company profile

(1)

+ 880-1841-436100

www.reverie-bd.com

company

(2)

(3)

1 | P a g e

Introduction

As the country is growing, there have been a large demand of detailed

engineered solution. We understood that deicit in the market. We made

“REVERIE” for you.

Consisting of about 200 Engineers and 400 (Appx) workers, REVERIE is a

big team to support you to any kind of Electrical solution.

• We do Design, Supply, Construction, Installation, Commissioning and

Maintenance of High Voltage Substation Upto 400kV.

• To facilitate more to you, REVERIE has established a highly integrated

factory where we produce any size of Transformers and switchgears

with 33kV Max. voltage.

• There is a unique product of us; it is Genset and Engine Control System.

Many of our customers are enjoying the maximum use of their generator

resources with our solution.

• Where the world is trending to go more towards the Automated

system, we made the service available just in the door step. We provide

the extensive automation solution for both Industries and Substation.

Being an ISO 9001:2008 Company, the desire of REVERIE has always

been the customer satisfaction. This is our pride that customers provide

us repeated orders which shows we are on the right track on satisfying

our valuable customer.

(4)

1. Products and Services

1.1. Design, Engineering, Transportation, Civil, Installation, Testing and

Commissioning Of Electrical Substation

Products & Services

Transportaon

REVERIE does not have their own transportaon System. To provide a “one point” service, REVERIE Oﬀers:

• Customs Clearance of Equipment • Inland Transportaon of Equipment • Loading and Unloading Services

• Shiing and Placing Large Transformers Into The Base

Substaon Engineering • Fault Level Calculaon

• Earth Resisvity Test and Calculaon • Step and Touch Voltage Calculaon • Cable Sizing Calculaon

• CT, PT Sizing Calculaon • Relay Seng Calculaon

• Secondary Scheme, Protecon Scheme Design • Cable Schedule

Substaon Design:

• Site Survey and Single Line Diagram Design • Layout Design

• Project Schedule preparaon and complete set of esmaon of all kind of work

• Consultancy, Drawing and Requirement to Connect With Transmission Line

• Earthing/ Grounding System Design (IEEE-80)

(5)

Products & Services

Installaon of Substaon

• Installaon of Power Transformers, GIS, AIS, Panels Etc.

• Installaon Of Steel Structure With On Site Fabricaon

• Cable Laying

• Cable Tray Installaon and Fabricaon

• Grounding System Installaon

Tesng And

Commissioning

With A Huge Number of Tesng Equipment and Experts, REVERIE is fully capable to Test and Commission upto 400kV without Any Other Expert support. REVERIE provides

• Rao, Polarity, Tan-Delta, Insulaon Resitance, Winding Resistance, Polarity, Capacitance, Knee Point Voltage, Magnec Balance Test

• Breaker Timing and Analyzing

• Transformer Oil Test

• Protecon Relays Test of o ABB o SIEMENS o SCHNIEDER o ALSTOM o GE o SEL

• Protecve Funcon Test Of o Over Current o Earth Fault o Diﬀerenal o Distance o Busbar Diﬀerenal o Auto-Recloser o Power Swing o SOTF Civil Construcon

Though Completed a Few Number of Jobs in Civil, REVERIE has invested to buy machineries and equipment for civil works. REVERIE is able to provide:

• Sub-soil Invesgaon Work

• Pile Integrity Test& Pile Load Test

• Material Test, Slump Test and Compressive Strength Test of Concrete

• Complete Civil Design of Substaon & Transmission Line Construcon procedure and construcon

(6)

2.2. Civil Construction

REVERIE started civil construcon aer a handful success in various projects aer first two years. Reverie now holds possession a few equipments for different construcons and offers any kind of construcons affiliated with Substaon construction, Transmission Line construcon, Power Plant construcon, etc. Moreover, REVERIE developed an in-house dedicated civil design team for these kind of construcon. This design team has experse in Geotechnical and Structural Design. REVRIE also offers any kind of consultancy regarding Substaon construcon and Transmission Line construcon.ZĞǀĞƌŝĞĂůƐŽŽĨĨĞƌƐĨĂďƌŝĐĂƚŝŽŶΘĐŽŶƐƚƌƵĐƚŝŽŶŽĨƐƚĞĞůƐƚƌƵĐƚƵƌĞƚŚƌŽƵŐŚĂƐŝƐƚĞƌĐŽŶĐĞƌŶ͘

Geotechnical Invesgaon & Concrete Test

• Sub-soil Invesgaon work which includes Standard Penetraon Test, Field Density Test, Standard Proctor Test, Modiﬁed Proctor Test, Field Permeability Test etc.

• REVERIE oﬀers in-situ tesng only. Laboratory tests generally carried out from reputed third party agency. However, REVERIE has a plan to build an in-house Laboratory structure, very soon.

• For concrete slump test and strength test, REVERIE has an in-house facility along with a ﬁeld tesng team.

Construcon

• REVERIE successfully completed 33 kV & 132 kV Substaons including Land Development work ,

Sub-• REVERIE has experse in Transmission Line construcon along with various Power Plant structure construcon

• REVERIE owns a few Volumetric Concrete Batchine Machine and willing to purchase an Automac Batching Plant with Transit Mixture very shortly

4

Pile Construcon &Pile Related Tests • REVERIE oﬀers Design, Construcon and

Consultancy for both Cast-in-situ & Pre-cast piling work

• REVERIE owns 8nos Piling Rig for Cast-in-situ piling work by Percussion method

• REVERIE also oﬀers Cast-in-situ piling using Rotary method& Pre-cast piling work

• REVERIE oﬀers Pile Integrity Test, Stac Compressive Load Test, Stac Tension Load Test & Lateral Load Test for both Cast-in-situ & Pre-cast piles

• REVERIE also oﬀers Pre-Fabricated Steel Structure Shop Fabricaon and Erecon work

(7)

Survey Work

• REVERIE has developed a dedicated survey team to carry out various survey works in various sites

• REVERIE owns every kind of required equipment with updated calibraon to carry out Topographic Survey work

• REVERIE has carried out Topographic Survey works on their own in several projects. REVERIE provide standard survey report by using AUTODESK Analyst soware

• REVERIE provides As-built Drawing aer compleon of any project construcon work

Design & Consultancy

• REVERIE oﬀers both GIS and AIS Substaon Design and consultancy, which includes 400 kV/230 kV/132 kV/33 kV substaons and Transmission Lines

• REVERIE oﬀers any kind of RCC and Steel Building design and consultancy

• REVERIE oﬀers any kind of Engineering services for substaon renovaon and extension works also

• REVERIE design team has experse in any kind of RCC Structure and Steel Structure Design

• REVERIE oﬀers any kind of Construcon Procedure aﬃliated with their work

REVERIE oﬀers project scheduling before starng construcon and co-ordinate with the same

Quality &HSE Policy

• REVERIE oﬀers any kind of construcon work conforming to the approved code and conduct. REVERIE basically follows ASTM, BNBC, BS and IS

• To ensure ﬁeld Quality Control, Quality Assurance and Quality Management, REVERIE has established one in-house QA/QC team along with Laboratory facilies

• REVERIE has an own Health, Environment & Safety policy for construcon work

• REVERIE has established a dedicated in-house HSE team to ensure maximum safety for workers REVERIE generally follows codes from Occupaonal Safety & Health Administraon (OSHA), although client’s requirement is the ﬁrst thing REVERIE follows

(8)

2.3.Industrial & Substation Automation

REVERIE develops and implement project in process automaon and control system with highly expert engineers who are working with PLC and instrumentaon for many years.

As a Total Turn Key Based Soluon, REVERIE oﬀers

• Distributed Control System With Central Monitoring and Supervisory Controlling • Discrete Automaon With PLC

• Remote And Central Monitoring System

• Field Instrumentaon

Moreover REVERIE provides services on Automaon and Control System services in the industries

• Packaging Industries

• Cement Industries

• Steel Mills

• Pharmaceucals

• Reﬁneries

• Paper Mills etc.

The Service Includes Equipment supply and installaon at site

• Trouble Shoong the control system

• Backing up the control system

• Onsite tesng and commissioning

• Upgrading control system Machines

• Yearly Maintenance

2.4. Substaon Automaon

REVERIE works with both IEC-61850 and MODBUS based substaon monitoring and control system. The service under this secon includes:

Designing overall conceptual diagram of SAS. Making I/O list

Making and Tesng Connecon Diagram Establishing Communicaon Amongst Devices And Test Them.

(9)

Products & Services

To ensure the smooth running of Genset and engines, it is necessary to control and supervise the operations within the system. REVERIE works with a Czech Republican company ComAp who is specialized in creating electronic control and management solutions for use in the power generation industries and drive power markets. The portfolio of products, software and accessories is designed to support

• Generator Synchronization Panels(DG-Gas-HFO)

• AFR Control System for Gas Engine

• Engine & Fire Pump Control System

• Compressor Control System

• Marine Engine & Gen set Control System

• Bi-Fuel Control System for DG Engine & Generators

• Load Transfer Switch

• Remote Monitoring & Control System of Gen-Set

• Testing of Generator Protection Scheme

• SCADA Integration for all Gen-sets for Power Station

Reverie Power & Automation Engineering Ltd. are a highly experienced in power generation solutions business, using industry leading products.

We aim to provide our clients with comprehensive solutions and support, this support package may be as simple as design and commissioning services through to a full design and build power plant.

Our aim is to solve your problems, reassure you about the implementation process.

Our team listen to the designers and clients, their existing and/or new requirements; we establish an understanding of your business, enabling us to work through the implementation process with minimal disruption to the day to day business as possible, to cover all "what if scenario’s".

We establish a conceptual solution which is discussed and reviewed at all levels and constantly throughout the project to ensure the delivery meets to initial concept.

Paralleling (synchronizing) diesel generation is nothing new, but again for some the speed of response of an asset is crucial, for others resilience to business loads is priority. Synchronizing systems, be it multiple generators or mains & generator paralleling is our "core" business; we care about the implementation, the sequencing, customer expectations, our aim therefore is to ensure we deliver a satisfactory solution to your business.

(10)

2.6. Products

Distribuon and Power Transformer:

REVERIE oﬀers a wide range of Distribution and Power Transformers to meet the requirements of power distribution in factories, utilities, industries, commercial buildings etc. These transformers are manufactured at our factory in Polash, Narsingdi.

• 50kVA – 5 MVA Capacity • 5MVA-28MVA Capacity

• 33kV, 11kV, 6.6kV Distribuon& Power Transformers of any vector group. • Oil Immersed

• Natural Cooling (ONAN)

• Oﬀ-load or On Load tap changer for both outdoor and indoor type.

• Standard an-corrosion surface treatment and coang.

Reverie maintains the total manufacturing in such a way that can ensure the reliable, eﬃcient and long term operation of the distribution transformer. Reverie uses the raw materials such as core, conductors and transformer oils of renowned brand. The skilled team of engineers design and monitors the production of these transformers. The workers involved in the manufacturing process are very experienced and expert.

Panels:

Substation Control & Relay Panels (Up to 230kV Substation)

HT SwitchGear, LT & PFI Panels

• Generator Control & Relay Panels

• Synchronizing Panels

• AMF Panels

• Transformer RTCC Panels

• Metering Panels

• Control Centers

• PLC Based Control Panels

• AC Drives / Softstarter Panels

• SCADA System

• Capacitor Bank Control & Relay Panels

• Instrumentation Panels

• Motor Control Panels

• Power Distribution Boards

• NGR/NER Panels

(11)

Products

REVERIE deals with various products of ComAp. • Genset Controllers o InteliNano NT o InteliLite NT o InteliCompact NT o InteliGen NT o InteliSys NT o InteliMains NT • ATS controllers o InteliATS NT STD o InteliATS NT PWR • Engine controllers

o InteliDriveNano (Engine Controller for Pumps and Compressors)

o InteliDrive Lite (Engine Controller for Pumps and Compressors)

o InteliDrive Lite FPC (Engine Controller Designed for Diesel Driven Fire Pump Applicaons)

o InteliDrive® CCU (Air fuel rao of gas engines controller) • Baery Charger • Accessories o Extension Modules o Communicaon Modules o Remote Display o Dongles

o ECU Communicaon Modules • Local Monitoring & Control System • Remote Monitoring & Control System ComAp is a dynamic internaonal company with

a solid reputaon for delivering innovave electronic soluons to the power generaon, industrial engine and equipment market. By providing customers with state-of-the-art products, ComAp has built a name for delivering excellent reliability and good value.

Governors America Corp. is a leading provider of innovave engine control products to a worldwide list of customers. Their dedicaon and focus on our world market has resulted in a vercally integrated company with complete design, development, producon, and markeng capabilies for its family of electromechanical and electronic devices for precise engine control and system integraon.

Governors America Corp. (GAC) is a leading provider of engine governing and system controls to a

worldwide list of equipment manufacturers and power providers. From isochronous governors and fuel controls to sophiscated mul-engine load sharing/power control systems, GAC has innovave soluons to meet and exceed all of your needs.

(12)

Products & Services

3. Manufacturing Facility

1. Transformer Section 2. Fabrication Section

3. Radiator Production Line 4. Paint Section

5. Switchgear & Assembly Section 6. Quality Control Section

Manufacturing Product:

Distribuon Transformers, HT Switchgear, LT Switchgear, PFI Panel, MV/HV Control Relay

Panels, MCC, Metering Panels,

Synchronizaon Panel, Distribuon Panel

Factory Area 75000 Sqft Narsingdi Factory:

Narsinghachar, Noakanda,Gozaria, Palash, Narsingdi.

(13)

Chairman Md. Zahid Hossain Managing Director Md. Ariful Hoque A B Shiddik Director S M Faysal Director Abdur Rahman Director

Finance & Accounts

Supply Chain Management Engineering Management Md. Jahangir Al Jilani Director Production

Low & Medium Voltage Project

High Voltage Project

Testing and Commissioning

Design & Civil Engineering Automation Engineering Procurement & Store HR, Safety, IT Commercial

5. Company Structure

5.1. Departments

(14)

13| P a g e

6.Financial Strength

REVERIE has enough ﬁnancial strength to complete the corresponding project. As per the Bank ra�ng,

REVERIE has a very good credit ra�ng. On a credit ra�ng report, REVERIE has been marked as “Growing

Company”.

6.1.Yearly Turnover

Distributor Certificate

*

Expected

(15)

8. Competitive Strength

• Important Resources Strengths, Core Competencies And Compeve

Capabilies.

• A Disncve Competence In A Compevely Important Value Chain Acvity

• Growing Customer Base And Customer Loyalty

• In A Favorably Situated Strategic Group Who Are Well Known To The Ulies

• Well-Posioned In Aracve Market Segments

• Cost Advantage

• Above-Average Technological And Innovaonal Capability

• Ample Financial Resources

7. Ofices

7.1.Head Ofice

Evergreen Plaza (5

th

& 7

th

Floor) 260/B, Tejgaon Industrial Area, Dhaka-1208

Tel: +8801841436100 Email: [email protected]

www.reverie-bd.com

7.2.Narsingdi Factory

Narsinghachar, Noakanda, Gozaria, Palash, Narsingdi

(16)

15| P a g e

EPC Project:

Design, Supply, Civil Construction Installation, Testing &Commissioning 230 kV Transformer GIS & AIS

Substation at Kushiara (MAX Group).

EPC Project: 3MV Solar Power Plant at Sarishabari (Engreen).

Design, Civil Construction, Supply, Installation,

Testing & Commissioning of 230 kV AIS Substation for 200 MW HFO Power Plant, Chandpur

(Desh Energy)

(17)

15| P a g e

Erection Testing and Commissioning PGCB

230/132kV Substation, Barishal

Erection Testing and Commissioning PGCB 230/132kV Substation,

Barishal

Erection Testing and Commissioning PGCB 230/132kV Substation Siddirgonj

(18)

1ϲ | P a g e

Project Picture

Erection 570MV at

Horipur

Erection 570MV at Horipur

Erection Testing and Commissioning PGCB 132Kv GIS SubstationSatmosjit Road

Dhanmondi

Erection Testing 230KV Power Transformer at

(19)

ϳ

Project Picture

Erection Testing 230KV Power Transformer at NWPGCL Sirajgong

Transformer Base at Bhola 230 kV

Land Development Work at

Dhamrai 132 kV

Steel structure building work Reverie Factory at

Narsinghachar, Noakanda,Gozaria, Palash, Narsingdi

(20)

Civil, Erection Testing and Commissioning work.

(21)

Project Picture

Supply Installaon Electrical Substaon Project

(22)

| P a g e

CPC 100

Multi-functional primary test system for substation Commissioning and maintenance. The patented test system replaces numerous individual testing devices and offers new, innovative testing methods. This makes testing with the CPC 100 a time-saving and cost-effective alternative for conventional testing methods. Despite its expansive capabilities, the CPC 100 is very simple to use.

Using the CPC 100, electrical tests on various assets can be performed: Universal testing device for electrical diagnostics Electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit, breakers can be performed with the CPC 100.

CMC 365

The CMC 356 is the universal solution for testing all

generations and types of protection relays. Its powerful six current sources (three-phase) mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high burden electromechanical relays with very high power demands.

Very powerful current sources for testing high burden electromechanical relay, High current amplitudes for 5 A relay testing, High accuracy and versatility f or testing static and numerical relays of all types Integrated network for testing IEC 61850 IEDs Continuous synchronized outputs with CMIRIG -B (e.g. for PMU or MU testing) Primary injection capabilities for commissioning tasks.

This primary current injecon tesng system is designed to perform primary tests requested in substaons commissioning. It allows to perform accurate tests on CTs, VTs, PTs and ground grid.

Fully automac

Primary injecon tesng capabilies: up to 800 A or up to 5000 A / 7000 A, with the oponal module BUX 5000

Variable output frequency: 15 - 500 Hz

Power dissipaon factor test with the oponal module TD 5000 ( voltage up to 12 kV)

2000 v AC high-pot test

Local control by large color display

PADS - Power Apparatus Diagnosc Soware for automac tesng, assessment and report

IEC 61850-9-2 communicaon protocol

Patented technology for Capacitance and Tan Delta measurement

USB interface and Ethernet interface for PC connecon.

STS 5000

Toos &

Instrument

20

(23)

| P a g e

Toos &

Instrument

20 Variable Frequency Series Resonance

Test Set

HYXZ-3000kVA/500kV

1. The voltage ratio measurement for three or singe phase transformer

2. The group vector measurement for three phase transformer.

3. The polarity measurement for single phase transformer or CT/PT

4. Voltage ratio error calculation

5. Current transformer ratio measurement

6. Excitation current measurement in ratio testing 7. Reproduction the AC test voltage from power source

to reduce the eﬀects of bad power source

8. Save the test results in the memory internal the tester 9. Print the test results by micro printer

10. Reverse connection detect unit to prevent the high voltage injected to operator

11. Over current protection unit integrated in software and hardware

12. Upload the test results to PC by RS232 and make word report by software

Transformer Turn Ratio Tester (HYBC-901)

CT-PT Analyzer HYVA-404

HYVA404 is unique mulfuncon instrument designed to meet the IEC60044-1, IEC60044-2, IEC60044-6 and C57.13 standards for performing excitaon, rao and phase error, polarity, secondary loop burden and coil resistance on current or voltage transformer. The instrument provides fully automac tesng and calibraon for all types of low leakage ﬂux current transformer and inducve voltage transformer. The maximum knee point voltage of sample CT could be reached 8.4kv. The standards support by HYVA404 include IEC60044-1, IEC60044-2, IEC60044-6 and C57.13

It is applied to testing the insulation ability of insulation materials in power equipment. The frequency of test voltage is adjustable which would lead to series resonance in testing circuit. Both the conductors connected in test circuit in series and the capacitors connected in test circuit in parallel are also adjustable. That makes the test set is widely applied in GIS, Power cable and generator insulation tester.

Technical Parameters:

1 Max voltage output: 0~1000KV; 2 Max output Capacity: 0~6400KVA; 3 Test frequency range: 30~300HZ; 4 Frequency setting resolution: 0.1HZ;

5 Test voltage waveform: sine wave, waveform deviation factor : ≤1%;

(24)

| P a g e

Toos &

Instrument

Closing and opening time measurement of 12 channels. Max diﬀerence of closing or opening time measurement of three phases. C-O and O-C time measurement. Rated operation sequence test. Bounce time and frequency measurement of breaker closing Circuit breaker closing and opening speed measurement. Travel-time, Coil current-time curve of circuit breaker operation measurement. Travel and clearance of circuit breaker measurement. Variable DC circuit breaker operation power supply. Closing arc resistance value and connected time measurement. Closing time and opening time of graphite circuit breaker measurement Print test results by internal micro printers

There are four DC currents to select for HYZC-20 which has a large output power, the power of the tester itself is very little.

Used four lines, it is quick, stable, high precision for

testing the winding resistance. In addition, it has a strong ability for anti-jamming, over current, over voltage and discharge. The security is also very high, So it is a ideal tester for testing various resistances especially the sensibility equipment.

Contact resistance tester application:

HYHL Series contact resistance tester is applied in circuit breaker testing and power cable connection quality inspection.

The max test current of contact resistance tester could be reached 600A. All the test results could be saved in tester or printed by micro printer.

Contact resistance tester technique index:

Types:

HYHL-100A 100A Contact resistance tester HYHL-200A 200A/100A for choose

HYHL-400A 400A/300A/200A/100A for choose HYHL-600A 600A/400A/300A/200A/100A for choose 2

Circuit Breaker Analyzer

HYGK

-306

Contact Resistance Tester HYHL 100A

(25)

| P a g e

Toos &

Instrument

SG2008 Automatic 10kV Capacitance and Dissipation Factor Set is design to measure dissipation and capacitance in heavy electromagnetic interference environment such as in power plants or substations. Also it can be used in laboratory for high accurate test such as High Voltage (EHV) class Bushings, Winding of transformer (1/2/3 windings), shunt reactors, Current transformer, Capacitor Voltage transformer (CVT), grading capacitors of Circuit Breakers, Surge Arrester and other electrical equipments. The test set is all-in-one structure: including precision digital bridge, 10kV/200mA frequency conversion power unit, reference capacitor (CN) and other electronic circuits. An external power supply can expand the test range. True portability is realized by the lightweight. Simple usage is realized by the full automation. High Performance is realized by the digital process.

FCR-100 high Voltage Divider is a universal high Voltage measuring instruments which can Be used to test Power frequency AC high voltage and DC high voltage for electric power Systems, electrical appliance, electronic equipment manufacturing sector. It includes High voltage testing part & low-voltage measuring instruments. The low-voltage & high voltage part can work separately, so it is of safety and reliability. It is the Upgrading products of

static high voltage meter, packed with aluminum alloy case for Portable.

The T&R 200ADM-P is the most recent addition to the range, and provides commissioning and maintenance engineers with a ﬂexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate. The unit has a range of outputs allowing injection of currents as low as 1mA and as high as 200A. Voltages- up to 240V are available on the main outputs, allowing high impedance current relays and voltage relays to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output-. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety.

2

Tan-Delta Tester

SG2008

Voltage Divider

FRC-100

(26)

Toos &

Instrument

HYYJ-502 is developed according to the national standard GB-86 Insulating Oil Dielectric Strength Testing Method. LCD screen can display test procedure and test result. All the human interaction operations complete by the rotating mouse. It is very easy for customers to measure the breakdown voltage of all kinds of oil by HYYJ-502. You can print the test result by the micro printer internal the tester. Of course, you can upload the test data to PC from RS232 for data analyzing. The special circuit design makes the tester has a good performance at stability and anti-noise.

The Easidew Portable Hygrometer has been designed to make spot checks of the dew point in air and gases as simple as possible. This completely self-contained instrument weighs only 4kg and is delivered ready to use. Simply connect your sample gas to the Quick Connect ﬁttings, turn on the instrument and it will automatically begin to measure the dew point of the applied sample.

W ide range measurements from 500V to 5000V and up to 1000GΩ. Large digital display with Bar Graph indication and back light. Polarization Index measurement (PI). Timer measurement function. Indication of Output voltage and Discharge voltage. Auto-discharge function and Voltage output warning function. Auto power oﬀ and Battery Check. Safety standard IEC 61010-1 CAT III 600V