Product code: 101
Print date: 28.08.2013 Page 1 of 5
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Cleaner - Fett CF 1111
Product identifier
Chemical characterization ( Mixture )
Details of the supplier of the safety data sheet
Intercon Enterprises Inc. Company name: 11-7550 River Road Street: CDN Delta BC V4G 1C8 Place: Telephone: 604 946-6066 Telefax: 604 946-5340 e-mail: [email protected] www.intercononline.com Internet: Manufacturer: Jokisch GmbH, Germany Industriestraße 5, D-33813 Oerlinghausen Phone: +49.5202.9734-0 Fax: +49.5202.9734-49 Responsible Department: Giftnotruf Berlin: +49 (0) 30 / 30 686 790 Emergency telephone:
SECTION 2: Hazards identification
Route(s) of Entry
Signs and Symptoms of Exposure
Carcinogenicity (NTP): Carcinogenicity (IARC): Carcinogenicity (OSHA):
SECTION 3: Composition/information on ingredients
Mixtures
SECTION 4: First aid measures
Description of first aid measures
Provide fresh air. Move victim to fresh air. Put victim at rest and keep warm.
After inhalation
After contact with skin, wash immediately with: Water. Change contaminated clothing.
After contact with skin
Rinse immediately carefully and thoroughly with eye-bath or water.
After contact with eyes
If swallowed, immediately drink: Water. Move victim to fresh air. Put victim at rest and keep warm.
After ingestion
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
Extinguishing materials should be selected according to the surrounding area. The product itself is not combustible.
Suitable extinguishing media
In case of fire: Wear self-contained breathing apparatus.
Advice for firefighters
Contaminated fire-fighting water must be collected separately. Do not empty into drains or the aquatic environment. Extinguishing materials should be selected according to the surrounding area.
Additional information
SECTION 6: Accidental release measures
See protective measures under point 7 and 8.
Personal precautions, protective equipment and emergency procedures
Do not empty into drains or the aquatic environment. Do not empty into drains or the aquatic environment. Prevent spreading over great surfaces (e.g. by damming or installing oil booms).
Environmental precautions
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the assimilated material according to the section on waste disposal. Suitable absorbing material: sand, Universal binding agent. Treat the assimilated material according to the section on waste disposal. Clean contaminated objects and areas thoroughly observing environmental regulations.
Methods and material for containment and cleaning up
SECTION 7: Handling and storage
Precautions for safe handling
Use only in well-ventilated areas. When using do not eat, drink or smoke.
Advice on safe handling
Prevent access by unauthorised personnel.
Advice on protection against fire and explosion
High slip hazard because of leaking or spilled product.
Further information on handling
Conditions for safe storage, including any incompatibilities
Keep container tightly closed. Keep the packing dry and well sealed to prevent contamination and absorbtion of dampness.
Recommended storage temperature: 5-40 °C Maximum period of storage (time): 1 Jahr
Requirements for storage rooms and vessels
Keep away from food, drink and animal feedingstuffs. Do not store with strong oxidizing agents.
Advice on storage compatibility
te regulations relating to storage premises apply to workshops where the product is hanled.
Further information on storage conditions
SECTION 8: Exposure controls/personal protection
Control parameters Exposure controls
Change contaminated clothing. Wash hands before breaks and at the end of work. When using do not eat or drink. Use personal protection equipment as per Directive 89/686/EEC.
Product code: 101
Print date: 28.08.2013 Page 3 of 5
Use glasses or face shield if there is a risk of splashing.
Eye/face protection
Protect skin by using skin protective cream.
Wear protective gloves if advisable under safety aspects. Wash hands before breaks and at the end of work.
Gloves of appropriate material (i.e. nitrilic rubber, specification: penetration time: level 6, >480 min., thickness 0,9-1 mm; CE-certified acc. EN 374 cat III)
Hand protection
Chemical resistant safety shoes.
Take off immediately all contaminated clothing. Thorough skin-cleansing after handling the product. Set out skin protection guidelines.
Skin protection
If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn.
Respiratory protection
pink Paste Physical state:
Color:
Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
characteristic Odor:
Test method
pH-Value (at 20 °C): irrelevant DIN 51369
Changes in the physical state
295 °C Flash point:
Density (at 20 °C): not determined EN ISO 12185
Viscosity / kinematic: (at 20 °C)
ASTM D 7042 214 mm²/s
SECTION 10: Stability and reactivity
Stability:
Possibility of Hazardous Reactions:
The following must be prevented: Oxidizing agents, strong. acid.
Incompatible materials
Hazardous decomposition products: none/none
Hazardous decomposition products
SECTION 11: Toxicological information
Information on toxicological effects
after ingestion: LD50: > 2000mg/kg Rat. After skin contact: LD50: > 2000mg/kg Rat. following inhalation: LC50: > 5mg/1/4hRat.
Acute toxicity
No risks worthy of mention. Practical experience.
The statement is derived form the properties of the components.
The classification was undertaken in accordance with the calculation method governed by the
Preparations Directive (1999/45/EC).
SECTION 12: Ecological information
According to the present state of knowledge negative ecological effects are not expected.
Toxicity
Product is biodegradable.
Persistence and degradability
Product is biodegradable.
Bioaccumulative potential
in delivery condition: Paste
Mobility in soil
According to the present state of knowledge negative ecological effects are not expected. The classification was undertaken in accordance with the calculation method governed by the Preparations Directive (1999/45/EC).
Further information
SECTION 13: Disposal considerations
Waste treatment methods Advice on disposal
Do not empty into drains or the aquatic environment. Waste disposal according to official state regulations. Completely emptied packings can be re-cycled. Waste disposal according to official state regulations.
Water (with cleaning agent). Completely emptied packings can be re-cycled.
Contaminated packaging
SECTION 14: Transport information
Marine transport (IMDG)
Not restricted
Other applicable information Air transport (ICAO)
Not restricted
Other applicable information
SECTION 15: Regulatory information
U.S. Regulations
SECTION 16: Other information
Hazardous Materials Information Label (HMIS)
Health: 0
Flammability: 0
Physical Hazard: 0
NFPA Hazard Ratings
0 Health: 0 Flammability: 0 Reactivity: Unique Hazard:
0
0
0
Product code: 101
Print date: 28.08.2013 Page 5 of 5
(The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor's safety data sheet.)
