Industrial Communication

Siemens AG

Automation and Drives

Industrial Communication

Postfach 48 48

90327 NÜRNBERG

Cat

alog

IK PI · 2007

Industrial Communication

for Automation and Drives

industrial

_{COMMUNICATION}

Cat

alog

IK PI · 2007

Industrial Communication for A

ut

omation and Driv

es

Subject t

o c

hange without prior no

tice | Dispo 26000 | K G 0906 35.0 S 1236 EN / 621608 | Print ed in German y | © Siemens A G 2006

The information provided in this catalog contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice.

s

Supersedes:

Catalog IK PI · 2005 and

Catalog IK PI News July · 2005

The products contained in this

catalog are also contained in

the electronic Catalog CA 01

Order No.:

E86060-K4001-A110-C4-7600 (CD-ROM)

E86060-K4001-A510-C4-7600 (DVD)

Please contact your local

Siemens branch office.

© Siemens AG 2006

Industrial

Communication

for Automation

and Drives

Catalog IK PI · 2007

1

PROFINET / Industrial Ethernet

according to IEEE 802.3

2

Industrial Mobile Communication

3

PROFIBUS

according to IEC 61158/EN 50170

4

SIMATIC ET 200 distributed I/Os

5

AS-Interface

according to EN 50 295/IEC 62 026-2

6

SINAUT Telecontrol

7

Network transitions

8

ECOFAST System

9

Appendix

10

systems described in this catalog are manu-factured/distributed under application of a certified quality mana-gement system in accordance with DIN EN ISO 9001 (Certified Registration No. can be found in the appendix). The certificate is re-cognized by all IQNet countries.

Welcome

More than 60,000 people aiming for the same goal:

increasing your competitiveness. That's Siemens

Automation and Drives.

We offer you a comprehensive portfolio for sustained

success in your sector, whether you're talking

automa-tion engineering, drives or electrical installaautoma-tion

sys-tems. Totally Integrated Automation (TIA) and Totally

Integrated Power (TIP) form the core of our offering.

TIA and TIP are the basis of our integrated range of

products and systems for the manufacturing and process

industries as well as building automation. This portfolio

is rounded off by innovative services over the entire life

cycle of your plants.

Learn for yourself the potential our products and

systems offer. And discover how you can permanently

increase your productivity with us.

Your regional Siemens contact can provide more

infor-mation. He or she will be glad to help.

AS-Interface PROFIBUS Industrial Ethernet PROFINET

ERP

Enterprise

Resource

Planning

MES

Manufacturing

Execution

Systems

Control

SIMATIC Sensors

PC-based Automation

SIMATIC Controllers/ Automation System

Totally Integrated Automation

With Totally Integrated Automation (TIA), Siemens is the only

manufacturer to offer an integrated range of products and

sys-tems for automation in all sectors – from incoming goods to

out-going goods, from the field level through the production control

level to connection with the corporate management level.

On the basis of TIA, we implement solutions that are perfectly

tailored to your specific requirements and are characterized by a

unique level of integration. This integration not only ensures

significant reductions in interface costs but also guarantees the

highest level of transparency across all levels.

Plant Information Management Detailed Production Scheduling

SIMATIC IT Framework

Process Control System SIMATIC HMI_{Human Machine} Interface Drive Systems/ SINAMICS PROFIBUS PA SENTRON Circuit Breakers SIMATIC Distributed I / O SIMOTION Motion Control System SINUMERIK Computer Numeric Control SIMOCODE pro Motor Manage-ment System HART SIWAREX Weighing Technology SINAMICS SIMODRIVE SINAMICS SIRIUS Soft Starter

the first planning steps, through operation, right up to

modern-ization. Consistent integration in the further development of

our products and systems guarantees a high degree of

invest-ment security here.

Totally Integrated Automation makes a crucial contribution

towards optimizing everything that happens in the plant and

thus creates the conditions for a significant increase in

produc-tivity.

PROCESS FIELD BUS U I cos o P W £ 110 kV U I cos o P W

Planning

and configuration

Products and systems

Communication

Process/production

automation

HMI Graphs Prognoses

Totally Integrated Power

Totally Integrated Power (TIP) brings together all the components

of electrical energy distribution into an integrated whole. Thus TIP

provides the answer to growing market demands in the planning,

construction and use of utility buildings and industrial buildings.

On the basis of TIP, we offer integrated solutions for energy

distri-bution, from medium voltage to the power outlet. Totally

Inte-grated Power is based here on integration in planning and

config-uring as well as on perfectly matched products and systems.

Substation Distribution Maintenance task

Hall 1 Air conditioning system checkup Distribution 3 Replacing circuit

breaker contacts Infeed II Replacing meters

CODES V=VACATION H=HOLIDAY S=SICK

REGULARHOLIDAYOTHER OVER THE HOURS TIME & ONE-HALFSICKVACATION

TOTAL HOURS DATE IN OUT IN OUT OVERTIME

SUNMONTUEWEDTHURFRISATSUNTOTAL TOTAL HOURS DATE IN OUT IN OUT OVERTIME

SUNMONTUEWEDTHURFRISATSUNTOTAL TOTAL HOURS DATE IN OUT IN OUT OVERTIME

SUNMONTUEWEDTHURFRISATSUNTOTAL DATE:

EMPLOYEE COST CENTER PAY PERIOD BEGINNING PAY PERIOD ENDING

central ON OFF local ON OFF tripped instabus EIB Message/ error manage-ment Selective protection

Main-tenance Protocols Powerquality Cost center

Building

automation

distribution systems to industrial automation and

building automation. This enables the

implemen-tation of significant savings potential.

Introduction

Your requirements

Do you want to launch new products quickly? And do you want

to respond quickly and flexibly to market requirements and

reduce conversion times and thus reduce the "time-to-market"?

Do you want to produce efficiently and economically? And do

you want to utilize the capacity of your plant/machine optimally

and minimize possible downtimes?

All the machines in your plant should then work optimally

together. Rely on open, integrated communication for your

automation needs throughout your company and beyond.

Avoid island solutions in automation and in information

technology through:

A seamless flow of information from the sensor/actuator

level up to the company management level

Availability of information in any place

Fast data exchange between plant sections

Simple, consistent configuration and efficient diagnostics

Integrated security functions which prevent unauthorized

accesses

Fail-safe communication and standard communication over

the same cable

Our offer

Communication networks are of central importance in

automation solutions. SIMATIC NET – Networking for Industry

stands for a versatile portfolio of modular blocks – designed

for industry – which contribute to solving your communication

tasks efficiently.

In the different automation areas

Across the whole workflow

Across the whole plant life cycle

For all sectors

SIMATIC NET offers solutions which utilize the advantages of

Ethernet and integrate fieldbus systems. Outstanding examples

are:

The exploitation of the field level for Industrial Ethernet

The consistency from the field level up to the company

management level

The pushing ahead of mobile communication

The integration of IT technologies

Worldwide trends

A distributed plant configuration reduces the overhead for

installation, maintenance and diagnostics. A distributed plant

configuration reduces the overhead for installation,

mainten-ance and diagnostics. Such configurations involve the use of

intelligent devices at the local level which are interfaced to one

another over networks. Openness and flexibility are important

in linking different systems and carrying out expansions. The

standards for bus systems are defined and standardized in

international committees.

Industrial Ethernet (IEEE 802.3, IEEE 802.3u and IEEE 802.11 WLAN) – the international standard network standard for all levels

Industrial Ethernet

PROFIBUS (IEC 61158/EN 50170) – the international standard for the field is the world-wide market leader for fieldbusses

PROFIBUS

PROFINET – the open Industrial Ethernet standard for automation

AS-Interface (IEC 62026-2/EN 50295) connects sensors and actuators using a two-wire cable which is an economic alternative to cable harnesses.

KNX/EIB (EN 50090, ANSI EIA 776) is the universal bus system for the entire house and building technology. KNX was developed by the Konnex Association based on EIB (European Installation Bus).

AS-Interface

With Totally Integrated Automation, Siemens is the only supplier

of a consistent range of products and systems for automation

in all sectors – from incoming goods storage via the production

process up to dispatching products, from the field level via the

production control level up to the integration of the company

management level.

The advantages of Totally Integrated Automation already pay

off at the design and engineering level, but also during assembly

and startup as well as during operation and maintenance.

Automation solutions can be created with little outlay. New

freedoms make it easier to respond more quickly and flexibly

to new market requirements.

Plants can be easily expanded or converted without having to

interrupt current operations.

Thanks to the fact that Industrial Ethernet has been venturing

more and more into automation all the way down to the field

level, two ingredients of Totally Integrated Automation are

achieving ever greater significance: PROFINET and SCALANCE.

PROFINET ... increases the productivity of your plant

For your strategic decisions you require a seamless,

company-wide information flow - from the first manufacturing step via

the operational level up to the company management level.

To achieve this, you must rely on efficiency and consistency at

the very beginning when you design your plant.

PROFINET, the open, innovative Industrial Ethernet standard,

fulfills all the demands of industrial automation and enables

integrated, company-wide communication.

PROFINET also supports the direct connection of distributed

field devices to Industrial Ethernet and the solution of Motion

Control applications in isochrone mode. PROFINET also enables

distributed automation with the aid of component technology

which allows vertical integration and fail-safe applications.

PROFINET also supports controller-to-controller communication.

SCALANCE ... for the security, flexibility and performance

of your industrial communication networks

Totally Integrated Automation by Siemens shows with a number

of successful applications around the world to what extent

consistent solutions with shared tools and standardized

mechanisms can be created today. Closely connected to this

is the selective further development of industrial communication

with SIMATIC NET. A revolutionary milestone of this

develop-ment is SCALANCE, the new generation of components for the

installation of uniform networks:

Industrial Communication

by Totally Integrated Automation

Conducted – electrically or optically – or wireless via Industrial

Wireless LAN (IWLAN).

In industrial environments and similar.

SCALANCE is available in three different versions:

The security modules of SCALANCE S are the core of this

pioneering safety concept for automation engineering from

Siemens that protects networks and data.

Based on Industrial Wireless LAN, SCALANCE W supports

integrated communication as far as areas that until now

have been difficult or even impossible to access.

The Industrial Ethernet switches (active network components)

of SCALANCE X ensure future-oriented networks; and the

perfect switch is always available for every task.

An overall solution comprises a

a bus system

–passive network components, e.g. cables

–active network components, e.g. switches

interfaces for connecting the programmable controllers to

the bus systems

–integrated interfaces

–separate communications processors

gateways, e.g. a link

software for configuring the networks

tools for maintenance and diagnostics

SIMATIC NET offers all the components required for an integrated

overall solution, and supports the following bus systems:

Enterprise Resource Planning (ERP) (e.g. PC) Control (e.g. S7-300)

Bus system

AS-Interface PROFIBUS DP Industrial Ethernet PROFINET Drives (e.g. SINAMICS) Simple field devices (e.g. digital I/O modules) Sensors/actuators Intelligent field devices (e.g.ET200S) Motion Control (e.g. SIMOTION) Level Failsafe communication _not suitable Suitable W ell suit ed

Industrial Ethernet

(IEEE 802.3 and 802.3u) –

The international standard for

local area networking. With a

market share of 90%

world-wide it is now the number one

with respect to local area

net-works. Industrial Ethernet can

be used to construct

high-performance communication

networks that span great

distances.

PROFINET –

The international standard

uses Industrial Ethernet and

enables real-time

communica-tion all the way down to the

field level while also including

the enterprise level.

Despite full use of existing IT

standards, PROFINET enables

isochronous motion control

applications, efficient

cross-vendor engineering and a

high level of machine and

plant availability on the

Indus-trial Ethernet. PROFINET

sup-ports distributed automation

(including

controller-to-controller communication)

and makes fail-safe

applicati-ons possible.

PROFIBUS

(IEC 61158/EN 50170) –

The international standard for

the field level is the world

market leader among field

bu-ses. It is the only field bus

which permits

communica-tion for manufacturing as well

as process-oriented

appli-cations.

Bus systems for Industry

Industrial Ethernet

PROFIBUS

PROFIBUS PA

intrinsically safe area Monitoring and control system Teleservice Controller Coupler Link Motor manager Drives Field devices Machine Vision Numeric Control Numeric Control

KNX

AS-Interface

Security PC/PG

Motion Control Systems Telecontrol and substation control Motion Control Systems Controller Link Actuator

Power supply unit _Sensors

Field devices Machine Vision Access Point Client Module Field device Drives Controller Controller Link Link Access Point Notebook IWLAN RCoax Cable Link Link

PROFINET

Industrial Ethernet

AS-Interface

(IEC 62026/EN 50295) –

Combines sensors and

actua-tors using a two-wire line as

price-effective alternative to

a wiring harness.

The basis for building services

automation is the global

KNX/EIB (EN 50090,

ANSEI EIA 776) standard.

Network interfaces are

imple-mented via controllers or

links. Configuration and

diag-nostics can be carried out

from any location in the plant.

S7-200

Industrial Ethernet

Industrial Ethernet offers a

powerful area and cell

network in accordance

with standard IEEE 802.3

(ETHERNET), IEEE 802.3u and

802.11 a/b/g/h (Wireless LAN)

for industry.

Ethernet is the basic technology of the Internet for worldwide

networking. The different possibilities of the Intranet, Extranet

and Internet, which are already available in office

environ-ments today, can, using Industrial Ethernet, also be utilized for

manufacturing and process automation.

The Ethernet technology which has been used successfully for

many years for switching, full duplex and autosensing allows

the user to adapt the necessary network performance to

re-quirements. The user can select the data rate as needed since

the consistent compatibility permits step-by-step introduction

of the new technology.

Ethernet presently has a market share of over 90% with a

tendency to rise further, thus placing it in pole position in the

LAN landscape worldwide.

Ethernet offfers important advantages:

Fast start-up thanks to the simplest connection method.

High availability since existing networks can be extended

without any adverse effects

Almost unlimited communications performance because

scalable performance is available through switching

techno-logy if required.

Networking of different application areas such as the office

and production areas.

Company-wide communication thanks to linking up via WAN

(Wide Area Network) such as ISDN or Internet

Investment security through continuous compatible further

development.

Data storage for Industrial Wireless LAN (IWLAN)

"Rapid Roaming"

For very fast forwarding of mobile nodes between different

access points

Chronologically exact allocation of events throughout the

whole plant system through plant-wide clock control.

SIMATIC NET relies upon this well-proven technology. Siemens

has supplied well over two million connections worldwide for

rough and EMC polluted areas of industry.

Machine Vision MOBIC SIMATIC TDC S7-300 with SINAUT ST7 Industrial Ethernet Access Point SCALANCE W788-1PRO S7-300 S7-400 SIMATIC HMI with WinAC S7-200 with SINAUT MICRO ET 200

SIMATIC NET provides important supplements to Ethernet

technology for industrial environments:

Network components designed for use in rough industrial

environments

Fast assembly on site thanks to the FastConnect wiring

system with RJ45 technology

Fail-safe networks thanks to fast redundancy and redundant

power supplies

Continuous monitoring of network components through a

simple and effective signaling concept.

Future-oriented network components with the SCALANCE X

switch family, the members of which build on one another

Note-book MOBIC SIMOTION C/P/D SINUMERIK SINAMICS S 120

workstations to be connected. The maximum volume of useful

data per task is 64 KB. S7 communication offers simple, powerful

communication services and provides a network-independent

software interface.

S5-compatible communication (SEND/RECEIVE)

S5-compatible communication (SEND/RECEIVE) is used by

SIMATIC S7/C7 to communicate with existing systems, especially

with SIMATIC S5 partner, but also with PCs over PROFIBUS and

Industrial Ethernet.

FETCH and WRITE is also available over Industrial Ethernet to

ensure that software created for SIMATIC S5 can continue to

be used with SIMATIC S7 without any modifications.

Standard communication

This comprises standardized protocols for data communication,

e.g. FTP. Fail-safe communication is also possible via Industrial

Ethernet.

OPC

(OLE for Process Control)

is a standardized, open and manufacturer-independent interface

and allows OPC-capable Windows applications to interface to

S7 communication and S5-compatible communication (SEND/

RECEIVE) and PROFINET.

Information technology (IT) with e-mail

and Web technology

integrates SIMATIC, SIMOTION and SINUMERIK into the IT

through Industrial Ethernet. In the office environment, e-mail

and Web-browsers are widely used communication techniques.

Ethernet is used as the main communication route, in addition

to telephone cables and the Internet.

The socket interface for Industrial Ethernet

facilitates data communication with computers via TCP/IP.

Users can program the data exchange freely using this widely

used interface in the PC and UNIX world. SIMATIC S7 and

SIMATIC TDC use the SEND/RECEIVE blocks (S/R) to access TCP/IP.

PROFINET communication services

PROFINET IO for connecting distributed field devices to

Industrial Ethernet

PROFINET CBA for modern plant construction for the

implementation of distributed automation structures based

on pre-assembled components

The following communication functions/services are offered

by Industrial Ethernet:

PG/OP communication

This includes integrated communication functions, via which

the SIMATIC, SIMOTION and SINUMERIK automation systems

can carry out data communication with any HMI device (TD/OP)

and SIMATIC PG (STEP 7).

PG/OP communication is supported by all networks.

S7 communication

S7 communication is the integral communication function

(system function block) for the S7-400 or loadable function

blocks for the S7-300 which have been optimized in the context

PC with WinCC flexible or SINAUT MICRO SC PC _{Field PG M} SIMATIC WinAC Access Point SCALANCE W788-1RR Client Module SCALANCE W747-1RR SINAMICS S120 ET 200 SCALANCE X202-2P IRT ET 200S with IM 151-3 PN FO SIMOTION D/P SCALANCE S SINUMERIK

PROFINET –

The open standard for automation

The increasing importance of

vertical integration shows the

important role played by

industrial communication

throughout modern

automa-tion engineering.

PROFINET, the open and cross

vendor standard based on Industrial Ethernet, enables direct,

transparent access from the corporate management level to

the field level. To make this possible, PROFINET relies on

established IT standards and fully supports TCP/IP.

Make use of synergies and protect investments:

Problem-free integration of existing systems

Do you want to continue utilizing and expanding existing

systems and plant sections which communicate over PROFIBUS

and other fieldbuses in future? No problem! With PROFINET,

integration of the installed basis is easy and can be done

without a lot of overhead. PROFINET thus ensures a high level

of investment protection for existing systems and you can rely

on an innovative standard – now and in the future.

The optimum basis for PROFINET: Industrial Ethernet

Ethernet has established itself as standard in the office world.

Thanks to its excellent market acceptance, Ethernet was chosen

for continuous further development, for example as regards

transmission rates. In order to make it possible to utilize Ethernet

for hard industrial demands, we have been offering Industrial

Ethernet, a standard-based network, for more than 15 years.

PROFINET utllizes this basis to link devices from the field level

to the management level, thereby combining industrial

capa-bilities with the continuity and transparency of inter-company

communication.

PROFINET: New possibilities for Industrial Ethernet

As a component of IEC 61158, PROFINET is based on the

international Ethernet standard (IEEE 802.3) and builds

systematically on Fast Ethernet with 100 Mbit/s and switching

technology. PROFINET is particularly distinguished by the

following: Shared use of real-time and TCP-based

communi-cation over the same cable as well as scalable real-time

communication for programmable controllers, distributed I/O

and motion control. PROFINET therefore ensures short response

times and continuity from the field level to the management

level.

Process

Real-time

communication

Distributed

field devices

Motion

control

Distributed

intelligence

Network

installation

IT standards

& security

Safety

Integrated

PROFINET

Safety Integrated

PROFINET also fulfills all required prerequisites as regards

complete safety for humans, machines and the environment.

The use of PROFIsafe enables a network for standard and

fail-safe communication – on one and the same cable.

IT standards & security

PROFINET provides all functions for optimum configuration

and diagnostics. All relevant data can be accessed from

anywhere in the world over the Internet. PROFINET also fulfills

increased demands on data and network security.

Simple network installation

PROFINET relies systematically on 100 Mbit/s switching

technology and supports linear and ring network topologies

as well as the star topology customary with Ethernet. This

minimizes cabling overhead and ensures the highest possible

availability. Wireless communication opens the door to new

industrial applications.

Distributed intelligence

PROFINET offers new options for the implementation of

distributed automation structures: Systematic modularization

and simple machine-to-machine communication with

plant-wide engineering - thanks to Component Based Automation

Motion control

PROFINET makes it possible to implement very fast, isochronous

drive control for high-performance motion control applications

without a lot of overhead while at the same time using TCP/IP

communication.

Distributed field devices

Distributed field devices can be directly interfaced to Industrial

Ethernet via PROFINET. This enables fast data interchange

between I/O and controller and provides for significantly better

diagnostic options.

Real-time communication

PROFINET fulfills all real-time demands relevant to automation,

including isochronous mode. PROFINET is therefore also suitable

for particularly sophisticated, complex applications, for example

those involving motion control.

Process

PROFINET was conceived as a comprehensive standard for all

automation tasks. Special requirements for use in industrial

plants and the interfacing of process instrumentation devices

and analyzers are currently being worked on with an eye toward

standardization.

while differentiating between three basic communication

characteristics:

Non-real-time such as TCP/IP and UDP/IP communication

Real-time (RT) and

Isochronous real-time (IRT)

TCP/IP and UDP/IP communication

Non-time-critical data transmission with TCP/IP and UDP/IP is

the technical basis for communication – for instance for

assigning parameters and configuration. In the IT landscape,

TCP/IP is a defacto standard.

The solution for all demands:

Industrial Mobile Communication

IMC stands for the industrial mobile communication products

of SIMATIC NET that utilize wireless communication. This is

based on worldwide standards, such as IEEE 802.11, GSM,

GPRS or, in the future, UMTS.

Also possible is fail-safe wireless

communi-cation over IWLAN.

IWLAN/ PB Link PN IO PROFIBUS Access Point SCALANCE W788-1RR Client Module SCALANCE W747-1RR Access Point SCALANCE W788-1RR ET 200S S7-300 with PROFINET-CPU or CP 343-1 ET 200pro SINAMICS PC with SINEMA E planning software ET 200S S7-300 with CP 343-1 Lean with integrated 2-port switch PROFINET IWLAN RCoax Cable

The key to future market success lies in the ability to provide

information and access to information at any time and in any

location.

With mobile systems interconnected via fast wireless radio

networks (Wireless LAN), processes can be designed for greater

efficiency. The main advantage of wireless solutions is easy

and flexible access to mobile stations. Industrial Mobile

Communication (IMC) plays an important role in this:

Increased competitiveness since greater mobility achieves

higher flexibility

Maintenance work is simplified, service costs and downtimes

are reduced and personnel is used optimally

Spare parts lists and manuals are available regardless of the

location

Work orders can be received and acknowledged online

Integrated radio network for voice and data beyond corporate

boundaries

The system solution is tested and well-proven because the

network components, communications processors and

software are perfectly matched to each other

Remote diagnosis for different production machines from a

central service location reduces service costs

Difficult to reach installations can be accessed easily; there

is no need for complex wiring

Fast commissioning of new plant sections due to reduced

overhead for the installation of the communications network

with the aid of the SINEMA E planning, simulation and

configuration software.

No wear on rotating and moving devices or equipment

Cost-effective connection to devices which are remote,

difficult to access or in hostile environments.

SCALANCE W – wireless communication

The products of SCALANCE W offer the unique combination of

reliability, ruggedness and security.

With Industrial Wireless LAN (IWLAN), an extension to the

IEEE 802.11 standard is made available that addresses the

requirements of industrial customers in particular with regard

to a deterministic response and redundancy. For the first time

customers are getting a single radio network both for data

critical to the process (e.g. alarm signaling) as well as for

uncritical communication (e.g. for service and diagnostics).

IWLAN components SCALANCE W and PROFINET, the Industrial

Ethernet standard, provide a mobile solution for new

applications all the way down to the field level.

and waterproof construction (IP65) of the metallic enclosures,

fulfilling SIMATIC's well-known high demands on mechanical

stability.

To protect against unauthorized access, the products provide

modern standard mechanisms for user identification

(authen-tication) and encryption of data, but can also be easily integrated

into existing security policies.

The "Rapid Roaming" function is available for very fast forwarding

of mobile nodes between two different access points.

AS-Interface

ET 200S

PROFIBUS

PROFIBUS DP/PA is used to

link field devices such as

distributed I/O stations or

drives with programmable

controllers such as

SIMATIC S7, SIMOTION

or PCs.

PROFIBUS, standardized to IEC 61158, is a powerful open and

robust field system with short response times. PROFIBUS is

available in different designs for different applications.

PROFIBUS DP

(distributed I/O)

is used to connect distributed field devices, e.g. SIMATIC

ET 200 or drives with very fast response times. PROFIBUS DP

is used when actuators/sensors are distributed throughout the

machine or plant (e.g. field level).

Openness all the way

Thanks to the openness of PROFIBUS DP it is, of course, also

possible to connect standardized components of other

manufacturers. The IEC 61158/EN 50170 standard ensures

that your investments are secure for the future.

Member companies worldwide offer a wide range of products

with PROFIBUS DP interface for the field level. Siemens has a

complete product portfolio of standard and fail-safe controllers,

network components, communications software and field

devices.

And for manufacturers of field devices, we offer everything

that has to do with the PROFIBUS DP, such as ASICs, training,

certification and much, much more.

PROFIsafe

Permits standard and fail-safe communication over one and

the same bus cable. PROFIsafe is an open solution for fail-safe

PROFIBUS DP SIMATIC C7 SIMOREG SIMATIC S7 ET 200M ET 200L Field PG M Notebook RFID systems SIMATIC RF MICRO-MASTER SIMOVERT MASTER-DRIVES SIMOCODE PRO SIMOTION C/P/D SIMODRIVE ET 200pro ET 200M with F I/O S7-300F with standard and F I/O

SINAMICS SINUMERIK DP/AS-Interface Link 20E ET 200eco DP/AS-i LINK Advanced

Isochronous mode

CPU, drives, I/O and user program are synchronized to the

PROFIBUS clock. The "isochronous mode" function is supported

by the CPUs of the SIMATIC S7-400, SIMOTION/SINUMERIK

and servo drives. The PROFIdrive profile is used for drive

control

PROFIBUS PA

(Process automation)

expands PROFIBUS DP with safe data and power transmission

(e.g. measuring transmitters in the food industry) in

accordance with international standard IEC 61158-2 (same

protocol, different design).

DP/EIB Link Mobile Panel

KNX

(EN 50090, ANSI EIA 776) is the worldwide standardized building installation system and the basis for building automation.

Vision Sensor VS 120 VS 130 DP/PA coupler/link SITRANS F US SITRANS P Customer specific sulutions with ASICs PROFIBUS PA RS 485iS coupler

Intrinsically safe area SIMATIC TDC DP/DP coupler ET 200iSP Power Rail Booster DP slave Customer specific sulutions with ASICs SIPART PS2 PROFIBUS FMS SIMATIC HMI S7-400 S7-300 non-Siemens

devices SIMATIC C7 Field PG M SIMATIC C7

PROFIBUS DP

* PDM is a parameterization tool for intelligent field devices

*

PROFIBUS FMS

(fieldbus message specification)

for the data communication of programmable controllers

provided by different manufacturers. In this way, general control

and measuring tasks can also be solved accurately in a

distributed fashion in addition to motion control tasks.

AS-Interface

Sensors, valves, actuators,

drives – different components

operate on the field level.

All these actuators/sensors

must be connected to a

programmable controller.

This is implemented with the

help of distributed I/O devices; so to speak as intelligent outposts

on site.

AS-Interface connects the components of the field level by

means of a twisted pair cable as a low-cost alternative to a

cable harness.

AS-Interface is used where individual actuators/sensors are

distributed spatially over the machine (e.g. in a bottling plant).

AS-Interface is the open international standard IEC 62026-2/

EN 50295, and is supported worldwide by 280 member

companies of the AS International Association, including the

leading manufacturer of actuators and sensors. The system

has been used successfully in the field since 1994, and is with

10 million installed nodes the uncontested market leader

among bit-oriented bus systems.

AS-Interface is a single-master system. There are

communica-tions processors (CPs) for SIMATIC and for SIMOTION and Links

which, as master, control field communication.

With AS-Interface Specification V2.1 resp. V3.0, it is possible

to connect as many as 62 slaves. AS-Interface Specification

V3.0 enables the connection of up to 1,000 digital inputs/

outputs (Profile S-7.A.A: 8DI/8DO as A/B slave). New profiles

open the door to the use of expanded addressing, even for

analog slaves. "Fast Analog Profiles" speed up analog value

transfer. Thanks to integrated analog-value processing in the

masters, the access to analog values is just as simple as the

access to digital values.

The connection of SIMATIC S7 controllers, WinAC or other

systems to AS-Interface is implemented via IE/AS-iLINK PN IO,

DP/AS-i LINK Advanced or via the DP/AS-Interface Link 20E.

DP/AS-i-LINK Advanced and DP/AS-interface Link 20E in IP20

are available for direct interfacing of the AS-Interface to

PROFIBUS DP. This allows the AS-Interface to be used as subnet

for PROFIBUS DP.

IE/AS-i LINK PN IO enables direct interfacing of the AS-Interface

to Industrial Ethernet and thus direct embedding in the

PROFINET environment.

In this way, you can make savings

AS-Interface replaces complex cable harnesses and connects

binary actuators and sensors such as proximity switches, valves

or indicator lights with a programmable controller, e.g. SIMATIC.

In practice, this means: Installation runs smoothly because

data and power are transported together on one cable.

Thanks to the specially developed flat cable (in yellow) and to

insulation displacement, the AS-Interface slaves can be

con-nected at any point.

This concept ensures extreme flexibility while saving a significant

amount of time and money. Special knowledge about

installation and commissioning is not required. In addition, the

ease of laying the cable and the clear structure of the cable as

well as the special version of the cable not only significantly

reduce the fault risk, but also the overhead for service and

maintenance.

AS-Interface distributor (without AS-Interface chip) AS-Interface-Netzteil I/O module digital/analog (without AS-Inter-face chip) Repeater LOGO! Operator control panel

Safe slave with EMERGENCY STOP

Compact starter IP 65

AS-Interface power supply

AS-Interface master * PROFIBUS DP

Safety monitor Signal evaluation 24 V DC power supply

AS-i Extension Plug (for segment length up to 200 m) Max. AS-iI cable length

per segment:

100 m without Extension Plug 200 m with Extension Plug

Max. AS-iI cable length per segment:

100 m without Extension Plug 200 m with Extension Plug

connected to an AS-I line.

SIMATIC C7 DP/AS-Interface Link 20E

S7-300 S7-200 SIMOTION C AS-Interface distributor PROFINET Industrial Ethernet AS-Interface master * S7-300 with PROFINET-CPU S7-200 SIMATIC C7 IE/AS-i LINK PN IO AS-Interface DP/AS-i LINK Advanced

Telecontrol and remote maintenance

SINAUT Telecontrol

SINAUT, the telecontrol system based on SIMATIC S7, consists

of two independent systems:

• SINAUT ST7

Versatile telecontrol system based on SIMATIC S7-300,

SIMATIC S7-400 and WinCC for fully-automatic monitoring

and control of process terminals which exchange data with

one or more control centers or with each other via a WAN

or over Ethernet (TCP/IP).

• SINAUT MICRO

Telecontrol system for monitoring and controlling distributed

plants using wireless communication (GPRS) on the basis of

SIMATIC S7-200 and WinCC flexible or WinCC. As a result of

its bidirectional communications capability, SINAUT MICRO

can handle simple telecontrol tasks.

An OPC server is available for both systems which permits

connection to a non-Siemens control center system (OPC client).

SINAUT ST7

SINAUT ST7 facilitates an integrated communications concept

(TIA) and complete integration into the SIMATIC environment.

The modular design and the support of a huge variety of

network forms and operating modes including Ethernet permit

the design of flexible network structures that can also contain

redundant links.

By using all forms of transmission media (e.g. dedicated line,

wireless, dial-up networks, SMS, FAX), the networks can be

optimally adapted to the respective local conditions.

First-time configuration of even highly complex networks and

their expansion can be carried out easily and cost-effectively

thanks to the software packages provided and STEP 7.

The control center

The following can be used as central control centers:

SIMATIC S7-300 or S7-400 controllers.

SINAUT ST7cc, the PC control system (simple or redundant),

is based on WinCC. It is a supervisory control system specially

matched to the event-controlled and time-stamped data

transmission of the SINAUT system.

SINAUT ST7sc for connecting control centers of other

manufacturers over OPC. The SINAUT telecontrol technology

can also be connected to control center systems of other

manufacturers via the data access interface. ST7sc features

extensive buffer mechanisms which prevent data from being

lost even if the OPC client fails.

SINAUT WANs

Dedicated lines (copper and fiber-optic cables)

Private radio networks (optionally with time slice procedure)

Analog telephone network

Digital ISDN network

SINAUT over Ethernet

SINAUT communication over Ethernet or TCP/IP-based networks

is possible between the stations and the control point as well

as between stations. Prerequisites are fixed IP addresses as well

as connections that are similar to dedicated lines.

Change-driven data transmission

The SINAUT software in the stations ensures that process data

is transmitted between the individual CPUs and with the control

center in the event of changes.

Local data storage

A special characteristic of the TIM transmission module used

for the SINAUT ST7 system is the local storage of the data

messages (incl. time stamp) if the communication path is

disturbed, a partner is lost or for cost optimization when dialing

networks.

Date and time are always up-to-date

A DCF77 radio clock can be used to supply the CPUs and the

control center, e.g. ST7cc, with the date and time across the

network. The systems therefore always have the exact time;

including daylight savings time switchover. The GPS (Global

Positioning System) can also be used as the time source instead

of DCF77.

SINAUT remote programming and remote diagnostics

All diagnostics and programming functions provided by SIMATIC

and SINAUT for station automation and WAN communication

can be used via the SINAUT networks – without interrupting

process data transmission.

MPI DCF 77 GPS MPI SINAUT ST7cc SINAUTST7sc Central controller SINAUT Ethernet TCP/IP Industrial Ethernet WAN WAN TIM 4 TIM 4

SINAUT MICRO is the cost-effective extension to the monitoring

and control of simple telecontrol tasks. It consists of a

GSM-GPRS modem, OPC and connection management software

optimized for GPRS and an S7-200 program block package.

With this package, as many as 256 SIMATIC S7-200 stations

can communicate easily and securely over GPRS mobile radio

with the control center and with each other. They are constantly

online.

SINAUT MICRO is perfect wherever small amounts of data are

to be transferred over wireless connections. The system is

configured using STEP 7 Micro/WIN.

Maintenance personnel can also access the secured control

center and query or set current values from the S7-200 stations

from home per Internet browser. SMS or fax fault messages

sent directly by S7-200 remote stations and received over

mobile radio telephone can be analyzed in the control center,

making it possible to respond more quickly.

The routing functionality of OPC server SINAUT MICRO SC also

enables bidirectional communication between S7-200 stations

interfaced via the SINAUT MD720-3 modem.

Under WinCC, OPC server SINAUT MICRO can be combined

with SINAUT ST7cc to create a cost-optimized central fault

annunciation and telecontrol system which can grow according

to need.

The MPI interface on SIMATIC S7/C7, SIMATIC TDC,

SIMOTION/SINUMERIK automation systems and OPs is

lengthened over the telephone network. This requires nothing

more than a TS adapter and a modem. The TeleService

engineering tool establishes a connection with the machine

or plant. The familiar functionality of STEP 7, Drive ES, SIMOTION

SCOUT and the diagnostic tools are available throughout.

This teleservice is handled as if a maintenance man were

actually sitting at the machine or in the plant. An additional

PC/PG is not required.

e.g. WinCC flexible, Win CC SINAUT MICRO SC OPC server and connection manager

KONNEX (KNX)

for home and building system technology

Higher requirements with respect to flexibility and ease-of-use

of the electronics installations, combined with the desire to

minimize own costs, have resulted in the development of

building system technology. The bus technology used for this

purpose uses a common European concept.

KNX is the universal bus system for the complete range of

home and building system technology which was developed

by the Konnex Association from the

EIB (European installation bus)

EHS (European home systems)

and BatiBUS

based on the EIB. KNX products therefore ensure interoperability,

product quality and functionality in the same way as EIB.

All products are configured with a manufacturer-independent

software tool. The functionality of each existing EIB system

can be expanded with KNX.

As the most successful and most established system on the

market, EIB remains the central and unchanging system core

of the KNX standard. The expansion of the system platform

has cleared the way to offering and marketing efficient and

economic new installations for non-residential buildings,

residential constructions and modernizations.

PROFIBUS

PROFIBUS PA

PC/PG Monitoring and

control system Field device for

intrinsically safe area

Controller Coupler Link Motor manager Field devices Machine Vision Numeric Control KNX

KNX also includes radio and infrared transmission media in

addition to twisted pair cables and Powerline. This opens up

opportunities for retrofitting. Furthermore, it is also possible

to integrate additional systems such networks of electrical

appliances (home appliances etc.). In addition, services such

as remote maintenance, remote data acquisition of consumer

data and security services can be offered with KNX.

System arguments

Conventional electrical installations require a separate cable

for each function and each control system requires a separate

network.

In contrast to this, EIB permits all operational functions and

procedures to be controlled, monitored and signaled over a

shared cable. In this way, power can be supplied directly to the

consumers without extra cabling.

Apart from saving cables, this also has the following

advan-tages: Installation in a building is much less complicated and

can later be easily expanded and modified. If the systems are

later used for different purposes or spaces are divided differently,

the EIB can be adapted easily by simply reassigning

(reconfi-guring) the bus stations without having to lay new cables.

AS-Interface WinAC

Network transitions

Network transitions from one bus system to another are

implemented using links, PLCs or PCs. In the case of PLCs or

PCs, this can take place via integrated interfaces and

communications processors (CPs). Links pass on the data

autonomously from one network to the other.

The following links are available:

IE/PB Link and IE/PB Link PN IO for the transition from Industrial

Ethernet to PROFIBUS (also for fail-safe communication)

IE/AS-i LINK PN IO for the transition from Industrial Ethernet

to AS-Interface

IWLAN/PB Link PB IO for the transition from IWLAN to

PROFIBUS

DP/AS-i LINK Advanced and DP/AS-Interface Link 20E for the

transition from PROFIBUS to AS-Interface

DP/EIB Link for the transition from PROFIBUS to KNX/EIB

In the case of PLCs such as e.g. SIMATIC S7-200, S7-300,

S7-400, SINUMERIK or SIMOTION C, data is exchanged between

the individual networks by means of communications processors

or integrated interfaces. The data is linked by means of a PLC,

and therefore passed on to the other network already

pre-processed.

PROFINET network transition with proxy functionality

PROFIBUS segments can be connected to Industrial Ethernet

via PROFINET proxies. This connection can be implemented

using a solution with the SIMATIC WinAC PN optional package,

SIMATIC S7-300/400-CPUs with DP and PN interface, IE/PB Link

or via the IE/PB Link PN IO. For a wireless network transition,

a SCALANCE W-700 access point with the IWLAN/PB Link

PN IO can be used. This allows all PROFIBUS standard slaves to

be used unchanged for PROFINET.

PROFINET Industrial Ethernet SINUMERIK SIMATIC C7 IE/AS-i LINK PN IO AS-Interface master *

SIMATIC C7 DP/AS-Interface Link 20E

S7-300 S7-200

SIMOTION C

DP/AS-i LINK Advanced

* Only one master can be optimally connected to an AS-I line.

Data for practical applications

Criteria

Line Tree Star

Topology

– electrical up to 5 km

– optical up to 150 km

– world-wide with TCP/IP

– wireless with wireless LAN

Data rate

9.6 Kbit/s – 12 Mbit/s

adjustable

31.25 Kbit/s

10/100 Mbit/s

1 Gbit/s (not for PROFINET)

62

Number of nodes

max.

125

125 DP/PA Links

31 field devices pro

DP/PA Link

over 1000

electrical up to 600 m:

- With extension plug

up to 200 m

- With repeater or

extender up to 300 m

- With repeater and

extension plug

up to 600 m

Size of Network

• LA N

(Local Area Network)

• WA N

(Wide Area Network)

– electrical up to 9.6 km

– optical up to 90 km

Ex: max 1.0 km

Non-Ex: 1.9 km

1)_{with PROFIBUS PA}

Line Tree Ring Star

Line Tree Ring Star

Update times £ 5 ms

Bus system

AS-Interface

PROFIBUS DP

Industrial

2/180 System interfacing for SIMATIC and SINUMERIK 2/181 CP 243-1 2/184 CP 243-1 IT 2/187 CP 343-1 Lean 2/190 CP 343-1 2/194 CP 343-1 Advanced 2/198 CP 443-1 2/201 CP 443-1 Advanced

2/205 System interfacing for PG/PC 2/207 Performance data

2/208 Connection options to SIMATIC PCs 2/209 CP 1616

2/212 CP 1604 2/215 CP 1613 A2

2/219 S7-REDCONNECT

2/221 SOFTNET for Industrial Ethernet 2/223 SOFTNET PN IO

2/225 OPC-Server for Industrial Ethernet 2/229 PN CBA OPC server

2/232 SNMP OPC server 2/234 SOFTNET for LINUX/UNIX 2/236 SOFTBUS for LINUX/UNIX

2/238 System interfacing for SIMATIC HMI 2/246 Accessories

2/246 C-PLUG

Sec. 3 Power Supply PS791-1PRO 2/248 SICLOCK time synchronization 2/252 ET 200S distributed I/Os 2/252 IM 151-3 PN interface modules 2/255 IM 154-4 PN interface modules 2/257 Motion Control System SIMOTION 2/259 Communication Board CBE30 2/260 Communication Board MCI-PN 2/261 PROFINET technology components 2/261 Enhanced Real-Time Ethernet Controller

ERTEC

2/267 Development kits for ERTEC 2/272 Development packages 2/273 Image Processing System 2/273 SIMATIC VS120

2/277 SIMATIC VS130-2 2/282 Engineering Tools Sec. 4 STEP 7

2/282 SIMATIC iMap Sec. 3 SINEMA E Lean

2/285 SINAMICS S120 Drive System 2/287 Communication Board CBE20 Sec. 3 Industrial Mobile Communication Sec. 8 Network transitions

Industrial Ethernet

according to IEEE 802.3

2/18 Network selection criteria 2/20 PROFINET

2/20 Introduction

2/23 PROFINET-Products for Industrial Ethernet 2/25 Passive Network Components

2/25 Summary of network components 2/26 Overview of Twisted Pair 2/27 Industrial Ethernet FastConnect 2/29 IE FC RJ45 Plug 2/32 IE connecting cable M12-180/M12-180 / M12 Plug PRO 2/33 IE FC TP Cable 2 x 2 2/38 IE FC TP Cable 4 x 2 2/41 IE Hybrid Cable 2/43 Energy Cables 2/46 IE TP Cord 2/51 IE FC Outlet RJ45 2/56 IE FC RJ45 Modular Outlet 2/62 Industrial Twisted Pair –

Cables/connectors

2/65 Overview of fiber-optic cables 2/66 Glass fiber-optic cables 2/74 POF- and PCF fiber-optic cables 2/78 POF/PCF-LWL termination kit 2/80 Active Network Components 2/81 Industrial Ethernet Switches

2/81 Overview

2/83 SCALANCE X005 Entry Level

2/86 SCALANCE X-100 unmanaged

2/92 SCALANCE X-200 managed

2/100 SCALANCE X-200IRT managed 2/109 SCALANCE X-400 modular 2/119 Industrial Ethernet ELS 2/124 Industrial Ethernet OSM/ESM

2/131 Industrial Ethernet media converters 2/131 SCALANCE X-100

unmanaged media converter

2/141 Industrial Ethernet OMC TP11 and TP11-LD 2/144 Industrial Security

2/144 Overview

2/145 SCALANCE S

2/149 SOFTNET Security Client 2/151 CPUs for SIMATIC S7-300 2/151 CPU 315-2 PN/DP 2/156 CPU 317-2 PN/DP 2/161 CPU 319-3 PN/DP 2/166 CPU 315F-2 PN/DP 2/171 CPU 317F-2 PN/DP 2/176 SIMATIC WinAC

Introduction

General information

2

■

• Area and cell network according to the international IEEE 802.3 (Ethernet) standard designed for the industrial environment right down to the field level

• Connection of automation components to each other and to PC and workstations as well as components for wireless com-munication for homogeneous and heterogeneous communi-cation

• PROFINET, the open standard for automation, is based on Industrial Ethernet and supports the connection of devices from the field level up to the management level

• Comprehensive open network solutions can be implemented

• High transmission rate of up to 1 gigabit/s

• Industrial Ethernet is the industry standard, well-proven world-wide with international acceptance

• Connection to wireless LAN (WLAN) and industrial wireless LAN (IWLAN) according to IEEE 802.11

• The basis for IT in automation, such as Web function, e-mail function and IWLAN connections

• A safety solution specially designed for industrial automation with the industrial security concept SCALANCE S

Industrial Ethernet in the communications landscape

■

Ethernet presently has a market share of over 90% with a rising trend, thus placing it in pole position in the LAN landscape worldwide. Ethernet offers important characteristics that can give you significant advantages for your application.

• Investment security through continuous compatible further development

• Fast start-up thanks to the simplest connection method • High availability thanks to redundant network topologies

• High flexibility since existing networks can be extended without any adverse effects

• Basis for system-wide networking (vertical integration) • Basis for PROFINET

• Almost unlimited communications performance because scalable performance is available through switching tech-nology if required

• Networking of different application areas such the office and production areas

• Company-wide communication due to interface options via WAN (Wide Area Network) and use of Internet services • With SCALANCE W, IWLAN (Industrial Wireless LAN) from Industrial Ethernet PROFIBUS PROFIBUS PA KNX PROFINET Industrial Ethernet G_IK10_XX_50187 AS-Interface PROFIBUS PROFIBUS PA KNX AS-Interface

Introduction

General information

2

■

■

1) Language versions and manuals can be found for the various products at:

Additional information can be found in the Internet under:

http://www.siemens.com/automation/csi/net

■

Note:

In many SIMATIC NET components with management function extensive parameterization and diagnostics functions are pro-vided over open protocols and interfaces (e.g. Web Server, network management).

These open interfaces provide access to those components, which can also be used for illicit activities.

When using the above-mentioned functions and these open interfaces and protocols (such as SNMP, HTTP and Telnet), suitable security measures must be implemented that block un-authorized access to the components or the network especially from the WAN/Internet.

For this reason, automation networks can be isolated from the remaining corporate network using appropriate routers (e.g. the well-proven firewall systems).

The SCALANCE S products can be used to implement these routers.

For further information, see Section "Industrial Security". It is important to note the boundary conditions for use of the specified SIMATIC Net products (Order Nos. 6GK..., 6XV1) which you can view inthe Internet:

Additional information can be found in the Internet under:

http://www.siemens.com/simatic-net/ik-info

Standard Ethernet to IEEE 802.3u, IWLAN

to IEEE 802.11 Data transmission rate 10/100/1000 Mbit/s

Number of stations unlimited

Network size

• Switched network unlimited (above 150 km, take into account signal propagation time )

Transmission medium

• Electrical network Industrial Twisted Pair and Twisted Pair cable

• Optical network Fiber-optic cable (glass)

• Wireless network Surrounding space

Topology Line, tree, ring, star

Protocols Protocol-independent

Manual for TP and fiber-optic networks

Paper version

Network architecture, compo-nents, configurations, installation guidelines

• German 6GK1 970-1BA10-0AA0

• English 6GK1 970-1BA10-0AA1

SIMATIC NET manual collection 6GK1 975-1AA00-3AA0 Electronic manuals for

commu-nication systems, protocols, products

Introduction

Data communication

2

■

Communication functions/services

Data communication serves to exchange data between pro-grammable controllers or between a propro-grammable controller (controller and field devices) and intelligent partners (PCs, computers, etc.)

The following communication functions are available for this purpose:

PROFINET

Based on Industrial Ethernet, PROFINET enables direct commu-nication of field devices with controllers as well as the solution of isochronous motion control applications.

PROFINET also supports distributed automation with the help of component engineering.

PG/OP communication

Integral communication functions that are used by the SIMATIC programmable controllers to perform data communication with HMI devices (e.g. TD/OP) and SIMATIC PGs (STEP 7, STEP 5). PG/OP communication is supported by MPI, PROFIBUS and Industrial Ethernet.

S7 communication

S7 communication is the integral communications function (SFB) that has been optimized within the SIMATIC S7/C7. It enables PCs and workstations to be connected. The maximum volume of useful data per task is 64 KB. S7 communication offers simple, powerful communication services and provides a network inde-pendent software interface for all networks.

Open Industrial Ethernet and S5-compatible communication

(SEND/RECEIVE)

The open IE S5-compatible communication (SEND/RECEIVE) is used by SIMATIC S7/C7 to communicate with existing systems, especially with SIMATIC S5 but also with PCs over PROFIBUS and Industrial Ethernet. FETCH and WRITE is also available over Industrial Ethernet to ensure that software created for SIMATIC S5 (automation systems, HMI systems) can continue to be used with SIMATIC S7 without any modifications.

Standard Communication

This comprises standardized protocols for data communication . • OPC

(OLE for Process Control) is a standardized, open and manu-facturer-independent interface and allows OPC-capable Windows applications to interface to S7 communication and S5-compatible communication (SEND/ RECEIVE). Internet communication can be implemented over the OPC XML DA interface.

• ISO, TCP/IP and UDP transport protocols

ISO, TCP/IP and UDP are available as the transport protocols. • Information technology (IT) with Email and Web technology

Integrates SIMATIC into the IT through Industrial Ethernet. In the office environment, Email and Web browsers are widely used communication techniques. Ethernet is used as the main communication route, in addition to telephone cables and the Internet. These communication media and paths are also available to SIMATIC as a result of the TCP/IP protocol. SMTP (Simple Mail Transfer Protocol) can also be used for Email, HTTP (Hyper Text Transfer Protocol) for access using Web browsers and FTP communication for program-controlled data exchange with computers that have different operating systems installed.

• FTP;

The file transfer protocol (FTP) permits simple, universal cou-pling, e.g. PLCs can be connected to different computers or embedded systems.

System connections

For many data terminals, communications processors (CPs) are available that already have the communications functions imple-mented as firmware and that therefore relieve the data terminal of communications tasks (e.g. flow control, blocking, etc.).

Introduction

Communications overview

2

■

Communications overview for SIMATIC, SINUMERIK and SINAUT 1) ISO protocol only

2) IT functionality included in IT-CP 3) If CPU is the time-of-day master 4) without client function

*) PG/OP communication

Hardware Transport_protocol S7 communication PROFINET S5 comp._communic. Time of day

Put/Get Client Put/Get Server H communication Sender (Master) Receiver Forward with NTP

ISO TCP UDP Fetch/W

rite IO controller CBA SINAUT ST7 CP 343-1 Lean CP 343-1 CP 343-1 Advanced CP 443-1 CP 443-1 Advanced CP 1430 Basic CP 1430 Ext. CP 1430 TCP CP 243-1 CP 243-1 IT TIM 3 V-IE TIM 3 V-IE Advanced SIMA TIC S7-300/C7 SIMA TIC S7-400 SIMA TIC S5 PG/ OP* IT TF 2) FTP SIMA TIC S7-200 G_IK10_XX_10057

BSEND BRECV USEND URECV

1) SEND/RECEIVE 4) 4) 3) 3) 4) CP 343-1 CP 343-1 Advanced SINUMERIK 840D powerline 4) 4) suitable

Introduction

Communications overview

2

■

Communications overview for PG/PC

4) S7-1613 S7-REDCONNECT SOFTNET-PG CP 1613 A2 DK-16xx PN IO G_IK10_XX_10058 SEND/RECV

Put/Get Client Put/Get Server BSEND BRECV USEND URECV Fetch/W

rite TCP UDP 4) Win 2003 Server Win XP Professional ISO CP 7515 SOFTNET-S7 Lean SOFTNET-PG SOFTNET-S7 Lean

Win 2000 Prof./ Server LINUX

SOFTNET-S7

OPC PG/_OP 2) PROFINET IT IWLAN

6) 6) 6) CP 1616 CP 1604 PN CBA OPC-Server CBA IO controller 4) FTP SOFTNET-S7 SOFTNET PN IO SOFTNET-S7/ LINUX Software

1) Further information for more hardware can be found under www.siemens.com/simatic-net/ik-info 2) PG/OP communication

3) supported by TLI/DLPI drivers

4) The IT-, FTP- and UDP functionality results in association with the hardware/ the CPs and the Windows/Linux software of the PC 5) Software source of the card driver included; for Suse 9.3 6) via driver portability

If you have questions to LINUX- / UNIX projects please contact I&S, e-mail: [email protected]

Time of day Transport protocol Hardware SIMATIC PG/PC with integrated interface 1) Operating system

H communication Sender Receiver Forward

S7 communication S5 comp._communic.

suitable not suitable

suitable under certain premisses

IO device

Ethernet Cards 3)

Introduction

Configuration examples

2

■

S7 communication with TCP/IP for Industrial Ethernet

S5-compatible communication for Industrial Ethernet S7-300 with CP 343-1 Lean, CP 343-1 or CP 343-1 Advanced S7-400 with CP 443-1 or CP 443-1 Advanced S7-400 with CP 443-1 Advanced PC/PG with CP 1616 or CP 1613 A2 PC with CP 1613 A2 with S7-1613 or SOFTNET-S7 Cell phone Field PG with CP 7515 S7-200 with CP 243-1 or CP 243-1 IT G_IK10_XX_10009 Industrial Ethernet Industrial Ethernet G_IK10_XX_10010 S7-300 with CP 343-1 Lean, CP 343-1 or CP 343-1 Advanced S7-400 with CP 443-1 or CP 443-1 Advanced S5-115U to 155U with CP 1430 PC/PG CP 1613 A2 CP 7515 SOFTNET-S7 or S7-1613