ELINDEX 0 0 E 01 Jul82 pdf

EL&

CLASS

DOCU-MENTS

EL .. 7665 I.DEI

Sect10n ~ 15-Jul-82 PIle 1

TITLE: EL .. 7665 CLASS DOCUMEIITS tHDEJ: - DOCUMENT LISTIlteS

ARSTRACT: Th1s index 1ncludes a list of all Digital Standar::h!, A_SP_7665XXX_X_X specifications, and manuals maintained by Standards and Methods Control. References to all documents contain latest version dates for the document. Standlrr.lS are listed w1th abstracts.

Th!s replaces the 8-Feb-82 version of this index, and status update~ EL.IMDEX-02, Revisions Band C, dated 31-Mar_82 and 1 14-l1ay-82 , respectively.

FOR I1f"EJl.IlAL USE ONLY

DAtE ECO , ORIGIUTOR APPROVED REV

30=Tu'"1'I-8d KLoot Digital Stds. Joe Kurta

-.--Administration

27-Mar-81 MLC02 DilitalStds. Joe Kurta Admlnistraticn

OB_Feb_82 111..003 DilitalStds. Joe Kurta Administration

15-Jul-82 MLO:)iI Digital Stds.

~

Administration

Document Identifier

Size Ifumber

R.,

DS

ELINDEX-OO-O

File Id: 16

~BmaDmD

..

•

E1. " 1665 INDEX

Section 0 15-Jul-BZ

•

_•

,

'-,

'-2

'-3

*

hble 1 • Table 2

• Table 3

SECTION 0 - DOCUMENT L.ISTINGS

Title Page

Table of Conter.ts/Re~i~ion Status INTR01)UCTION

~.

SCOPE RESPONSIBIL.ITIES

DISTRIBUTION RESTRICTIONS

STATUS AND REVISION NOlATIONS

STANDARDS MANAGEMENT INFORMATION

Digital Standards, LLlIted In Numerical Order, With Abst~acts

EL Class Manuals and Specifications

A_SP_7665XXX_X_X Specificatic'l3

SECTION 3 STANDARDS MANAGEMF.NT INFORMATION

OBSOL::TE DOCUMENTS

Page 2

Revision Pille

15-Jul-82 15-Jul-82

08-Feb-82 08_r'eh_82 08-Feb-8? 08-Feb-il2

OS-feb-il2

D8-Feb-82

08_Feb_82

15- 11..11-82

15-Jul-82

15_Jul_82 53

EL &. 1665 INDEX

Section 0 08-Feb-82 Page 3

this index contain., a complete list of Digital Standards, A-SP_7665XXX_X_X SpeCifications, and other document~.tion under EL class control.

1.2 SCOPE

1.2.1 Section 0; Il¢CuMent Li.!Itings

iable 1 lists each Digital Standard. in nU!Derical (DEC STD) order with the abstract and the current r",viston l",v",l.

Table 2 li.sts all EL cla.ss manuals and ~pecifications by document number and title. Each entry includes the reviSion Ie'",,' 1 , and, for manuals, an abstra<::t.

Table 3 lists each A_SP_7665XXX_X_X spec~fication i.n numerical. order with title and current 1'""evision level.

The Information Locator Ca :'!",parate document) contains two tables to help indiViduals find information:

Table 1_1 lists standards acc·,rding to specific teo~lrlical 3reas covered by Digital Standards. Thcse areas include Design/Drafting Sel"vice3, Documentation, Cl.Istomel· Services Systems Engineering (CSSE), Inspection/Quali ty Ccntrol, Hardware Engineering Design, 'lanuaIs, Manufacturing, Project Management, and Software Engineeri.ng.

Table 1-2 lists subject keywords for standards, manual, and sllecificattons and is al'"ra~ged alphanumerically to help peop:;'e locate ~.he appropriate source of inf<"lrmation for a particular subject.

1,2.3 S"etio!'l 2, Status Report

EL 6; 76E-S IIIDEX

Section 0

Addit!onal details regarding the status of current projects can be c.btained by contacttng the manager of Standards and Hethods Control, Joe !.:ul'ta, DTN: 223-8895, or tbe Writing GI'OUp Supervisol', Don Hebafhy, DTN: 223-37311

1.2.11 Sect'ol'l 3: Standards "ana,emel'lt Inforlllation

This section is published for the pUl'pose of resolving lIIanagelllent issue::. Refer to subbead 1.3.2.

1.2.5 Section ,,: Ob"olete Docu.ents

This section is used to keep tl'ack of Digital Standal'd" and otbel' doculllents that are no longer valid.

1 . 3 RESPOIfSIBI1.ITIES

1.3.1 Standards and MethodS Control

Tbe DigIt&1 StandiI'd" Adlllini:stratol' in Standards and Methods Control is responsible fol' maintaining and publishing tbi" index on a I'egulal' basis in aceordance witb DEC STD 001.

Standards and Hetbods Control is also I'esponsible fa!' the on-going eff'ol't to locate and identify individuals and organIzations that are responsible fol' keeping the documents valid and up-to-date.

1.3.2 Standal'ds "anag_ent

DIgital St,mdards, and the related manuals and specification!! tbat are pal't at' tile Digital St,mdard!! sy!!tem, are not developed, maintained, implemented, or enforced by anyone oentralauthol'lty. Instead, eacb :standa!'d or related document :specifies its unique malntenanee, impleDlent.tion, and, if neeessary, enforeement requirement:s. Tbis is accolllplislled by identifying within the document a perllon and an organ1:!:ation or standing committee that accepts responsibility for the document.

EL I. 7665 INDEX

Section !)

DISTRIBUTIOV RESTRICTIONS

D8-Feb-82 Page 5

Unless othe,.wlse specified, the docu~ents listed in this lndex a .. e cla.s:sir1ed "FOR INTERNAl. USE ON[.'1:". This means that the document i<lO not !;o be dht .. ibuted to non-Digital E'mployees unIes:s authorized by thll app .. opriate Dilital ~analer.

Documents th3t are distr1.buted to non-Oilital orlan1zation:s or individuals mu:st oontain the approprtate lelal notices, such as a oopyrlght notice, proprieta"y info .. mati~n statement, etc .• as spec fled by DEC STD 197.

Those document:s that, a,.e listed with the note "RESTRICTED :lISTRIBUTION~ are only dist,.ibul;ed to indivldual3 i!utho .. il:ed by the p .... son responsible fo,. the dtlcument, per DEC. 3TO 128.

STATUS AND REVISION NOTATIONS

"Iany of the documents listed l:! T .. bhs 1, 2, and 3 lnclude the note

This note l:'1dtcates that the docum.mt is a ne .... !lOCUlllent still 1n the p,.ooess of writing 0" revIew and has not yet been approved for .. elease or that a revi:sion to .. n ~xi3t.ing documer.t 13 in process.

p,.oposed ngw d.o<'.IU1e,;ts J n process will have revislon indl""atc,.s A(Xnn), ",here nn is the revie",ve,.3ion.

i'roposed revisions to existing documents will h~ve ,'evi3ion indloators that tn:11 ~ate the next sequential revisl.on after thec(.Irrent released revlsion, :'!(.Ioh as 3(Xnn).

Ne", or revised doc(.loents that h~'/~ nat !:Ieen approved for release are 'lnly listed in Tables 1, 2, <H 3 if the 0 .. 1ginator i!(.Itho,.1-;:es the distribut!anofa reView copy.

A stat(.ls .. eport ~f cur, ",,,t act i"li ~y i~ published 3epara~ely In Sectlon 2, Which is to be used as a supplen,ent tothls sectlon.

STANDARDS '4IINAGEMEHT INfORMATION

EL " 7655 !lfDEX Seetion r)

15-Jul-82

The st~t!d3rds "'~na,,~!Tl,,~t ~":at are c-"rre~:~,.

are ll~te,j ~n the fol~~"i!'lg ~har~:

CES CO!l!;>or.S'lt Eng.~~e~~:.,g _ ::;e"',-ra: r:=:S-:- :'O.,p"n('~t ~:1g;.~e~-~:~.g _ ,,,~t "Ie~~."cjs

SECTION

o

EL " 7665 INDEX

Section a

15_Jul_62

4 STANDARDS MAIfAGEMtHT CODES (Continued)

MPQli MPQF' "I?QK MPQL MPQP MPQQ MPQS MPQT MPQW !1PQx M?QY

Stantiard:s Manalllellt!nt Category

_ SDC documentation

_ Metal fabrication, finish ~ [~"-luct specific (inactive)

-Prt.lted circuit board - Quality a:s:surance/workmanshll> - Product safety

- System:s manufacturing _ Cable and wire specifi~ - Power :suppl;' - Interconnect technol<)gy

Product/Program Management

SAA Software and Arehitecture

SAAB _ Bus

SAAC _ 3ystem standard:S,data communic"tion SAAD - Software dooulllentation and vocabulary SAAG - Software standards, general SA.'.H -llardware, gener"l

SAAI -Interface

SAAK - Keyboard.!!, termil'lals SAAL - Label and file format SA AM - Software, languages SAAQ - System", languages

-Representation of data

[image:10.205.35.172.34.214.2]

TABLE 1

AB-STRACTS

OFDEC

EL & 7665 INDEX

Section 0 15-Jul-a2

Table 1. Digital Standards; Listed In Numeric Order, With Abstracts

Title. Digital Standards Syste. Policy

DEC STO 001, Section Q Re',1sion J Date: 27-Sep-j9 Abstract· ~stabllshes the poli~y regarding Digital Standards, describes the categ<:lries and levels of information included in Digital Standards, and deflne~ the re3ponsibilit1es and roles assigned to the various committees and organizations involved in the management and adroinistration of the Digital Standards SysteM.

SF-E STATUS REf'ORT FOR CURRE,NT ACTIVITY

Creation and Change Procedul'es

DEC STD OG1, Sectio!' 1 Revision J Date: 27-Sep-79 Abstract: Describl'ls procedures for the creation, rev 1s10n, release,

a"d distributicn of Digital Standards. SEE STATUS REPORT FOR CURRENT ACTIn;y

Title; Forllllat and Style Require.ents

DEC STO 001, Section 02 Revision J Date: 27-Sep-79 Abstract; De~cribe" the format and style ~eqC!irelllents and general

organization of Digital Standards. SEE STATUS REPORT FOR CURRENT ACTIVITY

~c Power Wiring, Safety Grounding, Receptacle and Electrical Rating Inforaation Requireaents

DEC STD 002 Revision C Date; 04-Deo-80

Abstract: Defines reqC!irements for ac power wiring and grounding, types of outlets, power cords and plC!gs, anj nameplates to be C!sed on Digital products.

• Title: Hardware Manual Standard

•

~~~t;;~t~O~stablishes plannin:~v;~~~~of,

contents, and

~~~=~t

24-Ju:1-82

•

~:~~~~~~~~;~ ~~~ ~~:t~~~~i~:;;o~C!f~e=:l

hardware

ma~uals

and

Title: Circuit Desi"n Gu1del1nes

DEC STO 'JO~ Revision A Date: 19-Jm:-70

Abstract: Presents d>!sign information, rules, and formulas for use in circ,Jit design. InclC!des g,Jidelines for C!sing active and passi,e components, printed circC!it boards, and informat.ion about circuit per;ormance.

•

~~~l;~n oo~~e~:~t~~~l

0 Alert

(~:!~!i~~O~edure

• Abstract; Describes how an Operational ALert (OPAL) :1Ies.5;;;ge aC!thorized and issued to stop shipment of a prodC!ct that • a :oafety defect 0:" a serioC!s functional de~ect.

[image:11.207.15.184.22.235.2]

El. " 1665 INDEX

Section 0 15-Jul-82

Table 1. Digital Standards, l.isted In NUlIIeric Order, With .lbstracts (Continued)

Page 9

b~~l;~D oo;~-:!~~;o~r~duct HO~~v~~~~~d~re

Date: D8-Feb-82 •

Ah:;ltract:

~:~~r}ibne: ~he P::do~~~ur~O/do~ ~~~Cinvgar:ou~rOdcu~:!!IU~niC:~t~~

•

SEE

STA.TlJSr~t~~~~m~~iscURRENT

ACTIVITY •

Title: Hardware Products lion-Compliant With Digital Standards •

~~;t;!~t ~o~~s~~~~!~n t~e reqUi~:~i~~~~e~ure

for

reportin~a~~~d~~;;e~h~~

•

SEE snTUS

d~E~~~T c~~~ltu~~i~T a~~ii~~~ie

Digital StandardS. . .

Title: Assigll.1ng Part Descriptions ::md Document Titles

DEC STD 006 ReVlSion A Date: 16-0ct-80

Abstract: Provides rules and requirements for naming parts and engineering drawings ... ith names that are brief, consistent, and follOW a uniform format. It ap;:..lies to the naming of all 50-19, 9~, and 95 inventory class parts and docull'lents. Title: Desig,l Review Process

DEC STD 001 ReVl!!ion C Date: '0-Nov-7~

Ab!!tract: Describe!! ... hat project~ require de~i!!n revie",s, how a deSign review committee is formed, when deSign reviews are held, and what the de~ign .. eview committees responsibilities are.

Title: Project Specification

DEC STD 009 Revision A Date: 31-May-68

Abstract: De~cribes requi.rement~ for a product. specification, including approval procedure, hard.nre, software, ccst. estimate, 3chedu~e, and deslgn reviews.

Engineering Product SpeoU'ications - GUidelines For Gener- • ating Electrical, Ph:r~ical, and Envirorullental Parallleter~. DEC ST:) 009, Section I Revision A Date: 25-Har-82 • Abstract: Dennes hardware information that is needed by Digital

personnel to accurately perform such task~ as prepare •

~~:~~~~~t~~;e~~d W~~!~a::~:5m;niut:;:.tur~t ~~~l~;:a~~e h:~~~:~:

•

EL & 7665 UIDEX Seoti· n 0

15-Jul-8Z

Table 1. Di&ital Standal'"ds, Listed In Mu.el'"lc Order, With lbst,. .. ots (Continued)

Title: Enlinearing Docuilentation Checkinl: Requil'"ellents Pale 10

DEC STO 010, Section

°

Revision B Date: 05-Au8-81 Abstl'"act: Defines the responsibilities of the checker in the acceptance and release of enginee .. ing documentation. Descl'"ibes wl,at inforillation is needed from Engineering and Design Sel'"vioes to support the checking p .. ocess.

litle: Ensineerins Doou.entation Checking: Dacu.ent Checklist DEC STD 010, Section 1 RotvlSion A Date: 05-Aug-81 Abstract: Provides a doeulllent checklist for checkers to ... se in meet-ing

Digital StandardS and dl'"aftlng requirements.

Title: Enlinee .. ing i)oeumentation Clleckinl: Pl"lnted Cll"eult Cheekl1st

DECSTil 010, Sectlon2 Re'l1s10n A Date: 03-0eo-81 Abstract: Provides a document checklist as guld,!lines ror PC cheekers to use in meeting Digital standa!"::!s and dl"aftinl I"equil"ements.

Title: Unified NUllbel"ing Code: Pal"t and Document Identifloai:.ion Convent10ni!ll

DEC STD 012. Section 0 Re'liSion F Da~e: 01_0ct_81 Abstl"act: States the genel"al policy gove .. ning the oomposition and fOl"mat of pa .. t and donument identifiel"s. It shows how ;la .. t and document identiriel"s a .. e to be structu .. ed, with descl"iptlons of all fields, and theil" uses. It also shows how to mBke changes to part Bnd docullient identifiers and how to detel"lIIlne what the ~top document" is fo.. a set of documents.

T1<:.1,,: :Jnlfied Number ing COde _ Mr:elllonie Drall~ng Codes DE(; STD 0 T? Section 1 ~e'llsion J Date: 27-Aug-81 Abstraot: ["'.les the reqUirements for the assignment or )1nemonic ~ '4es to all documentation undel" the scope of DEC STD 0'2. No code is considel"ed valid on documentation covered by DEC STD012unHtss listed he .. ein.

• Title: Unified NUlilberinl Code _ Class Codes For Pal"t Identifiers

• DEC STD

01~~dS~~~~~I'\~ Identi~!~~:ion

K Date: 15_Jul_d2 • Abstract: Lists pa .. t authorized fOI" use within [hgltal. identifers and documetlt 1.1entlfle!" class codes It ldentifles person!

[image:13.206.13.185.30.220.2]

EL ... 1665 INDEX Section 0

15_Jul_82

Table 1. DigItal Standards, Llsted In Humeric Order, With Abstract, (Continued)

Page ~ 1

Unified Numbe~inl! Code _ ?ackaged 3ys'::em Identification

':lEe ~,TC '')12, Section 3 ReVl~ion D :>ate: 27_Aug_cl

!.b~tract: Standar:lizes "he 3pp::'cation :;n~rl~d Numb"r.~.g C"de (~.HIC) r"r ldentlficatton "_umbe~~ ~or pac;':3i\ed sy~tems 'I1ark"~,,d and so~~ by

Title: U!"Jifiec NUlllbering Code - Software DL,trib",tl.on Center Part Nll .. bertng Conventio!"J5

DEC STD Jt2. Se~ti.o!"J ,. ~~v:ston ) Abstract: St 3 nd ard ~ ze, ::l" 3PP '- '-" a: ~or.

('JS':) fa,- : je" ~ 1 f ' 0 a: l" ~ cc~_tro, led by t"~ So(:.rare

Unified NU!IIbering Code -Manufacturing Control Part NUlllbering Conventlons

:~: 57') (;,2, 5e~tio'1 5 ~e'{:'s'~n !l Cate: 4bst,.act: E5tab:ishe~ ~be ~rJ~e1,"re ~~,. 33Si~~t"g J~:~,~j

:ode '-;)1:, ~ar'c ~_".,~e~s =y ~an:J~~ct:Jrln" :~ f'e~tol}.i~y :~ ""~~'ur'~g ,,~c ~Jntro~~:~g ~r::ce~~

',;l",,"

[image:14.206.17.193.33.218.2]

EL & 1665 IhDEX

Section 0

15_Jul_82

Table 1. Digital Standards, Listed In lIull'lflric Order, With Abstracts (Continued)

Tltle: Standard Englneering Drawing Formats ar.d Forms -Introduotion

Page 12

DEC ,TO 013, Section 0 Revuion 0 Date: 03-0010-81 Ahstract: Lists and describes all authorized engln~ering drawing sizes and format a and esser-tial preprinted forma u3ed by • SEE

STATUsE~H2~~r~~~ ~~~n~fs A~~1v~~~ineering

organization3.

Title: Standard Englneering Drawing For1l'ats and Forms - General Purpose Drawin'!: Si:r;es and Formats

DEC STD 013, Seotion 1 Revision D Date: 03_Deo_81 Abstract: Describes the drawing sil:es and for'llata established for

produCing general pu"pose en;inee .. ing d"awings. • SEE STATUS REPORT FOR CURRENT AC'!JVITY

Tttle: Standa .. d Englnee .. ing Drawing Forillats and Forll., - Pre-printed Special Purpo.,e Formats

DEC STD 013, Seetior 2 ftevision 0 Date: 03_Dec_81 •

~~~t~;~i~s Li~~~R~1~o~r~~~~~~ie1c;~~~~~e"ing

drawing fo .. mats.

Standard Engineeri:'!g Drawing Formats and Forms - Computer Output Drawing Formats

DEC STO 013, Section 3 Revision B Date: D3-0ec-81 Abstract: Establishes the computer_produced engineering drawing formats that are accepted fa!" use in place of, or as alternates to pre-printed formats.

Standard Ellgineering Drawing Formats and Forms _ Pre-Printed Formilo

DEC STD 013, Section ~ Revision 0 Date: 03_Dec_81 .<\bstract: Lists the essential pre-printed forms used throughout the

engineering organization.

Tltle: Stan:tard Engineering Drlowing Forsats and Forms - PC Mat:o. DEC STD 013, Section 5 Revision B Date: 03-Dee-81 Ahstract: Lists the PC mats ::urrently used for digitizing PC layouts

and provides ord"r information.

Revision Control For Engineering Documentation: Requirement.., and Method:o

DEC 3T0 DIll ReviSion D Date: 26-1>Iar-81

Abstract: Establishes a revision control scheme for engineering drawings and documents within the prelillinary, releas.!, and

[image:15.207.10.185.30.217.2]

EL .. 1665 INDEX Seetlon 0

15-Jul-82

Table 1. Dlgltal Standards, Listed In Numerie Order, With Ab"t.raets (Continued)

Title: Ab:'revi:ltions and Units or Measurement

Page 1::'

DEC S-rD 015 Revision B Ddte: ;3-Jan-71

Abst,.act: Requires that. documentation for comme,-ce in European Economio Community (EEC) use SI (metric) unit~ of measurement and unit symbols for all quantities, This standard al~o p'-o' .. ides abbrevi"tions for use on engineering <:!rawing.s, Convers~on faotor" for commonly used USA

SEE STATUS

c~~~~~~r~O~n~t~R~;~ ~~~~~~;~.

. .

Tale: Printed_Wiring Manufacturing Ter!l.inolog:r

DEC STD 016 Rl!visio!" A Date: 05_Nov_81

Abstract: Establishe" term" and def1niti;:>n" for consistent usage of printl'd wiring term~ in engineering and manufacturing documents,

Title: Digit.l OU'l1ty Policy

DEC ST!) 017 ReviSion A(:<02) Da~e: 21-Jan-82 Abstract: Summarize" all of Di.gital's design a.,d manufacturing policies that relate to the qual1t:r of products, Al.'!o provides the basis for detailed document.'! in each of the subject areas covered,

SEE STATUS REPORT FOR CURREn A.CTIVITY . .

Title: Cast.ing Standard

DEC STO 020 Revision A Da~e: 09-0ct-72

Abstract: Est ... bHshe~ rules and design guides to be used in the preparation of drawitlgs to define machined ca.'!titlg:l,

Cable and ~arness Documentation: Part Identification R~quirellent3

DEC STD 022, Section 0 R'!vi3ion 0 Date: 18-Deo-30 Abstract: Defines the part and numb'!ring sy~tem for cables and

harne3ses.

Cable and Harness Documentation: Drawing Requirements DEC STD 022, Section 1 ReVision A Date: 18-Sep-tO

Defines the drawing requU'ements for cable and harnes., design/"ssernb1y documentation,

Drawing Directory Requireml!nt3 _ ORB 106A, ORB 107, and ORB 108A ForGiats

DEC STD 024, Sectton 0 Revision C Date: 13-Sep_80 Abstract: Describes the dra"il'g directory us"d t<l list all dra'lLlgs

EL .. 7665 INDEX

Section 0 15-Jul-il2

Table 1. Digital Standards, Listed In NUllleric Order, Witb Abstracts (Continued)

• Titl., ' . . . i •• " , , " , , ' '.qui ••••• " _

DRB "" '0'."

• DEC STD 024, Sectton 1 Revision B Date: 24_Jun_B2 • Abstract:

~~~~~~~r;he f!~!~~ma~i~n f~6i7n\;~Xir:smenutssedfO~c ltttW~~t

• SEE STATUS

d~:~~~~s F~~d c~~~~:;ni~i~~~T;eqUired

to OIanufacture modules.

Title: Parts Lists - General Req1.Oirements

DEC STD 025, Section a ReviSion C Date: 26_Mar_8l Abstract: Establ-.she., the inforlllatton content ane! forlllat for parts l1:ol';s used 1n the design and manufacture of Digital hardware prJducts. The general requirements are provided for both manual and automated parts lists.

Title: tlanual Parts l.!.'!'ts

DEC STD 02~i, Section ~ Rev islon B Da te: la-Sep-BO Abstract: Provides detailed infor!llstlon requirements for !IIanual parts

list.,.

Title: Autoillated Parts Lists DEC srD 025, Section 2 ReviSion B Abstract: Provides detailed informatlon

parts lists.

• SEE STATUS REPORT FOR CURRENT ACT:::VITY

Tltle: DooulIlentatlon Requirements and Process For Internally-Designed Hybrid Asselllbl1es

DEC STO 026 Revi.,lon A Date: 5-Nov-81

Ab!ltra~"': Defines the requirements and proce:n for er:gineering .,lgn-off and control of an lnternallj-de.,igned hybricl a.,sembly and lt's related substrate.

Title: Phase ReView Policy

DEC STD 02B Revision A Date: 03_Dec_81

AbJtract: Defines the structure of the Phase ReView Process for both hardware and software products. It names the pha.Jes, establishes phase elit criteria, identlf1es a minilllum set of milestones w ... thln each phase, acldresses phase t>'ansition meetings and identifies reference information.

Title: Graphic COM 3ystell: Requirements and Procedures

DeC STO 029 Revision A Date: 03_Dec_51

[image:17.207.14.185.31.217.2]

EL & 1665 IXDEl: 15-Jul-82 Section 0

Table 1. Digital Stan4ards. Listed In Ifullleric Order, With Abstract.s (Continued)

:'ag. 15

Ti~le; Module Manufacturing Standard

DEC STD 030 Revision J Date; 15-Apr_82 •

~bstract; De~cribes the module manufa"tur1ng capability of Digital and the circuit layout standards and proceaures which allow that •

~~~~~;l\t:e t:ir~~itOP~;:t~~d'engiC~:::i~S f~~~ ~hn~ re~~ensollli~:i

•

~~~u~~~dU"cntdio~r~~~~t oii~ts/~~~a~~~d~~~~me

deliveries during • SEE STATUS REPORT FOR CURRENT ACTIVIT!

Product Serial1z;ation •

DEC STD 031, Section 0 Revision E Date: 15-Jul-82 Abstract: Defines the requirelolents for prodClct serialization and •

g~~~~~~s p~o~~~~~~~ serial numbering scheme and format for • PrOduct Model Changes

"EC STD 031, Section 1 Revision B Date: 15-JClI-82 Abstract: Describes how to label products that are [!!oCiified after tht! ~~~~~~;r~eri31 tag !'las been applied and before shipment to a

Title: Site Codes

DEC STD 031, Section 2 Revision B Date; 15-Jul-82 Abstract: Specifies how to derive 2-character site codes from the 3-character codes defined in the Digital Faoility Address Directory. Thi.:s is to accommodate the eXist ing processes, stamps, ~.ags, sy.:stems, forms and documents that are u.:sed bi manllfact"ring and engineering.

Title: VAX Architecture Standard

DEC 3TD 032 Revisicn A Date: 10_Jul_80

Abstract: Provides a definition of the VAX ~rchi.tecture. Frovides a 'complete description of th .. VAX centr\ll proces~or h"rdware as seen by machine language programs.

•

_•

•

•

•

_•

•

Title: Hierofilll Aperture Cards. - Creation and Distribution Process • DEC STD 033, Section 0 Revision a Date: 23·0ct-81 Abstrac':;: Describes microfilm aperture rard creation and distribution •

proce.:s5 for engir,eering documentation. It also defines the format and quality req<Jtremel'lts for microfilm aperture •

~:~~~~in~~~ :~"Oivr~doe;!il';h;'ef~~~~~~ll~~~t'a~o;.

establishing and •

Title: Hiorofllm Aperture Cards - Requir~.ent~ DEC STD 033, Section 1 Revision B

Ab.:stract: Defines the format and quality reqllirements apertClre cards of engineering documentation.

2 3-(' ~ t -B 1 micrOfilm

•

•

EL " 7665 INDEX S'1!ction 0

15_Jul_82

Table 1. Digital Stan'.lards, Listed In Numeric Orc'er, With Abstracts (Continued)

Page Hi

Title: Microf'llm Refel"ence I.ib .... ry Setup and Mainten .. nce Procedures DEC STO 033, Section 2 Revision A Date; 10-Apr-oJ Abstr.;:ct; Provides procedures for establishing a "'lcrofilrn Reference

Library for llIicrofil:!l ap~rture cards.

Title: Ha .. d ... re Manual Cov~rs: Content and Format lequirelllent.s -,EC S·W 035 Re",!sion I\. Date: 15-0ct-B 1 Abstraot; This standard defines the content and for'!ldt requirements fo,. the front ano back covers ano t"-e s;nn~s of 5-1/2 by 11 ino~ manuals and user g'Jioes identil'ter! and de.·eloped under DEC STD C03, HardOlar<, l1anual Standard.

•

b~~l;~D 03~~s~:~~i~~a~uat1on ~~:t~~~~l~~x~~~Ulrelllents

-

D~~~~r~t

_Apr_8?

• Abstr act:

§~;~eisev~~al2ual'i~~d

afndgt

~~~~~~~e·\n thteM/rSoycset~U;_ele~~t lOt~~~

i

~~

• of D1g!';;al's prod"cts. A. systems evaluation cons~ders the

•

~~~~!~~C,;;~~~. b"t~~~~ ados~oJ~:~~e dO;sch:[g~~r\~;O~UvCa\~~~t;~~

• SEe: STAT'JSP~~~~~~e~o~i. ~~~~E~~I~~; i:vi~~-11, and VAX- 1 1 environment,.

•

6~~l~~D 03~u3tOlller

Shipping

L~:e~~i~~q~g~~~nt'

Date: 19-!'1ar-02 • ~.bstract: ~;;s cuSsttor:udea;dSh~;~i~~' Lit::.,. for'.,.'t and content r~-:;u ire",ent3 . . SEE STATUS REPOW" FOR CUR~EST ASTIV!,"{

•

bgl~~!l 04~tne

Line Board

P!"o~:~~s~~~U!~~~;~ts

Date: 22-Feb_d2 . . I\.b strac t:

e~~~r ~~~~a ;~: ~~n ~~:~

i

~~ L~~sf~~~ e~~r~~o~~~

e f

~ n~

I

i~

n

~r~~~ r~~ ~

[image:19.207.14.185.32.229.2]

EL '" 7665 IIiDEll Section 0

15_Jul_82

Digital Standards, Listed In NUllleric Order, IHth Abstracts (Continued)

C_:stomer In:stallabilitj' -P .. oduct lIequireOlent3 Page 17

DEC S,;) J41 R"v'slon A Oat .. : ;:;~-Jun_1l2 D .. sC r i bes prod uet :les i g~ and p .. oees" requ 1r .... en t:5 Lor ha .. d"'ar" and so f~''''ar .. p .. oducts '.hat ar .. :0 b .. in.'ltalled ~y th" custonler.

Hard .. a .. '" In:stallati'ln Hanual:s For C"stollle .. -In:ltallable SY:5tellls

DEC 3,:J J.;2 ~"'{:'3'on A( .CJ2) Da~e: 29-i\.pr-32

Ab~tract: £.'1 tab 1 i .'Ih .. " ~ eq" ~ re,.e"t" ~or c ustmr. .. r na r 1"ar.. in" t a llat.l 0"1

,.-n:.Jal., fo.· ~u!lto",e~_~n"tailable "I"te .. ". wefl~e." tne r .. " pons i bi 1 i t i .. , 0 f "ac h ~~oup a,s'''':;. at .. d "it h the d'!"{"lopment of !lucn "1Ia"ua:3, explain" conr"rmance, jerines tar~ .. t audience, o:.Jt~i""!I '!Ianual obje~ti.ves, and j~"~J""es "tyle, 'lI3nual cont"~t ~nd pr::>ductlcn re:jui,.."", .. nt,3. 3<:E STU'jS R'.:pan FaR S~RHX:-A::I'IITY

Title: Corperate Supplier ?ackoging Standard ~o.: STD 043, Secti.o" ') Re'{~'lQn .~(X:l~' Abstract: Cesc .. !.bes :~~t~a:'3 :n~~erlal h~njli~~

requi .... l!!ents ~~ ~e~lI!1 Jf ~artJn!l and pa:_ets, 3i.Z" , ""i.gr,:. ,abel~.~~. ar.d "n"{c~onm .. nta: ;~:>~"~~lcn apply to !lhlp",,,nts ~r~ .. 3upplar!l ard bet"e .. " "lants. SEE

sn::.rs

~£P")RT FC1? ~JR~;:~-:- A~::HT'(

Corporate Supplier Packaging Standard -Sheet, Blanks, Or Coils or Steel Or UUlllirlulII

Cl'.:: 3,:) ~~3. 3"C~l.:Jn 1 ?"·{~3l.C~ :~~,,: 1,_J,,~_a2 "bst,'a"t: SD"~i.~le" Jig~:3:'3 t.~~ "a~,(aglng 'If st .. e:

and al:'ll"::1"rn she'!:. ::;;;£ 3TA;'JS HPClR: "'":R ':·JP.R::~:

..

_{.. ..}

.. ..

_..

.. ..

.. ..

..

..

..

.. ..

•

.. ..

..

..

..

..

EL &. 7665 lIDEX S<!:ctlon 0

15_Jul_R2

Table 1. Digita::' Standards, Lll1ted III Numeric Drdel', With Abstracts (Continued)

•

~i~I;~D o~~a

.. Code SyPlhology Revision A(X01) Date: 25-Jun_82

• Abstract:

:;~~~~~:y~Uid~;;n~~ ~o:r t2:deuni!~;~s a~~li;:~;~~t:,f ~~~u~~~:

•

~~~~~:~~b;~:~

i

fi"; i

;~;,"a~~~<,:e ;:::~

1 s

paa~:ag;;:cr~~;~~ i~lsS a~:

• the guidelines for use of labels in product traceability ane i.lventory cor.trol .

. . SEE SHillS REP-ORT FOR CURRENT A.CTIv:n

Title: Standard Coded Character Set

DEC SiD 051 Revision A. Date: 06-Ncv-1D

A.bstr'l.ct: Defines preferred character ~ets to be ulled in hardware printers and displays and in 'loftware programming. This standard embodies the American <fat-ianal Standard Code for Information Interchange (A.NSI X3.~-'968) as a subset.

Operational ReQuireillents For Serial Terminals and Serial. System Interfaces Operating as DTEs Connected To ErA. RS-232_C or CelT! V.28 P-oint-to_Point Modems; Terminology and Requirements

DEC STO 052, S'!ctlon 0 Revision A. Date: 06_Nov_8D A.bstract: Signal definitions and special terms use-J in Serial Data

Communications.

Operation"l Requirements For Serial !er!:linals and Serial Systelll Interfaces Operating all DTEs Connected io EIA RS-232_C or CCITi V.28 POint-to_Point Modems; Operational ReQu!reBent:o.

EL & 7665 HIDE! Section 0

15_Jul_82

Table 1. Digital Standards, listed In Mu~eric brder, With Abstracts (Continued)

DEC STD 052, Section 1 (conti:lued)

Page 19

CCITT recommendation V.28. This sr.andard also COVerS ~anual and automatic disClonnect.ion of the DTE at the end of a call. The operational characteristics also aoply to m~ny case~ where the electrical ~nterfa"e doe~ "ot conform to RS-232-C or V.28; fo,.. exalllple, a ~odem integral to ~ te,..minal. 'Utle: Electrical Requlr_ents For Binary Inter1'aces That Conforlll

To EIA RS-232_C or CClTT v. 28

DEC STD 053 ReviSion A(X03) Date: 13-Jun_80

Ahst,..act: Defines the lIIinimum electrical interface requi,..e~ents fo~ the d,..ivers, reoeivers, and inte,..connecting cable used to connect DTEs to DCEs and modem:! in accordance with EIA RS-232_C or CCITT V.28.

SEE S'U!US REPORT FOR CCiRRENT ACtIVITY

Title: Purohase Specif"ioations: Guidelines

DEC STD 055 Revision B :late: 2'1-May-79

Ab:!tra~t: Establishe:! the general instructions and "'e:!pon:!ibilities 1'or the preparation and control of Digital

SEE

STATUss~~~6gcn~0~~RRENT

ACT1'IITY •

Title: logic Symbology - Circuit Sohelilatic Requirelilents DEC SlD 056, Section 0 Revision C Date: 27-Jun-8D Abstract: Establishes the format and requirements for Logic Symbology ,;sed by Digital Equipment Corporation including the requirements for schematic logic diag,..ams, and tile composition and form of symbols. This section also ~!~~~;oiks.hes general guidelines for a Logic Symbology

Titl~' Symbology -Distinctive Shape logic Symbols

lEC s~o 056, Section 1 Revision C 27-Jun-80

"bstra"t: PrOvides detailed ,..equirements for the use of distinctive-shape logic symbols in schematic logic diagra~s 50 that logic functions may be understOOd directly from ~ithe,.. the shape of the symbol or the nLltation within the sym::>ol.

Title: COlilplex (llni1'orlll_Shape) logic Symbols

DEC STD 056, Sectton 2 Revisic>n C Date: 27 ·Jun_80 Abstract: Provides detailed requirements for the use of complex (uniform-shape) logic symbols in schematic legic diagrams.

£L & 7665 INDEX

Section 0 OS-Feb-S2

Table 1. Digital Standards, Listed In Numeric Order, With Abstr-a..:ts <Continued)

Title: Electrical Interconnections Betveen Grllphic Symbols Pase 20

DEC STD 056, Se<:!tion II Revision C Date: 27-Jun-80 A.t>!':Itract; Specifies the requirements for electrical connections between logie symbols, and provide:! rules for the !.I:!e of :!ignal mne~onics in the connections.

Title: SymboloSj - ... iver:!

DEC ST;) 0:;6, Section 5 Revision C Date: 27_Jun_80 Abstract: Establishes the procedure:! and requirements fer obtaining

waivers and exceptions to this :!tandard.

Title; Symbology - Glossary of T"rlll:!

DEC STD 056, Section 6 Revi:!ion C Date: 27-Jun-BO Abstract: Provides definit!ons for certain terms used in DEC STD 056.

Tlt'.(!: SYlIIbolcgy - Current Logio fUllction LabeLs smd Current ?in Label Definition:!

DEC srD 056, Section 7 Revisio'! C Date: 27-Jun-BD Ab:!~ract: Provide:! a list. of current 10g1.c function labels and pin

label definitions.

Title: Incollling Inspection Procedul""e:s: General Policy DEC STD 059, Section 0 ReVision B Date: 23-Jul-81 A.b:stract: Establishes the general policy regal""dinK requirements and

r<!:!ponsibilities far Incoming Insp.,ction Pl""acedures.

Title: PAVES Incollling Inspection Doculllflntation r.equlre1ll.ents DEC STD 059, Section 1 Revi3ion B Date: 23-Jul-Bl A.b"tract: Descl""ibes require~ents for the In<::omtng Inspe~tion documentation on the Pal""t. A.nalysis 'lendor Evaluation System (PAVES).

Title: Incollling Inspection Procedures _ Ketal Fabrication And Plastios

DEC STD 059, Section 2 ReVIsion B Date: 23-Jul_Bt Abstrac~: E:!tablishes a llnifarm OIethod fOI"" generating, ~ontrolling, and distributing Inco"!ing Inspection Procedures (II's) fOI"" metal fabrication and plasticS.

EL & 1665 IMDEX Section

°

15_Jul_82

Tabl_' t. Digital Standards, Listed In Numeric Qrder, With Abstracts (Continued)

Page 21

Title: Design and Certification Of Hardware Products To National and International Regulations and Standards

DEC STD 060, Section a Revi~ion n Date: t6-0ct-8Q Abstract: Oeftr.es the intentions, responsibilities and con':.rols for designing and certifying Digital hardware products to meet the requirements of nationally - and interllationally reco!,:nized organizations.

SEE STAtUS REPORT FOR CURkEHT ACTIVITY

Title:

~:~i~~t:~:JI~~~~!ii~:!~~:t~~n~a::~a~~a:~~~~~t~ ~~e:~~~~nal

• DEC STD

06~~q~!~~~~~t~

Revision C Date: 18-Mar-82 • Lis',:s the specific Digital standar<is and elternal • regulations and standard:! that apply to Digital':! hardware product designs I t al:!o lists requir!!!!lents t'1at have been • investigated ad fOllnd to be not applicable to Digital's

SEE STATUS

h:~~~~~e Fg~o~~~~E~~si~~~VI1"!

•

Title: Product Sub.tttal To U.S. and Foreign Agencies

DEC STD 062 Revision A Date: OS_Nov_Bt

Ab:!tract: Defines the various agencies around the wcrld to .. hich our products mu:!t be sU~'lIIitted. Thl:! standard also identifies the Digital people 1:' various cOllntries who submit our products to these agencies, the submittal p,..ocedure.s, and SEE STA rus

1~~;5H-;~~d~0~~E~~b~~i~~!t~OCedures.

•

Handling or Electro:static Sensitive Device:! - Procedures and Protective Materials

DEC STO 067 Revislon A Date: 17-Sep-8t

Specifies the prop"'" method.s of r:and~_ing cOlllponents that are .senSitive to electrostatic discharge during a:!sembly, test and field repair or ~etrofit. SpeCial materials and handl!ng methods to be u,;ed aLJ,..ing manufacture and shipping are listed and described.

Fini:sh and Color Standard _ Introduction and General Require .. ents

DEC STO 092, ~ection G ~e"ision E Date: OS-Noy-Bt Ab,.~.,,~ct.: This section describe'J the content of sectl.ons t th,..ough 5,

and the "u"'pose ard use of each section,

Til:le: Finiah and Color Stan~ard - fir1sh S.tal'ldard for Applications DEC STD 092, Section t Revisior. E Date: v5_Nov_Bl Ab:!tract: Thi~ section descrlbes the Digital finish nLJmbering system, and is intended f)- those '.;ho .. ill apply the finish to manufactured parts.

EL &. 1665 INDEX

Section 0 lS_JuJ -8~

Table 1. Digital Standal'"ds, Listed In MUlllel'"ic Ol'"de"', With Abstl'"acts (Continued)

Page 22

Finish and ColoI'" Standa!"d _ Finish Hatel"i"l Standa!"::! for-Suppl1e!"s

DEC STD 092, Section 2 ~evi~iC'n E Date: :lS-Nov-31 .~b~tl"act: Thi.'S .'Section defines the pr-oceGuI"e to be fellol.led, and tne

I"equi!"ements to be met, ~"f fini.:sh mater-tal supplier~. Title: Finish ana Color Standard - Finll1h Haterial Te.:st

!'Iequil"e .. ent.:s

DEC STD 092, Section 3 Re·Ii.'S~on E Date: 05_N"ov_51 Abst!""ct: This section defines the te.:st !"equil"ement3 and test :nethods

apOllied to the finishes ".'led fo. D~git"l p~rts. Title: Finish and Color Standard -Approved Fin1.'1h Specifications DEC STD 092, Section II Revision E Date: C~_!io,_8' Ab.'ltr"-<'t: This section cont"ins a complete list of .'I~ecific"~ions for

finishes approved f::II" use on Digital p!"odu.:ts. :;EE STATI':; REPORT FOR ClJRREH ACTIVITY

Title: Finish and Color Standa!"d _ Digital Color List DEC ~1"n 092, Section 5 ReviSion E Date: 05_Nov_81 Abstract: Tr1is 3ect ion contai~s a list of currently approved :)i gital

col:>rs and color identification nUlllbe!"s.

Fini.sh ... nd Color Standa!"d - Digital Approved Paint Supplier.ll and Haterial Identification

DEC STD ()92, Section 6 Revision A(X03)

c. ..

te: 26-May-82 Abstract: This section is 3 guide to the procurement of pr~t(!ctive and decorative industrial coating3 ani pai~ts u3e<.l "or (ll"oduction applicat i:Jn.'l on Dig~t" l-app!":>',ed substrates. SEE ScAnS REPORT E'QR C:JRRnC' ACTrVITY

. . ~;~~;~a~n~d;~~~~i~;~~~~rd - Pla.:stic Color Control and . . DEC SID 092, Section 7 Revisi.on A(;(03) Date: 26_Hay_52

Abst!""ct: oefln.", guidelin .. ~ to ensu!"e that color-impregnated pla.'ltlc.'l • u~ed by Digital exhibit acceptable color drift . .

~r;~:a~t~roi~~

i

~~nt~~~ s~:~~~c;o ~~t :~;lm/yt ~~atuSa~~ ~

i

~;;:;ve,

. .

~~~ ~~~~~e~;laa}sl 3~;3~~~~a~~~.~~~ ;~omenaslu(

..

ern~~~or3o~~~~~~m:~~

. .

~g:U~~~c;~;t oJl~::;r:;~;d~;; :{30:te;ct\eO.slO~ref'~~~1;~~~~~e.d

:

~

. . SEE STATUS REPORT FOR CURRE~n ACTI'/rTY

Title: Finish SpeCification U92-A10X-XXX: Smooth l'aint FiniSh

092-0~_A10X ?"Vlsion A Date: 05_No·,_dl

Title: Finish Sp.:-ciflcati.:)n 092_A11X_XXX: Smooth Paint Finish

EL &. 7665 IMPEX Section 0

15_Jul_82

Digital Standar-d5, Li5ted In Numeric Or-der, .1 th Ab5tr-act.'> (Co"ti"ued)

Palle 23

Title: Fl"i5h Specificatlor! 092_A12X_XXX: Smooth Paint Fini5h

092-04-'" 12X Revisl~n ,~ Date: CS-tbv-81

Title: Flni5h Specification 092-,\'3X-XO' Texture Paint Fini~h 092-04-:' 1 3X Revi 5~;)r. A Date: 05 -NC'v-8 1 Titll!!: Fini5h Specification 092-AlItX-XXX Telture Paint finlgh 092-,.14-.1. 1 Ill{ Re'Jlsion A :late: 05-No'J-o'

Title: Finish Specification 092A15'_XX:1 Texture f'ai"t flfllsh

092-04-A15X R"H!!ion ,', Date: J5_Nov_81

Title: Fini:Sh Specifl.;ation 092-A16X-:<X Marlung Pa~nt finish

092_0~_A16X Re"i!!i~n A DHe: J5-Nov_8:

Title: fini5h Specification 092_A17X_,U:r Clear Hard Coat fin15h 192_04_.1. 11X ~e.:'~bn ~ ",ate: J;-lIo,-81 Title: firlt~h Specification 092-A~OX-XXX Surface Pr-eparatlon Finish

:192_04_A40X ~ev'-~Ll~ f, Jate: 15_Nav_3'

Fi!li5h Speclf'tcdtlor! 092A~lX-XXX T'Htur .. f'aint Finish for Pla3tic Coyer~

192-0U-~U1X :h~e: J5-_~0"_3'

Fir!'!!h Specific~tion 'J92_1145X_XXX C~t>inet I"terlor Protec~.ive Finish

'J 9 2 - ,; 4 - II 4 0; X J:; -~'" • -3 '

Title: Finish Specificatlon ;92-A.i\6X-XXX ~ylon Coati.ng Cl92_011_A46X

'e",-"

'J~ .1. Ja':e

Flnish Specificat:on ~92-A60X-XXX Uretha"e Coating For i'tagr!ets

892 _DU_AiO')X ,-~ 1

f"inish Specification A092-805X-XXX Zi"c Plate lOitn Yellow Chromate

G92_~U_9C-5X J5-~""J-3'

Finish Specificatl~n 'J92-tl06X-~Xx ~~;'Ic Phte 'ht.h Yedow Chromate

J92_04_B05X

092_90ax_xxx Zinc P'3te \/1 tn Clear

EL • 7555 IIID!:X

Section 0 • 5-Jul-82

Tahle 1. Digital Standards, Listed In NUllieric Order, With Abstr-ac':s (Continued)

Title; Finish Specification 092_B301_XXX Mickel Plate Page 211

092_01l_B30X Revision A Date: 05_Nov_51

Finish Specification 092-C20X-XXX Chemi<.al COllver-ston Coating

092-04-C20X Date: 05_No"481

Title: Finish SpeCification 092-C21t-XXt Chro.ieoat _

Clear-092_01l_C21X Revision A Date: 01_Ju1481

Tit! .. ' Finish Speelfication 092-C251-XU Surface Prep .. ration for Paint!ng

092-04-C2'5X Date: 05_Nov_51

T1th!! Fini"h Specificaticn 092_C28I_IXX One_Co3t Conver"i~n Coating For Mon-Fer,'"'''' C,uting

092-01l-C2Sr. '1evision A Date: 05_N:lv_51

Title: Fini.sh Specification 092C35X_XXX Ano::l1zing (S\llphuric Acid)

092_01l_C35X Revision A Date: OS_Nov_81

Title: Finist. SpeCification 092_C36X_XXX Anodizing (Chrolllic Acid)

092_01l_C36X Revision A Date: 05_Nov_81

Title: Finisn Specification 092-C38X-XXX Black Anodizing

092-04-C38X Revi:5ion A Date: 05-Nov-81

Title: Finish Specification 092-C39X-XXX Anodic Hard Coating

Oc,,2_04_C39X Revision A Date: 05_Nov_81

Title: Fini"h Specification 092_C50X_XXX Black Odde

092-04-C50X Revision A Date: 05_Nov_81

T1 tIe: Engineering Change Orders

DEC STD 100 Revision E Date: 12_Jan_78

Pertains to a uniCied procedure for 3ubmi.::!.::!ion of Engineer-ing Change Order3. All engineering drawing.::! and documenta-tion Ciled in Engineering Document Control Centers can only be changed by the procedures ou~lined herein. ECCs are controlled a::d issued by the Engineering Services groups within Engineering.

SEE STATUS REPORT FOR CURRENT ACTIVITY

•

~~~I~~D

1

o;~g~:~~~;~g

1 Change

~:e~~~o~ ~~~~~~re

Date: 23-Jun-80

• Abstract: De.::!crihes the policies, procedures, and guidelines llsed to create ECOs for Digital hardware. It also specifies the :

~::f~tdSu~~; l~~~e~rg~~~ za~f';;.::!S

t::tS

i~;:adte

,t

0adm\~~3t;~~ i~~~

EL " 7665 INDEX

Section 0 1"-Jul-82

Tacle 1. Digital Standard", Li.!!ted In NUllleric Order, With Abstract.!! (Continued)

Title: Engineering Chang" Orders (ECO) _ Engineering ECO Coordination Procedure

Page 25

DEC STO 100, Section lA Revbion 8 Date: 17-Jun-81 Abstract: Defines the procedure used by an Engineering ECa Coordinator' to .!Iupport the ECa p~oces.!! for Digital hardware. The procedure for the overall proces.!l 1.!! given, together with a me':.nod of handling .!!upplement ECO.!! and for validating or a.!!.!!i.!!ting in determining which enginee"s a .. e .. e.!lpon.!!ibl~ fo .. a specific ECO p .. o~e.!!.!!.

Title: Hardware "'CO For. n-oce,.lu"e

DEC SrD 100, Section 18 Revi~lon ,\ Date: 07-Apr-81 Ab.!!t"act: Define" procedu"e f"r filling out ECO face sheet and

aSSOCiated forlllll required fo .. hardware ECO. SEE STATUS REPORT FOR CURRENT ACnnn

Engineering Change Order.!! (ECO) _ Financing ECOa To Hardware . .

~~;t~!~t;Dg~".;;n~~n

t1hCe

POli~~via.!!nidon p~ocet1ure

for

fin~~~~~gDttoa.!lY-~~

. .

hardware. . .

Title: Engineering Change Orders _ Purcha.!!e Specificat.ions DEC SrD 100, Section 2 Revision F Date: 20-Hay-82 Abst""ct: De.!!cribes the policy and procedure for changing purcha.!!e .!!pecificatlons. Also specifies re.!!pon.!!ibilltie.!! and role.!! assigned to va .. iou.!! indiViduals and organi';!;ation3 inVOlved in the purcha.!!e 3pecification ECO prOCeS.!l.

Diagno.!!tic ;ngineer-lng Cnange Ol"del".!! and Patch Ol"der.!! (DECO's and ,)EPO'3)

DEC STD 100, Se~tion :: Revi.!!ion F Date: 14-Hay-81 Abstract: Desc .. 1Les the polieie.!! and p"ocedures f~r the administ .. atlon and control of diagno.!!tic engineering change order.!!, patch order3, and submi.!!.!!ion.!! of new diagno3tic product3 to the Software Distribution Center.

Title: Oiagl'!<;>stic Enlin.~ering DECO/DEPO Sub.i3:sion Forll; Procedul"e DEC 51!) 100. Section 3A ReVision A Oate: lU_Hay_81 Ab3tract: Define.!! the p"oce.1ure u.!!ed by Dlagno.!!tic Engineers to fill

out the DECO/DF-PO :::ubmissi-:.n form,

Title: ~::~;a~~~~~;ga~~e~:~!~~:m:~~: for A.!I~embly, Inapection, and •

~;;t;!~t;O~l"e.!!ents

a policy

R~:~Si~~eD

3tl"l,ctClre of

aoa~:~u~~~~~~~~~

•

~~:~~~ iO~~u[~:~n["~o

..

apl~ra~ri~~u.C\h ;;n~:n~~~c~~:~ ~~ S~~~r~ ~~~~~

•

~L & 7665 INDEX Section 0

IS-Jul-82

Table 1. Digital Standards, Listed In Numeric Order, Vith Abstracts (Continued)

Page 26

Environllental Standard for COQPuters and Peripherals -General Test Require.ents

DEC STU 102, Section 0 Revisi.on D Date; 18-Mar-82 Abstract; Defines the environmental conditions to .. hich products marketed by Digital Equipment Corporaticn must ccnform befo,..e !:leing considered accl>ptable for p,..oduct announceellent.

• Title; Temperature, HUlllidity, and Altitude Te.,t Requlre"ents

•

~~;t;~~t ~0~~fI~~;10ennv~ronment~ri~{~~sPfications

and

e~ta;~{isl:e-;a~::~

•

~:~~;~:~~~~~ h~~e~~itt;, :~:u~~t1~~~; r~~ru~wra;meen~;~ducts

Oleet

Ti tle; Mechanical Shock and Vibration Test Require.ents DEC STD 102. Section 2 Revisicn D Date; 18-'1ar-8:;> Abstract; Establishes the levels of !!Iechanical shock and vibration

that hardware products !!lust be able to withstand.

Title: Physical Stability Require.ents During Shipping and Handlin~ uEC STu 102, Section 3 Revision D Date; 18_/4ar_82 Abstract: Stat"s the physical stability ,..equirements for h?rdware products that are designed to be f,..ee-standing IOhen installed. Two product states are considered: the ~-oduct as lr,stalle-:! and the product as shipped.

Title; Acoust!c :foise Test lIequire.',Hlt3

DEC STD 102, Section 4 Revhion A(X01) Date; 01_Sep_B1 Abstract: Specifies unifo,..m procedures for Oleasuring and repcrting

acoustic noise emi.!!sion. SEE STATUS REPORT FOR CURRENT ACTIVITY

Title; EHI/Eleetrolliagnetic Interface

DEC STD 102, Section 7 Revision B Date; 09-Nov-18 Abstract' Defines the electromagnetic envi,..onment that Digital product.!! can be expected to be subjected to and define the limit:! of the electromagnetic interface that the3e devlc"s are allowed to produce.

SEE STATUS REPORT FOR CURRE!fT ACTIVITY

•

~!:~~~~::~~:tiO COllipatibility (EMC) Hardware Desigll • DEC STD 103, Section 0 Revhion A.(X01) Date: 16_Jun_i32

Abstract: Thi.!! level 1 standard defines the limits ,,c electromagnetic • i.nteraction between any cf Digital's hardware .,roducts and it'.!! environmeni:. It outlines measurement methodology. • acceptability crite,..ia. and responsibilities. Section 0 i~

an overview.

EL • 7665 IIfDEX Seetion 0

15_Jul_ti2

Table 1. Digital Stanjards, Listed In NUllleric Order, Wttb Abstract" (Continued)

Title: FCC Labeling And User Manual Inforlll'ation

Page 27

DEC STO 103, Section 1 Revision A Date: 18-Dec-80 Ab.'3tr~ct: Provides an overview of \..he process for labeUng equipment anc.: medlfying U.'3er manuals in re.'3POnSe to FCC regllations cited in FCC Rules Part 15.J.

~i~l~~D 10~:C s:~~i~~III~!ianee i:e~!t~~

B Date: 2-Nov-81 •

Aostract:

~~~~~;~~~ ;~:t PhoalslC~0/O~ee~ab:;;~lie~PP;;c~~~~ifDlieg1it~;

• ~~~~~Ying with FCC regulations cited in FCC Rule.'3, P"rt . .

SEE S'!'ATUS REPORT FOR CURRENT ACTIVITY .

-Title: FCC Ifon-lierifi.;!ation Labeling

DEC sro 103, Section 1A Revision C(XOO) Date: 16-Jun-82 Abstract: Describes the poliCy for labeling a~plicable Digital Equipment that ha! not been \'erified or certified as cOOlplying with FCC regulations Cited in rCC Part 15.J. Be-cau!e non_verifi.cation labeling will only be requi.red and perlllitted for a certain tiOle period and under certain circumstanCe!, this section of DEC STD 103 is expected to be '/aided and not applicable to most Digital prodllcts in the near future.

SEE STATUS REPORT FOR CURREtfT ACTIVITY

Title: FCC Compliance Labeling and User Inforllation

.. ..

_..

..

..

_..

DEC S7D 103, Section 1B ReVision A(XD2} Date: i6-Jun-82 • Abstract: Describes the policy for labeling "pplic~ble Digital

equip;nent that has been verified or certified as complying • SEE STATUS

w~i~o~i\~;g~~~~;~~\~~i~~T~n

FCC Rules, Part 15. J. •

Title: rCC COlllpliance Equipllent User Infor!lletion

DEC STD 103, Section 1C Rension A(XOO) Date: 01-0ct-81 Abstract: Describes th!! policy for assocIating ll.'3er information with Digital !!1uipment that has been verified 0;- cert.ified as complying with FCC regulations cited in FCC Rul'!s, Part

15.J.

SEE STATIlS REPORT FOR CURRENT AnHITY

Title: FCC Certification Approval Process

DEC STD 103, Section 1D Revision A(:<OO) Date: 04-Jan-82 Abstract: De.'3cribe~ the process for verifying or certifying Digi.tal equipment.. as complying \<lith FCC regulations cited in FCC Rules, Part 15.J.

EL &; 7665 INDEX

Section 0 15-Jul-82

Table 1. Digital Standards, l.ist.~d In NUllleric Order, With ltl'tracts (ContlnL:edl

• Title: Electrcmagnetic lnterhre::tce (E"'I) Control

•

~;;

t

;~~

t; 0

5~ f~r~~~

i

~~e

2

i~t erna~a~i :~~~

1 A

~~~~ ~

remencs

•

:~;~'~·~Oal103y,

l:ngda \he

r~;~et;nea~e~~~rovaabr"~~oce3s.

• SEE STATUS R",PORT FOR ::URREN", ACTIVITY

Page 28

•

~~~l~~D 10~~e~!~~~~~n~t1o !;Us~:~i!~;~iir x;~jgl;

IlIIlIIuni ty

D~~~~r~Ljun_82

. . Abstract;

~~~':~3fe;te3a: ;;t~~di:~e;~,~O~~g~~~~~:D/;~m"Urnsl,~Ya~ l::~i;; a:g~~~:~

• SEE STATUS e~~~6~~m:8~eg~R~~~cl~¥~vt~ilution from i"d ~strial 30urces. Title: EI"ctrostatic DIscharge (ESD) Control

DEC STD 103, Section ~ Revi.'!ion A(X01) Date; 16-Jun-82 Abstract: Defines the test oonfigurations and a""eptabi~ity

for ESD control of EDP and office eqUipment. SEE STA.TUS REPORT FOR CClRRE~T AC7IVITY

Title: Product Acoust!c Noise Acceptability

DEC SID 104 Revi3ion A(X04) Date: 14cJUL_82

.~bstract: Defines acceptability criteria for acoust~c nOl,e emitted f,.oro digital p~CdUGt3 and groups of products.

SEE STATUS REPORT FOR :URRE~i ACr:'lITY

Display Workstation Ersonolllics (Human Factor.,}; De3isn Criteria

:lEe: STD lOS Ab .. t,.act: Provides

di3play well_beir,g

Title: S&andard for In-Hou3e Acceptance Procedures

DEC STD 106 ReVlsion A

[image:31.207.14.185.28.219.2]

EL & 7665 INDEX Sect.1on 0

15-Jul-82

Digital Standards, List~d In Numeric Order, With Abstracts (Continlled)

Page 29

Digital Standard for Terminal Keyboards Registry Of Graphic Character S~ts

DEC STD lQ7, Section 1 Revisi:Jn B Date: 06-Aug-81 Abstract: Deftnes the grapnic character sets to be used for Digital hardware and soft .. are products for info,-"'ation interchange. The definitions include code generated by each graphic character.

Titl",; OEC Standard for Escape Sequence

DEC STD 110 RenSlon

a

Date: 07_Mar_75

r"dtscriruinate echoing of ESC as 33 3 Is pr"hlblted it is desi,-able to ;:>rint sO!lle displayable character to provide viSible cQrl[lrmation that ESC has been received by the p,-::>gram, then ~h3t character must bi! Single dc~lar sign

g~ (~:~~~~c!S;n

1

s Estpe"""cyha;

:~,-t;rno"no\~h~r i~~~~ ~~ ~~ ~;;~:ni~~u:~

ESC currently has !!!any :>ther meanings. Applies to all n"" DEC terminalS.

MetriC' Dll!1ensiontng on Engineering Dra,",ing~ _ Gene,-al Requir<!!lIIents

: 1 ~ Revisi-cn A Oat .. ; 2"-.\.',g-3a Pre3ents r"q-Ji,·em .. "ts fer ~onvert.1ng from the ~~.ch t'"> 1;~." Illetric system .hiLi! :1l3".~t~l.~i~g lnte,-change~bill:/.

SEE STATUS REP~R, F~R CURRE~7 ... C:-:';::-~

Engineering Drawing Requlrelllent!l _ rndu.Hry Stand .. rds Adopted by Dtgital Engineering aMJ ManufactJrinll Doc'JlDentatiol"l Organil'atlon.,

DEC STn I 1~, Section j Rev1 ~;),". 3()')C Abstract: ~ .. fin ... ~ ~he 7~~u~~rf S~~n~3["js J.".d

requirements ~~r ~";(lr,eerl~~ D()c'~",e~tat"J~ DlgUal.

SEE STAT'JS REP')RT FOR :URflEliT A:Tl'I,-Y

•

•

'II

EL • 7665 IWDE:[

SeC!Uon 0 15-Jul-82

:.ble ,. Digital Standards, Listed In Nu."riC! Order, Witb f,bstracts (-Continued)

• Tltl,,:

i~~!~::~!:: ~~~w~~:l:::~~::II~:!i~&~illlenaioninl

and Pase 30

•

~~;t;~~t; lri~s~;~~~~n t~e reqUi~~~~~\~n f~~XO~2menSiOning ~~;e ~o~~;!~~l~:

• engineerine: drawings and documentation u~tne: tile decimal

• SEE

STATUSP~E;O~¥a~~~n c~~Ri~~ 19T~VITY

Title: Maou:racturing Plant Docu.entation (MPD)

DEC STD 115 Revi:lion B Date: 25-Jun-81

Abstract: Describes t!HI document identification and contl"ol I"equiraments necessal"Y to index and I"etl"ieve manufacturing plant doC!ul!lentatlon. It also pl"ovldes guidelines and recolIIMended pl"actices for genel"ating manufactul"lng plant documetltation.

Title: Worlalanship Standards Manual

DEC STD 116 Revision D Date: 12-May-81

Abstract: This document pl"ovides the ':ritel"la for craftmanshlp to be used Inmanufactul"lngandmalntainingDlgital products.

Title: Yield Maintenance Prlnt Setll

DEC S!D 117 Revisic" E Date: 21-Mar-81

Abstract: Establishes cl"iteria for the content of Field Maintenance Prlnt Sets. Spe.,ifies the types of the enlineel"ing drawings to be included c.!!d huw they are to be organized for a

particular hardware product. .

Standard :ror Indexes, Appendixes, Running Heads and Section Numbel'"in. fol'" Software DoClllllentation ManualS

DEC STD 118 Reviston B Date: 12-Jan-78

Abstract: Defines ina~x requirelllents and describes lIIaterial suitable for appendixes. The use of runninl heads for chapter-orlentet1 manualS is specified. The acceptable levels and nUlllbering schemes of headlngs for both chapter_oriented and non chapter-oriented software manuals are explained.

Title: Dlsital Product Safety - Introduction and Genel'"al Bequlrnents

DEC STD 119, Section 0 Revision D Date: 12-Nov-81 Abstract: Deflnes the intentions annd criteria to used d,ll"ing

design and d"veloplllent of new products. SEE STATUS REPORT FOR CURRENT ACTIVITY

Title: Digital Product Safet, _ Desisn Criteria DEC STD 119, Section 1 Revision D Abstract: Pl'"esents product safety design cl"1teria. SEE STATUS REPOR·' FOR CURRENT ACTIVITY

tL • 7665 IIDEI Section 0

08-Feu-82

Table 1. Digital Standard~, Listed In NUAleric Order, iUth Abstracts (Continued)

Title: DigItal Produ.:ot Safety - Test Pro.:oedures

Page 31

DEC STD '19, S'!.:otJ.on 2 Revisioi'lD Dcote: 12-Nov-81 : Present:s test procedures required to deterOline if product'"

IT'!et design .:oriteria. SEE STATUS REPORT FOR CURREN! ACTIVny

Title: Dilital Produ.:ot Satety -AS Cl00 Require.ents

DEC STD 119, Sectio/\ 3 Revision D Date: 12_Nov_81 Abstract: Pre:sents special Au:stralian Standards that apply to product'"

to be sold in Au:stralia.

Title: Dilital Product Satety - Repor1;ing Product Safety Incidents In Di,ltal Plants

DE';: STD 119, Section 5 ReviSion A(XOO) Date: 08-Apr-82 Abstract: This .!Itandard deft"'es product .!Iafety incideC'lts, de:sortbe.!l procedures to report .!Iuoh Inoident~, 'lnd provide.!l a form wtth instructions for reporttng product .!Iafety incidents. SEE ST.l.TLJS REPORT FOR CLJRRENT ACTIVITY

Title: Cooltng Standard

DEC STD 120 Revision A D ... te: 06_Mar_75

Abstract: A Quick reference to whioh a Design £ngineer oar refer for Que:stion:: on coolir., conventional cirouit boa",d",. There are abo inoluded .!IOI!Ie gener"l guidelines for oabinets and comp"nent level thert!lal oalculation", to enable the Engineer to estimate the coolin, required for thi", sy~tem. Title: Digital Data Co_uni~ations Meiuag~ Protocol (DDCMP) DEC STD 121, Section 0 Revts!.on A Dat.e: 30-Mar-78 Abstract: Describes the functions, characteri"'tics, interface:s, me.!ls .. ge format"" and ?peration of the DDCMP protocol. It is prilllarily intended ,0 a.!l",ist the individual implementing DDCMP. It i", :structured to al~o provide general information desoribing the protoool ~o others ",ho may need thi~ levO!l of information. It is not intended to lnstruct tho~e unfamiliar loIith the ba~ic prinoiples of data cOOlmunioations. SEE STATLJS REPORT FOR CLJRRENT ACTIVITY

Ae; Power Line StandardS: DflSign Requtrelllents and Design GUidelines

DEC &:rD 122 Revlsion D Date: 17-Deo-81

[image:34.207.17.185.33.210.2]

EL & 7665 IMDEX

SectioD a 15-Jul-82

Table 1. Digital Standard3, Listed In Numeric Order, Vith Ab3tracts (':ontinued)

Title: forllat Standard tor Manuals Produced on Typeset Media Page 3Z

DEC STD 1211 Revision A Oat~: 05_act_7S

Abstract: For personnel Iolho are involved in preparing hard..-are related product literature tor typeset med13. It doe:! not apply to software doculllentation. It .. u.!!t be used for any typeset manuals to be publi.!lh~d on microfiche. Thi3 standard governs ttlrmatting procedures only.

Title: Ca:!'sette For.at Standard tor Labeled and Unlabeled File.!!

DEC STO 125 Revi.!lion

a

Date: 18-J.m-81

Ab.!!tract: Desc,-ibes the format and l .. beling ctlnventions for filel, physical block.!!, logical record.!! and data ..-ritten on Digital Equip",.-nt cassettes. It also de$ori~es the unlabeled ",tanda .. d. This .!!tandard mU3t be followed when readlng and " .. iting OOls.!!ettes intended for interchange bet..-een ~'J~tem.!!; it 1s .. eoommerlded for other Cas3ette.!!. Title: Packagec ::Oystems Ooc:u.entation Structure

DEC STD 125 Revtsiorl A Date: 12-Apr-79

De.!!cribes the minimUIll engineering drawing.!! and documents that are -equlred to document packaged 3y,t<!ms.

Test Metn'~ds For Se.icondl.lctor Devioes, The .... al Resi.!!tance Method 1

DEC STD 127 ReviSion A(XOO) Date: 2B_Dec_ill

Ab.!ltract: Defines the .nethod to be used to measure the tner .. al pe .. formance of .. tcroelectronie pacl.{age configu .. ations when op'!!"ated ur.der fo .. ced convection cooling condition,. SEE STA1U:: REPORT fOR CURRENT ACrrVITY

Confidential Enginee.ring Information and Documentation: PoliC!J and Require",ents

DEC STD 128 Revi.!!ion A Date: 04-Sep-SO

[image:35.207.15.186.30.228.2]

EL & 1665 IKDEX

Seotion 0 15-Jul-82

Table 1. Digital Sta;;Jard3, Listed In Numeric Order, With .U,stracts (Continued)

Title: Software BOl[ Require.tnts and Procedures

!'age 33

DEC STD 129 Revision A D<lte: Q8_Jan_81

Abst"act: Establ:;'shes the I"equi ... ements for content, i<::entification, creation, and quality control of soft"olare ::'o~:s. Title: Product/Syste" Business Plans: Content Requi ... emenU. and

For.at Guideline:.

.30 ReviSion B Date: 03_Dec_81

Business plans shall be w ... itten f",r all new products, a~cept "'hen deemed unnecessary by the Product Engineering Group (PEG). This standard describes content requirementll for a businesll plan. It applies to all new products being conSidered for development. It outlines reqllirement~. for the Execlltive Summary, System Description, !"orecast, Assumptions, and FinanCial AnalysiS. A sample business plan with a recommended entries is provided.

Title: Integrated Cirouit Ooc~entation and Test System Control

DEC STO 133 Revision A Date: 10-Ju'l-75

Abstract: 3ect<.on 1 Includell p'lrpose, lIoope, and detailed descriptionll of documentation and '~ver<lll system. Sectio'l 2 Inc Iud e s procedur"'s for new :ClI and revilling documentation, and test-software ann test-hardware associated with eXillting ICs. Section 3 !ncll'dell responllibilities for general op~ratlon, i'ltrodu-,1.io'l of 'lew IClI, ECO's to e~isting ICs, and introduction of 'lew Ie testers. Also lncludes an index of .. elevant enl3ineering notes.

Title: Mastel" Partll File Definitions

DEC STO 137 ReVision A Date: 08-Aug-75

Abstr~ct: Applies to persons involved internal DEC business programming ap;llication. .Lt describes the field formats 1nitU.lly developed and includes an index of rele~a'lt engineerinl3 notell.

SEE STo\TUS REPORT FOR CURRENT ACTIVIT'!

Title: Reliabllit1 Prediction

DEC STO 139 Revillion A uate: 22-J~'l-76

Abstr~ct: Establishes MIL fiBK 217B as the offici .. l Reliability Prediction technique to be used by DEC and elItablishell the responsibility for maintai'ling key parameters to assure consistent interpre~~tions throughout the corporation.

SEE STATUS REPORT FOR CURRENT ACTIVITY •

LgI;~D 1Jj~~d~~~t~~~u~entatl0~ee~~~~~u£e:

Basio

ReqUlr~:~~~"

211-Jun-82 •

~~~c~~~~~o~h~h~o~~~:~~:

t

;~n m~~~~~;~r~ 4:~~~;;e~1I;~m~~~~:~d:~~

•

EL & 7665 iNDEX

Section 0 15-Jul-S2

Table 1_ Digital Standards, Listed In tlumeric Order, With Abstracts (Continued)

Title: MOdule Docu.entation Structure - Wire Ink !levisions Page 3J1

DEC STD 140, Section 2 Revision A Date: 24-"!ay-79

~bstract: Speclfi.es the addi~i(}nal dccument3tl::>n required to deSCribe modules revised by means ;,f loIi,.e ink,

SEE STATUS REPORT ;:-OR CURREN, ACT:'/ny

Title: Engineering N()tebook Policy and Requirements

':lEe STD PIl ReVision B Date: 27_Aug_81

Defines Digital policy and requirements for issuance, use, control, and retention of Englneering Notebooks f::>r the purposes of capturing and retaining e5senti~1 information, Title: Etch Board and Module Release Verification Require.ents and

Procedures - Manufacturing Production Release

DEC STD 142, Section

°

Revisicn E Date: 25 .Feb-8! Ab5tr'act: De5~ribes the et~h boarj (50 level), mOdule (54_level), and parallel (5~/5lj-level) release processe~, Li~ts documentation itelTls in variou~ release package :-equlred to lTIeet

to-"

acceptance requ!~elTlents for manufacturing PC boards and 1II0dule.,.

Etell Board And Module Reler.se Requ:.re.ents and Proeec'ur'es _ Engineering Superv1s<'!d BuUd (ES8l Proc<'!ss

DEC STD 142, Section 2 Revision'" Date: 26_Feb_81 Abstract: De;lcr1be3 the ~Sign_Ol-fH process for engineering-supervised bui ',d PC boards (fo,'mer'.y calle,j 1:);; volume process). Defi"es int eraction eet;;een Engine .. ,~ng and ~"nufactur ing t hat ~1PP li. .. ~ t? alL ~ig:' tal des 1 gn e rlg.i. nee r i n E; sites. Title: Standard for Upc!ating Hardwar"!/Sortware Manuals

DEC STD 143 Revi3ion A Date: 19_Aug_76

[image:37.207.8.186.27.214.2]