Quality Management Systems & Certification Consulting

Loading....

Loading....

Loading....

Loading....

Loading....

Full text

(1)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

© 2004 T.I.E.C., Inc. All Rights Reserved.

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability

• Limit Legal Liability

• Improve Efficiency of Operations

• Continually Improve All Processes

• Reduction of Waste & Reworks

• Manage Risk & Control Change

• Tangible, Monetary Savings

• International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

© 2004 T.I.E.C., Inc. All Rights Reserved.

Consulting Services

• Quality Management Systems

• API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing

(2)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

Inspection Services

Texas International Engineering Consultants (TIEC, Inc.) Inspection Services has a global vast array of knowledge in not only the Oil and Gas industry, but also in shipbuilding, aerospace and structural inspection. With over 150+ years of industry experience, we provide independent, reliable, and cost-effective services that help reduce risk, ensure safety, enhance product quality and value rapport for your company. We provide global inspection services through our extensive network across our global branches.

Third-Party Inspection (TPI) Service

TIEC offers Third-Party Inspection (TPI) services to ensure vendors or

subcontractors comply with specified requirements. These services

include:

•Raw Material Identification/Verification

•In-Process & Final Inspection

•Witnessing Performance Tests and Non-Destructive Examination (NDE) Methods

•Qualification of Processes, Procedures, and Personnel

•Pre-Shipment Inspection

•Supplier Surveys

•Source Inspection

AWS Certified Welding Inspectors (CWI)

TIEC has AWS Certified Welding Inspectors (CWI) available to ensure compliance of the relevant code, specification and/or standard. The CWI services include:

• Verify that applicable procedures, materials, and equipment are correct

•Ensure welders are appropriately qualified

•Review or develop WPS/PQR’s

•Perform visual examination

•Ensure that all inspections are completed to applicable specifications

Drilling Rig and Well-Servicing Structure Inspection Services

TIEC offers Drilling Rig and Well-Servicing Structure Inspection Services compliant with the American Petroleum Institute (API) requirements or to other customer specified standards. These services are available for onshore and offshore operations, domestic or internationally, which include:

•Inspection of Drilling Rig and related equipment (mechanical and/or electrical)

•Commissioning or Acceptance Testing of new or refurbished rigs

•API RP 4G Category 1,2,3, or 4 inspection levels

•Comprehensive assessment of the rig and related equipment includes a technical report with recommendations for improvement of the maintenance program 480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 For more information visit our web site: www.tiec.com

Benefits of Inspecting

By detecting deviations from standard specifications in the manufacturing phase, companies can:

• Ensure production forecast and effectively lower cost

• Ensure standardized of quality & quantity of products ordered

• Cut costs thru product verification • Accurately assess production times • Monitor compliance of standards,

procedures and specifications • Provide accurate and timely reporting • Supply skilled & competent inspectors

(3)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

© 2004 T.I.E.C., Inc. All Rights Reserved.

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

Training

Texas International Engineering Consultants (TIEC, Inc.) offers various training courses intended to enhance quality and technical related knowledge. Training courses are available on Quality, Safety, Environmental and many other topics. All of our courses are conducted by qualified and competent TIEC staff members, or third-party training professionals, with specific credentials applicable to his/her field of study.

TIEC public training courses held at our corporate headquarters located in Houston, Texas, and are conducted at our private training facility known as the “Houston Training and Conference Center”. Our facility features 4 unique rooms with a combined total of 4,270 square feet of event space which can accommodate a variety of traditional or customized room configuration styles. Each room is equipped with its own built-in audio visual features to create the perfect learning environment for any training event.

TIEC offers customized training which can be provided on-site at your facility or arranged at our Houston Training and Conference Center. TIEC courses can be customized to fit your organizational needs and delivered at your convenience. The on-site training can reduce your costs by eliminating travel and lodging expenses and by consolidating attendees from multiple facilities.

Benefits of Training

Training is beneficial for both the organization and the employee; it is an investment that can improve business performance, profit and morale.

For employers, training can result in: •

• • •

Better customer service Better work safety practices Productivity improvements

Reduction in employee turnover leading to a reduction in the cost of employee replacement Flexibility and efficiency by cross-training employees

For employees, individuals benefit by: •

• • •

Acquiring new skills

Keeping up to date in new and different tasks Building self-esteem

Increased job satisfaction by setting and reaching long-term career goals

Increased chance to obtain a better position or better pay within the organization

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 For more information visit our web site: www.tiec.com

Training Courses

• Quality Training (API Spec. Q1, Q2, ISO 9001)

• Environmental Training (ISO 14001)

• Safety Training (OHSAS 18001)

• Internal Auditor Training

• Welding Inspection Training

• Risk Management Training

• SEMS Lead Auditor Training

(4)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

Texas International Engineering Consultants (TIEC, Inc.) audits and assessments are tailored to each client’s needs, requirements, standards, products and/or services to ensure the client’s organization achieves compliance, certification, licensing or approval.

Internal, Supplier and HSE Audits

Internal Audits

TIEC‘s certified auditors can perform your required internal audits to ensure continual improvement, as well as compliance to approved standards. Our certified auditors have the auditing experience along with the technical expertise to optimize the Quality Management System review. The qualified specialists TIEC employs have audited and assessed quality systems at facilities employing from twelve to more than thirty-thousand workers.

Supplier/Vendor Audits and Surveillance

TIEC can assess manufacturing and quality capabilities to ensure that suppliers meet your requirements and maintain quality standards by verifying that equipment and materials conform to contractual specifications. Depending on your needs, this analyst will probe the firm’s experience, technical resources, production capacity, quality control procedures, measures and systems.

Health, Safety and Environmental Audits

• Integrated Health, Safety, Environmental & Quality Systems

Environmental Management Systems (ISO 14001) Occupational Health and Safety Management Systems (OHSAS 18001)

Safety and Environmental Management Systems (SEMS-US 30CFR250.1900)

Process Safety Management Systems Contractor HSSE Program Auditing

Regulatory Compliance Auditing, including; Protocol Development • • • • • •

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

(5)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

© 2004 T.I.E.C., Inc. All Rights Reserved.

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

Health, Safety and Environmental Services

Implementing a Health, Safety and Environmental Auditing program serves to validate regulatory compliance, as well as conformance with internal requirements, and provide a structure to minimize risk to workers and the environment.

A functioning HSE management system serves to protect workers and the environment, which can have a positive economic benefit in reduced insurance premiums, and worker’s compensation claims, as well as reduced liability for both injuries and environmental events.

Due diligence reviews will help operators assess the hidden cost of acquisitions and validate the sales price of existing assets.

Incident investigations provide a method of identifying corrective actions to immediately address root causes, as well as implementation of preventive actions to stop a recurrence of a similar event.

HSE Auditing

TIEC can provide auditing for onshore / offshore operations and drilling, including:

• Regulatory Compliance (OSHA, EPA, DOT, USCG, BSEE) Process Safety Management Systems (PSM)

Safety and Environmental Management Systems (SEMS) Contractor HSE Management Systems

Environmental Management Systems to ISO 14001 Occupational Health and Safety Systems to OHSAS 18001

Integrated HSE Management Systems

Our trained personnel conduct document reviews, interviews and site visits as a part of the auditing process. Written, confidential reporting, including observations and recommendations on remedying issues identified in the audit process.

HSE Consulting

HSE Program Development

TIEC can assist in the development of complete Health, Safety and Environmental (HSE) Systems. This can consist of:

TIEC‘s personnel can perform:

• • • • • • •

Process Hazards Analyses (PHAs) SEMS Consulting

Regulatory Consulting

Integrated Hazards Analyses (IHAZID) Due Diligence Reviews

Incident Investigations Basic Risk Analyses

• • • • • •

Internal HSE Management Systems

Process Safety Management Systems (PSM)

Safety and Environmental Management Systems (SEMS) Environmental Management Systems to ISO 14001 Safety Management Systems to OHSAS 18001 Tailored Safety Manuals

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 For more information visit our web site: www.tiec.com

• • • • •

(6)

Quality Management Systems & Certification Consulting

A Quality Management System (QMS) is a systematic way of monitoring and

controlling the essential activities of your business, to continually improve products, processes, efficiency and personnel.

Texas International Engineering Consultants (TIEC, Inc.) provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with theAmerican Petroleum Institute (API), theAmerican Society of Mechanical Engineers (ASME) and the International Organization for Standardization (ISO) requirements, typically leading to receipt of API Monogram Licenses, ISO Certification and ASME Code Stamps. These services include the development of manuals, procedures, work instructions, forms, objectives, and reports; establishing implementation strategies; training of client personnel, preforming internal audits, and assistance during certification audits. TIEC will develop a Quality System specifically tailored to your operations. In order to ensure system continuity with minimum disruption to daily business activities, TIEC will include the procedures, methods, and technologies currently in use by your company to the maximum extent possible. TIEC provides client organizations assistance and support in developing strategies for correcting nonconforming conditions and resolving problems with certification bodies, customer conflicts, product deficiencies, supplier/vendor evaluations, and product design services.

Benefits of Certification

• Prevent & Reduce Non-Productive Time (NPT)

• Improve Service Competency, Performance & Operations Reliability • Limit Legal Liability

• Improve Efficiency of Operations • Continually Improve All Processes • Reduction of Waste & Reworks • Manage Risk & Control Change • Tangible, Monetary Savings • International Recognition

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 www.tiec.com

Consulting Services

• Quality Management Systems • API Specification Q1 & Q2 • ISO • ASME • Integrated QMS • QA/QC Support • QMS Development • QMS Maintenance

• Preparation for Certification & Licensing • Risk Management

TIEC provides services for product design and analysis, development of welding procedures, qualification of welders, assistance in equipment purchases, troubleshooting, failure analysis and technical writing. TIEC often performs the functions of a QA/QC/Technical Services Department for clients, providing a professional, cost effective alternative to full-time personnel without costly overhead burdens. TIEC provides services to investigate and resolve customer claims, particularly those that involve compliancy to specified product or service requirements.

Texas International Engineering Consultants (TIEC, Inc.) quality plans are individually developed for manufactured products to provide critical controls to ensure specified requirements are met.

A Project Manager will oversee the execution of your project's scope, quality, time and cost. Qualified personnel are assigned to perform monitoring and witnessing of critical inspections, tests, installations, and operations. They can also evaluate vendor qualifications and capabilities to specification and code.

Project Management includes developing a project plan that defines project goals and objectives, which also specifies how tasks and goals will be achieved. Documents such as, resources, budgets and timelines for completion are requested for adequate implementation. Quality plans are individually developed for manufactured products and/or servicing to provide critical controls to ensure specified requirements are met. These can include witnessing of critical inspections, tests, installations, commissioning of products and operations.

480 N. Sam Houston Pkwy E. Suite 270 Houston, Texas 77060

Phone: 281-448-8432 • Fax: 281-448-1112 Regus JTC Summit #24-03 8 Jurong Town Hall RoadSingapore 0609434 • Tel: +65 6818 0868 For more information visit our web site: www.tiec.com

Project Management Services

• Quality Management Systems

• Auditing (Supplier/Vendor, Internal, HSE) • Health, Safety & Environmental

• Risk Management • Inspections

• Maintenance Training

Project Management Consulting

Process Integration

Customer Claims and

Complaint Investigations

TIEC offers a number of services, which can be customized to fit any customer’s needs. A diligent response to customer complaints can lead to a decrease of overall objections and result in an increase of customer satisfaction.

Full-Service Technical Support

(7)

Worldwide Technical

and

Quality Solutions

www.tiec.com

281-448-8432

Mr. Ed Durante, the company president, is an engineering professional with over 40 years of experience in project management, engineering, quality assurance, training, and auditing in the nuclear, petroleum, industrial construction and manufacturing industries.

He has worked for over 30 years with the American Petroleum Institute’s (API) Standardization Committees, serving as a member of the API Committee on Quality, Chairman of the API Subcommittee on Auditor Training and Qualification, Chairman of the joint API and ISO Workgroup responsible for developing API Q1 8th Edition/ ISO TS 29001; member of the SC 18 for 30 years; worked on development of API Q1 and Q2 since their inception; and an experienced API Lead Auditor. Mr. Durante is a former API Master Trainer and has presented API Training programs on behalf of API worldwide for over 18 years. Currently, he is Chairman of the API Task Group for Improvements to the API Monogram Program, with over 35 years of experience in developing Quality Management Systems worldwide.

Texas International Engineering Consultants (TIEC, Inc.) is dedicated to delivering services customized to fit our client’s needs. With well over 300 combined years of experience, we provide a hands-on approach to ensure our client receives practical, cost effective, real-world training, consulting and auditing services.

TIEC provides assistance in the development, implementation and maintenance of Quality Management Systems in compliance with industry standards (API, ISO, ASME, AS) leading to system certification and/or product licensing. TIEC has extensive international experience working with large and small manufacturing and service companies worldwide. We utilize this multi-cultural experience to assist our clients in promoting their products and services in today’s global market. TIEC was established in 2000 to provide training, consulting, auditing and special processes qualification, for the development and improvement of Quality Management Systems. Additionally, TIEC offers customized training for quality, safety, environmental and many other topics.

© 2004 T.I.E.C., Inc. All Rights Reserved.

About TIEC

Ed Durante President

Executive

Management

www.tiec.com

480 N. Sam Houston Pkwy. E. • Suite 270

Houston, Texas 77060 281-448-8432 • Fax: 281-448-1112

Regus JTC Summit #24-03

8 Jurong Town Hall Road Singapore 0609434 Singapore Tel. +65 6818 868

(8)

What is a Quality

Management System?

A Quality Management System (QMS) is a systematic way of monitoring and controlling the essential activities of a business. The development of a Quality Management System starts with a defining of the company organizational structure, responsibilities, procedures and resources needed to achieve a quality product or service. Once defined, this becomes the benchmark for management to measure and verify compliance to the necessary conditions to ensure quality and continual improvement.

Inspection Services

• Third Party Inspection • Rig Inspection

• Certified Weld Inspection (CWI) • QA/QC Support

• Source Inspection • Dimensional Testing

• Non-Destructive Testing (NDT) • Customer Representation (Witness)

Certification Consulting

Services

• Quality Management Systems • American Petroleum Institute (API)

Spec. Q1, Q2

• International Organization of Standardization (ISO)

• American Society of Mechanical Engineers (ASME) • Integrated QMS

• Internal Audits

• Supplier/Vendor Audits • QA/QC Support

• QMS Development & Maintenance • Preparation for Certification & Licensing • Risk Management

Training

• Quality Training (API Spec. Q1, Q2, ISO 9001) • Environmental Training (ISO 14001)

• Safety Training (OHSAS 18001) • Internal Auditor Training • Risk Management Training • Weld Inspection Training • SEMS Lead Auditor Training • Customized & On-Site Training • Conference & Training Center

Benefits of Certification

There are many benefits of a Quality Management System Certification, such as:

Prevent & Reduce Non-Productive Time (NPT) Improve Service Competency,

Performance & Operations Reliability Limit Legal Liability

Improve Efficiency of Operations Continually Improve All Processes Reduction of Waste & Reworks Manage Risk & Control Change Tangible, Monetary Savings International Recognition

HSE Auditing

• Regulatory Compliance (OSHA, EPA, DOT, USCG, BSEE)

• Process Safety Management Systems (PSM) • Safety and Environmental

Management Systems (SEMS)

• Contractor HSE Management Systems • Environmental Management Systems

to ISO 14001

• Occupational Health and Safety Systems to OHSAS 18001

• Integrated HSE Management Systems

HSE Consulting

• Process Hazards Analyses (PHAs) • SEMS Consulting

• Regulatory Consulting

• Integrated Hazards Analyses (IHAZID)

HSE Services

HSE Consulting (cont.)

• Due Diligence Reviews • Incident Investigations • Basic Risk Analyses

HSE Program Development

• Health, Safety, Security, and Environmental Systems (HSSE) • Tailored Safety Manuals

• Internal HSE Management Systems

• Process Safety Management Systems (PSM) • Safety and Environmental Management

Systems (SEMS)

• Environmental Management Systems (EMS) to ISO 14001

• Safety Management Systems to OHSAS 18001

Figure

Updating...

References

Updating...

Related subjects :