TCD_AZ_PSW

(1)

(2)

TCD

Technical Customer Documents (TCD)

Diesel fuel-injection technology

Common Rail

further transmission to third parties in not permitted. The last edition is valid. page 1

Overview sheet

KT 45 110 313_en

injector (CRI 2.0)

0 First Edition 23.01.2007 DS/EIE1-Ld DS/EIC7-Ac DS/EIC7-Fl

Index revision Date Revised Checked Approved

Robert Bosch GmbH, equipment for motor vehicles, division DS, sales of Diesel injection equipment, P.O.Box 30 02 20, D-70442 Stuttgart, Germany

Customer : FOTON

Customer identification number : CRI2.0

Bosch order number : 0 445 110 313

Valid./Change no

Offer drawing : A 445 118 038 22.11.06 / 5 Test data sheet (KP) : F 00V C19 777 25.01.07 / 0 Characteristic data sheet (KQ) :

Characteristic data sheet CRI2.0 0 449 A05 004 27.10.06 / 0 Assembly/disassembly of injectors on engine 0 449 A05 022 27.10.06 / 0 Injector Quantity Adjustment (IQA) 4+1PP 0 449 A05 028 27.10.06 / 0 Allowed fuels 0 449 D05 001 03.01.07 / 2

The product conforms to the specifications, as long as the tests are carried out in accordance with the above-mentioned test data and test method sheets.

Measurements of volume on mechanisms, which are not merged into the BOSCH alignment system, cannot be considered as absolute values.

The product is released only for the systems approved by Bosch. Bosch cannot give any warranty on new applications or applications which were changed by the customer unless such applications have been specifically approved for use by Bosch.

For contents of the TCD-information: For acceptance of the TCD Fa. Robert Bosch GmbH,

Division DS - Diesel Systems

Application and technical sales - Department DS/____

Customer

(3)

TCD

Technical Customer Documents (TCD)

Diesel fuel-injection technology

Common Rail

further transmission to third parties in not permitted. The last edition is valid. page 2

Overview sheet

KT 45 110 313_en

injector (CRI 2.0)

Index revision Date Revised Checked Approved

Robert Bosch GmbH, equipment for motor vehicles, division DS, sales of Diesel injection equipment, P.O.Box 30 02 20, D-70442 Stuttgart, Germany

(4)

Copyright Robert Bosch GmbH

(5)

BOSCH

Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.

Remarks

F 00V C19 777

0 08.12.2006 14:04:32 25.01.2007 10:38:39

...:

...: ...: ...:

Data Sheet

Revision Publication Date Page ...: Date 1450 1200 600 600 300 800 245 630 290 690 59,7 1,7 13,9 1,5 5,0 ±1,8 ±1,2 ±0,6 ±0,8 (1) (2)

TCD: KP-Data Sheet Common Rail: CRI2.0

...: additional Part-Nrs. ...: Status valid at (1) (2)

Valid for all IQA test points:

- Width of quantisation steps for IQA 0,1 mm³/shot

- Testing tolerance refering to the testpoint setpoint value Qinj(x) under consideration of the individual IQA correction The quantity average value of an injector is not permitted below 0,3 mm³/shot

¹ Return value [mm³/H] complies at 1000 Injections/min to [cm³/min]

FOTON ...: Customer ...: Customer Order Nr. 0 445 110 313 ...: Injector changed/checked/released DS/EIN-Bu SACARCELIK ...:

Current Profile "EDC16"

1 2 3 4 5 MI MI MI MI MI IQA-FL IQA-PiI2 IQA-EM IQA-PiI IQA-LI

-Fuel Delivery Setpoint Qinj(x) Test.Tolerance [mm³/stroke]

S/S-Rang.(±3s)

[mm³/stroke]

P [bar] ET [µs] for Qinj(x) 0-km for Qinj(x) Field

Selection Range [mm³/Hub] for Qinj(x)

No. Description Testpoints

Bypass Current _Is _{18,0 A} Bypass Time tsh 450 µs Hold Current Ih 12,0 A

Boost Voltage Uc 48 V Shutoff Voltage 1 Uab1 30 V Shutoff Voltage 2 Uab2 50 V = = = = = = S/S-Rang.(±3s) ±1,8 ±1,2 ±0,6 ±0,8 ...: Remarks ...:

Return Value ¹ 0-km...: max. 51 mm³/H

max. 56 mm³/H ...: Field at 1450 bar / 800 µs ...: Injector Note +4,0 +2,4 +0,9 +1,5 -4,0 -2,4 -0,9 -1,5 +2,0 +0,9 +0,5 +0,7 -2,0 -0,9 -0,5 -0,7 +2,0 +2,0 +1,3 +2,0 -6,0 -2,8 -1,3 -2,0 1 / 1

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)