SLS-2. Structured Light 3D Scanning System Part No: Order No: DAVID-SLS-2. Structured Light Scanning

(1)

(2)

Technical Specification Scan size: 60 – 500 mm

Resolution/Precision: Up to 0.1% of scan size (down to 0.06 mm) Scanning time: A single scan within a few seconds

Mesh density: Up to 1,2000,000 vertices per scan Export formats: OBJ, STL, PLY

Contents of Package

Industrial camera with high quality lens

Video projector with special lens for large focal range, including remote control USB drive with DAVID Pro Edition 3 software

Sliding rail (aluminium) Camera slider

High quality tripod

Calibration panels printed on both sides for multiple scan volumes Printed instructions

All necessary connecting cables Adapters for power supply Cable straps

System Requirements

Standard-PC (32/64 bit - Windows XP, Vista, 7, 8)

3D graphics adapter

Available VGA or HDMI port Two available USB ports

Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor

Package size

630x340x230 mm Weight 9kg

SLS-2

Structured Light 3D Scanning System

Part No: 79012126

Order No: DAVID-SLS-2

Structured Light Scanning

Structured Light Scanning uses a video projector instead of a laser. Advantages:

No calibraon plate is required during scanning. No manual laser movement.

Much faster scanning. Turntable support available for fully-automated 360°

scanning.

We recommend our SLS-2 hardware package. If you want to build your own

scanner, please contact us for hardware recommendaons.

(3)

-STARTER-KIT-2

Laserscanner

Technical Specification Scan size: 10 – 300 mm

Resolution/Precision: Down to 0.2 mm Scanning time: 10 – 60 sec

Mesh density: Up to 1,000,000 vertices per scan Export formats: OBJ, STL, PLY

Contents of Package

DAVID-Laserscanner Pro Edition software on a USB Flash Drive High-resolution 2-megapixel webcam (full HD) with autofocus Stand for webcam

Red line laser module (650nm, Class 1 laser) with adjustable focus, including battery

Calibration panels (for object sizes up to 40 cm) Base plate for mounting the calibration panels Three right angles for fixing the calibration panels

Standard-PC (32/64 bit - Windows XP, Vista, 7, 8) 3D graphics adapter

Available VGA or HDMI port Two available USB ports

Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor

Package size 440x328x86 mm Weight 2.86kg

Part No: 79011662

Order No: STARTER-KIT-2

Laser Scanning

All you require is a video camera (e.g. webcam), a line laser (we oﬀer suitable,

cost-eﬃcient laser modules), and a 90° calibraon plate as background.

Our Starter-Kit-2 contains selected hardware and oﬀers the best value for money of

any 3D scanning system. If you want to build your own scanner, please contact us for

hardware recommendaons.

(4)

DAVID 3D

SCANNER

3D Scanning Software

DAVID 4 PRO Features Same as DAVID 3 PRO, but

Same as DAVID 3 PRO, but additionally: Turntable support

Scan background filter

Volume/surface area computing Upgrade only from 3 PRO to 4 PRO! DAVID 3 PRO Features

Structured Light Scanning Laser Scanning

Colour texturing

Supports various projector/camera hardware Automated scan alignment

360° scan fusion

Package size • 260x162x93 mm Weight 0.14kg

Standard-PC (32/64 bit - Windows Vista, 7, 8)

3D graphics adapter

Available VGA or HDMI port One available USB port Recommended: Dual-core

processor,

2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor

DAVID 3D

SCANNER

E N T E R P R I S E

DAVID 4 PRO and SOFTWARE

DEVELOPMENT KIT

Part No: 79012393

Order No: DAVID-4-EP-USB

Features

Same as DAVID 4 PRO, but additionally:

Mesh comparison

Point-to-Point measurement SDK Features

Automated scanning

API: Two easy-to-use interfaces available

(C++ and JSON/TCP)

Server process must run on Windows Client software can be written in any

programming language and runs on any operating system

Including documentation and examples

Package size

260x162x93 mm Weight 0.19kg System Requirements StandardPC (32/64 bit - Windows Vista, 7, 8) 3D graphics adapter

processor,

2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor Part No: 79012454

Order No: DAVID-4-PRO-USB

Part No: 79012461

Order No: DAVID-4-PRO-UPGRADE

Part No: 79010795 Order No: DL-3-PRO-USB

SOFTWARE

DAVID 4 PRO

-

this soware allows inexpensive yet high quality 3D scanning of

objects and surfaces.

(5)

-TT-1

Automatic Turntable

Technical Specification Operating voltage: 12V Operating current: 1000mA Supply voltage: 230V Dimensions: Ø 180x50 mm TT-1 Weight: 1.6kg Object weight: Up to 5kg RoHS: Yes Reach : Yes Material: Aluminium Housing potential: Isolated CE-Conformity: Yes Contents of Package

TT-1 Turntable with 3 level LED status display

USB Cable Power Supply

Adapters for power supply Part No: 79012430 Order No: DAVID-TT-1

Package size 222x290x330 mm Weight 2.8kg

DAVID 3D SCANNER PRO 4 or ENTERPRISE/SDK

Standard-PC (32/64 bit - Windows Vista, 7, 8)

3D graphics adapter

processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor

DSL-1

Tabletop Support

Part No: 79012492

Order No: DAVID-DSL-1

Package size 400x300x200 mm Weight 4kg

Contents of Package Lever

Special scanner mount Table clamp Technical Specification Lift range: 33 cm Tilt: 75° Pivoting: 360° Turn: 360° Material: Aluminium

DAVID TT-1 turntable

Improve your scanning performance. With the portable DAVID TT-1 turntable; it makes 360° scanning with DAVID structured light scanners much easier.

In combinaon with the DAVID 3D Scanner Soware (Version 4) it makes 360° scanning much easier. The objects to be scanned are simply placed on the TT-1 and you can rotate and scan automacally from diﬀerent angles by using the DAVID 3D Scanner Soware.

DSL-1 tabletop support

The new DAVID DSL-1 tabletop support, designed for mounting the SLS-2 structured light scanner solidly onto your desk, while keeping the desktop surface free for use. With the new DSL-1 you can mount the SLS-2 more easily ( for example at

workstations) right on your table. The scanner is freely adjustable in every direction. No more trailing cables, no more tripping hazards - simply more performance.

(6)

CP-SET02

High Quality Calibration Panels

Part No: 79011594

Order No: CP-SET02

Package size

•460x330x60 mm

Weight 2.66kg

Contents of Package

High-precision float glass calibration

panels

4 scales in 30, 60, 120 and 240 mm

2 high-precision 90° brackets

Technical Specification

Dimensions: 420x30x13 mm

Dimensions mounted: 420x430x220

mm

Panel material: Glass with special

surface

Bracket material: Fibreglass

DAVID

CAM-3.1-M

Monochrome Camera

Contents of Package

Camera

Technical Specification

USB CMOS Monochrome Camera with Lens

Resolution: 1.3 Megapixels (1280x960)

DAVID Firmware

FPS: 25

Size: 58x95x50 mm

System Requirements

Standard-PC (32/64 bit - Windows XP, Vista, 7, 8)

3D graphics adapter

Available VGA or HDMI port

One available USB port

Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or

AMD graphics processor

Package size

265x128x178 mm

Weight 0.18kg

Part No: 79012324

Order No: DAVID-CAM-3.1-M

COATING

SPRAY 500

Mattening Spray

Part No: 79010771

Order No:

COATING-SPRAY-500

Package size

215x240x140 mm

Weight 2.75kg

(7)

-SOFTWARE 360° Scanning

In order to obtain an all-around scan of your object, you simply create single scans from different directions; the DAVID 3D Scanner software is able to align and fuse the scans into a textured 360-degree-model. The easiest and quickest method is by using our TT-1 turntable. The surface data can be exported in the following file formats .OBJ, .STL, and .PLY. This

allows you to import them into 3 party software for further processing, e.g. measurement,rd

milling or 3D printing.

Post-processing made easy

The DAVID 4 PRO software is the base of the DAVID software family.

Scans can be retouched, aligned and merged into a watertight 360° model with just a few clicks, after which they can be exported to common CAD formats (such as OBJ, STL and PLY), thereby enabling them to be imported into a wide variety of 3D programmes. The 3D data is stored to scale in mm, which makes it suitable for measurements, comparisons and 3D printing or CNC milling.

ENTERPRISE / SDK Software package

The top-of-the-range software package is the DAVID 4 ENTERPRISE version. Beside the well known DAVID features it offers you several measurement tools to make quality inspections. To automate those features, a main part of this version is DAVID SDK. It allows you to include DAVID into your own hardware/software environment. You can automate the scanning and analysis process, or wrap it into your own graphical user interface. Multiple scanners and client software can be distributed over various computers and operating systems, communicating via Ethernet or Internet.

3D scanning to your own requirements - Automated Scanning - Quality Inspection - Alignment - Fusion - and more!

Applications

Bin picking Quality inspection Batch scanning

Own brand3D scanner, wrapped into your own GUI

HARDWARE

The SLS-2 - latest member of our successful scanner family

This advanced model enhances the well proven structured light technology with significantly better handling. Never before it has been so easy to adjust a 3D scan system for scanning a wide range of objects of different features and sizes.

The scanner is mobile and can easily be positioned in front of the surface to be scanned. A single click in the well proven DAVID software starts the scanning process and a few seconds later the digitised 3D model appears on the screen – even the colours of the object can be optionally captured and reproduced in the resulting scan.

You are able to scan all of the sides of the object in succession and subsequently render an enclosed 360° model.

The 3D model can be exported to standard 3D file formats (such as OBJ, STL and PLY) and processed in other applications.

Easy to handle

The scanner system is delivered partially pre-assembled and can be set up in a few simple steps. When the scanner has been initially calibrated using the supplied calibration panels, all subsequent scans are performed easily with one mouse click each. The projector beams structured light patterns onto the scan object in a matter of seconds, which are detected by the camera and subsequently sent to the DAVID software. The DAVID software generates the 3D data immediately and displays it in the 3D viewer. This allows multiple views of the object to be scanned and saved in succession - all around, top and bottom as well as any shaded areas.

Boundless possibilities

Rapid prototyping, medical diagnostics, component testing and quality management, product presentations, forensics, archaeology and cultural heritage, works of art, face scans, computer animation and games are just a few of the possible areas of application.

Highly Flexible Setup

DAVID-SLS-2 is a complete 3D scanner, capable of digitizing tiny or large objects with an astonishing level of detail – as fine as 60 microns.

The scanner has more flexibility and usability than ever and can be adjusted to the scan object very rapidly. With our innovative slider-system the scanner is now continuously adjustable without needing any tool. In combination with a laptop and a 12V DC-source, you get a very stable and mobile scan solution.

Excellent Value for Money

In the past, now and in the future, DAVID stands for high performance 3D scanners at an unbeatable price-performance ratio. The structured light technology operates without any moving mechanical parts, which makes the scanner inexpensive and robust.