Featured Machine In This Info Pack
Nail & Screw
Machines
Featured Machines In This Info Pack
Nail Making
U-Type Nail
1) Purchasing of wire.
2) Wire washing/Acid wash.
3) Wire drawing - this only needs to be done if the wire is thicker than the nail being manufactured.
•
THE SHARPENING MILL
- this machine sharpens the front section of wire so that it can pass
through the Wire Drawing Machine - e.g. if you have 6mm wire and
need 4mm wire then the Wire Drawing Machine will “stretch” the
wire down to 4mm so that it can be fed into the Wire Drawing
Machine.
• Occasionally when the wire is being stretched, it breaks - this is when you need the BUTT
WELDING MACHINE
.
•
THE BUTT WELDING MACHINE
is used together with the Wire Drawing Machine - it welds the
wire back together if any breakage occurs during the wire drawing process.
•
THE DISCHARGE MACHINE
removes the wire from the
WIRE DRAWING MACHINE
- it is now
ready for the NAIL MAKING MACHINE
4)
NAIL MAKING MACHINE
- this is when the wire gets cut into nails -
1
NAIL MACHINE
does up to
3 sizes (Please enquire).
5)
POLISHING MACHINE
- when nails come out from the
NAIL MAKING MACHINE
- they are black in
colour and need to be polished before packaging.
NAIL MAKING
WIRE DRAWING
ACID CLEANING
WIRE
PACKAGING
NAIL POLISHING
Nail Manufacturing Process
Capacity: 400 -
KG
SEE PRICELIST
SEE PRICELIST
600 -
KG
1000Kg -
SEE PRICELIST
1. Nail Mould
2. Nail Pin Punch
3. Nail Knife
The Nail mould is used to re-attaching wire together
SHUCKING MACHINE
De-oxidise the metalACCESSORY MACHINES BELOW ARE OPTIONAL
SHARPENING MILL
To sharpen head of wire before drawing into Dye of wire machine
DISCHARGING
MACHINE
NAIL CUTTER GRINDER
Double Cap Nail U-Type Nail
The Punch pin will punch the wire to make the nail head
The nail knife is used to cut wire to make the nail point.
Shucking machine. emoves rust or “gunk” R
on the wire
To re-grind/ cut to keep it sharp to cut through the wire when
making nails.
Discharge finished wire from drawing machine MODELS Max Diameter Min Diameter Max length Min length Power UNIT m m m m m m m m kW 94-4C 4.5 2.8 100 50 4 94-2C 2.8 1.2 50 16 2.2 94-5.5C 5.5 3.1 150 100 5.5
Different machine for different shape nails
• Machine feeds materials automatically • High speed. Low noise. less impact Machine makes nail straight, sharp point & round nail cap.
Power: 2.2kw Input diameter range: 2mm-12mm
Diameter of grinding wheel: 200mm Power: 0.75kw
ail line
For a complete n
Include following machines:
• Wire Reel• Nail Cutter grinder • Nail polishing
• aw material (6.5/6/5.5mm)R
BUTT WELDING
To weld two wires together after breakage
Diameter of wire range: 2mm-7.6mm
NAIL WASHING
POLISHING
MACHINE
/
• Easy to operateFREE Wire De coiler -•
Steel wire Wire drawing Nail making Nail polishing Finished Nails
Process
Makes Nails
Model WZ94-4C Max diameter (mm): 3.7 Min diameter (mm): 1.6 Max length (mm): 50 Min length (mm): 10 Production (pcs./min.): 150 Motor power (Kw): 4 Dimension (mm): 2350×1512×1500 weight (Kg): 2000
Production procedure: 1. Cold heading to the required size 2. Milling Slot
3. Threading
Plant consist of: Cold Heading Machine 5 Sets of Milling Slot Machines 10 sets of Thread Machines
Cold- heading Machine
Used for cold-heading of screw , bolt and rivet to form round head .cup-head, countersunk
. head and cup-head Diameter: 3-5mm Length: 12-63mm Output: 120-150 pcs/min Power: 4kw
Weight: 2000kg
Thread of wood screw , used ing for all kinds sizes of wood screw Diameter:4-8mm Length: 50-100mm Output: 5-6 pcs/min Power: 1.2kw Weight: 250kg Machine Size: 1 x 1.2 x 1.6m Threading Machine Milling Slot Machine
WIRE NAIL DRAWINGMACHINES If the wire is thick before it enters the nail making machine, it can process the wire thinner, to get the diameter you need.
Max. input diameter: 6.5mm Output min.: 2mm Power: 18.5kw Speed: 240m/min Size: 1.8 x 1.2 x 2m
Draw Die: *R300 $30 per p/c( )XX
Various Models Milling slotfor all kinds of screw ,
It operates in whole process of material-feeding , clamping , slot-milling and hopping
Diameter: 2.5-8mm Length: 12-100mm Output: 38-40 pcs/min Power: 0.8kw Weight: 200kg
NAIL SCREW MAKING PROCESS/
Used for cold-heading of screw, bolt and rivet to form round head, cup-head, countersunk head & cup-coutersunk head made of steel wire or rod.
Diameter: 1.2 - 3mm Length: 2 - 16mm Rate: 100 - 120 pcs/min Power: 1.5kw Weight: 900kg Machine Size: 1 x 0.7 x 0.8m Whole-die Cold-heading Machine Fence Welding Mesh Panels Crimped Wire Mesh
Wire washing/Acid wash
•
•Wire drawing – only if wire is thicker than the nail being manufactured.
•Sharpening Mill: machine sharpens front section of wire so it can pass through the Wire Drawing Machine E.g. If you have 6mm wire & you need 4mm wire, then Wire Drawing Machine will “stretch” wire down to 4mm.
Occasionally when the wire is being stretched, it breaks – this is when you need the BUTT WELDING MACHINE.
to fix together with the Wire Drawing Machine – It welds the wire back together if any breakage occurs during the wire drawing process.
removes wire from the – now ready for
•THE DISCHARGE MACHINE WIRE DRAWING MACHINE .
NAIL MAKING MACHINE
– When wire gets cut into nails. 1 Nail Machine does up to 3 sizes .
•NAIL MAKING MACHINE (Please enquire)
– When nails come out of – If required.
•POLISHING MACHINE NAIL MAKING MACHINE
NAIL SCREW MAKING PROCESS
/
WIRE CLEANINGACID DRAWINGWIRE MAKINGNAIL POLISHINGNAIL PACKAGING
U-Type Nail Machine
Makes Screws
Punching Machine
Main Specifications:
•Productivity (pcs/min): *50
•Capacity (kg): *1000
• Motor power (kw): 1.1
• Dimensions (LxWxH): *1450x900x1750
Corrugated Roof Nail
Machine
Main Specifications:
•Type: *
XZ
94-4C
• Dia. of nail max.: *3.8mm
• Dia. of nail min.: *2.83mm
• Length of nail max.: *90mm
• Length of nail min.: *45mm
• Designed Output: *130pcs/min
• Motor Power: *4kw
• Weight: *2200kg
Wire reel
Nail Cutter/
Grinderl
Nail washing
machine
Type Qty(set) Punching Machine 1XZ94-4C Nail Making Machine 1
Wire reel 1
2M6-6Nail cutter grinder 1
TD-600Nail Polishing Machine 1
XZ94-4C Spare parts ( Nail knife 、Nail
Mould and Punch Pin ) 20
Roll-Plating Machine 1
Roll Plating machine (Nail Galvanized machine)
Various Auxiliaries of
Automatic Corrugated
nail machine
Nail Manufacturing Process
Prices subject to change -
All prices Excl. VATDate: / /201
12 03
9
Price
List
Nail making machine
94_4C
R 191 399,00 $14 199,00
Nail making machine
94_2C
R 139 199,00 $10 299,00
Nail making machine
94_5.5C
R 243 599,00 $17 999,00
Wire reel
R 16 599,00
$1 199,00
U_type nail machine
FOR PRICE
ENQUIRE
Shucking machine
R 24 399,00
$1 799,00
Sharpening mill
R 34 299,00
$2 499,00
Butt welding
R 34 299,00
$2 499,00
Discharging machine
R 34 299,00
$2 499,00
Nail cutter grinder
R 34 799,00
$2 599,00
Nail washing_polishing machine 400kg
R 52 199,00
$3 899,00
Nail washing_polishing machine 600kg
R 69 599,00
$5 199,00
Nail washing_polishing machine 1000kg
R 86 999,00
$6 399,00
Screws_cold heading machine
FOR PRICE
ENQUIRE
Screws_milling slot machine
FOR PRICE
ENQUIRE
Screws_threading machine
FOR PRICE
ENQUIRE
Wire nail drawing machines
FOR PRICE
ENQUIRE