BC. 02.03 D2/E
ISO 9001 Certified
E
delta
due
®
series
Control and acquisition modules
with fieldbus
for DIN rail
mounting
Not just I/O modules
Process and Temperature
controllers
Analogue and digital
I/O modules
Transmitters with alarm
thresholds
PROFIBUS DP / DeviceNet /
CANOpen / Modbus TCP/
Modbus RTU fieldbus
Interfaces
• A complete range of compact and flexible modules • PC configurable
• Wide choice of Operator Panels • Built-in RS 485 Modbus
ASCON’S CONTROL AND ACQUISITION
Modular Multiloop
R
3 YEARS WARRANTYDimensions:
w 22.5 x h 99 x d 115 mm
delta
due
®series
ASCON’s process control experience and the increasing need for integration of the control systems have brought to the development of the new deltadue®series, consisting
in control and acquisition modules.
The deltadue®modules
can either be rear panel or on-machine mounted. This way, control panels can be more compact and distribution on the plant or on the machine can be optimized. The modules are independent. Each module can work as a single unit or within a set of modules as a part of a stand-alone control system, or integrated in PLC or PC systems. Integration into PROFIBUS DP or DeviceNet or CANOpen or Modbus TCP or Modbus RTU is assured by the Gateway modules.
User friendly software assists rapid PC configuration of deltadue®.
A complete range
of modules...
• PID single loop and dual loop controllers with universal input and with time proportioning, valve drive and analogue outputs • Modular Multi loop controllers
up to 31 or more zones • Analogue and digital data
acquisition for: - PC based systems field
interface (front-end) - Expansion of PLCs or other
data processing units.
...compact and flexible...
• Universal input: T/C, RTD(Pt100), mA, mV, Hz, IR sensors and a special Custom linearisation • Auxiliary power supply
for 2-wire transmitters • Relay, SSR and SSR drive. • Special functions, Start-up,
Timer, etc. • Hot-swapping
ON MODULES FOR DIN RAIL MOUNTING
• Universal single loop
controllers
• Independent dual loop
controllers
• 1-channel or 2-channel
universal analogue
input modules
• 6 DI plus 2 DO modules
D1, D2, D3
Controllers
D7, D8, D9
Acquisition and
Transmitter modules
DX Manager-Gateway
RS 485
485/232
...open to the external
world...
All modules have RS485 and Modbus protocol for direct connection to most common Operator Panels and SCADAs. Integration into PROFIBUS DP or DeviceNet or CANOpen or Modbus TCP or Modbus RTU by means of the Gateway modules DX and DY.
...with the
“Manager-Gateway”...
The optional DX module includes two important functions- management of the connected deltadue®
modules for offline configuration, data back up and hot swapping
- serial interface and adaptor for integration on fieldbus.
...with a wide range
of HMIs
The deltadue®series includes
self-configuring HMIs, from simple compact
alphanumeric Operator Panels to Touch Screen Graphic panels. Connected deltadue®
modules are automatically recognized and their configuration uploaded.
SCADA software
for machines
and/or small plants
- Windows environment - Self-configuration for
up to 32 deltadue®and
gammadue®instruments;
simple and flexible - Overview, trend and alarm
pre-formatted pages - Plant synoptics
- Data archiving and report generation.
PV1 OP1 OP2 PV2 IL1 12 12 12 12
Main universal Inputs
Digital input Setpoint OP3 OP4 Digital outputs Digital outputs
can also be used as digital inputs
Available functions
Not
D1 Line - Temperature controller
D2 Line - Dual loop control/acquisition module
PV AUX IL OP1 OP2 OP3 OP4 12 12 Digital input Fuzzy tuningwith automatic selection
One shot Auto tuning One shot Natural frequency
Fuzzy tuning
with automatic selection
One shot Auto tuning One shot Natural frequency
Fuzzy tuning
with automatic selection
One shot Auto tuning One shot Natural frequency
Main universal Input
Setpoint Special functions Digital input functions
RS485 Modbus Slave
for configuration and supervision purposes
Serial communications
RS485 Modbus Slave
for configuration and supervision purposes
Serial communications
PID CONTROL MODULES
Current transformer
D3 Line - Heat/Cool controller with analogue output
PV OP1 OP2 OP3 OP4 OP5 12 12
Main universal Input
RS485 Modbus Slave
for configuration and supervision purposes
Serial communications
2 + 2
2 + 2
Digital input functions
Every output (OP1...OP4) can be freely combined with the Pv1 or PV2 inputs
IL Digital input Outputs Outputs Auxiliary inputs Digital inputs Analogue output Fuzzy tuning Setpoint Special functions Digital input connected functions Digital outputs Thermocouple RTD Pt100 Delta temperature (2xRTD) mA and mV “Custom” Current transformer Isolated contact NPN open collector TTL open collector Frequency SPST relay SSR PNP open collector SSR drive mA One shot Auto tuning One shot Natural frequency Local Memorised Start-up Timer Auto/Man Memorised setpoint activation PV Hold Alarm acknowledgement Not Toggle Flip-Flop
5
ACQUISITION MODULES
D7 Line - Analogue acquisition, alarm thresholds and transmitter module
PV IL OP1 OP2 OP5 12 12 Digital input
Main universal Input Outputs (option)
Digital input functions
RS485 Modbus Slave
for configuration and supervision purposes
Serial communications
DO1
DO2
Digital inputs Output
D8 Line -Digital I/O acquisition module with 6 Inputs and 2 Outputs
RS485 Modbus Slave
for configuration and supervision purposes Serial communications DI1 DI2 DI3 DI4 DI5 DI6 Available functions
Not Toggle Flip-Flop Available functions PWM Hold Not PV1 OP1 OP2 PV2 IL1 12 12 12 12
Main universal Inputs
Digital input
OP3
OP4 Digital outputs
Digital outputs
can also be used as digital inputs
Available functions
Not
D9 Line - 2-channel analogue acquisition module
RS485 Modbus Slave
for configuration and supervision purposes
Serial communications
Digital input functions
Every output (OP1...OP4) can be freely combined with the Pv1 or PV2 inputs
ARCHITECTURES AN
Plastic and Rubber: Injection, Extrusion,
Hot-Runners
Packaging: Thermowelding, Thermoforming
Food: Dairy products, Food Packaging,
Bottling, dried and fresh Pasta, oven Products, cereal Silos, preserving-ripening stores
Vehicles: engine testing Counters,
painting Plants, plate welding Plants
Ceramic and Brick Works: continuous
Furnaces, intermittent Furnaces, Driers
Industries and Applications
Modular multiloop
PID controller with local
Operator Panel interfaced
with remote SCADA.
Distributed I/O modules
for acquisition,
data logging
and centralised
supervision of analogue
and digital signals with
the possibility of alarms
and local commands.
Modular multiloop
PID controller with
local Operator Panel.
Distributed control
and acquisition system with
DX module (manager and bus
interface) for hot swapping
and connection to local
Operator Panel and remote
SCADA.
HMI/SCADA Modbus PLC Modbus Modbus DX DXAND APPLICATIONS
Metal Works: blast Furnaces,
thermal treatment Furnaces
Glass: blast Furnaces; Furnaces for the
treatment of flat, hollow, curved glass
Chemistry and Pharmaceutics:
Fine chemistry, Pharmaceutics, Cosmetics, Paints and Enamels
Power: Boilers, Burners
Industrial Air Conditioning and
Refrigeration: climatic Chambers, Chillers Shipyards: hull Automation
Water Treatment: waste Waters,
Primary Waters, Semi-Conductors.
Integration of PLC
systems with external
distributed PID controls
and I/O modules.
Distributed I/O modules
for PC based sytems.
Control and acquisition
modules with DX fieldbus
interface module.
PLC PLC PROFIBUS / DeviceNet Modbus Modbus DXDistributor: The specifications in this document may therefore be changed without notice -Modbus ®is a trademark of AEG Schneider Automation
DX - Manager-Gateway Line
The DX module has 3 serial ports and includes two important functions: - Manager
- Gateway.
The “Manager” memorises the configuration and parameters of each module and monitors that the latter functions correctly. Any time a module is substituted, this is recognised by the DX-Manager, which
automatically reconfigures and parametrises
the substituted module. The Gateway includes: one fieldbus slave port for the conversion Modbus/PROFIBUS DP, Modbus/DeviceNet and Modbus RTU/Modbus RTU; two RS485 Modbus Master ports for the connection to the deltadue®modules
and to other Ascon’s,
or other manufacturer’s, devices; one RS485/RS232 Modbus Slave port for the connection to Operator Panels, Supervision PCs and for the configuration of the deltadue®modules via PC.
PROFIBUS / DeviceNet / Modbus RTU
DX Manager Gateway
Modbus for configuration and/or supervision
Modbus
Bus for other devices
ASCON spa
Via Falzarego, 9/11 20021 Baranzate (Milano) Italy Tel. +39 02 333 371 Fax +39 02 350 4243 http://www.ascon.it sales@ascon.itASCON FRANCE
2 bis, Rue Paul Henri Spaak ST.THIBAULT DES VIGNES F-77462 LAGNY SUR MARNE - Cedex Tél. +33 (0) 1 64 30 62 62 Fax +33 (0) 1 64 30 84 98 www.ascon.fr ascon.france@ascon.fr AGENCE EST Tél. +33 (3) 89 76 99 89 Fax +33 (3) 89 76 87 03
ASCON
CORPORATION
1884 East Fabyan Parkway Batavia, Illinois 60510 Tel. +1 630 482 2950 Fax +1 630 482 2956 www.asconcorp.com info@asconcorp.com WORLDWIDE NETWORK OF DIRECT SALES CENTRES, DISTRIBUTORS AND VARs
Europe
Belgium, Croatia, Czech Rep., Denmark, Esthonia, Finland, France, Germany, Great Britain, Greece, Holland, Ireland, Norway, Poland, Portugal, Romania, Russia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine
Americas
Argentina, Brazil, Canada, Chile, Colombia, Ecuador, Paraguay, Peru, Urugay, Venezuela
Rest of the world
Algeria, Australia, China, Egypt, Hong Kong, India, Indonesia, Iran, Israel, Malaysia, Marocco, New Zeland, Pakistan, Saudi Arabia, Singapore, Taiwan, Thailand, Tunisia, South Africa & South East Africa, UAE
PLC