Features :
Datasheet
Solid-State Lighting Series
120W High Bay II
■ Solid State Lighting Technology
■ Superior Light Quality
■ Reduce CO₂ Emission
■ Energy Saving(120W)
■ Ecologically Friendly
■ Long Life-Time
■ IP65 for AL reflector
Table of Contents
General Information ...3
Product Dimensions ...3
Light Patterns ...4
Product Information ...5
Technical Data ...5
Applications ...7
Environmentally Friendly ...9
Package Information ...10
Installation Information ...11
Revision History ...12
About Edison Opto ...12
High Bay II with AL Reflector (IP65) General Information
120W High Bay II is typically used in industrial applications. They have different sized enclosed reflector. Edison Opto. provides a better lighting solution of light in low/high ceiling applications.
The appearance of Edison opto High Bay II is as similar as traditional High Bay lighting but it saves more energy and has lower light depreciation rates to decrease both energy and maintenance cost.
Without complicated installation and too much limited condition, Edison Opto. 120W High Bay II provides a great lighting solution for industrial applications.
Introduction
Product Dimensions
Unit: mm
Tolerance: ±5 mm Ø 153
Ø 360
245
345
Ø360 Ø153 Ø30
345 245
High Bay II with PC Reflector
Light Patterns Ø 153
245
435
Ø 310
Ø153
Ø310
245
435
Ø30
cd/klm C0-C180 C90-C270 2400 1600
cd/klm C0-C180 C90-C270 cd/klm C0-C180 C90-C270 cd/klm C0-C180 C90-C270
1200 800
1600
1200 800
600 400
cd/klm C0-C18 0 C90-C270 230 390
• Beam Angle 30˚ • Beam Angle 45˚ • Beam Angle 55˚ • Beam Angle 60˚
• Beam Angle 70˚
Unit: mm
Tolerance: ±5 mm
Product Information
Product Type Product Order Code
120W High Bay II 7-HB02-02
Product Specification
WATT COLOR ANGLE DRIVER REFLECTOR FUNCTION
Code Type Code Type Code Type Code Type Code Type Code Type
A2 120W 60 CW
(6000K) 3 30~39 8 Internal
100V~277V 0 No cover 7 Heatsink Al- Fin
53 CW
(5300K) 4 40~49 D External
100V~277V 1 14"Aluminum
reflector 8 UL Only
40 NW
(4000K) 5 50~59 2 12" PC reflector 9 Built-in circuit AC 3M
30 WW
(3000K) 6 60~69 F > 70
Technical Data
Notes:
1. Power consumption has 10% tolerance.
2. The 40o/60o/90o field angles have ± 10o tolerances,and the 120o /140o field angle has ± 15o tolerances.
3. The operating temperature* is based on the ambient temperature to the heatsink in 5 cm distance.
4. The luminary can’t resist chemical substances, some kind like sulfur, salt or acidic substance. That will be damage LED.
Parameter Symbol Rating / Value Units
Power Consumption -- 120 W
Color Temperature -- 6000/5300/4000/3000 K
Color -- Cool White
Neutral White
Warm White --
Field Angle (Al Reflector) -- 40°/60°/90°/120°
Degree
Field Angle (PC Reflector) -- 140°
CRI -- CW-68
NW-75
WW-80 --
Weight (Al Reflector) -- 3.3±0.2
Weight (PC Reflector) 2.5±0.2 kg
Operating Temperature Topr -30 ~ +40 °C
Storage Temperature Tstg -40 ~ +60 °C
AC Input Voltage V 100~277 V
Notes:
1. Avaliable selecion of color, angle, driver, reflector and function.
2. When choosing Driver Code D : External 100V~277V, you can choose Function Code 7 : Heatsink Al-Fin only.
Power Consumption
(W)
Beam Angle Field
Angle Color Flux
(Typ.) Lux@ 4m
(Typ.) Lux@ 6m
(Typ.) Lux@ 8m
(Typ.) Lux@ 10m
(Typ.) Lux@12m (Typ.)
120W
30° 40°
Cool White 6500 lm 1200 530 290 185 125
Neutral White 5300 lm 950 420 230 145 100
Warm White 4500 lm 850 360 205 125 90
45° 60°
Cool White 7300 lm 730 310 175 110 75
Neutral White 6000 lm 580 253 135 85 60
Warm White 5200 lm 500 210 125 75 55
55° 90°
Cool White 7600 lm 600 260 145 95 65
Neutral White 6200 lm 480 210 115 65 50
Warm White 5400 lm 420 180 100 60 45
60° 120°
Cool White 7300 lm 340 145 80 50 35
Neutral White 6000 lm 270 120 65 40 26
Warm White 5200 lm 230 95 55 35 23
High Bay II with AL Reflector (IP65)
Power Consumption
(W)
Beam
Angle Field
Angle Color Flux
(Typ.) Lux@ 4m
(Typ.) Lux@ 6m
(Typ.) Lux@ 8m
(Typ.) Lux@ 10m
(Typ.) Lux@12m (Typ.)
120W 70° 140°
Cool White 7200 lm 225 90 55 36 84
Neutral White 5900 lm 185 75 45 28 68
Warm White 5200 lm 130 60 38 25 60
High Bay II with PC Reflector
120W High Bay II luminous flux.
Applications
Edison Opto. High/Low Bay can produce an intense light in a certain area. It can be easily installed or replaced a traditional High/Low Bay lighting in warehouse, factory, gymnasium, large outlet, and etc.
0.0 1.98 3.82
22.00m 15.01
10.01 5.01
0.01
5.89 7.73 9.88 11.72 13.88 15.72 17.88 19.72 21.98 24.00m
Module Cabinet
120W High Bay II light plan example : warehouse application.
120W High Bay II light plan example : warehouse simulation picture.
120W High Bay II Application.
20 30 60 100 120 140 160 180
180 180
180
180 180
180 180
180
No.of module: 20 Flux per module: 7,600lm Total Power: 2,400W Area: 528m2 / 5,683ft2 LPD: 4.55 W/m2 / 0.42 W/ft2 Workplan height: 0.85m
Height of Room: 8.000 m, Mounting Height: 6.400 m, Light loss factor: 0.80, Values in Lux, Scale 1:309 Surface
Workplane(0.85m) /
Floor(0m) 20
70 50
112
1703 .392 17
200 29 83 6.13
13.68 3.77 21
24 Ceiling(8m)
Walls
Eav [lux] Emin [lux] Emax [lux]
Power Reduction by 70% Reduction of CO2
emission by 1286 kg Saves 92 trees a year
= =
120W High Bay II VS 400W Mercury Vapor Lamp
Environmentally Friendly
1 1 1
r
3456
1037
4000
70%
3000 2000 1000 KWh
0 1 Year
Mercury Vapor Lamp (400W)
Mercury Vapor Lamp (400W) 1500
1000
500
0 dollars
1 2 3 4 Year
Saves:USD224
Saves:USD11.5
Saves:USD436.5
Saves:USD649 Edison High Bay (120W)
Edison High Bay (120W)
Note :
Calculation based on 24 hours of daily operation.
PC Reflector Packge 120W Packge 120W Packge
(driver external)
Package Information
AL Reflector Packge 120W Packge 120W Packge
(driver external) Carton
Carton
Notes:
1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height)
1pc package of 120W heatsink length version (driver external): 215mm(width)*275mm(length)*460mm(height) 2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages) 3. AL Reflector Package : 395mm(width)*395mm(length)*170mm(height)
(Reflector Package contains 5 pcs 14” reflectors)
Notes:
1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height)
1pc package of 120W heatsink length version (driver external): 215mm(width)*275mm(length)*460mm(height) 2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages) 3. PC Reflector Package : 220mm(width)*170mm(length)*460mm(height)
(Reflector Package contains 3 pcs 12” PC reflectors, 3 pcs 12" iron rings, and accessories)
High Bay II with AL Reflector (IP65)
High Bay II with PC Reflector
Installation Information
AC wire
AC terminal
High Bay
Cable Output wire of High Bay AC wire with plug
Phase Conductor
(Line) Brown Any
Neutral Conductor
Blue Any
Protective Conductor
Green-and-Yellow Green-and-Yellow
Cable installation of 120W High Bay II.
Cable color code of 120W High Bay II installation.
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com
Copyright©2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.
www.edison-opto.com
For general assistance please contact:
[email protected] For technical assistance please contact:
Revision History
Versions Description Release Date
1 Establish order code information 2012/11/28
2 Revise Product Specification 2014/01/22
