• No results found

JOHAN ANKER 8 METRE R 1918

N/A
N/A
Protected

Academic year: 2022

Share "JOHAN ANKER 8 METRE R 1918"

Copied!
23
0
0

Loading.... (view fulltext now)

Full text

(1)

Designer Johan Anker Builder Anker & Jensen # 215

Date 1918

Length overall 45 ft 3 in / 13.8 m Length deck 45 ft 3 in / 13.8 m

Length waterline 28 ft 7 in / 8.7 m Beam 7 ft 10 in / 2.39 m Draft 5 ft 9 in / 1.75 m Displacement 7.5 Tonnes

Construction Carvel mahogany on oak frames

Engine Lombardini LDW 1003 M 30 HP Location Norway

Price EUR 150,000 JOHAN ANKER 8 METRE R 1918

Specification

NJORD

JOHAN ANKER 8 METRE R 1918

These details are provisional and may be amended

Specification

BROKER'S COMMENTS

The Eights have always been appealing as they are sufficiently large for comfortable cruising as well as racing but not so large as to demand an army of crew

! NJORD is a total restoration and benefits from being rebuilt to her original high specification. Her interior however has been rendered far more useful than the original thereby enhancing her cruising comfort yet still enjoyable for regattas. NJORD is currently certified to conform with either the First Rule

or Second Rule.

© Sandeman Yacht Company Limited 2022. A member of the ABYA.

HERITAGE, VINTAGE AND CLASSIC

YACHTS +44 (0)1202 330 077

www.sandemanyachtcompany.co.uk

SANDEM AN YACHT COMPAN Y

Brokerage Of Classic & Vintage Yachts

(2)

VAT,which we would expect to be applicable at 5% is unpaid on this yacht

NJORD is the last of several names for this yacht; her having has enjoyed a succession of owners over the years as she approaches her century. Her names and those of her owners are listed thus from the records.

- 1ST BAUS II Consul Harald Hansen, Skien. KNS member from 1912 (not member in 1935), BAUS I is a 40m2 cruiser. For the Olympic season of 1920 BAUS II was together with most of the rest of the S fleet converted and measured under the new R-rules of 1919. BAUS II got the sail number 8N13.The following year most of the S boats decided again to sail in their own class under the S-rules and again with the sail number SH28.

- 2nd SPURT IV Owner J H Beck jr, Skien from 1921, KNS member from 1916 to 1929

- 3rd AMY Owner Bjarne Hansen, Oslo from 1927, member of KNS from 1920 as lifetime member to 1930

- 4th ARABELLA Owner Hans Reinhart Larsen, Oslo; member of KNS from 1920 and owner of the boat from 1929 - 1932. Director Larsen is listed in 1949 with ARABELLA IV, an 8m H41 – 1946 model

- 5th NØKK IV 1933-1934

- 6th DIMPLE Owner Eilert Falch-Lund, Oslo; from 1935, member of KNS 1906 - 1956. No new names during this period. Yacht still has original rig of c 97m2. KNS yearbooks from 1937 to 48 not investigated, however in 1956 there are no registrations of new names or owners

- 7th JEANITA 2 Owner Cæsar Bang, Oslo; member of KNS in 1922. He is registered in all the yearbooks from 1949 -1958 and the boat maintains the original rigging in 1949

Of 6 sister boats from 1918 and 5 from 1919, 4 are still in the KNS registry of 1949. 2 are rigged down respectively to 57m2 and 74m2. JEANITA 2 was still registered in 1956 and 1958 with 96m2 sails. During this period she was the last registered on the fjord.

- 8th NJORD 1963 Owners A. Stokke / S. Lossius, Trondheim - 9th 1968 Owner Sophius Lossius, Trondheim

- 10th 1972 Owner Sverre Christensen, Trondheim - 11th 1977 Owner Sverre Christensen, Asker.

- 12th 1984 Owner Einar Husby, Stathelle (Purchased by Einar Husby, Stathelle.

- 13th 1992 Owner to date Erik Vennemoe, Oslo.

- Restoration started in 1994 at Holmen Slipp in Asker.

- In 1996 NJORD was moved to the Sollerudstranda School, at which various boat builders worked on her over the years.

The hull is carvel mahogany planking on oak frames and Oregon pine deck, restored to original specifications with exception of stainless steel bolts including the keel bolts instead

of iron. NJORD was built by Anker & Jensen of Oslo, one of the most prestigious yards in Scandinavia using materials and applying craftsmanship of the very highest quality.

- Deck layout is uncluttered; all fittings in stainless steel or chrome - Andersen full stainless winches

- Electric anchor winch

- Bruce stainless steel main anchor, 4 m chain and 35 m rope - Small folding kedge anchor and warp

- Fenders and warps

From the Lazarette with hatch cover aft, the cockpit gives access via pull out boards, sliding hatch and companionway steps down over the engine housing to the main accommodation. Described as a Regatta interior, it is remarkably spacious below, framed and furnished in mahogany with bright deck beams and bulkheads contrasting with the white painted deck head, which combined with white soft furnishings gives a warm yet very light interior, thanks also to the skylight over.

- Galley with Taylors paraffin 2 hob cooker port

- Stainless sink with bronze water pump and instrument panel starboard - 2 x Settee berths; 1 each side

- Doorway in forward bulkhead to fore cabin - Head compartment with Baby Blake WC - 2 x Quarter / pilot berths; 1 each side aft Specification

VAT

Specification

HISTORY

Specification

CONSTRUCTION

Specification

DECK EQUIPMENT AND GROUND TACKLE

Specification

ACCOMMODATION AND DOMESTIC EQUIPMENT

HERITAGE, VINTAGE AND CLASSIC

YACHTS +44 (0)1202 330 077

JOHAN ANKER 8 METRE R 1918

(3)

- Anker & Jensen 10m R mast 1907, 19 m hollow Oregon pine, adapted to Bermuda rig

- Hollow Oregon pine boom 2009 - Flush mount slide rail - Oregon pine genaker pole - Facknor rolling foresail

- Doyle sails from Fredrik Brodersen all suitable for cruising

- 57 sq m Main sail cream Dacron ¼ cloth 3+2, mounted in separate slides - 45 sq m Genoa cream Dacron ¼ cloth

- 29 sq m Foresail cream Dacron ¼ cloth - 95 sq m Genaker

- Lombardini LDW 1003 M 30 HP

- Stainless steel prop shaft and Varioprop feathering propeller - Electric automatic bilge and cockpit pump

- Manual bilge pump

- Separate engine start and service batteries

- 50 litre polybag water tank

- 2 x Connected portable 25 litre diesel fuel tanks - 2 x Spare portable 25 litre diesel fuel tanks

- Hand held devices, iPad mounting kit - Portable compass

- In accordance with local regatta rules

NJORD’s present owner purchased her in 1993, sailed for 2 years and thereafter started comprehensive restoration / reconstruction including new mahogany skin, Oregon pine deck and boom, rebuilt

and refitted 10m mast, oak frames and ribs, Andersen stainless steel winches, the new Lombardini 30 HP engine, Baby Blake WC and oven. She was ready for use again May 20th 2009.

Specification

RIG SPARS AND SAILS

Specification

MECHANICAL, ELECTRICAL AND TANKAGE

Specification

NAVIGATION COMMUNICATIONS AND ELECTRONICS

Specification

SAFETY

Specification

REFIT FEATURES

Disclaimer

These particulars have been prepared from information provided by the vendors and are intended as a general guide. The purchaser should confirm details of concern to them by survey or engineers inspection. The purchaser should also ensure that the purchase contract properly reflects their concerns and

specifies details on which they wish to rely.

(4)

02.jpg Specification

GALLERY

HERITAGE, VINTAGE AND CLASSIC

YACHTS +44 (0)1202 330 077

JOHAN ANKER 8 METRE R 1918

(5)

03.jpg

04.jpg

(6)

05Stbdqtr1.jpg

06Deckaftabove.jpg

(7)

07Aftdeckvfwd.jpg

(8)

08Bowdetail.jpg

(9)

09Furlerdetail.jpg

(10)

10Foredeckvaft.jpg

(11)

11Mastandskylight.jpg

12Amidships.jpg

(12)

13Cockpitstbd.jpg

14Cockpitandboom.jpg

(13)

15Aftdeck.jpg

(14)

16Transom.jpg

(15)

17Winchdetail.jpg

(16)

18Tillerdetail.jpg

(17)

19Cockpitaccessfwd.jpg

20Accomoverview.jpg

(18)

21Galleyport.jpg

(19)

22Galleystbd.jpg

(20)

23Deckheadfwd.jpg

(21)

24Headviewaft.jpg

(22)

25Saloonvaft.jpg

26Liftin.jpg

(23)

27Originalconfiguration.jpg

References

Related documents

TetraVue’s 3D camera technology promises automate registration without setups - Imagery & coordinate information from a single sensor. Existing solutions are too costly

Locate the stainless steel Pivot Base Winch Mount, two stainless steel Pivot Base Plate Brackets, four 3/8-16 x 1-1/4" long stainless steel hex bolts, eight stainless

Collaborate with Digital Marketing, National Media Relations, Sales, Promotions, Creative Services, International Marketing and Partnership Marketing to extend the Virginia is

Connector type Plug and jack: Straight, Receptacle: Straight, right angle Plug termination type Crimp1. Receptacle termination type Crimp, PCB dip Receptacle mounting style Flange,

Rather than being stamped with F593C/D or F593G/H (ASTM specifications for inch series stainless bolts), metric bolts will have a metric property class designation stamped on

Specifically, the advantage of using PLS is that it simultaneously models the variation among numerous and strongly correlated X- variables and the variation among

The Federal Bureau of Prisons (BOP), the second largest employer of Federal officers overall, and the largest in the Justice Department, employed 15,214 correctional officers

This is because polymer chains and lithium fluoride ions could act as traps for the moving charge carriers by hopping process[4], with the increase of temperature, the