopus has been cosmetically updated, combining the features of the air balanced S360 with a high visibility yellow cover and a 1 meter long yellow hose for easy sharing.

Second Stage

• Air balanced Flow Valve second stage • Adjustable VIVA

• Pre-tuned inhalation effort • High flow Exhaust valve

R195 OCTOPUS

Part number

Description

11.331.200

Combines the features of the R195 with a high visibility yellow cover and a 1 meter long yellow hose for easy sharing.

Second Stage

• Reversible Hose Attachment • Larger Big Diaphragm

R095 OCTOPUS

Part number

11.330.400

Restyled, richer looking, with the same characteristics as the R095, but with a high visibility yellow cover and 1 meter long yellow hose for easy access and air sharing

Second Stage

• Classic Downstream Valve • Pre-Tuned VIVA

(17)

_{PAGE 17}

R195 NITROX OCTOPUS

Part number

11.335.500

For simplicity and top reliability, the R095 has been developed in compliance with the most stringent safety norms.

Second Stage

• Reversible Hose Attachment • Larger Big Diaphragm

MK25 EVO/S560 NITROX

Part number

Description

12.560.500 NITROX 300B

The MK25 EVO/S560 is a specially dedicated Nitrox version, combining our top performing first stage with our balanced S560 second stage. For simplicity and top reliability, they have been developed in compliance with the most stringent safety norms.

MK2 PLUS/R195 NITROX

Part number

Description

12.920.050 MK2PLUS/R195 DIN 300

The MK2 Plus/R195 system and R195 Octopus are also available in a dedicated Nitrox version. For simplicity and top reliability, they have been developed in compliance with the most stringent safety norms.

First Stage

(18)

_{PAGE 18}

AIR 2

Part number

Description

21.090.000 AIR2 (5. GEN)

Now in a new 5th generation version the Air2, is not only an extraordinary BC inflator, but the work-of-breathing has been dramatically improved, providing the same, smooth breathing performance as a downstream second stage regulator and at all tank pressures.

Dramatically improved work-of-breathing effort obtaining the same performance as a traditional downstream second stage.

• Classic Downstream Valve

• Dive/Pre-Dive Switch for adjustable VIVA

• Improved design, control and safety for BC inflating • Larger deflation button and high-comfort mouthpiece

• CE certified EN250 (A> 10°C warm water test controls) as a second stage regulator • Can be assembled on any BC

(19)

_{PAGE 19}

MK17

Part number

Description

10.714.000 INT 232 10.714.300 DIN 300

The MK17 is a high performance, balanced diaphragm first stage engineered especially for cold water or harsh environments. The MK17 is enviromentally sealed

so neither water nor pollution can enter the inner mechanism. Full-metal (chrome plated marine grade brass) body and components and a dry ambient pressure

chamber prevent it from freezing, ensuring trouble free operation even in coldest conditions.

MK21

Part number

Description

10.721.000 INT 232 10.721.300 DIN 300

• Close to 20% smaller than our MK25 • Mid-range piston 1st stage. • Easy maintenance.

• Thermal exchange design with external fins, optimising freezing resistance. • Optional replaceable head for optimal positioning with 4 LP routing configurations (0°/30°) plus a 5th, central LP HF port. Ideal for technical diving.

MK25 EVO

Part number

Description

10.713.010 INT 232 10.713.030 DIN 300

A dramatically evolved balanced piston first stage with 30% increased freezing resistance, greater inhalation sensitivity for ultra-fast breathing response, instant delivery of air on demand and extra-high airflow no matter how cold the water temperature.

First stage

• New XTIS (Extended Thermal Insulating System) with mechanism fully

insulated from the environment, improves cold water/ freezing resistance without

• Key insulation system components visible in blue. • Meets new EN250-2014 standards requirements • Air Balanced Flow-through Piston

(20)

_{PAGE 20}

MK2 EVO

Part number

Description

10.063.000 INT 232 10.063.300 DIN 300

First stage

• New XTIS (Extended Thermal Insulating System-Patent pending) with mechanism fully insulated

from the environment, increasing freezing resistance by 50 %.

• Key insulation system components in blue. • Airflow increased by 15 %

• The larger piston provides better breathing performance and sensitivity, yet the overall body size,

reduced by 3,5 mm, results in a more compact first stage.

MK11

Part number

Description

10.708.000 INT 232 10.708.300 DIN 300

With its chrome plated brass body specially designed to reduce size and weight, the MK11 is an ideal travel companion. The diaphragm system keeps water and pollution out of the main mechanism while balanced technology delivers air promptly at all tank pressures.

REGULATOR COLOR COVERS

Part number

Description

Color

11.602.030P S600 White 11.602.032P S600 Blue 11.602.039P S600 Pink 11.602.033P S600 Red 11.602.034P S600 Yellow 11.360.060P C200 Black 11.361.040P C300 Yellow 11.361.060p C300 Black

(21)

_{PAGE 21}

SUPER COMFORT HIGH FLOW MOUTHPIECE

Part number

Description

01.040.120P Mouthpiece Kit 01.040.120 Mouthpiece, black

The Supercomfort HF mouthpiece is a great addition to any second stage. HF indicates the High Flow offered by the larger bore connection tube, while the longer bite area allows diver to hold the regulator securely with minimal effort and no jaw fatigue.

COLORED MOUTHPIECES AND HOSE PROTECTORS

Part number

Description

Color

01.040.030 KIT MOUTHPIECE + PROTECT SLV BLU Blue 01.040.040 KIT MOUTHPIECE + PROTECT SLV BLU Red 01.040.060 KIT MOUTHPIECE + PROTECT SLV BLU Yellow 01.040.070 KIT MOUTHPIECE + PROTECT SLV BLU Pink 01.040.080 KIT MOUTHPIECE + PROTECT SLV BLU White

OCTOPUS CLIPS

Part number

Description

01.097.137 MAGNETIC HOLDER 01.097.134 OCTOPUS CLIP LIME 01.097.136 OCTOPUS CLIP GREY

• Very strong magnet

• Can be attached to the hose or with ring • Exclusive SCUBAPRO Design

ADAPTERS

Part number

Description

10.760.030 KIT DIN MK25 TITANIUM 300 BARS 10.019.000 YOKE ADAPTER DIN to INT ULTRA LIGHT 10.044.020 KIT DIN MK2 200 BARS

10.044.030 KIT DIN MK2 300 BARS 10.045.020 KIT DIN UNIVERSAL 200 BARS 10.045.030 KIT DIN UNIVERSAL 300 BARS 10.770.020 KIT DIN MK25 TIALLOY 200 BARS

Add more color to your regulator for a totally customized look. Or use the new mouthpiece/hose protection (1st stage) color kits to easily

(22)

_{PAGE 22}

REPAIR-KITS

Part number

Description

10.042.045 MK2 PLUS & MK2 -10.062.031 MK2 PLUS NITROX -10.063.045 MK2 EVO -10.105.045 MK5 -10.721.045 REPAIR KIT MK21 -10.117.045 MK17/19 -10.500.045 MK10 -10.550.045 MK10 PLUS -10.705.045 MK14 -10.707.045 MK11 -10.750.045 MK25/AF/SA/T/MK20/MK25 EVO -10.712.031 MK25 NITROX -10.756.045 MK16/18 (Update -Kit) -11.012.045 D350/400 -11.109.045 G200/ADJ/M50 -11.254.045 S360/S560/S555/600/G250HP/BAL.ADJ/CLASSIC -11.261.045 G250V / G260 -11.300.045 R190/295/380/395/HP -11.650.045 X650 -11.700.045 A700 -21.090.045 Air2 5.GENERATION -21.085.045 AIR2 3/4 GENERATION -21.626.045 REPAIR KIT, B.P.I. -11.361.045 REPAIR KIT C300/C200

-SUPERFLOW HOSES

Part number

Description

01.310.035 1,00 M NITROX 01.309.027 0,56 M 01.310.026 0,65 M 01.309.037 0,75 M 01.309.032N 0,80 M 01.310.037 1,00 M YELLOW 01.309.048 1,20 M 01.309.080 2,10 M 01.300.203 3,00 M 01.300.240 6,00 M 01.300.210 10,00 M 01.300.220 20,00 M 01.309.999 30,00 M 01.309.038 LP HOSE 0,75M W/SWIVEL

(23)

_{PAGE 23}

CONVERSION KITS

Part number

Description

10.116.030 MK16 - MK17 10.500.047 MK10 - MK10 PLUS 10.600.030 MK25 - MK25AF 11.500.070 G500 - S600

11.602.020 S600 METAL BARREL KIT

ACCESSORIES

Part number

Description

10.721.004 Kit Cap MK21 01.010.000 Regulator Necklace 11.101.003 120° elbow

01.040.059 Mouthpiece C/W Clip Clear 01.040.051 Mouthpiece C/W Clip Black 01.040.141 Silicone Mouthpiece Black 01.040.149 Silicone Mouthpiece Clear 01.040.123 Silicone Mouthpiece Junior Clear

01.040.025 Re-Useable Clip In Blister 01.040.131 PVC Mouthpiece Black 01.040.026 Re-Useable Clip Simple 01.088.101 Cable Tie Black 01.040.102 PVC Mouthpiece Blue

11.029.100 Hose Protectors black Twin Pack 11.029.400 Hose Protectors lime Twin Pack 10.700.020 Kit MK20 Din200

10.700.030 Kit MK20 Din300 10.700.010 Kit MK20 Int

10.101.211 Protector, hp, 1st stage 10.101.212 First stage dust cover 01.040.133 Mouthpiece NEW AIR 2

(24)

(25)

COMPUTERS &

INSTRUMENTS

(26)

(27)

_{PAGE 27}

GALILEO UPGRADES

Part number

Description

05.070.002 PMG UPGRADE

05.070.001 HRM Upgrade, incl. Polar Belt

GALILEO SOL

Part number

Description

05.077.100 SOL (with Polar heart rate strap and air transmitter)

05.077.101 SOL (with Polar heart rate strap but no air transmitter)

05.055.020 Galileo gas transmitter only

The Galileo Sol is our ultimate dive computer, with limitless, unique-to-the-industry features.

• ZHL8 ADT MB algorithm • Predictive Multi-Gas (PMG)

• PDIS (Profile Dependent Intermediate Stops) • Nitrox settings 21% to 100%

• Gauge mode • Apnea mode • Altimeter • Active back light • Bookmark function • Easily replaceable battery

• Extra-large dot matrix display and huge memory • Oil-filled technology

• Hoseless Gas Integration with true RBT calculation • Heart Rate Monitor Function

• Full tilt digital compass with bearing memory • Impressive personalization options

• Maximum operating depth: 330m

• Continuously updated average depth display

GALILEO LUNA

Part number

Description

05.076.100 GALILEO LUNA with transmitter 05.076.101 GALILEO LUNA without transmitter

The Galileo LUNA model is everything you need for an extraordinary underwater experience. Luna contains all core SCUBAPRO technology and all features of the Sol except two, which can be added as optional upgrades later Predictive Multi-Gas

(28)

_{PAGE 28}

MERIDIAN BLACK TECH

Part number

05.060.200

Available in a Black Tech version, this computer is not only beautiful and high

performing, but incorporates a PVD (Physical Vapour Deposition) finishing process

applied to the AISI 316L stainless steel body. This finish is accomplished using Titanium Nitride and provides the following advantages:

• 2500HV hardness - anti-scratch effect. • Unaffected by UV rays.

• 100% non-toxic. • High corrosion resistance. • Low friction co-efficient. • Very low magnetic signature.

PVD covers the entire Meridian body, except buttons and the back cover. PVD does not eliminate potential scratches, but it does lessen the likely hood in normal wear.

MERIDIAN

Part number

05.060.100

Use Meridian as a multi-function wrist watch, dive in SCUBA, APNEA or GAUGE modes. Displays are visually clear and easy to navigate. Housing in highest marine grade 316L stainless steel with two-toned brushed finishing, for heavy duty longevity with designer looks.

• ZHL8 ADT MB algorithm • Predictive Multi-Gas (PMG)

• PDIS (Profile Dependent Intermediate Stops) • Nitrox settings 21% to 100%

• Gauge mode • Apnea mode • Altimeter • Active back light • Bookmark function • Easily replaceable battery • Heart Rate Monitor • Full watch functions • Maximum depth rating: 120m

• Continuosly updated average depth display

MERIDIAN ACCESSORIES

Part number

Description

05.060.001 Interface cradle 05.060.004 Polar Heart Rate Belt 05.060.005 Nylon Extension Strap 05.060.003 Nylon Strap 06.204.206 Black strap 05.060.006 Blue strap 05.060.007 Red strap 05.060.008 Orange strap 05.060.009 Yellow strap

Limited stocks available

(29)

_{PAGE 29}

ALADIN SQUARE

Part number

Description

05.040.110 ALADIN SQUARE 05.040.001 Shark USB dongle

A return to our ‘square’ type screen and successor to the iconic Aladin Pro. • Extra-Large digits

• Easy-to-read display design • Double O-ring seals • ZHL8 ADT MB algorithm • Predictive Multi-Gas (PMG)

• PDIS (Profile Dependent Intermediate Stops) • Nitrox settings 21% to 100% with adjustable pp02. • Gauge and Apnea modes

• Altimeter

• Logbook (100 dive hours) • Active back light • Bookmark function • Easily replaceable battery • Optional wired interface “Shark” • Full watch functions

• Maximum operating depth: 120m/360ft • Stopwatch in scuba mode

• Replaceable adhesive film for display protection

CHROMIS

Part number

DESIGNATION

05.061.100 Black 05.061.200 White 05.061.300 Black/Orange

The CHROMIS wrist computer is ready for your next adventure, in or out of the water. Reaching a new level of clarity, the large display and Katana-sharp characters are

proven to be exceptionally readable under water. You’ll have a host of tools at your

fingertips, including a full-featured dive computer, apnea gauge, timepiece, and patented lap counter.

• Easy to read larger digits • ZHL8 ADT MB algorithm • Dual time

• Stopwatch function in SCUBA mode • 120m maximum operating depth • Larger capacity CR2430 battery

• SCUBAPRO engraved SS316L stainless steel front ring and back

• Patented Swimming Stroke counter: counts strokes or kicks and calculates distance • Colors: Black, Orange, White

• Strap extension included • Nitrox settings 21% to 100% • Feed-through push buttons • APNEA and GAUGE modes • USB connection with cradle

usable for everyday

• Logs can be stored and analyzed with a PC/Mac • Alarm clock

(30)

_{PAGE 30}

SCUBAPRO PG DUAL BAR/PSI

Part number

Description

05.023.132 Scubapro Dual PG BAR/PSI 05.022.032 Capsule Scubapro PG dual bar/psi

3 GAUGE INLINE CONSOLE

Part number

Description

05.023.353 Depth gauge, FS2 (2014)

05.014.353 Digital 330, FS2 (2014)

06.204.408 Boot only (2014)

Capturing all gauges below in a new 3 gauge console to get all your dive information at a glance.

• Available with DIGITAL 330 or Standard Depth Gauge 60m (Oil-filled) • Compact Pressure Gauge 0-400 bars (Ø 48mm) with plastic case • FS2 Compass

COMPACT CONSOLE

Part number

Description

28.042.100 Compact console 28.039.302P SPG capsule 28.860.005 DG capsule 28.042.101 Boot only

The 2 most important dive data instruments in a bulletproof, ergonomic and compact console.

• Compact Pressure Gauge 0-400 bars (Ø 48mm) with brass case

• Compact Depth Gauge 70m (Ø 48mm) with Maximum Depth Indicator (Air-filled)

New compact all-metal analogue pressure gauge in new boot. Its dual bar/psi scale makes it ideal for traveling divers and resorts with international clientele.

• Compact pressure gauge 0-400b & 0-6000psi • Red zone between 50 and 0 bar (800 and 0psi) • 150m/492 ft maximum depth

(31)

_{PAGE 31}

COMPACT PRESSURE GAUGE

Part number

Description

28.039.300 Compact SPG 28.039.302P Capsule without hose

Our smallest pressure gauge: extra safety with minimum bulk.

• Compact Pressure Gauge 0-400 bars with brass case • Red zone between 50 and 0 bar and 10 bar increments

DIGITAL 330

Part number

Description

05.014.110 Digital 330m 05.014.010 Capsule only

An original ‘one-of-a-kind’ digital depth gauge. It integrates basic dive information into a highly accurate

and accessible electronic instrument, imperative for all diving levels. The restyled Digital 330m is the perfect evolution of the classic Digital Depth Gauge, which was introduced by UWATEC in 1989. Targeted for technical divers, but also ideal for beginners or as a back up instrument whatever your level, the Digital 330m offers precise accuracy in all diving conditions. Comes in a wrist model or a 3-gauge In-line console.

• Automatic turn on and off • Depth to 330 m

• Maximum depth displayed • Dive time in minutes • Temperature (water and air) • Rate of ascent in M/Min & %

• Surface interval displayed for 24 hours

SURFACE PRESSURE GAUGE

Part number

Description

28.002.000 INT 28.036.200 DIN 200

STANDARD PRESSURE GAUGE

Part number

Description

05.011.112 Std SPG 400 BARS 0°

05.011.113 Std SPG 400 BARS 40°

05.011.012 SPG 400 BARS 0° CAPSULE

05.011.013 SPG 400 BARS 40° CAPSULE

Standard reliable pressure gauge designed for years of regular use.

• Standard Pressure Gauge 0-400 bars (Ø 60mm) with plastic case • Red zone between 50 and 0 bar and 10 bar increments • Available with 0° or 40° oriented dial

(32)

_{PAGE 32}

STANDARD DEPTH GAUGE

Part number

Description

05.011.111 Depth Gauge wrist

Proven depth gauge adapted to every diver, from the beginner to the experienced diver who wants a reliable backup. Depth markings up to 60m.

• Oil-filled analogue depth gauge • Linear Bourbon tube design • Maximum Depth Indicator • High impact resistant nylon case

C1 COMPASS

Part number

05.015.100

A very compact compass for general orientation bearings on recreational dives.

• Quick-connect convenience

• Four main directions clearly indicated: N/E/S/W • Very fast response

FS-2 COMPASS

Part number

Description

05.017.101 FS2 Compass 05.017.121 FS2 Ccompass w/ boot 05.017.001 FS2 Capsule only

05.017.111 FS2 with boot (no retractor)

FS-2 is a universal compass featuring a unique tilt angle of up to 35 degrees, making it easier to read and operate in most any position.

• Functions in both N & S hemispheres • 35° tilt angle

• Oil-filled and sealed

(33)

_{PAGE 33}

INFRARED INTERFACE (IRDA)

Part number

05.050.001

• To connect to a PC that does not have an infrared port

• Plugs into the USB port for quick and simple downloading from your UWATEC dive

computer.

COMPASS LIGHT

Part number

05.017.900

Small module inserts behind a compass, inside the console boot. The diaphragm is activated by water pressure and switches on when diving and automatically switches off once on the surface. This LED has no magnetic signature so perfect for military and professional divers.

ARMSTRAPS

Part number

Description

06.203.027 GALILEO SOL / TERRA / LUNA 06.202.342 FS-1 / FS-2 COMPASS 05.061.002 CHROMIS STRAP BLACK 05.061.003 CHROMIS STRAP WHITE 05.061.004 CHROMIS STRAP ORANGE 06.204.669 CHROMIS LOOP BLACK 06.204.670 CHROMIS LOOP WHITE 06.204.671 CHROMIS LOOP ORANGE 06.204.468 SET ALADIN SQUARE 06.003.201 ALADIN SPORT 06.003.207 ALADIN PRO

06.003.209 ALADIN SPORT PLUS / ULTRA

06.201.851 SMART TEC / Z / PRO / ALADIN TEC / TEC 2G / 2G / PRIME / ONE /

DIGITAL 330 BEFORE 2012 - (STRAP ONLY) 06.201.852 AIR Z / Z NITROX / Z O2 / SMART PRO/Z

06.204.268 ALADIN 2G/PRIME / DIGITAL 330M FROM 2012 - STRAP AND BOOT 06.204.269 ALADIN 2G (STRAP ONLY) FROM 2012

INSTRUMENT BAG

Part number

L

W

H

V

Wg.

Dealer

Retail

53.381.140 7 11.5 15 1.2 0.20 5.00 10.00 Small versatile computer bag protects wrist computers and other valuables.

• Soft protection bag

• Heavy duty PVC (Tarpaulin) fabric • Heavy duty snap closures • Capacity: 0,6L

(34)

_{PAGE 34}

HIGH PRESSURE HOSES

Part number

Description

01.044.008 Pebax - 20 cm 01.044.031 Pebax - 80 cm 01.044.035 Pebax - 90 cm 01.044.039 Pebax - 100 cm 01.044.047 Pebax - 120 cm 06.204.278 HP HOSE 85 cm without QD 06.204.013 HP HOSE 100 cm with QD

05.004.010 Kevlar HP Extension Transmitter - 10 cm 05.004.100 Kevlar - 100 cm

05.004.085 Kevlar - 85cm

05.003.090 Kevlar - 90cm Quick Disconnect, Smart Com/Aladin Air 06.204.279 Kevlar - 100cm AIR/SMART COM w/o coupling

HP SWIVELS & COUPLINGS

Part number

Description

06.007.300 HP SWIVEL PIN - Uwatec

06.007.330 HP SWIVEL PIN-long, Uwatec from ‘04 06.203.548 SWIVEL FOR ATMAFLEX HOSE 28.132.005 HP SWIVEL PIN - SCUBAPRO 01.334.005 High Pressure QD Coupling

BATTERY KIT

Part number

Description

06.202.872 Galileo Sol / Terra / Luna 06.200.265 Old (Pre 95) Aladin

06.201.919 Aladin: Tec / Prime / TEC2G / 2G / One

06.201.920 Galileo Air transmitter (Smart TEC / Smart Z) 1st Generation

06.204.071 Air transmitter Galileo / Smart 2nd Generation 27.730.107 Meridian/Xtender

06.204.470 Battery kit Aladin Square 06.204.286 Chromis Battery

SCREEN PROTECTORS

Part number

Description

06.202.514 Rigid Galileo 06.202.722 3M Galileo 06.004.321 Air z 06.004.323 Smart Com

06.201.853 Smart Z /Smart TEC/Pro Ultra

06.202.927 Aladin:Tec/Prime/TEC 2G/2G 06.202.362 3M Aladin:Tec/Prime/TEC 2G/2G/One 06.204.045 Meridian screen film

06.204.291 Protection film Aladin Square 06.204.290 Protection Film Chromis

(35)

BOUYANCY

COMPENSATORS

(36)

(37)

_{PAGE 37}

X-FORCE

Part number

Size

21.717.100 XS 21.717.200 S 21.717.300 M 21.717.400 L 21.717.500 XL 21.717.600 2XL

X-Force features our pre-formed wrap-around bladder providing higher buoyancy without squeezing when fully inflated. This design offers superior fit and weight distribution. X-Force is more than a powerhouse of features, making it the preferred choice of passionate and advanced recreational divers.

• Super Cinch Tank Band • Fabric: C 1000D / N 420 D • QR Front Weight Integration • Weight Integration Back Trim • 6 stainless steel D-Rings • Airnet Backpack • Knife Grommets • Octopus holder • 2 Zip Pockets

• Fully Adjustable Cummerbund • With BPI

X-BLACK

Part number

Size

21.719.200 S 21.719.300 M 21.719.400 L 21.719.500 XL 21.719.600 2XL

The X-Black features the exclusive AirFlex system, highlighted by the red bungees, that simplifies buoyancy control and guarantees high stability. One of our most feature rich BCs, the X-Black is also one of the most comfortable even when fully inflated thanks to its ergonomic cut.

• Super Cinch Tank Band • Fabric: C 1000D / N 420 D • QR Front Weight Integration • Weight Integration Back Trim • 7 stainless steel D-Rings • Airnet Backpack • Knife Grommets

• QR Rotating Shoulder Buckles • 2 Zipper Pockets

(38)

_{PAGE 38}

BELLA

Part number

Size

22.252.110 XS 22.252.210 S 22.252.310 M 22.252.410 L 22.252.510 XL

The Bella BC is specifically designed and meticulously tailored for the female diver. This high-end front-adjustable jacket has everything a diver want, including a SCUBAPRO-exclusive wraparound air bladder that retains its cradle-like shape even when fully inflated. Bella BC will allow you to experience the most comfortable diving ever.

• Super Cinch Tank Band • Fabric: N 420D/N 420 D • QR Front Weight Integration • Weight Integration Back Trim • 6 stainless steel D-Rings • Padded Back Pack

• QR Rotating Shoulder Buckles • 2 Zip Pockets

Shown with AIR2 (Option)

T-ONE

Part number

Size

21.703.000 2XS 21.703.100 XS 21.703.200 S 21.703.300 M 21.703.400 L 21.703.500 XL 21.703.600 2XL

The design of the T-One makes our most popular rental BC an ideal first purchase when you start diving. We have added features, improving comfort and ease of use, with the still same reliability and outstanding resistance the T-One is well known for. Size color code on both neck and pockets.

• Standard Nylon Band • Fabric: C 1000D/N 420 D • 2 stainless steel D-Rings • Padded Back Pack • 2 Velcro Pockets • Octopus Holder • With BPI

X-ONE with optional weight pockets

Part number

Size

21.724.100 XS 21.724.200 S 21.724.300 M 21.724.400 L 21.724.500 XL 21.724.600 2XL

The X-One fits the needs of divers looking for a simple and feature-rich BC. Based on

the same reliable bladder as the T-One,it is offered without weight pockets (which can be purchased as an option part number 23.107.010). X-One is an ideal

all-rounder BC or for rental use when weight integration is required. Size color code on both neck and pockets.

• Standard Nylon Band • Fabric: C 1000D/N 420 D • 2 stainless steel D-Rings • Padded Back Pack • Knife Grommets • 2 Velcro Pockets • Octopus Holder

• QR Front Weight Integration (optional) (Weightpocket with no. 23.107.010) • With BPI

(39)

_{PAGE 39}

LITEHAWK

Part number

Size

22.220.151 XS/S 22.220.351 M/L 22.220.551 XL/2XL

• Divers get the benefits of back flotation in this super lightweight BC made for easy

traveling.

• Low-drag, low profile progressively-shaped air cell on a light back flotation BC • Elastic cords automatically control the size and keep the air cell streamlined when

partially inflated

• Constructed in durable 1000 Denier Nylon for long life wear • Adjustable belt-style waist strap with Nylon lightweight buckle • Lightweight, perfect for travel: just 2,36 kg

• Optional accessory quick-release weight pockets • Balanced Power Inflator

SEAHAWK

Part number

Size

22.140.210 S 22.140.310 M 22.140.410 L 22.140.510 XL 22.140.610 2XL

A dynamic, comfortable back flotation jacket. The Seahawk allows excellent freedom of movement, while still providing adequate storage with traditional cargo pockets.

• Super Cinch Tank Band • Fabric: N 1000D / N 420 D • QR Front Weight Integration • 6 stainless steel D-Rings • Padded Back Pack • Knife Grommets

• QR Rotating Shoulder Buckles • 2 Zip Pockets

• Fully Adjustable Cummerbund Shown with AIR2 (Option)

EQUATOR

Part number

Size

21.725.100 XS 21.725.200 S 21.725.300 M 21.725.400 L 21.725.500 XL

This bullet proof jacket should not be limited to travel diving. The comfort and technical features will convince you to use it in all your dive adventures

• Easy-to fold small back pack for lightweight travel • Water draining Airnet back padding for super comfort

• Includes SCUBAPRO BPI inflator, corrugated hose, elbow and low profile dump valves using the

latest technology for full safety and comfort.

• Tank Band with redesigned double tank straps, lightweight plastic buckle and easy-insert

webbing.

• Fabric: Nylon 420 D

• Integrated weight pockets with low-profile buckles • 6 stainless steel D-Rings

• Knife Grommets

• QR Rotating Shoulder Buckles • 2 Zipper Pockets

• Soft neck finishing

• Octopus pockets on both sides • With BPI

(40)

_{PAGE 40}

MASTER JACKET

Part number

Size

21.181.200 S 21.181.300 M 21.181.400 L 21.181.500 XL 21.181.600 2XL

The Master Jacket has been certified as a Combined Buoyancy and Rescue Device thanks to its lift capacity and the “face up” body position at the surface. It is the

stabilizing jacket choice of commercial, military, instructors and advanced divers needing intensive use, precise buoyancy control and comfort.

• Super Cinch Tank Band • Fabric: Polyester / Soltane • 4 Stainless steel D-Rings • Padded Back Pack • 2 Velcro Pockets • With BPI

BPI

Part number

Description

21.610.000 BPI + hose (after 2013)

21.600.100 BPI + hose (before 2013)

21.610.002 BPI only (after 2013)

21.622.001 BPI only (before 2013)

21.080.626 Adapter AIR2 Hose to BPI 21.626.045 BPI Repair Kit

The Balanced Power Inflator has a streamlined and ergonomic design. The inflation button is easy to locate and requires little effort. A soft mouthpiece has been added.

The corrugated hose features a new, easier to use SQAP (Safe and Quick Air Pin)

lever and a connection between hose and elbow valve.

BC ACCESSORY KIT

Part number

23.120.000

The perfect BC accessories for safer diving

• Nova 200, Led Light • White TIP BC knife • Retractor with stop

(41)

_{PAGE 41}

BCD ACCESSORIES

Part number

Description

21.558.020 Safety strap BCD 21.567.004 Whistle

20.135.005 Super cinch band, short 23.073.010 Cinch band (pair) T-One / X ONE

20.140.000 Complete back pack 7/18L T-ONE/T-SPORT PLUS 21.009.006 Air 2 QD

21.080.626 Adapter Air2 hose to BPI 21.626.013 LP hose QD coupling 40.978.000 Peebax blow gun 20.134.003 Buckle cinch band 21.200.003 Bcd dump valve 21.200.017 Bcd dump valve wo cable 21.200.217 Pull dump system Long

23.704.000 Weight pocket Bella/Equator/Ladyhawk/Seahawk/Go/GlideX 23.702.000 Weight pocket LADYHAWK/KNIGHTHAWK - 5 kg (XS-S)

23.703.000 Weight pocket LADYHAWK/KNIGHTHAWK - 6 kg (M-XXL)

23.705.000 Weight pouch 12 lb 1-1/2 inch buckle-SEAHAWK 23.107.010 Weight pocket kit X-ONE, X-Black, X-Force (pair)

23.107.001 Weight pocket T & X Series 01.080.401 D-RING, ADJ, TRAPEZOIDAL

LIFT CAPACITY

NEWTONS - LBS

XXS XS S M L XL XXL

FRONT ADJUSTABLE

N LBS N LBS N LBS N LBS N LBS N LBS N LBS MAX TANK _CAPACITY

X-BLACK 110 24.7 140 31.5 180 40.5 200 44.9 230 51.7 250 56.2 15 L X-FORCE 110 24.7 140 31.5 180 40.5 200 44.9 230 51.7 250 56.2 _{18 L - M-XXL}15 L - XS/S X-ONE 110 24.7 140 31.5 170 38.2 180 40.5 210 47.2 230 51.7 _{18 L - M-XXL}15 L - XS/S T-ONE 90 20.2 110 24.7 140 31.5 170 38.2 180 40.5 210 47.2 230 51.7 _{18 L - M-XXL}15 L - XXS-S BELLA 100 22.5 120 27.0 140 31.5 160 36.0 190 42.7 15 L - S-M10 L - XS 18L - L-XL EQUATOR 100 22.5 120 27.0 130 29.2 150 33.7 170 38.2 _{15 L - S-XL}10 L - XS BACK FLOATATION SEAHAWK 240 54 240 54 240 54 240 54 240 54 18 L LITEHAWK 150 33.7 200 44.9 200 44.9 200 44.9 200 44.9 18 L STABILIZING MASTER JACKET 200 44.9 220 49.5 230 51.7 250 56.2 250 56.2 10 L +10 L

(42)

(43)

(44)

(45)

_{PAGE 45}

X-TEK COMFORT SYSTEM

Part number

22.190.010

• Horseshoe (HS) Wing, 27kg lift capacity • 1680 DEN Ballistic Nylon outer shell • 420 DEN Nylon inner bladder • Stainless Steel back plate

• Three-piece Comfort-Harness-System with padded shoulders and back pack for the

ultimate in comfort

• Quick release buckles on both left and right shoulders for easy removal • Convertible to single cylinder too

• Anatomically optimized back padding

• Adjustable shoulder straps for snug individual fit • 50mm crotch strap with two stainless steel D-rings • Heavy duty dedicated tech diving inflator • Without single tank adapter

X-TEK PURE TEK SYSTEM

Part number

Description

22.195.010 13Kg 22.188.010 18 Kg 22.189.010 27 Kg

• Donut Wing with 18 or 27kg lift capacity • Donut Wing with 27kg lift capacity for twin tanks • 1680 DEN Ballistic Nylon outer shell

• 420 DEN Nylon inner bladder • Stainless Steel back plate

• Continuous harness with stainless steel back plate for best stability when using

twin cylinders

• Two shoulder D-rings and one waist stainless steel D-ring on the left side • 50mm wide crotch strap with two stainless steel D-rings

• With X-Tek single tank adapter with two super cinch straps (not 27kg) • Bladder includes crotch strap

• Heavy duty dedicated tech diving inflator • Padded backpack: 13kg & 18kg

• Stainless steel backpack: 27kg

• Includes a single tank adapter as standard

SIDEMOUNT

Part number

Description

21.726.001 Harness only 21.726.400 Wing only (20kg/45lbs/200N) 21.726.200 Wing only (12kg/25lbs/120N) 21.726.117 Cover

Sidemount diving was originally conceived as a specific cave diving layout, allowing better

maneuverability in small spaces. Side-mount diving has now become widespread. SCUBAPRO’s

modular design and compact independent air cell, developed in coordination with leading side-mount cave divers, is available in two sizes. It provides guaranteed quality and a configuration for

every diver’s needs. • Modular approach

• Compact independent aircell

• Aircell size: 20 liters lift (45lbs/200 Newtons) & 12 liters lift (25lbs/120 Newtons) • Soft Airnet finished backpack

• Compatible with current X-TEK Steel and aluminum back plates • Stainless steel grommets, D-rings and handles

• New Dump valve, corrugated hose and BPI • Specific streamlined elbow

• Bungee and hooks for tank support • Fully adjustable, easy to wear and configure • Side bungees for streamlined shape

• Optional top cover for total streamlining and increased durability • Wing includes crotch strap

(46)

_{PAGE 46}

X-TEK PRO SYSTEM XTREME

Part number

Description

22.192.010 40 kg 22.191.010 27 Kg

Same as X-TEK Pro System Twin Cylinders, but with added lift capacity.

• Horseshoe (HS) Wing with 40kg lift capacity • 1680 DEN Ballistic Nylon outer shell • Two 420 DEN Nylon inner bladders • Stainless Steel back plate

• Pro-Harness system with one left QR-buckle ,constructed of 50mm Ballistic webbing

for maximum strength and with padded shoulders for better support and comfort

• With concealed storage pack for SMB‘s and lift bags • Padded shoulder straps with two stainless steel D-rings • 50mm crotch strap with two stainless steel D-rings • Heavy duty dedicated tech diving inflators(2) • Without single tank adapter

X-TEK HS WING

Part number

Description

22.194.010 27 kg D.I.R. w/o Bungee 22.185.010 27 kg

• Horseshoe Wing

• 1680 DEN Ballistic Nylon outer shell • 420 DEN Nylon inner bladder • SCUBAPRO B.P.I.

• Bungee-System for minimum drag • Available with 27 kg lift capacity

X-TEK DONUT WING

Part number

Description

22.193.010 13 kg 22.183.010 18 kg 22.184.010 27 kg

• Provides unprecedented buoyancy control regardless of diving position. • 1680 DEN Ballistic Nylon outer shell

• 420 DEN Nylon inner bladder • SCUBAPRO B.P.I.

• Available with 13, 18 or 27 kg lift capacity

X-TEK HS WING TWIN

Part number

Description

22.187.010 40 kg 22.186.010 27 kg

• Horseshoe Wing

• 1680 DEN Ballistic Nylon outer shell • Two 420 DEN Nylon inner bladders • SCUBAPRO B.P.I.

• Bungee-System for minimum drag • Available with 27 kg or 40 kg lift capacity.

(47)

_{PAGE 47}

X-TEK FORM HARNESS

Part number

Description

23.806.000 Harness w/o backplate, w/o crotch strap 22.182.000 Complete harness

• Stainless steel back plate

• Tri-compound Comfort-Harness-System • Anatomically optimized back padding

• Adjustable shoulder straps in length and alignment • 50 mm Crotch Strap with two stainless steel D-rings • Optionally equipped with QR-weight system

X-TEK PRO TEK HARNESS

Part number

Description

23.805.000 Harness w/o backplate, w/o crotch strap 22.180.000 Harness complete

• Stainless Steel back plate

• Pro-Harness-System with QR-buckle

• Padded shoulder straps with two stainless steel D-rings • 50mm crotch straps with two stainless steel D-rings • Back plate storage pack to fix a buoy

X-TEK PURE TEK HARNESS

Part number

Description

23.804.000 Harness w/o backplate w/o crotch strap 22.179.000 Harness complete

• Stainless Steel back plate • Secure continuous webbing • Stainless steel waist buckle

• Two shoulder D-rings and one left D-ring on the waist belt • Adjustable 50 mm crotch strap with two stainless steel D-rings

X-TEK BACKPLATE

Part number

Description

23.801.000 Aluminium 23.800.000 Stainless steel

• This backplate features optimized stability

• Ergonomic shape for maximum comfort and eliminates back stress on extended dives • Numerous options on where to attach storage pack and additional various accessories • Available in Stainless Steel (2.4kg) or in Aluminium (0.9kg), perfect for travel

(48)

_{PAGE 48}

X-TEK SINGLE TANK ADAPTER

Part number

23.802.000

• Attaches assembly point to extend the stainless steel back plate for dives with

single tanks.

• Includes two SCUBAPRO Super-Cinch straps for optimal tank attachment

SOFT TRAVEL BACKPLATE

Part number

23.807.000

• For Comfort Harness, attaches to backplate includes 2 Super Cinch straps

X-TEK QR-WEIGHT POCKET

Part number

Description

23.803.000 Pair

• Weight pocket system with QR-buckle for divers seeking releasable weight pockets

for their BC System

X-TEK SHOULDER PADS

Part number

Description

(49)

_{PAGE 49}

SURFACE MARKER BUOY POUCH

Part number

23.817.000

• Pouch to accommodate surface markers, fits on all X-TEK HS wings • Easy to reach and comfortable to use in every position

• Size adjusts with bungee cord

X-TEK BACKPLATE STORAGE PACK

Part number

23.808.000

• Storage pack attaches to plate (plate sold seperately) • Includes screws

X-TEK COUNTER WEIGHT POCKETS

Part number

Description

23.812.000 Pair

• Tank or waist band mounted trim weight pockets for optimal weight distribution and

in-water stability

• Accommodates 1kg of lead weight

X-TEK ACCESSORY POCKETS

Part number

Description

23.810.000 Small 23.811.000 Large

• Optional accessory pouch for the harness waist band

• Two inner compartments with internal D-ring to secure accessories • Available in two sizes

X-TEK INFLATOR

Part number

23.813.000

(50)

_{PAGE 50}

X-TEK CROTCH STRAP

Part number

23.818.000

• 50mm width, attaches to all backplates • Complete with 2 stainless steel D-rings

X-TEK SCREW SET

Part number

Description

01.108.102 M6/14mm x2 01.108.202 M6/09mm x2 01.108.402 M8 Washer

STAINLESS STEEL SNAPS

Part number

Description

01.030.090 Double ender - 90mm 01.030.100 Double ender - 100mm 01.031.010 Swivel 10/64 01.031.013 Swivel 13/76 01.031.019 Swivel 19/92 01.031.025 Swivel 25/96 01.032.032 Swivel (round eyelet) 32/122

• Stainless steel snaps AISI 316 for securing accessories and stage tanks • Available in various sizes in double-end and swivel versions

STAINLESS STEEL BANDS

Part number

Description

23.814.000 140mm 23.815.000 171mm 23.816.000 204mm

• Stainless steel bands for the assembly of twin tanks

• 50mm wide, double reinforcement at the fixing point, laser etched SCUBAPRO logo • Available for 2 x 140mm, 2 x 171mm or 2 x 204mm tanks

(51)

_{PAGE 51}

2 0 1 5

SUITS, BOOTS &

GLOVES

(52)

(53)

_{PAGE 53}

EVERTEC LT

Part number

Size

60.848.200 S 60.848.300 M 60.848.400 L 60.848.500 XL 60.848.600 2XL 60.848.700 3XL

This is a light weight tri-laminated drysuit. Constructed in rip-stop fabric, which is 25% lighter than traditional and contains slight stretch for better flexibility. Evertec LT maintains heavy duty features and balance between comfort and robustness.

• Lightweight ripstop material • Tizip masterseal zipper • Durable yet soft Kevlar kneepad

• Socks without heel seam to have less sizing issues • Si-Tech Valves

• Front diagonal zipper • 2x Pockets

• Telescopic Torso • Removable Suspenders

EVERTEC LT ACCESSORIES

Part number

Size

HOOD

67.040.200 S 67.040.300 M 67.040.400 L 67.040.500 XL 67.040.600 2XL

SOCK - MAN

60.848.205 S 60.848.305 M 60.848.405 L 60.848.605 XL/2XL 60.848.705 3XL

SOCK -WOMAN

60.849.205 S 60.849.305 M 60.849.505 L/XL

SUSPENDERS

60.842.000 S-L 60.842.500 XL-3XL

(54)

_{PAGE 54}

CLIMASPHERE

Part number

Size

78.107.100 XS 78.107.200 S 78.107.300 M 78.107.400 L 78.107.500 XL 78.107.600 2XL 78.107.700 3XL

Complete thermal protection in a low profile 2-piece undersuit for versatile insulation. Breathable and windproof in four-way stretch fleece for comfort and flexibility. Neoprene wrist and ankle cuffs with thumb loops and stirrups for easy to wear added warmth and protection.

• Two-piece - always the right heat insulation everywhere

• Soft windproof, breathable 4-way stretch fleece material (430g/m2) • A lean and clever cut

• Neoprene arm and leg cuffs • Compact and easy to transport

EVERDRY 4

Part number

Size

MAN

60.851.200 S 60.851.300 M 60.851.320 MT 60.851.350 MR 60.851.375 MB 60.851.400 L 60.851.450 LR 60.851.475 LB 60.851.500 XL 60.851.550 XLR 60.851.575 XLB 60.851.600 2XL 60.851.700 3XL

WOMAN

60.861.000 2XS 60.861.100 XS 60.861.200 S 60.861.300 M 60.861.400 L 60.861.500 XL

Made of 4 mm thick high-density neoprene, Everdry 4 is comfortable like a wetsuit, but as a drysuit, keeps you warm and water tight.

• Si-Tech Valves

• Attached Neoprene Socks • 2x I-Safe Straps

• Flex Seals • Dry Back Zip

• Everflex or Flexible Panels • 4 mm Neoprene Thickness • Removable Suspenders • 1x Pocket

(55)

_{PAGE 55}

CLIMATEC

Part number

Size

78.103.100 XS 78.103.200 S 78.103.300 M 78.103.400 L 78.103.500 XL 78.103.600 2XL

The perfect complement to the Everdry 4 and all drysuits

• Lightweight, water-repellent, breathable, 2-layer soft material • Ankle stirrups and thumb loops

NOVA SCOTIA 7.5mm

Part number

SIZE

MAN

63.296.200 S 63.296.300 M 63.296.320 MT 63.296.400 L 63.296.500 XL 63.296.600 2XL 63.296.700 3XL

WOMAN

63.297.100 XS 63.297.200 S 63.297.300 M 63.297.400 L 63.297.500 XL

New Nova Scotia semidry suits are now in 7,5mm water repellent Everflex neoprene with Diamond span water draining, insulating interior, resulting in a CE certified Class A thermal protection suit for total warmth and comfort. Additional new and improved features now make this suit incomparably superior in cold water and multi-dive protection.

• New 7.5 Everflex Neoprene thickness passes highest possible CE Class A certification • X-Foam formula neoprene for better health

• Pure Design Concept, with fewer seams and panels for maximum stretch capacity and

updated graphics and styling.

• New 100% water repellent Everflex neoprene

• New all Diamond Span water draining interior layer, insulating almost the entire suit. • Ankles & wrists with double seal zipper

• Semi-dry zipper provides an excellent dry seal against water entry and less rigid,

increased wearing comfort.

• Improved I-Safe computer safety straps on both wrists, keep instruments attached even

with compression.

• Improved protective spine pad

• Anti-abrasion Powertex material on shoulders, back & seat • Right thigh 3D pocket with hood attachment hook • Shoulder and knee pad protection

(56)

_{PAGE 56}

EVERFLEX HOODED FRONT ZIP 7/5mm

Part number

Size

MAN

63.371.200 S 63.371.300 M 63.371.320 MT 63.371.350 MR 63.371.400 L 63.371.450 LR 63.371.500 XL 63.371.550 XLR 63.371.600 XXL

WOMAN

63.372.100 XS 63.372.200 S 63.372.300 M 63.372.400 L 63.372.500 XL

This 100% Everflex 7mm hooded steamer is for cold water dives and includes all the great features of our classic Everflex, and more. The Shoulder-to-Shoulder front zipper makes it easy to put on and take off without buddy help. The attached hood and face seal provide extraordinary cold water protection. Durable Power Seam Technology strengthens and protects stitching.

• Everflex • Ankle Zips • Glideskin

• Heliospan Torso Lining • Tatex Kneepads • Powertex • Front Zip • Preformed Design • 2x I-Safe Straps • Lumbar Pad

EVERFLEX JACKET 6/5mm

Part number

Size

MAN

63.383.200 S 63.383.300 M 63.383.320 MT 63.383.400 L 63.383.500 XL 63.383.600 XXL

WOMAN

63.386.100 XS 63.386.200 S 63.386.300 M 63.386.400 L 63.386.500 XL

Everflex Jacket with hood in 6/5mm, for added warmth, in both men & ladies sizes. • Everflex

• Powertex • Front Zip • Preformed Design