Paging & Messaging at the VCU Medical Center

Either dial Voice Mail group number, press preprogrammed VM GROUP flexible button, or press flashing MESSAGE WAIT button. You are then prompted to enter the password for

“Enter your ID followed by pound.” - Enter your 4-digit campus phone extension, then press pound (#).. “Enter your PIN followed by pound.” - Your PIN is the one set up for

• To access your Voice Mail from your home phone, dial your 10-digit phone number and enter your default passcode when prompted?. The default passcode will be the last four digits

In the Enter Phone Number field, enter the phone number by clicking the numbers on the WebPhone keypad, and then click the DIAL button or press the Enter key on the

Press * 7 4 and listen for the dial tone, then press a one-digit speed code, (choose any number from 2 through 9) and enter the phone number you wish to assign to that speed

From your phone, dial the Exchange voicemail number [2222], or press the voicemail speed dial button on your UWSP phone (if applicable).. Enter your first-time PIN followed

from another campus phone with voice mail: dial 2-8629, press *, enter your fi ve-digit mailbox number, and enter your password. from another campus phone without voice mail:

To check your diversions  Enter the access number wait for dial tone Press while holding down code PIN your full phone number.. How to cancel  Enter