Rueda de palabras: AMERICAN PETROLEUM INSTITUTE
API 82-42 1984-03-00 Influence of Loading Rate on Axially Loaded Piles in Clay
API MPMS 1 1994-00-00 Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary
API MPMS 2.2A 1995-00-00 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method First Edition; Supersedes STD 2550 API MPMS 2.2B 1989-03-00 Manual of Petroleum Measurement
Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method First Edition; Supersedes STD 2550; Erratum - 1990 R(1996)
API MPMS 2.7 1991-03-00 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks First Edition R(1996)
API MPMS 2.8A 1991-03-00 Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and
Oceangoing Barges First Edition R(1996) API MPMS 2.8B 1995-00-00 Manual of Petroleum Measurement
Standards Chapter 2 - Tank Calibration Section 8B - Recommended Practice for the Establishment of the Location of the Reference Gauge Point and the Gauge Height of Tanks on Marine Tank Vessels First Edition
API MPMS 3.1A 1994-00-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products First Edition; Replaces STD 2545
API MPMS 3.1B 1992-00-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging First Edition; Replaces STD 2545 R(1997)
API MPMS 3.2 1995-00-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars First Edition; Replaces STD 2545
API MPMS 3.3 1996-00-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 3 - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging First Edition; Replaces STD 2545
API MPMS 3.4 1995-00-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 4 - Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic Tank Gauging First Edition; Replaces STD 2545
API MPMS 3.5 1997-03-00 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging First Edition
API MPMS 4.1 1998-05-00 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1
- Introduction Second Edition R(1993) API MPMS 4.2 1988-10-00 Manual of Petroleum Measurement
Standards Chapter 4 - Proving Systems Section 2 - Conventional Pipe Provers First Edition; API STD 1101, 2531, 2533, 2534 R(1993)
API MPMS 4.3 1988-07-00 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 3 - Small Volume Provers First Edition R(1993) API MPMS 4.4 1998-05-00 Manual of Petroleum Measurement
Standards Chapter 4 - Proving Systems Section 4 - Tank Provers Second Edition R(1993)
API MPMS 4.5 1988-10-00 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers First Edition; Supercedes 1101, 2531, 2533, 2534 R(1993)
API MPMS 4.6 1999-05-00 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation Second Edition R(1993) API MPMS 4.7 1998-12-00 Manual of Petroleum Measurement
Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures Second Edition R(1993)
API MPMS 4.8 1995-00-00 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
API MPMS 5.1 1995-09-00 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters Third Edition
API MPMS 5.2 1987-00-00 Manual of Petroleum Measurement Standards Chapter 5 - Liquid Metering Section 2 - Measurement of Liquid Hydrocarbons by
Displacement Meters Second Edition
API MPMS 5.3 1995-00-00 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3
- Measurement of Liquid Hydrocarbons by Turbine Meters
API MPMS 5.4 1995-09-00 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters Third Edition; Errata - March 1996
API MPMS 5.5 1982-00-00 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems First Edition R(1997)
API MPMS 6.1 1991-05-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 1 - Lease Automatic Custody Transfer (LACT) Systems Second Edition R(1996)
API MPMS 6.2 1994-00-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies
Section 2 - Loading-Rack and Tank-Truck Metering Systems for Non-LPG Products
API MPMS 6.3 1994-00-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 3 - Service Station Metered Fuel - Dispensing Systems
API MPMS 6.4 1984-06-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities First Edition R(1996)
API MPMS 6.5 1991-05-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Página 2
Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers Second Edition R(1996)
API MPMS 6.6 1991-05-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 6 - Pipeline Metering Systems Second Edition
API MPMS 6.7 1991-00-00 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons API MPMS 7.1 1991-02-00 Manual of Petroleum Measurement
Standards Chapter 7 - Temperature Determination Section 1 - Static Temperature Determination Using Mercury-in-Glass Tank Thermometers First Edition; Replaces STD 2543
API MPMS 7.2 1995-03-00 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 2 - Dynamic Temperature Determination Second Edition
API MPMS 7.3 1985-07-00 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers First Edition
API MPMS 7.4 1993-00-00 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers API MPMS 8.1 1995-10-00 Manual of Petroleum Measurement
Standards Chapter 8 - Sampling Section 1 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products Third Edition; ASTM D4057
API MPMS 8.2 1995-10-00 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products Second Edition; ASTM D4177
API MPMS 8.3 1995-00-00 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products First Edition; ASTM D5854
API MPMS 8.4 1995-00-00 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Manual Sampling and Handling of Fuels for Volatility Measurement First Edition; ASTM D5842
API MPMS 9.1 1981-06-00 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Hydrometer Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products ASTM D1298 - 80 R(1992)
API MPMS 9.2 1982-04-00 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 2 - Pressure Hydrometer Test Method for Density or Relative Density First Edition R(1992)
API MPMS 9.3 1994-00-00 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products
API MPMS 10.1 1981-04-00 Manual of Petroleum Measurement Página 3
Standards Chapter 10 - Sediment and Water Section 1 - Determination of Sediment in Crude Oils and Fuel Oils by the Extraction Method ASTM D473 R(1993)
API MPMS 10.2 1981-04-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method ASTM D4006 R(1993) API MPMS 10.3 1981-04-00 Manual of Petroleum Measurement
Standards Chapter 10 - Sediment and Water Section 3 - Determination of Water and Sediment in Crude Oil by the Centrifuge Method
(Laboratory Procedure) ASTM D4007 R(1993) API MPMS 10.4 1988-05-00 Manual of Petroleum Measurement
Standards Chapter 10 - Sediment and Water Section 4 - Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) ASTM D96-88 R(1993)
API MPMS 10.5 1994-00-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Water Determination in Petroleum Products and Bituminous Materials by
Distillation
API MPMS 10.6 1995-00-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Determination of Water and Sediment in Fuel Oils by the Centrifuge Method
(Laboratory Procedure) Second Edition; ASTM D1796
API MPMS 10.7 1991-00-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration
(Volumetric) First Edition; ASTM D 4377; IP 356/87; (R 1996)
API MPMS 10.8 1991-02-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water
Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration First Edition; ASTM D 4807-88 R(1993)
API MPMS 10.9 1993-00-00 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration API MPMS 11.1 VOL I 1980-00-00 Manual of Petroleum Measurement
Standards Chapter 11.1 - Volume Correction Factors Volume I Table 5A - Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6A
- Generalized Crude Oils and JP-4 Correction of Volume to 60 Degrees F Against API Gravity at 60 Degrees F First Edition; ASTM D1250; IP 200; (R 1993)
API MPMS 11.1 VOL II 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B
- Generalized Products Correction of Volume to 60 Degrees F Against API Gravity at 60 Degrees F First Edition; ASTM D1250; IP 200; (R 1993) API MPMS 11.1 VOL III 1980-08-00 Manual of Petroleum Measurement
Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Página 4
Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degrees F First Edition; ASTM D1250; IP 200; Addendum - 1995 R(1993)
API MPMS 11.1 VOL IV 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Volume to 60 Degrees F Against Relative Density 60/60 Degrees F First Edition; ASTM D1250; IP 200; (R 1993)
API MPMS 11.1 VOL V 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized
Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume to 60 Degrees F Against Relative Density 60/60 Degrees F First Edition; Errata - 1981 (ASTM D1250) (IP 200) (R 1993)
API MPMS 11.1 VOL VI 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degrees F First Edition; ASTM D1250; IP 200; (R 1993) API MPMS 11.1 VOL VII 1980-00-00 Manual of Petroleum Measurement
Standards Chapter 11.1 - Volume Correction Factors Volume VII Table 53A - Generalized Crude Oils Correction of Observed Density to Density at 15 Degrees C Table 54A - Generalized Crude Oils Correction of Volume to 15 Degrees C Against Density at 15 Degrees C First Edition; ASTM D1250; IP 200; (R 1993)
API MPMS 11.1 VOL VIII 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VIII Table 53B - Generalized Products Correction of Observed Density to Density at 15 Degrees C Table 54B - Generalized Products Correction of Volume to 15 Degrees C Against Density at 15 Degrees C First Edition; Errata - 1981; ASTM D1250; IP 200; (R 1993) API MPMS 11.1 VOL IX 1980-08-00 Manual of Petroleum Measurement
Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degrees C First Edition; ASTM D1250; IP 200; Addendum - 1995 R(1980)
API MPMS 11.1 VOL X 1980-00-00 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume X - Background, Development, and Program Documentation First Edition; Editorial Amplification; ASTM D1250; IP 200; (R 1993) API MPMS 11.1 VOL XIII 1982-00-00 Manual of Petroleum Measurement
Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volume to 60 Degrees F Against API Gravity at 60 Página 5
Degrees F ASTM D1250; (R 1993)
API MPMS 11.1 VOL XIV 1982-00-00 Manual of Petroleum Measurement Standards Chapter 11.1-Volume Correction Factors, Volume XIV, Table 53D- Generalized Lubricating Oils Correction of Observed Density to Density at 15 Degrees C Table 54D-Generalized Lubricating Oils Correction of Volume to 15 Degrees C Against Density at 15 Degrees C Errata - August 1982; ASTM D1250; (R 1993) API MPMS 11.2.1 1984-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.1 - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity Range
API MPMS 11.2.1M 1984-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.1M - Compressibility Factors for Hydrocarbons: 638-1074 Kilograms per Cubic Metre Range Erratum - February 1985; (R 1996)
API MPMS 11.2.2 1986-10-00 Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature Second Edition; GPA 8286-86 R(1992)
API MPMS 11.2.2 ADDENDUM 1994-12-00 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids First Edition; Errata 1996
API MPMS 11.2.2M 1986-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature GPA 8286M-86; (R 1992)
API MPMS 11.2.3 1984-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.3 - Water Calibration of Volumetric Provers
API MPMS 11.2.3M 1984-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.3M - Water Calibration of Volumetric Provers (R 1996)
API MPMS 12.1.1 1996-08-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright
Cylindrical Tanks and Marine Vessels First Edition; Errata April 24, 1997; Interim Report 4/24/1998
API MPMS 12.2 1981-00-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters
API MPMS 12.2.1 1995-05-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1
- Introduction Second Edition
API MPMS 12.2.2 1995-05-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2
- Measurement Tickets Second Edition
API MPMS 12.2.3 1998-10-00 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum
Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports First Edition; Errata November 6, 1998, Effective Date is May 1, 1999
API MPMS 12.2.4 1997-12-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4
- Calculation of Base Prover Volumes by the Waterdraw Method First Edition
API MPMS 12.3 1996-00-00 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 3 - Volumetric Shrinkage Resulting from Blending Light Hydrocarbons with Crude Oils
API MPMS 13.1 1985-00-00 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 1 - Statistical Concepts and Procedures in Measurement
API MPMS 13.2 1994-00-00 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 2 - Methods of Evaluating Meter Proving Data
API MPMS 14.1 1993-08-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samples for Custody Transfer Fourth Edition
API MPMS 14.3.1 1990-00-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids
Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS 14.3; (R 1995)
API MPMS 14.3.2 1991-00-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Mst. Section 3 - Concentric, Square-Edged Orifice Meters Part 2 - Spec. and Installation
Requirements (AGA Report No. 3, Part 2 and GPA 8185-90, Part 2)
API MPMS 14.3.3 1992-00-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids
Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications API MPMS 14.3.4 1992-00-00 Manual of Petroleum Measurement
Standards Chapter 14 - Natural Gas Fluids
Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 4 - Background,
Development, Implementation Proc. and Subroutine Doc. Third Edition; Replaces API MPMS 14.3 API MPMS 14.4 1991-04-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes First Edition
API MPMS 14.5 1996-00-00 Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis GPA STD 2172-96
API MPMS 14.6 1991-00-00 Manual of Petroleum Measurement Página 7
Standards Chapter 14 - Natural Gas Fluids Measurement Section 6 - Continuous Density Measurement
API MPMS 14.7 1995-00-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 7 - Mass Measurement of Natural Gas Liquids GPA STD 8182-95
API MPMS 14.8 1997-07-00 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement Second Edition
API MPMS 15 1980-12-00 Manual of Petroleum Measurement Standards Chapter 15 - Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries API PUBL 2564 R(1992)
API MPMS 16.2 1994-00-00 Manual of Petroleum Measurement Standards Chapter 16 - Measurement of
Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by
Hydrostatic Tank Gauging
API MPMS 17.1 1994-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection
API MPMS 17.2 1999-05-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement
Section 2 - Measurement of Cargoes on Board Tank Vessels Second Edition
API MPMS 17.2A 1995-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2A - Closed and Restricted Systems API MPMS 17.3 1992-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement
Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements First Edition; Errata - 1992 R(1997)
API MPMS 17.4 1994-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
API MPMS 17.5 1995-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation
API MPMS 17.6 1994-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks
API MPMS 17.7 1995-00-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement
Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)
API MPMS 17.8 1998-08-00 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading
Inspection of Marine Vessel Cargo Tanks First Edition
API MPMS 18.1 1997-04-00 Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer; Section 1 - Measurement Procedures for Crude Oil
Gathered From Small Tanks by Truck Second Edition
API MPMS 19.1 1991-00-00 Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks Second Edition; Supersedes BULL 2518
API MPMS 19.1D 1993-00-00 Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks First Edition; Erratum - 1994; API Bulletin 2518 API MPMS 19.2 1997-04-00 Manual of Petroleum Measurement
Standards Chapter 19 - Evaporative Loss
Measurement; Section 2 - Evaporative Loss from Floating-Roof Tanks First Edition; Formerly, API Publications 2517 and 2519
API MPMS 19.3 PART A 1997-06-00 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss
Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks First Edition API MPMS 19.3 PART B 1997-08-00 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks First Edition
API MPMS 19.3 PART C 1998-07-00 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss
Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks First Edition API MPMS 19.3 PART E 1997-05-00 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement; Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks First Edition API MPMS 19.3 PART F 1997-03-00 Manual of Petroleum Measurement
Standards Chapter 19.3 - Evaporative Loss Measurement; Part F - Evaporative Loss Factor for Storage Tanks Certification Program First Edition
API MPMS 19.3 PART G 1997-03-00 Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement; Part G - Certified Loss Factor Testing Laboratory Registration First Edition API MPMS 19.3 PART H 1998-03-00 Manual of Petroleum Measurement
Standards Chapter 19.3 - Evaporative Loss Measurement; Part H - Tank Seals and Fittings Certification - Administration First Edition API MPMS 19.4 1997-11-00 Manual of Petroleum Measurement
Standards Chapter 19.4 - Recommended Practice for Specification of Evaporative Losses First Edition
API MPMS 20.1 1993-00-00 Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement
API MPMS 21.1 1993-00-00 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1
- Electronic Gas Measurement
API MPMS 21.2 1998-06-00 Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 2
- Electronic Liquid Volume Measurement Using Página 9
Positive Displacement and Turbine Meters First Edition
API MPMS COMP 1984-00-00 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M; Chapter 11.2.3 and 11.2.3M; Computer Tape Information and Documentation Erratum - October 1984 API RP T-1 1995-00-00 Orientation Programs for Personnel
Going Offshore for the First Time Fourth Edition API RP T-4 1995-00-00 Training of Offshore Personnel in
Nonoperating Emergencies Second Edition API RP T-7 1995-00-00 Training of Personnel in Rescue of
Persons in Water Second Edition
API 1996-00-00 Vocational Training - Book 1
- Introduction to Oil and Gas Production Fifth Edition
API 1990-00-00 Vocational Training - Book 2 - Corrosion of Oil- and Gas-Well Equipment Second Edition
API 1995-00-00 Vocational Training - Book 3
- Subsurface Salt Water Injection and Disposal Third Edition
API 1994-00-00 Vocational Training - Book 5 - Wireline Operations and Procedures Third Edition
API 1994-00-00 Vocational Training - Book 6 - Gas Lift Third Edition
API PUBL 1200 1998-01-00 Federally Mandated Training and Information Third Edition
API PUBL 1210 1994-12-00 Trainer Competencies API Central Committee on Training and Development First Edition
API TR 10TR2 1997-07-00 Shrinkage and Expansion in Oilwell Cements First Edition
API TR 10TR3 1999-05-00 Technical Report on Temperatures for API Cement Operating Thickening Time Tests 1993 Report from the API Task Group on Cementing Temperature Schedules First Edition
API 1987-12-00 1986 Interpretations - Technical Publications Answers to Technical Inquiries API 1989-10-00 1988 Interpretations - Technical Publications Answers to Technical Inquiries API 1991-09-00 1989 and 1990 Interpretations
- Technical Publications Answers to Technical Inquiries
API 1992-08-00 1991 Interpretations - Technical Publications Answers to Technical Inquiries API 1993-06-00 1992 Interpretations - Technical Publications Answers to Technical Inquiries API 1994-08-00 1993 Interpretations - Technical Publications Answers to Technical Inquiries API 1996-02-00 1994 and 1995 Interpretations
- Technical Publications Answers to Technical Inquiries
API TR 4686-007 1999-00-00 Myths and Realities of Oil Spill Planning and Response: the Challenges of a Large Spill
API TR 4686-008 1999-00-00 Judging Oil Spill Response Performance: the Challenge of Competing Perspectives
API BULL E1 1990-00-00 Bulletin on the Generic Hazardous Chemical Category List and Inv. for the Oil and Gas Exploration and Production Ind. Superfund Amendments and Reauthorization Act of 1986, Emer. Planning & Comm. Right-to-Know Act, Title Página 10
III Sec. 311 and 312
API 1997-10-00 Cumulative Impact of Environmental Regulations on the U.S. Petroleum Refining, Transportation and Marketing Industries API API S1 1997-06-01 Organization and Procedures for
Standardization of Oilfield Equipment and Materials Nineteenth Edition
API TR IOSC-001 1994-12-00 1995 International Oil Spill Conference Implementing an Effective Response Management System
API 1998-10-01 Companies Licensed to Use the API Monogram and APIQR ISO 9000 Registration Mark Volume 6, Number 4
API SPEC Q1 1999-03-01 Specification for Quality Programs for the Petroleum and Natural Gas Industry Sixth Edition
API SPEC 1B 1995-00-00 Specification for Oil-Field V-Belt API BULL E2 1992-00-00 Bulletin on Management of Naturally
Occurring Radioactive Materials (NORM) in Oil & Gas Production
API TR IOSC-002 1994-12-00 1995 International Oil Spill
Conference Use and Misuse of Science in Natural Resource Damage Assessment
API RP 2A-LRFD 1993-07-01 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design First Edition; Errata - October 1993; Supplement 1 - February 1997
API RP 2A-WSD 1993-07-01 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design Twentieth Edition; Supplement 1-1996
API SPEC 2B 1996-00-00 Specification for the Fabrication of Structural Steel Pipe
API SPEC 2C 1995-00-00 Specification for Offshore Cranes API RP 2D 1999-08-00 Recommended Practice for Operation
and Maintenance of Offshore Cranes Fourth Edition
API SPEC 2F 1997-06-00 Specification for Mooring Chain Sixth Edition
API SPEC 2H 1999-08-00 Specification for Carbon Manganese Steel Plate for Offshore Platform Tubular Joints Eighth Edition; Effective Date: February 1, 2000 API RP 2I 1996-12-00 In-Service Inspection of Mooring
Hardware for Floating Drilling Units Second Edition
API RP 2L 1996-00-00 Recommended Practice for Planning, Designing, and Constructing Heliports for Fixed Offshore Platforms
API RP 2M 1996-00-00 Recommended Practice for
Qualification Testing of Steel Anchor Designs for Floating Structures
API SPEC 2MT1 1994-00-00 Specification for As-Rolled Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures
API RP 2N 1995-00-00 Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions
API RP 2P 1987-00-00 Recommended Practice for the Analysis of Spread Mooring Systems for Floating Drilling Units
API RP 2R 1984-00-00 Recommended Practice for Design, Rating, and Testing of Marine Drilling Riser Couplings
API RP 2RD 1998-06-00 Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) First Edition
API 2S 1995-00-00 Design of Windlass Wildcats for Floating Offshore Structures Second Edition API RP 2SK 1996-12-00 Recommended Practice for Design and
Analysis of Stationkeeping Systems for Floating Structures Second Edition; Replaces RP 2FP1 API RP 2T 1997-08-00 Recommended Practice for Planning,
Designing, and Constructing Tension Leg Platforms Second Edition
API BULL 2U 1987-00-00 Bulletin on Stability Design of Cylindrical Shells
API BULL 2V 1987-00-00 Bulletin on Design of Flat Plate Structures
API SPEC 2W 1999-08-00 Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP) Fourth Edition; Effective Date: February 1, 2000 API RP 2X 1996-00-00 Recommended Practice for Ultrasonic
and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians
API SPEC 2Y 1993-00-00 Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures Third Edition
API RP 2Z 1998-08-00 Recommended Practice for
Preproduction Qualification for Steel Plates for Offshore Structures Third Edition; Errata, November 1998
API BULL E3 1993-00-00 Environmental Guidance Document: Well Abandonment and Inactive Well Practices for U.S. Exploration and Production Operations API 1996-00-00 National Used Oil Collection Study
Addendum - August 1997
API TR IOSC-003 1994-12-00 1995 International Oil Spill Conference Perspectives on Establishing and Maintaining Oil Pollution Response Capabilities API 1989-00-00 Onshore Solid Waste Management in
Exploration and Production Operations API BULL E4 1993-06-01 Environmental Guidance Document:
Release Reporting for the Oil and Gas
Exploration and Production Industry as Required by the CWA, CERCLA, and SARA Title III First Edition
API SPEC 4F 1995-00-00 Specification for Drilling and Well Servicing Structures
API RP 4G 1998-10-00 Recommended Practice for Maintenance and Use of Drilling and Well Servicing
Structures Second Edition
API 1990-00-00 Proceedings of the 1990 API Pipeline Conference
API API E5 1997-02-00 Environmental Guidance Document: Waste Management in Exploration and Production Operations Second Edition
API BULL 5A2 1988-00-00 Bulletin on Thread Compounds for Casing, Tubing, and Line Pipe Sixth Edition; Superseded by RP 5A3
API RP 5A3 1996-00-00 Recommended Practice on Thread Compounds for Casing, Tubing, and Line Pipe First Edition; Supersedes Bull 5A2
API RP 5A5 1997-12-00 Field Inspection of New Casing, Tubing, and Plain End Drill Pipe Sixth Edition API SPEC 5B 1996-08-00 Specification for Threading,
Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units) Fourteenth Edition; Errata 4/9/1998 API RP 5B1 1996-12-00 Gauging and Inspection of Casing,
Tubing, and Line Pipe Threads Fourth Edition API RP 5C1 1999-05-00 Recommended Practice for Care and Use
of Casing and Tubing Eighteenth Edition
API BULL 5C2 1987-00-00 Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe
API BULL 5C3 1994-00-00 Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe and Line Pipe Properties
API RP 5C5 1996-11-00 Recommended Practice for Evaluation Procedures for Casing and Tubing Connection Second Edition
API RP 5C6 1996-12-00 Welding Connections to Pipe First Edition
API RP 5C7 1996-12-00 Coiled Tubing Operations in Oil and Gas Well Services First Edition
API SPEC 5CT 1998-10-00 Specification for Casing and Tubing (U.S. Customary Units) Sixth Edition; Effective Date April 15, 1999; Errata May 1999
API SPEC 5CT (METRIC) 1995-00-00 Specification for Casing and Tubing (Metric Units) Fifth Edition
API SPEC 5D 1992-00-00 Specification for Drill Pipe API SPEC 5L 1995-04-01 Specification for Line Pipe
Forty-First Edition; Errata - December 15, 1997 API RP 5L1 1996-12-00 Recommended Practice for Railroad
Transportation of Line Pipe Fifth Edition API RP 5L2 1987-00-00 Recommended Practice for Internal
Coating of Line Pipe for Non-Corrosive Gas Transmission Service
API RP 5L3 1996-00-00 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe
API RP 5L7 1988-00-00 Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe
API RP 5L8 1996-12-00 Recommended Practice for Field Inspection of New Line Pipe Second Edition API SPEC 5LC 1998-07-00 Specification for CRA Line Pipe Third
Edition
API SPEC 5LD 1998-07-00 Specification for CRA Clad or Lined Steel Pipe Second Edition
API RP 5LW 1996-12-00 Recommended Practice for
Transportation of Line Pipe on Barges and Marine Vessels Second Edition
API STD 5T1 1996-11-00 Standard on Imperfection Terminology Tenth Edition; Formerly Bull 5T1
API MF 5U01 1993-06-01 Model Form of Voluntary Unit Agreement Fourth Edition
API MF 5U02 1993-06-01 Model Form of Voluntary Unit Operating Agreement Fourth Edition API MF 5U03 1993-06-01 Model Form of Statutory Unit
Agreement Second Edition
API MF 5U04 1993-06-01 Model Form of Statutory Unit Operating Agreement Second Edition
API 1990-00-00 Proceedings of the 1990 API Pipeline Cybernetics Symposium
API SPEC 6A 1996-00-00 Specification for Wellhead and Christmas Tree Equipment
API BULL 6AF 1995-00-00 Technical Report on Capabilities of API Flanges under Combinations of Load Second Edition
API TR 6AF1 1998-11-00 Technical Report on Temperature Derating on API Flanges under Combination of Loading Second Edition
API TR 6AF2 1999-04-00 Technical Report on Capabilities of API Integral Flanges under Combination of Loading - Phase II Second Edition
API 6AM 1995-00-00 Technical Report on Material
Toughness Second Edition; Formerly Bulletin 6AM API RP 6AR 1994-04-15 Recommended Practice for Repair and
Remanufacture of Wellhead and Christmas Tree Equipment First Edition
API SPEC 6AV1 1996-02-01 Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service First
Edition; Errata - December 1996
API SPEC 6D 1994-03-31 Specification for Pipeline Valves (Gate, Ball, and Check Valves) Twenty-First Edition; Supplement 2 Effective June 1, 1998 API TR 6F1 1999-04-00 Technical Report on Performance of
API and ANSI End Connections in a Fire Test According to API Specification 6FA Third Edition API TR 6F2 1999-04-00 Technical Report on Fire Resistance
Improvements for API Flanges Third Edition API SPEC 6FA 1999-04-00 Specification for Fire Test for
Valves Third Edition
API SPEC 6FB 1998-11-30 API Specification for Fire Test for End Connections Third Edition
API SPEC 6FC 1999-04-00 Specification for Fire Test for Valves with Automatic Backseats Third Edition API SPEC 6FD 1995-00-00 Specification for Fire Test for Check
Valves
API SPEC 6H 1998-05-01 Specification on End Closures, Connectors and Swivels
API BULL 6J 1992-00-00 Bulletin on Testing of Oilfield Elastomers - A Tutorial
API BULL 6RS 1990-00-00 (Withdrawn)Bulletin on Referenced Standards for Committee 6, Standardization of Valves and Wellhead Equipment
API 1994-00-00 Proceedings of the 1994 API Tanker Conference Image - A Global Maritime Mission API SPEC 7 1997-12-00 Specification for Rotary Drill Stem
Elements Thirty-Ninth Edition
API RP 7A1 1992-00-00 Recommended Practice for Testing of Thread Compound for Rotary Shouldered
Connections
API SPEC 7B-11C 1994-00-00 Specification for Internal-Combustion Reciprocating Engines for Oil-Field Service API RP 7C-11F 1994-00-00 Recommended Practice for
Installation, Maintenance, and Operation of Internal-Combustion Engines
API SPEC 7F 1993-00-00 Specification for Oil-Field Chain and Sprockets
API RP 7G 1998-08-00 Recommended Practice for Drill Stem Design and Operating Limits Sixteenth Edition API SPEC 7K 1996-02-00 Specification for Drilling Equipment
Second Edition; Errata 4/20/1998 API RP 7L 1995-00-00 Procedures for Inspection,
Maintenance, Repair, and Remanufacture of Drilling Equipment
API 1996-00-00 Product/Service Certification in the Exploration & Production Sector of the Worldwide Oil and Gas Industry Needs Assessment Survey Report
API BULL D8 1964-00-00 Tabular Method for Determining the Change of the Overall Angle and Dog-Leg Severity (for Hole Inclinations up to 70 Degrees)
API SPEC 8A 1997-12-00 Specification for Drilling and
Production Hoisting Equipment Thirteenth Edition API RP 8B 1997-12-00 Recommended Practice for Procedures
for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment Sixth Edition
API SPEC 8C 1997-12-00 Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) Third Edition
API 1996-00-00 Summary of U.S. Occupational Injuries, Illnesses, and Fatalities in the Petroleum Industry
API SPEC 9A 1995-00-00 Specification for Wire Rope
API RP 9B 1999-06-00 Recommended Practice on Application, Care, and Use of Wire Rope for Oil Field Service Tenth Edition
API SPEC 10 1990-00-00 Specification for Materials and Testing for Well Cements
API 1991-00-00 Worldwide Cementing Practices First Edition (R 1995)
API BULL D10 1973-00-00 Selecting Rotary Drilling Equipment, Procedure for
API SPEC 10A 1995-00-00 Specification for Cements and Materials for Well Cementing
API RP 10B 1997-12-00 Recommended Practice for Testing Well Cements Twenty-Second Edition
API SPEC 10D 1995-00-00 Specification for Bow-Spring Casing Centralizers
API RP 10E 1994-00-00 (Withdrawn)Recommended Practice for Application of Cement Lining to Steel Tubular Goods, Handling, Installation and Joining Third Edition; ISO 10409
API RP 10F 1995-00-00 Recommended Practice for Performance Testing of Cementing Float Equipment
API TR 10TR1 1996-00-00 Cement Sheath Evaluation
API RP 11AR 1989-00-00 Recommended Practice for Care and Use of Subsurface Pumps
API SPEC 11AX 1996-00-00 Specification for Subsurface Sucker Rod Pumps and Fittings
API SPEC 11B 1998-01-01 Specification for Sucker Rods Twenty-Sixth Edition
API RP 11BR 1989-10-01 Recommended Practice for Care and Handling of Sucker Rods Eighth Edition; Supplement 1 10-1-1990; Supplement 2 7-1-1991 API SPEC 11E 1994-00-00 Specification for Pumping Units API RP 11ER 1990-00-00 Recommended Practice for Guarding of
Pumping Units
API RP 11G 1994-00-00 Recommended Practice for Installation and Lubrication of Pumping Units
API BULL 11K 1988-00-00 Bulletin Data Sheet for the Design of Air Exchange Coolers
API RP 11L 1988-00-00 Recommended Practice for Design Calculations for Sucker Rod Pumping Systems (Conventional Units)
API BULL 11L2 1969-00-00 Catalog of Analog Computer Dynamometer Cards
API BULL 11L3 1970-00-00 Sucker Rod Pumping System Design Book Errata - November 1973, Supplement 1 - 1977 (R 1994)
API BULL 11L4 1970-00-00 Curves for Selecting Beam Pumping Units
API BULL 11L5 1990-00-00 Bulletin on Electric Motor Performance Data Request Form
API SPEC 11L6 1993-06-01 Specification for Electric Motor Prime Mover for Beam Pumping Unit Service First Edition; Supplement 1 1996
API SPEC 11N 1994-00-00 Specification for Lease Automatic Custody Transfer (LACT) Equipment
API SPEC 11P 1989-00-00 Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services
API RP 11PGT 1992-00-00 Recommended Practice for Packaged Combustion Gas Turbines
API RP 11S 1994-00-00 Recommended Practice for the Operation, Maintenance and Troubleshooting of Electric Submersible Pump Installations
API RP 11S1 1997-09-00 Recommended Practice for Electrical Submersible Pump Teardown Report Third Edition API RP 11S2 1997-08-00 Recommended Practice for Electric
Submersible Pump Testing Second Edition; Effective Date: 10/01/1997
API RP 11S3 1999-03-00 Recommended Practice for Electric Submersible Pump Installations Second Edition API RP 11S4 1993-00-00 Recommended Practice for Sizing and
Selection of Electric Submersible Pump
Installations First Edition; Replaces API RP 11U API RP 11S5 1993-00-00 Recommended Practice for Application
of Electric Submersible Cable Systems
API RP 11S6 1995-00-00 Recommended Practice for Testing of Electric Submersible Pump Cable Systems
API RP 11S7 1993-00-00 Recommended Practice on Application and Testing of Electric Submersible Pump Seal Chamber Sections
API RP 11S8 1993-00-00 Recommended Practice on Electric Submersible Pump System Vibrations
API RP 11T 1994-00-00 Recommended Practice for Installation and Operation of Wet Steam Generators
API SPEC 11V1 1995-00-00 Specification for Gas Lift Equipment API RP 11V2 1995-00-00 Recommended Practice for Gas Lift
Valve Performance Testing
API RP 11V5 1999-06-00 Recommended Practice for Operations, Maintenance, and Trouble-Shooting of Gas Lift Installations Second Edition
API RP 11V6 1999-07-00 Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves Second Edition
API RP 11V7 1999-06-00 Recommended Practice for Repair, Testing, and Setting Gas Lift Valves Second Edition
API SPEC 12B 1995-00-00 Specification for Bolted Tanks for Storage of Production Liquids
API SPEC 12D 1994-00-00 Specification for Field Welded Tanks for Storage of Production Liquids
API SPEC 12F 1994-00-00 Specification for Shop Welded Tanks for Storage of Production Liquids
API SPEC 12GDU 1990-00-00 Specification for Glycol-Type Gas Dehydration Units
API SPEC 12J 1989-00-00 Specification for Oil and Gas Separators
API SPEC 12K 1989-00-00 Specification for Indirect Type Oil-Field Heaters
API SPEC 12L 1994-00-00 Specification for Vertical and Horizontal Emulsion Treaters
API RP 12N 1994-00-00 Recommended Practice for the Operation, Maintenance and Testing of Firebox Flame Arrestors
API SPEC 12P 1995-00-00 Specification for Fiberglass Reinforced Plastic Tanks
API RP 12R1 1997-08-00 Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks in Production Service Fifth Edition; Effective Date: 10/01/1997
API SPEC 13A 1993-05-01 Specification for Drilling-Fluid Materials Addendum 1 June 1999, Effective Date: December 1999
API RP 13B-1 1997-09-00 Recommended Practice Standard
Procedure for Field Testing Water-Based Drilling Fluids Second Edition
API RP 13B-2 1998-02-00 Recommended Practice Standard Procedure for Field Testing Oil-Based Drilling Fluids Third Edition
API RP 13C 1996-00-00 Recommended Practice for Drilling Fluid Processing Systems Evaluation
API RP 13D 1995-00-00 Recommended Practice on the Rheology and Hydraulics of Oil-Well Drilling Fluids API RP 13E 1993-00-00 Recommended Practice for Shale Shaker
Screen Cloth Designation
API RP 13G 1991-00-00 Recommended Practice Standard Procedure for Drilling Mud Report Form API RP 13I 1995-00-00 Recommended Practice Standard
Procedure for Laboratory Testing Drilling Fluids Supplement 1 - July 1996; Supplement 2 - June 1997
API RP 13J 1996-00-00 Testing of Heavy Brines
API RP 13K 1996-02-00 Recommended Practice for Chemical Analysis of Barite Second Edition; Errata 4/25/1998
API BULL D14 1984-00-00 Statistical Analysis of Crude Oil Recovery and Recovery Efficiency
API SPEC 14A 1994-07-01 Specification for Subsurface Safety Valve Equipment Ninth Edition; Errata - 1996 API RP 14B 1994-00-00 Design, Installation, Repair and
Operation of Subsurface Safety Valve Systems Fourth Edition; ISO 10417; Errata - 1996 API RP 14C 1998-03-00 Recommended Practice for Analysis,
Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms Sixth Edition
API SPEC 14D 1994-00-00 Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service
API RP 14E 1991-00-00 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
API RP 14F 1999-06-00 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations Fourth Edition API RP 14G 1993-00-00 Recommended Practice for Fire
Prevention and Control on Open Type Offshore Production Platforms
API RP 14H 1994-07-01 Recommended Practice for
Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Página 17
Offshore Fourth Edition; ISO 10419; Errata - 1996
API RP 14J 1993-00-00 Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities
API SPEC 15HR 1995-04-01 Specification for High Pressure Fiberglass Line Pipe Second Edition; Supplement 1 August 19,1998
API SPEC 15LE 1995-00-00 Specification for Polyethylene Line Pipe (PE)
API SPEC 15LR 1990-00-00 Specification for Low Pressure Fiberglass Line Pipe
API SPEC 15LT 1993-00-00 Specification for PVC Lined Steel Tubular Goods
API RP 15TL4 1999-03-00 Recommended Practice for Care and Use of Fiberglass Tubulars Second Edition
API DR 16 1992-00-00 Analysis of Foods for Benzene API BULL D16 1989-00-00 Suggested Procedure for Development
of Spill Prevention Control and Countermeasure Plans (To Assist Conformance to Requirements of Title 40, Code of Federal Regulations, Part 112.)
API SPEC 16A 1997-12-00 Specification for Drill Through Equipment Second Edition
API SPEC 16C 1993-00-00 Specification for Choke and Kill Systems
API SPEC 16D 1993-00-00 Specification for Control Systems for Drilling Well Control Equipment
API RP 16E 1990-00-00 Recommended Practice for Design of Control Systems for Drilling Well Control Equipment
API BULL 16J 1992-00-00 Bulletin on Comparison of Marine Drilling Riser Analyses First Edition; Formerly Bull 2J
API RP 16Q 1993-00-00 Recommended Practice for Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems First Edition; Formerly RP 2Q and RP 2K
API SPEC 16R 1997-01-00 Specification for Marine Drilling Riser Couplings First Edition
API RP 17A 1996-00-00 Recommended Practice for Design and Operation of Subsea Production Systems
API RP 17B 1998-07-01 Recommended Practice for Flexible Pipe Second Edition
API RP 17C 1991-07-01 Recommended Practice on TFL (Through Flowline) Systems First Edition
API SPEC 17D 1992-10-30 Specification for Subsea Wellhead and Christmas Tree Equipment First Edition;
Supplement 1 - 1993; Supplement 2 - 1996 API SPEC 17E 1998-09-01 Specification for Subsea Production
Control Umbilicals Second Edition; Errata 8/24/98
API RP 17G 1995-01-01 Recommended Practice for Design and Operation of Completion/Workover Riser Systems First Edition
API RP 17I 1996-08-00 Installation Guidelines for Subsea Umbilicals First Edition
API SPEC 17J 1996-12-00 Specification for Unbonded Flexible Pipe First Edition
API DR 21 1992-00-00 API Mineral Oil Review API RP 31A 1997-08-00 Standard Form for Hardcopy
Presentation of Downhole Well Log Data First Edition
API RP 39 1998-05-00 Recommended Practices on Measuring the Viscous Properties of a Cross-Linked Water-Based Fracturing Fluid Third Edition
API RP 40 1998-02-00 Recommended Practices for Core Analysis Second Edition
API RP 41 1995-02-01 Recommended Practice for Presenting Performance Data on Cementing and Hydraulic Fracturing Equipment Second Edition
API RP 43 1991-01-00 Recommended Practices for Evaluation of Well Perforators Fifth Edition
API RP 45 1998-08-00 Recommended Practice for Analysis of Oilfield Waters Third Edition
API RP 50 1995-12-00 Natural Gas Processing Plant Practices for Protection of the Environment Second Edition
API RP 51 1995-09-00 Onshore Oil and Gas Production Practices for Protection of the Environment Second Edition
API RP 52 1995-07-01 Land Drilling Practices for Protection of the Environment Second Edition API PUBL DR53 1996-11-00 Characterization of Exploration and
Production Associated Waste
API RP 53 1997-03-00 Blowout Prevention Equipment Systems for Drilling Wells Third Edition
API RP 54 1992-05-01 Recommended Practices for Occupational Safety for Oil and Gas Well
Drilling and Servicing Operations Second Edition API RP 55 1995-02-15 Recommended Practices for Oil and Gas
Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide Second Edition API RP 56 1995-12-00 Recommended Practices for Testing
Sand Used in Hydraulic Fracturing Operations Second Edition
API RP 58 1995-12-00 Recommended Practices for Testing Sand Used in Gravel Packing Operations Second Edition
API RP 60 1995-12-00 Recommended Practices for Testing High-Strength Proppants Used in Hydraulic Fracturing Operations Second Edition
API RP 63 1990-06-01 Recommended Practices for Evaluation of Polymers Used in Enhanced Oil Recovery Operations First Edition
API RP 64 1991-07-01 Recommended Practices for Diverter Systems Equipment and Operations First Edition API RP 66 1996-06-00 Recommended Practices for Exploration
and Production Data Digital Interchange Second Edition
API RP 67 1994-03-01 Recommended Practices for Oilfield Explosives Safety First Edition
API RP 68 1998-01-00 Recommended Practice for Oil and Gas Well Servicing and Workover Operations Involving Hydrogen Sulfide First Edition
API API RP 75 1998-07-31 Implementation Status Assessment 1997 Summary Report to the American Petroleum
Institute Final Report
API RP 75 1998-07-00 Recommended Practices for Development of a Safety and Environmental Management Program for Outer Continental Shelf (OCS) Operations and Facilities Second Edition
API DR 148 1997-12-00 Identification of Organic Toxicants in Treated Refinery Effluents
API DR 218 1997-04-00 Pilot Study in Los Angeles to Measure Personal Ozone Exposures During Scripted
Activities Appendices
API DR 220 1995-00-00 Potential BTEX Emissions from the Nation's Triethylene Glycol Units in Oil and Natural Gas Facilities
API DR 224 1988-11-15 Review of EPA's Proposed Flare Plume Rise Procedure
API PUBL DR 225 1998-10-00 Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at
Sarnia, Ontario
API PUBL 300 1991-00-00 Generation and Management of Wastes and Secondary Materials in the Petroleum Refining Industry: 1987-1988
API PUBL 301 1989-00-00 Aboveground Storage Tank Survey API PUBL 302 1991-00-00 Waste Minimization in the Petroleum
Industry Source Reduction Recycle Treatment Disposal a Compendium of Practices
API PUBL 303 1992-00-00 Generation and Management of Wastes and Secondary Materials
API PUBL 304 1991-00-00 Evaluation of Restoration
Alternatives for Natural Resources Injured by Oil Spills
API PUBL 305 1991-00-00 Protecting Agricultural Crops from Ozone Exposures Key Issues and Future Research Directions
API PUBL 306 1991-00-00 An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 307 1992-00-00 Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 309 1992-00-00 Current Status and Research Needs Related to Biogenic Hydrocarbons
API PUBL 310 1997-11-00 Analysis of Refinery Screening Data API PUBL 311 1993-00-00 Environmental Design Considerations for Petroleum Refining Crude Processing Units API PUBL 312 1990-00-00 Responding to Environmental Challenge
A Discussion Among People from Industry, Government and Environmental Groups
API PUBL 313 1993-00-00 (Withdrawn)Petroleum Emission Factor Information Retrieval System (PEFIRS)
API PUBL 315 1993-00-00 Assessment of Tankfield Dike Lining Materials and Methods
API PUBL 316 1995-00-00 Identifying and Measuring Nonuse Values for Natural and Environmental Resources a Critical Review of the State of the Art
API PUBL 317 1993-00-00 Industry Experience with Pollution Prevention Programs
API PUBL 318 1983-00-00 (Withdrawn)Land Treatment Practices in the Petroleum Industry
API PUBL 322 1994-00-00 Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 323 1994-00-00 Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 324 1993-00-00 Generation and Management of Residual Materials Petroleum Refining Performance 1990 Survey
API PUBL 325 1994-00-00 Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks API PUBL 326 1994-00-00 Cost Effectiveness of VOC and NOx
Emission Control Measures
API PUBL 327 1994-00-00 Aboveground Storage Tank Standards: A Página 20
Tutorial
API PUBL 328 1995-00-00 Laboratory Evaluation of Candidate Liners for Secondary Containment of Petroleum Products
API PUBL 329 1994-00-00 Generation and Management of Residual Materials Petroleum Refining Performance 1991 Survey
API PUBL 331 1994-00-00 Environmental Performance
Indicators: Methods for Measuring Pollution Prevention
API PUBL 332 1995-00-00 Comparison of Screening Values from Selected Hydrocarbon Screening Instruments API PUBL 333 1995-00-00 Generation and Management of Residual
Materials
API PUBL 334 1996-00-00 Guide to Leak Detection for Aboveground Storage Tanks
API PUBL 335 1996-07-00 (Withdrawn)Refinery MACT Workshop July 11-12, 1996
API PUBL 336 1996-00-00 Management of Residual Materials: 1994 Petroleum Refining Performance
API PUBL 337 1996-08-00 Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service
API PUBL 338 1997-02-00 (Withdrawn)Summary of Question and Answer Sessions for the American Petroleum Institute's Gasoline Distribution MACT Workshop API PUBL 339 1997-06-00 Management of Residual Materials:
1995 Petroleum Refining Performance API PUBL 340 1997-10-00 Liquid Release Prevention and
Detection Measures for Aboveground Storage Facilities
API PUBL 341 1998-02-00 Survey of Diked-Area Liner Use at Aboveground Storage Tank Facilities
API PUBL 342 1998-05-00 Fugitive Emissions from Equipment Leaks 1: Monitoring Manual
API PUBL 343 1998-05-00 Fugitive Emissions from Equipment Leaks II: Calculation Procedures for Petroleum Industry Facilities
API PUBL 344 1998-06-00 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
API PUBL 345 1998-06-00 Management of Residual Materials: 1996 - Petroleum Refining Performance
API PUBL 346 1998-11-00 Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines
API PUBL 347 1998-10-00 Hazardous Air Pollutant Emissions from Gasoline Loading Operations at Bulk Gasoline Terminals
API PUBL 348 1998-08-00 Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Volume 1 Development of Emission Factors Using API/WSPA Approach
API DR 351 1996-00-00 Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity
API PUBL 351 1999-04-00 Overview of Soil Permeability Test Methods
API TR400 1993-00-00 Preliminary Study of the Effect of Toluene on Pregnancy of the Rat (Inhalation Exposure)
API TR401 1993-00-00 Toluene the Effect on Pregnancy of the Rat (Inhalation Exposure)
API TR 402 1995-00-00 Tertiary-Amyl Methyl Ether (TAME) Toxicity to the Freshwater Alga Selenastrum Capricornutum
API TR 403 1995-00-00 Closed-Patch Repeated Insult Dermal Sensitization Study of Tertiary Amyl Methyl Ether (TAME) in Guinea Pigs (Buehler Method) API TR 404 1995-00-00 Inhalation Oncogenicity Study of
Commercial Hexane in Rats and Mice Part I - Rats Final Abridged Report
API TR 405 1995-00-00 Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part II - Mice Final Abridged Report
API TR 406 1995-00-00 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Daphnids (Daphnia Magna) Under Flow- Through Conditions TSCA Guideline Section Mark 797.1300
API TR 407 1995-00-00 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Mysid Shrimp (Mysidopsis Bahia) Under Static Renewal Conditions TSCA Guideline Section Mark 797.1930
API TR 408 1995-00-00 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Rainbow Trout (Oncorhynchus Mykiss) Under Flow-Through Conditions TSCA Guideline Section Mark 797.1400
API TR 409 1995-00-00 Primary Skin Irritation Study In Rabbits of: API 91-01 and PS-6 Unleaded Test Gasolines (CAIS Abstract No. 42-2014)
API TR410 1996-12-00 Chromosome Aberrations in Chinese Hamster Ovary (CHO) Cells Exposed to Tertiary Amyl Methyl Ether (TAME)
API TR411 1996-12-00 Chinese Hamster Ovary (CHO)/HGPRT Mutation Assay of Tertiary Amyl Methyl Ether (TAME)
API TR 412 1998-04-00 A Range-Finding Developmental Inhalation Toxicity Study of Unleaded Gasoline Vapor Condensate in Rats and Mice Via Whole-Body Exposers
API TR 414 1998-04-00 An Inhalation Developmental Toxicity Study of Unleaded Gasoline Vapor Condensate in the Rat Via Whole-Body Exposure
API PUBL 421 1990-02-00 Monographs on Refinery Environmental Control - Management of Water Discharges Design and Operation of Oil-Water Separators First Edition
API PUBL 422 1994-00-00 Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Document
API RP 500 1997-11-00 Recommended Practice for
Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 Second Edition; Errata 8/17/98
API RP 505 1997-11-00 Recommended Practice for
Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 First Edition; Errata 8/17/98
API API 510 1997-06-00 Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration Eighth Edition; Addendum 1 December 1998; Addendum 1 Errata January 26,1999
API RP 520 PT I 1993-00-00 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part I - Sizing and Selection
API RP 520 PT II 1994-00-00 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II - Installation
API RP 521 1997-03-00 Guide for Pressure-Relieving and Depressuring Systems Fourth Edition; Errata February 15, 1999
API STD 526 1995-00-00 Flanged Steel Pressure Relief Valves API STD 527 1991-00-00 Seat Tightness of Pressure Relief
Valves
API STD 530 1996-00-00 Calculation of Heater-Tube Thickness in Petroleum Refineries
API RP 531M 1980-00-00 Measurement of Noise from Fired Process Heaters
API PUBL 534 1995-01-00 Heat Recovery Steam Generators First Edition First Edition
API PUBL 535 1995-07-00 Burners for Fired Heaters in General Refinery Services First Edition First Edition API RP 536 1998-03-00 Post-Combustion NOx Control for Fired
Equipment in General Refinery Services First Edition
API RP 540 1999-04-00 Electrical Installations in Petroleum Processing Plants Fourth Edition
API STD 541 1995-00-00 Form-Wound Squirrel Cage Induction Motors - 250 Horsepower and Larger
API STD 546 1997-06-00 Brushless Synchronous Machines - 500 kVA and Larger Second Edition
API RP 551 1993-00-00 Process Measurement Instrumentation API RP 552 1994-10-00 Transmission Systems First Edition API RP 553 1998-09-00 Refinery Control Valves First Edition API RP 554 1995-09-00 Process Instrumentation and Control
First Edition
API TP 555 1995-00-00 Process Analyzers First Edition API RP 556 1997-05-00 Instrumentation and Control Systems
for Fired Heaters and Steam Generators First Edition
API STD 560 1995-00-00 Fired Heaters for General Refinery Services
API 570 1998-10-00 Piping Inspection Code; Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems Second Edition
API RP 572 1992-00-00 Inspection of Pressure Vessels API RP 573 1991-00-00 Inspection of Fired Boilers and
Heaters
API RP 574 1998-06-00 Inspection Practices for Piping System Components Second Edition
API RP 575 1995-00-00 Inspection of Atmospheric and Low-Pressure Storage Tanks
API RP 576 1992-00-00 Inspection of Pressure-Relieving Devices First Edition
API RP 578 1999-05-00 Material Verification Program for New and Existing Alloy Piping Systems First Edition API STD 589 1998-07-00 Fire Test for Evaluation of Valve
Stem Packing Second Edition API STD 590 1985-00-00 Steel Line Blanks
API RP 591 1998-02-00 User Acceptance of Refinery Valves Second Edition
API STD 594 1997-11-00 Check Valves: Wafer, Wafer-Lug, and Double Flanged Type Fifth Edition
API STD 598 1996-10-00 Valve Inspection and Testing Seventh Edition; Errata August 22,1997
API STD 599 1994-00-00 Metal Plug Valves - Flanged and Welding Ends Fourth Edition
API STD 600 1997-02-00 Steel Gate Valves - Flanged and Butt-Página 23
Welding Ends, Bolted and Pressure Seal Bonnets Tenth Edition; Errata -June 5, 1998
API STD 602 1998-10-00 Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends Seventh Edition
API STD 603 1991-00-00 Class 150, Cast,
Corrosion-Resistant, Flanged-End Gate Valves Fifth Edition R(1996)
API STD 607 1993-05-00 Fire Test for Soft-Seated Quarter-Turn Valves Fourth Edition
API STD 608 1995-00-00 Metal Ball Valves - Flanged, Threaded, and Welding End
API STD 609 1997-05-00 Butterfly Valves: Double Flanged, Lug- and Wafer-Type Fifth Edition
API STD 610 1995-00-00 Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services API STD 611 1997-06-00 General-Purpose Steam Turbines for
Petroleum, Chemical, and Gas Industry Services Fourth Edition
API STD 612 1995-00-00 Special-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services API STD 613 1995-00-00 Special Purpose Gear Units for
Petroleum, Chemical, and Gas Industry Services API STD 614 1999-04-00 Lubrication, Shaft-Sealing, and
Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services Fourth Edition
API STD 616 1998-08-00 Gas Turbines for Petroleum, Chemical, and Gas Industry Services Fourth Edition
API STD 617 1995-00-00 Centrifugal Compressors for
Petroleum, Chemical, and Gas Service Industries API STD 618 1995-00-00 Reciprocating Compressors for
Petroleum, Chemical, and Gas Industry Services API STD 619 1997-06-00 Rotary Type Positive Displacement
Compressors for Petroleum, Chemical, and Gas Industry Services Third Edition
API STD 620 1996-02-00 Design and Construction of Large, Welded, Low-Pressure Storage Tanks Ninth Edition; Addendum 1-December 1996; Additional Pages for Addendum 1-February 1997; Addendum 2-December 1997; Addendum 3-2-December 1998
API STD 650 1998-11-00 Welded Steel Tanks for Oil Storage Tenth Edition
API RP 651 1997-12-00 Cathodic Protection of Aboveground Petroleum Storage Tanks Second Edition
API RP 652 1997-12-00 Lining of Aboveground Petroleum Storage Tank Bottoms Second Edition
API STD 653 1995-12-00 Tank Inspection, Repair, Alteration, and Reconstruction Second Edition; Errata February 1996; Errata May 1996; Follow Up to Errata May 1996; Addendum 1-December 1996; Addendum 2-December 1997; Addendum 3-December 1998
API STD 660 1993-00-00 Shell-and-Tube Heat Exchangers for General Refinery Services
API STD 661 1997-11-00 Air-Cooled Heat Exchangers for General Refinery Services Fourth Edition API STD 662 1995-00-00 Plate Heat Exchangers for General
Refinery Services
API STD 670 1993-00-00 Vibration, Axial Position, and Bearing Temperature Monitoring Systems Third Edition; Replaces STD 678
API STD 671 1998-10-00 Special-Purpose Couplings for Página 24
Petroleum, Chemical, and Gas Industry Services Third Edition
API STD 672 1996-00-00 Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services
API STD 674 1995-00-00 Positive Displacement Pumps - Reciprocating
API STD 675 1994-00-00 Positive Displacement Pumps - Controlled Volume
API STD 676 1994-00-00 Positive Displacement Pumps - Rotary API STD 677 1997-07-00 General Purpose Gear Units for
Petroleum, Chemical, and Gas Industry Services Second Edition
API STD 681 1996-02-00 Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services First Edition
API STD 682 1994-00-00 Shaft Sealing Systems for Centrifugal and Rotary Pumps
API RP 683 1993-00-00 Quality Improvement Manual for
Mechanical Equipment in Petroleum, Chemical, and Gas Industries
API PUBL 684 1996-02-00 Tutorial on the API Standard Paragraphs Covering Rotor Dynamics and
Balancing: an Introduction to Lateral Critical and Train Torsional Analysis and Rotor Balancing First Edition
API RP 686 1996-04-00 Recommended Practices for Machinery Installation and Installation Design First Edition
API RP 750 1990-01-00 Management of Process Hazards First Edition; Erratum - 1990
API RP 751 1999-02-00 Safe Operation of Hydrofluoric Acid Alkylation Units Second Edition
API RP 752 1995-05-00 Management of Hazards Associated with Location of Process Plant Buildings CMA
Manager's Guide; First Edition; Errata - 1995 API PUBL 760 1998-06-00 Model Risk Management Plan Guidance
for Petroleum Refineries Guidance in Complying with EPA's RMP Rule (40 Code of Federal
Regulations, Part 68) Developments: June 1998 to June 1999
API PUBL 761 1998-06-00 Model Risk Management Plan Guidance for Exploration and Production (E&P) Facilities Guidance in Complying with EPA's RMP Rule (40 Code of Federal Regulations, Part 68) Second Edition - Developments: June 1998 to June 1999 API PUBL 850 1997-11-00 API Standards 620, 650, and 653
Interpretations - Tank Construction and In-Service Inspection Answers to Technical Inquiries; First Edition
API PUBL 910 1997-11-00 Digest of State Boiler, Pressure Vessel, Piping and Aboveground Storage Tank Rules and Regulations Eighth Edition
API RP 920 1990-00-00 Prevention of Brittle Fracture of Pressure Vessels
API RP 936 1996-10-00 Refractory Installation Quality Control Guidelines-Inspection and Testing Monolithic Refractory Linings and Materials First Edition
API PUBL 937 1996-00-00 Evaluation of Design Criteria for Storage Tanks with Frangible Roof Joints API PUBL 938 1996-00-00 Experimental Study of Causes and
Repair of Cracking of 1 1/4Cr- 1/2Mo Steel Equipment
API PUBL 939 1994-00-00 Research Report on Characterization and Monitoring of Cracking in Wet H2S Service API RP 941 1997-01-00 Steels for Hydrogen Service at
Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants Fifth
Edition; Errata October - 1997; Supplement 1-1998
API RP 945 1997-10-00 Avoiding Environmental Cracking in Amine Units Second Edition
API PUBL 959 1982-00-00 Characterization Study of Temper Embrittlement of Chromium-Molybdenum Steels API RP 1004 1988-00-00 Bottom Loading and Vapor Recovery for
MC-306 Tank Motor Vehicles Seventh Edition (R 1995)
API RP 1102 1993-00-00 Steel Pipelines Crossing Railroads and Highways
API STD 1104 1994-00-00 Welding of Pipelines and Related Facilities
API RP 1107 1991-00-00 Pipeline Maintenance Welding Practices
API RP 1109 1993-00-00 Marking Liquid Petroleum Pipeline Facilities
API RP 1110 1997-03-00 Pressure Testing of Liquid Petroleum Pipelines Fourth Edition
API RP 1111 1999-07-00 Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) Third Edition
API RP 1112 1997-11-00 Developing a Highway Emergency Response Plan for Incidents Involving Hazardous Materials Third Edition
API PUBL 1113 1993-00-00 Developing a Pipeline Supervisory Control Center Second Edition
API RP 1114 1994-00-00 Design of Solution-Minded Underground Storage Facilities
API API 1115 1994-00-00 Operation of Solution-Mined Underground Storage Facilities First Edition API RP 1117 1996-00-00 Movement of In-Service Pipelines API RP 1118 1991-00-00 Training and Qualification of Liquid
Pipeline Controllers
API RP 1119 1991-00-00 Training and Qualification of Liquid Pipeline Operators
API RP 1120 1992-00-00 Training and Qualification of Liquid Pipeline Maintenance Personnel
API RP 1123 1996-00-00 Development of Public Awareness Programs by Hazardous Liquid Pipeline Operators API RP 1124 1991-00-00 Ship, Barge, and Terminal Hydrocarbon
Vapor Collection Manifolds
API RP 1125 1991-02-00 Overfill Control Systems for Tank Barges First Edition
API RP 1127 1993-00-00 Marine Vapor Control Training Guidelines
API RP 1129 1996-00-00 Assurance of Hazardous Liquid Pipline System Integrity
API PUBL 1130 1995-10-00 Computational Pipeline Monitoring First Edition
API PUBL 1132 1994-00-00 Effects of Oxygenated Fuels and Reformulated Diesel Fuels on Elastomers and Polymers in Pipeline/Terminal Components API RP 1139 1993-00-00 (Withdrawn)Training Guidelines for
Tank Ship Personnel
API RP 1140 1991-00-00 (Withdrawn)Guidelines for Developing Bridge Management Teams
API RP 1141 1994-00-00 Guidelines for Confined Space Entry Página 26
