Cement Retainer_bridge Plug

(1)

This document contains Confidential Information of Baker Hughes Incorporated (Baker) and is furnished to the customer for information purposes only. It is This document contains Confidential Information of Baker Hughes Incorporated (Baker) and is furnished to the customer for information purposes only. It is requested that this document not be reproduced in any way whatsoever, in part or in whole, or distributed outside the customer organization without first obtaining requested that this document not be reproduced in any way whatsoever, in part or in whole, or distributed outside the customer organization without first obtaining the express written authorization of Baker. This document is the property of Baker and returnable on request of Baker.

the express written authorization of Baker. This document is the property of Baker and returnable on request of Baker. ©© AugusAugust, 20t, 2000, 00, BakeBaker Hugr Hugheshes Incorporated. Incorporated.

REMEDIAL SYSTEMS

TECHNICAL UNIT

4038-6 & 4413-1 4038-6 & 4413-1 Date:August 2, 2000 Date:August 2, 2000 Page:1 of 16 Page:1 of 16

Models “N-1” and “NC-1” Bridge Plugs and

Wireline Adapter Kit

Product Family Nos. H40120, H40122, H40121, H40123, H43824 and H43825

Introduction

Th

The e BaBakeker r MoModedel l “N“N-1-1” ” and and “N“NC-C-1” 1” BrBrididgege Plugs are

Plugs are high performanhigh performance drillable bridge ce drillable bridge plugsplugs,, commo

commonly used nly used for zonal for zonal isolatisolation during ion during stimustimula- la-tion or cementing jobs, or for temporary and tion or cementing jobs, or for temporary and per-manent abandonments.

manent abandonments.

The Model “N-1” can easily be converted to a The Model “N-1” can easily be converted to a Model “K-1” Cement Retainer or a Model “NC-1” Model “K-1” Cement Retainer or a Model “NC-1” Bri

Bridge Pldge Plug.ug. The MoThe Modeldel “NC“NC-1”-1” isis a modia modifiefied Moded Modell “N-1” Bridge Plug for use primarily in gas well “N-1” Bridge Plug for use primarily in gas well ap-plications. The design of the “NC-1” allows the plications. The design of the “NC-1” allows the up-per portion of the body and the bridging plug to be per portion of the body and the bridging plug to be drilled out, permitting pressure equalization across drilled out, permitting pressure equalization across the tool before drilling out the upper slips. A shear the tool before drilling out the upper slips. A shear ring mechanism is used to minimize the amount of ring mechanism is used to minimize the amount of material to be drilled out by the center of the drill material to be drilled out by the center of the drill bit.

bit.

Features /

Features / Benefit

Benefits

s

••

C

hoice In Settinghoice In Setting -- Wireline, mechanical, and Wireline, mechanical, and hydraulic.

hydraulic.

••

H

igh Performance - 10,000 psi and 400igh Performance - 10,000 psi and 400oo_F_{F in}_in

most sizes (see Specification Guide). most sizes (see Specification Guide).

••

S

uperior Running Characteristics - Increaseduperior Running Characteristics - Increased clear

clearance and ance and locked construclocked construction for tion for fastefaster,r, sa

safefer r rurun-n-in in wiwith th papackckining g elelememenent t lolockckeded against swab-off forces.

against swab-off forces.

••

B

odody y LoLocck k RiRinng g - - TTraraps ps sesetttiting ng ffororce ce inin element to maintain pack-off during pressure element to maintain pack-off during pressure reversals.

reversals.

••

A

dadaptptabable le - - “N“N-1-1” ” and and “N“NC-C-1” 1” BrBrididge ge PlPlugugss co

consnsisist t of of a a babasisic c uniunit t whwhicich h cacan n easeasilily y bebe converted to mechanical or wireline set or to a converted to mechanical or wireline set or to a Model “K-1” cement retainer.

Model “K-1” cement retainer.

Wireli

Wireline

ne Set

Set

“N-1” Wireline Set Bridge Plug, H40120 “N-1” Wireline Set Bridge Plug, H40120 “NC-1” Wireline Set Bridge Plug, H40121 “NC-1” Wireline Set Bridge Plug, H40121

Mechani

Mechanical

cal Set

Set

“N-1” Mechanical Set Bridge Plug, H40122 “N-1” Mechanical Set Bridge Plug, H40122 “NC-1” Mechanical Set Bridge Plug H40123 “NC-1” Mechanical Set Bridge Plug H40123

M

Mooddeel l ““NN--11””, , MMooddeel “l “NNCC--11”” S

Siizze e 11AAAA--55AAA A SSiizze e 11AAAA--55AAAA Draw

(2)

WARNING

Use of Baker equipment contrary to Use of Baker equipment contrary to manufac

manufacturer’s specificaturer’s specification may tion may result inresult in property damage, serious injury or fatality. property damage, serious injury or fatality.

Unit No. 4413 Unit No. 4413 Index: 304.00

Index: 304.00 Page Page 2 2 of of 1616

Specification Guide

C

Caassiinngg//TTuubbiinng g TTooooll Preferred Preferred CasingCasing ID Range

ID Range DifferentialDifferential Pressure Pressure (psi) (psi) Temperature Temperature Rating ( Rating (°°F)F) OD OD (in.) (in.) Wt Wt (lbs/ft) (lbs/ft) SizeSize Max Max ODOD (in.) (in.) Min Min (in.) (in.) Max Max (in.) (in.) 770 0 HHD D 990 0 HHDD 4-1/2 4-1/2 99..55--1166..6 6 11AAA A 33..55993 3 33..88226 6 44..009900 10,000 10,000 up up to to 225 225 125 125 to to 400* 400* 5 5 11.5-20.811.5-20.8 1 1BBB B 33..99337 7 4..141554 4 44..556600 5-1/2 5-1/2 26.0-32.3 26.0-32.3 1 144--223 3 22AAA A 44..33112 2 44..55880 0 55..004444 6 6 18-2618-26 2 2BBB B 44..99337 7 5..151440 0 55..555522 7 7 49.549.5 6-5/8 6-5/8 20-3220-32 3 3AAA A 55..44110 0 5..555995 5 66..113355 7 7 32-4432-44 17-35 17-35 3 3BBB B 55..66887 7 6..060000 0 66..553388 7-5/8 7-5/8 45.345.3 20-39 20-39 4 4AAA A 66..33112 2 6..666225 5 77..112255 7-3/4 7-3/4 46.146.1 8-5/8 8-5/8 24-4924-49 5 5AAA A 77..11225 5 7..575111 1 88..009977 8-3/4 8-3/4 49.749.7 9-5/8 9-5/8 32.3-58.4 32.3-58.4 6 6AAA A 88..11225 5 88..44335 5 99..00663 3 88,,000000 9-3/4 9-3/4 59.259.2 9-7/8 9-7/8 62.862.8 10-3/4 10-3/4 6600..77--881 1 66BBB B 99..00000 0 99..22550 0 99..666600 5,0005,000 3 322..7755--6600..7 7 77AAA A 99..44337 7 99..66660 0 1100..119922 11-3/4 11-3/4 6600..00--8833..0 0 77BBB B 99..99337 7 1100..11992 2 1100..777722 4,0004,000 4 422--660 0 88AAA A 1100..44337 7 1100..77772 2 1111..115500 13-3/8 13-3/8 8855--11002 2 88BBB B 1111..55662 2 1111..66333 3 1122..115599 3,000 3,000 48-80.7 48-80.7 9 9AAA A 1122..00000 0 1212..11775 5 1122..771155 13-1/2 13-1/2 81.481.4 13-5/8 13-5/8 88.288.2 16 16 1 10099..00--114466..0 0 1111AAA A 1133..99115 5 1144..00000 0 1144..775500 V150 V150 P110 P110 2500 2500 2000 2000 5 555..00--8844..0 0 1111BBB B 1144..55885 5 1144..77000 0 1155..440000 N80N80 J55 J55 1450 1450 1000 1000 * For geothermal applications (no hydrocarbons present), a special “500

* For geothermal applications (no hydrocarbons present), a special “500°°_{F Thermal Service” element is}_{F Thermal Service” element is}

available for most sizes of “N-1” Bridge Plugs. It has been successfully run in steam wells up to 500 available for most sizes of “N-1” Bridge Plugs. It has been successfully run in steam wells up to 500°°_F._F.

8-2-00

Model

Models

s “N-1”

“N-1” and

and “NC-1”

“NC-1” Bridge

Bridge

Plugs and Wireline Adapter Kit

(3)

Accessory Guide

Model “N-1” & Model “N-1” & “NC-1” Bridge Plug “NC-1” Bridge Plug Product Family No. H40120, Product Family No. H40120, H40122, H40123 & H40121 H40122, H40123 & H40121 Wireline Setting Wireline Setting Equipment Equipment Wireline Feeler Wireline Feeler & Junk Catcher & Junk Catcher • •

Product Family No. Product Family No.

H43901 H43901 Shear Release Shear Release Mechanism Mechanism Size Size

Wireline Adapter Kit Wireline Adapter Kit Product Family No. Product Family No. H43824 or H43825 H43824 or H43825

Model “E-4” Model “E-4” Product Family No. Product Family No.

H43702 H43702••

Size

Size GageGage Ring OD Ring OD Release Stud Release Stud (For 400-20) (For 400-20) “N-1” “N-1” Shear Ring Shear Ring (For 400-21) (For 400-21) “NC-1” “NC-1” 1AA 1AA 11AAA A 1100** 10 10 3.6253.625 H01-35672-00 H01-35672-00 7/8" OD 7/8" OD (33,000 lbs) (33,000 lbs) H01-74725-00 H01-74725-00 (30,000 lbs) (30,000 lbs) 1BB 1BB 1BB-2AA 1BB-2AA 20 20 3.968 3.968 20 20 4.000 4.000 2AA 2AA 4.3434.343 2BB 2BB 22BBBB 44..996688 3AA 3AA 3AA-3BB 3AA-3BB 5.406 5.406 H01-34152-00 H01-34152-00 1" OD 1" OD (55,000 lbs) (55,000 lbs) H01-75769-00 H01-75769-00 (50,000 lbs) (50,000 lbs) 3BB 3BB 25 25 5.500 5.500 5.718 5.718 4AA 4AA 44AAAA 66..334433 5AA 5AA 55AAAA 77..115566 6AA 6AA 66AAAA 88..115566 6BB 6BB 66BBBB 99..003311 7AA 7AA 77AAAA 99..664488 7BB 7BB 77BBBB 99..996688 8AA 8AA 88AAAA 1100..446688 8BB 8BB 88BBBB 1111..662255 9AA 9AA 99AAAA 1122..003311 11AA 11AA 1111AAAA 1133..994466 11BB 11BB 1111BBBB 1144..661166 •

• Refer to appropriate tech unit for more details.Refer to appropriate tech unit for more details. * In

* In 4-1/24-1/2" OD 9.5 " OD 9.5 lb casing when a number 10 WLPSA is lb casing when a number 10 WLPSA is not availanot available, a number 20 WLPSA and size 2AA ble, a number 20 WLPSA and size 2AA adapadapter kit may beter kit may be used when well conditions permit.

used when well conditions permit.

Setti

Setting

ng Tool Selection Guide

Tool Selection Guide

Tool Tool “E-4” “E-4” WLPSA WLPSA H43702 H43702 “K-1” “K-1” Mechanical Mechanical H40069 H40069 “CT” “CT” Hydraulic Hydraulic H40062 H40062 “J” “J” Hydraulic Hydraulic H41371 H41371 “NC-1” “NC-1” Mechanical Mechanical H40066 H40066 “Hydro-Set” “Hydro-Set” H40174 H40174 N-1 Wireline Set N-1 Wireline Set Bridge Plug (H40120) Bridge Plug (H40120) YY NN YY YY NN NN

N-1 Mechanical Set Bridge N-1 Mechanical Set Bridge Plug (H40122) Plug (H40122) NN YY NN NN NN YY NC-1 Wireline Set NC-1 Wireline Set Bridge Plug (H40121) Bridge Plug (H40121) YY NN NN YY NN NN

NC-NC-11 MecMechanhanicaicall SetSet BriBridgedge Plug (H40123)

(4)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Operating Instructions

Th

The e MoModedel l “N“N-1-1” ” WiWirereliline ne SeSet t BrBrididge ge PlPlugug (Product Family No. H40120) is set using a Baker (Product Family No. H40120) is set using a Baker Model “E-4” Wireline Pressure Setting Assembly Model “E-4” Wireline Pressure Setting Assembly (P

(Proroduduct ct FaFamimily ly NoNo. . H4H4373702) 02) anand d a a WiWirerelilinene Ada

Adaptepter r Kit Kit (Pr(Produoduct ct FamFamily ily No. No. H43H43824824). ). TheThe Model “N-1” Wireline Set Bridge Plug may be set Model “N-1” Wireline Set Bridge Plug may be set hydraulically using a Model “CT” Hydraulic Setting hydraulically using a Model “CT” Hydraulic Setting Too

Tooll (Pr(Produoduct Fct Famiamily Nly No.o. H40H40062)062),, a Moda Modelel “J”“J” Hy- Hy-dra

drauliulic c SetSettinting g AssAssembembly ly (Pr(Produoduct ct FamFamily ily No.No. H41371) or using a combination hydraulic/tension H41371) or using a combination hydraulic/tension setting method using a Bridge Plug Hydro-Set setting method using a Bridge Plug Hydro-Set Set-ting Tool

ting Tool (Produ(Product ct FamiFamily ly No. H40174). ConsultNo. H40174). Consult the appropriate setting tool tech unit for further the appropriate setting tool tech unit for further in-structions.

structions.

The Model “N-1” Mechanical Set Bridge Plug The Model “N-1” Mechanical Set Bridge Plug (Product Family No. H40122) is set using a (Product Family No. H40122) is set using a modi-fied Model “K-1” Mechanical Setting Tool (Product fied Model “K-1” Mechanical Setting Tool (Product Family No. H40069). Consult the Model “K-1” tech Family No. H40069). Consult the Model “K-1” tech unit for further instructions.

unit for further instructions. The

The ModModel el “NC“NC-1” -1” WirWirelieline ne Set Set BriBridge dge PluPlugg (Product Family No. H40121) is set using a Baker (Product Family No. H40121) is set using a Baker Model “E-4” Wireline Pressure Setting Assembly Model “E-4” Wireline Pressure Setting Assembly (P

(Proroduduct ct FaFamimily ly NoNo. . H4H4373702) 02) anand d a a WiWirerelilinene Adapter Kit (Product Family No. H43825). Adapter Kit (Product Family No. H43825). Alterna-tively, the “NC-1” can be set using standard tively, the “NC-1” can be set using standard hy-draulic setting tools.

draulic setting tools.

The Model “NC-1” Mechanical Set Bridge Plug The Model “NC-1” Mechanical Set Bridge Plug (Product Family No. H40123) is set using a Model (Product Family No. H40123) is set using a Model “NC-1

“NC-1” ” MechaMechanical Setting nical Setting Tool Tool (Prod(Product uct FamilFamilyy No. H40066) which is a modified Model “K-1” No. H40066) which is a modified Model “K-1” Me-ch

chananicical al SeSettttining g ToTool ol (P(Prorodducuct t FaFammilily y NoNo.. H40069). Consult the Model “NC-1” tech unit for H40069). Consult the Model “NC-1” tech unit for further instructions.

further instructions.

Recomme

nded Drill Out

Drill Out Procedu

Procedures

res

For Model “N-1” and “NC-1” Bridge

Plug

If conditions are normal and the instructions If conditions are normal and the instructions sh

showown n bebelow low arare e fofollllowoweded, , BaBakeker r MoModedel l “N“N-1-1”” Bridge Plugs are relatively

Bridge Plugs are relatively easy to drilleasy to drill up. The ma-up. The ma-terials used in this product must satisfy strict terials used in this product must satisfy strict qual-ity control specifications and are designed to break ity control specifications and are designed to break up into small pieces during the drilling-out up into small pieces during the drilling-out opera-tion.

tion.

It is nearly impossible to cover all the problems It is nearly impossible to cover all the problems tha

that t may may ariarise se undunder er eveevery ry conconditditionion; ; howhoweveever,r, there are certain procedures that can be followed there are certain procedures that can be followed in most instances. Thus the recommendations in most instances. Thus the recommendations list-ed below should be uslist-ed as a guide only and, ed below should be used as a guide only and, un-der conditions other than normal past experience der conditions other than normal past experience and common sense should govern the drilling-out and common sense should govern the drilling-out operation.

operation.

Suggeste

Suggested

d Rotary Operation

Rotary Operation

1.

1. A A BaBakeker r JuJunk nk BaBasksket et (P(Proroduduct ct FaFamimily ly NoNo.. H42802) should be installed in the drilling string H42802) should be installed in the drilling string in order to trap cuttings. This will serve two in order to trap cuttings. This will serve two pur-poses.

poses. a.

a. It will help to eliminatIt will help to eliminate the condition of con-e the condition of con-tinuin

tinuing to g to drill on drill on the same loose the same loose matermaterial.ial. b.

b. It It wilwill l tratrap p cutcuttintings gs thathat t migmight ht caucause se trotroublublee during subsequent operations in the well. during subsequent operations in the well. 2.

2. A A newnew, , highigh h qualqualityity, , medmedium hard ium hard forformatmationion rock bit with medium to short, regularly spaced rock bit with medium to short, regularly spaced te

teetethh susuchch ththee HuHugheghess WOWO shshououldld be be ususeded.. Se Se--lect a bit that will not “track,” and of a size that lect a bit that will not “track,” and of a size that wil

will l givgive e minminimuimum m cleclearaarance nce betbetweeween n the the bitbit and the casing. It is recommended that bits with and the casing. It is recommended that bits with “wings” between the outer teeth not be used. “wings” between the outer teeth not be used. 3.

3. CircuCirculating dowlating down the drill pipe or tubing will al-n the drill pipe or tubing will al-low larger pieces of the tool to be circulated up low larger pieces of the tool to be circulated up int

intoo the junk basthe junk basketket ratratherher thathan n revreversersee circirculculat- at-ing. This will

ing. This will usualusually result in ly result in fastfaster drill er drill out.out. 4.

4. WheWhen feelin feeling for the tool, try to avoing for the tool, try to avoid any d any im- im-pa

pactct whwhicichh mimighghtt brbreaeakk sosomeme ofof ththee teteetethh onon ththee bit. Experience has shown that rotary speeds bit. Experience has shown that rotary speeds between 50 and 75 rpm will give the best between 50 and 75 rpm will give the best re-sults under normal conditions.

sults under normal conditions. 5.

5. GraGraduadually set down 5,0lly set down 5,000 lbs on 00 lbs on the toothe tool l andand drill for 5-10 minutes. Drill up the mandrel which drill for 5-10 minutes. Drill up the mandrel which ex

extetendndss ababovovee ththee slslipipss anand allod allow thew the bibitt to seto seatat on

on the the fulfull l diadiametmeter. er. GraGraduadually lly incincrearease se sesett down weight to about 2,000 lbs per inch of bit down weight to about 2,000 lbs per inch of bit diameter. If the rate of penetration drops, diameter. If the rate of penetration drops, in-creased weight, or varying the speed should be creased weight, or varying the speed should be tried until the rate

tried until the rate of penetratiof penetration picks up.on picks up.

Conversion Procedures

The

The “Ba“Basic sic UniUnit” t” DraDrawinwing g NosNos. . 333333-82-825 5 andand

333-333-826 826 musmust t be be obtobtainained ed befbefore ore conconverversiosion n toto any one of

any one of the productthe products listed in s listed in the followithe following pag-ng

pag-8-2-00 8-2-00

(5)

es

es cacan n be be acaccocompmplilishsheded. . To To obobtatain in ththe e “B“Basasicic Unit,” disassemble the parts from the tool to be Unit,” disassemble the parts from the tool to be converted.

converted.

How To Obtain A “Basic Unit” From:

“K-1” Cement Retainer, Product Family Nos. “K-1” Cement Retainer, Product Family Nos. H40021

H40021, , H40022, H40023 and H40022, H40023 and H40024H40024 1.

1. LooseLoosen Set Screw in Set Screw in Guide. Set Sn Guide. Set Screw excrew extendstends through Body into the Guide on Sizes 6AA & through Body into the Guide on Sizes 6AA & larger.

larger. 2.

2. ReRemomove ve GuGuidide e anand d LowLower er SlSlip ip (S(Sizizes es 1A1AA- A-5AA). DO NOT DROP LOWER SLIP.

5AA). DO NOT DROP LOWER SLIP. a.

a. Use the Use the appapproprropriatiate e CemCement ent RetRetainainer er Ten Ten--sio

sion n ManMandredrel. l. InsInsert ert the the TenTensiosion n ManMandredrell into the Body. Strike the exposed end of the into the Body. Strike the exposed end of the Tension Mandrel with a hammer and block of Tension Mandrel with a hammer and block of

wood to push

wood to push the Latch Sleeve, Seal Spacerthe Latch Sleeve, Seal Spacer and Seal out of the Retainer.

and Seal out of the Retainer. b.

b. FoForr CeCemementnt ReRetataineinerr wiwithth FlFlapappeperr VaValvlve:e: Re Re--move Guide Assembly with Flapper Valve. move Guide Assembly with Flapper Valve. “N-1” Bridge Plug, Product Family No. H40120 “N-1” Bridge Plug, Product Family No. H40120 1.

1. LoLoososen en HeHex. x. SoSoc. c. SeSet t ScScrerew w anand d reremomoveve Guide.

Guide. 2.

2. RemovRemove “N” Bridgie “N” Bridging Plug, and for Sing Plug, and for Sizes 1AA-zes 1AA-5AA only, remove Belleville Washers.

5AA only, remove Belleville Washers. “NC-1” Bridge Plug, Product Family No. “NC-1” Bridge Plug, Product Family No. H40121

H40121 1.

1. ReRemomoveve HeHex.x. SoSoc.c. SetSet ScScrereww and and reremomove ve “N“NC- C-1” Type

1” Type BridgBridging Plug.ing Plug. 2.

2. LooLoosesen n HeHex x SocSockeket t SeSet t ScScrew rew anand d reremomoveve Guide and Belleville Washers.

Guide and Belleville Washers.

“Basic Unit”

“Basic Unit” Conversi

Conversion

on

Drawing No. 333-825, Sizes 1AA-5AA

Drawing No.

(6)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

To Convert To a “N-1” Wireline Set, Product Family No. H40120

Assembly Drawing No. 754-056

Use a

Use a “Basic Unit“Basic Unit” ” and parts listed below.and parts listed below. 1.

1. EnsurEnsure that the O-Ring is installed on the Bridging Plug. Lubrie that the O-Ring is installed on the Bridging Plug. Lubricate sealicate sealing end of ng end of BridgiBridging Plug andng Plug and slide into Body or Body Insert. Install Belleville Washers over end of Body (Sizes 1AA-5AA only). slide into Body or Body Insert. Install Belleville Washers over end of Body (Sizes 1AA-5AA only). 2.

2. ThreaThread Guide on Body until it shouldd Guide on Body until it shoulders againsers against Bridging Plut Bridging Plug.g. 3.

3. Align lug on BridginAlign lug on Bridging Plug: (A) with groove in Bridge Plug Guidg Plug: (A) with groove in Bridge Plug Guide or (B) e or (B) with any port in the Cemenwith any port in the Cementt Retainer Guide.

Retainer Guide. 4.

4. Make-Make-up Guide wrench tight. Lower Slip should also be tight and Belleville Washup Guide wrench tight. Lower Slip should also be tight and Belleville Washer (Sizes 1AA-5AA)er (Sizes 1AA-5AA) should not project past OD of Plug. If the Lower Slip is loose, install another Belleville Washer in the should not project past OD of Plug. If the Lower Slip is loose, install another Belleville Washer in the opposite direction from the first one. Install Hex Socket Set Screw.

opposite direction from the first one. Install Hex Socket Set Screw.

Parts List, Sizes 1AA - 11BB

Refer to Drawing No. 754-056. Refer to Drawing No. 754-056.

Item Item No.

No. DescriptionDescription

No. No. Req’d

Req’d 11AAA A 11BBB B 22AAA A 22BBB B 33AAA A 33BBB B 44AAA A 55AAAA 1

1 Wi Wirereliline ne UpUppeper r SlSlip ip 1 1 H0H07-7-545412121-1-00 00 H0H07-7-545412124-4-00 00 H0H07-7-545412127-7-00 00 H0H07-7-545413130-0-00 00 H0H07-7-595941411-1-00 H0700 H07-5-541413636-0-00 H070 H07-5-561610707-0-00 0 H0H07-7-565610108-8-0000 2

2 BBeelllleevviilllle e WWaasshheer r 11--22* * HH0011--8822557744--000 0 HH0011--8822558800--000 0 HH0011--8822558833--000 0 HH0011--8822558811--000 0 HH0011--8822558822--000 0 H0H011--8822660077--0000 3

3 BBrriiddggiinng g PlluPug g 1 1 HH0011--8822553355--003 3 HH0011--8822557766--0033 4

4 OO--RRiinng g ((FFoor r IItteem m 33) ) 1 1 RReef f HHWWWW--BB113311--HH440 0 HWHWWW--BB333311--HH4400 5

5 Bridge Bridge Plug Plug GuideGuide ∆ ∆ ₁₁ H03-44260-00H03-44260-00

H01-74796-01 H01-74796-01⊗⊗ H03-44250-00 H03-44250-00 H01-74797-01 H01-74797-01⊗⊗ H03-44256-00 H03-44256-00 H01-74798-01 H01-74798-01⊗⊗ H03-44258-00 H03-44258-00 H01-74799-01 H01-74799-01⊗⊗ H03-44262-00 H03-44262-00 H03-44261-00 H03-44261-00⊗⊗ H03-44259-00 H03-44259-00 H01-74801-01 H01-74801-01⊗⊗ H01-74802-01 H01-74802-01⊗⊗ H01-75862-01H01-75862-01⊗⊗ 6

6 Hex Hex Soc _{(For Item 5)}_{(For Item 5)}Soc Set Set ScrewScrew 11 _{(5/16 - 18 X 3/8 lg)}_{(5/16 - 18 X 3/8 lg)}HWW-G51B-0D0HWW-G51B-0D0 7

7 RReelleeaasse e SSttuud d 1 1 HH0011--3355667722--000 0 ((3333,,00000 0 llbbss) ) 77//88" " HH0011--3344115522--000 0 ((5555,,00000 0 llbbss) ) 11"" Item

Item No.

No. No. Req’d

Req’d 66AAA A 66BBB B 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB 1

1 WirWirelieline ne UppUpper er SliSlip p 1 1 H07-55H07-55984984-00 -00 H07H07-56-56763763-00 -00 H07H07-56-56109109-00 -00 H07H07-58-58424424-00 -00 H07H07-56-5622227-07-00 0 H07H07-58-58590590-00 -00 H07H07-56-56110110-00 -00 H07H07-58-5887878-08-00 0 H07H07-58-58877877-00-00 2

2 BBeelllleevviilllle e WWaasshheer r - - NNoot t RReeqquuiirreedd 3

3 BBrriiddggiinng g PPlluug g 1 1 HH0011--8822557766--0033 4

4 OO--RRiinng g ((FFoor r IItteem m 33) ) 1 R1 Reef f HHWWWW--BB333311--HH4400 5

5 Bridge Bridge Plug Plug GuideGuide ∆ ∆ 11 H02-07892-00H02-07892-00 H02-07830-01 H02-07830-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ 6

6 Hex Soc _{(For Item 5)}_{(For Item 5)}Hex Soc Set Set ScrewScrew 11 _{(1/2-13 X 1-1/2 lg)}_{(1/2-13 X 1-1/2 lg)}HWW-G51H-1H0HWW-G51H-1H0 HWW-G51H-100HWW-G51H-100_{(1/2-13 X 1 lg)}_{(1/2-13 X 1 lg)} 7

7 RReelleeaasse e SSttuud d 1 1 HH0011--334411552 2 ((5555,,00000 0 llbbss) ) 11"" * Install sufficient number to take up slack.

* Install sufficient number to take up slack.

∆

∆ If Bridge Plug Guide is not available, a Cement Retainer Guide may be used. If Bridge Plug Guide is not available, a Cement Retainer Guide may be used.

⊗

⊗ Cement Retainer Guide. Cement Retainer Guide.

8-2-00 8-2-00

(7)

To Convert to a “NC-1” Bridge Plug Wireline Bridge Plug, Gas Well Type,

Product Family No. H40121

Assembly Drawing No. 999-601

Use “Basic Unit” and Parts Listed below. Use “Basic Unit” and Parts Listed below.

NOTE:

NOTE: Be sure that the corre Be sure that the correct Wireline Uppct Wireline Upperer Slip (1)Slip (1) is used.is used. Refer to PartRefer to Parts List for Maters List for Material Numberial Number. A shear Ring. A shear Ring is shipped with

is shipped with each “NC-1” Plug.each “NC-1” Plug.

1.

1. Thread GuiThread Guide on Body and tighten Set Screde on Body and tighten Set Screw. Lower Slip show. Lower Slip should be tight.uld be tight. 2.

2. InstInstall Model “NC-all Model “NC-1” type Bridgi1” type Bridging Plug with O-Rinng Plug with O-Ring into the TOP END of body.g into the TOP END of body. 3.

3. Align tappAlign tapped hole in Body with a hole in the “NC-1” Bridgied hole in Body with a hole in the “NC-1” Bridging Plug. Instng Plug. Install Hex Soc Set Screwall Hex Soc Set Screw..

Parts List, Sizes 1AA - 11BB

Item Item No.

No. DescriptionDescription No. No. Req’d

1 Wi Wirereliline ne UpUppeper r SlSlip ip 1 1 H0H07-7-545412121-1-00 00 H0H07-7-545412124-4-00 00 H0H07-7-545412127-7-00 00 H0H07-7-545413130-0-00 00 H0H07-7-595941411-1-00 00 H0H07-7-545413136-6-00 H07-00 H07-565610107-7-00 00 H0H07-7-565610108-8-0000 2

2 NNCC--1 1 BBrriiddggiinng g PPlluug g 1 1 HH0011--7744669999--000 0 HH0077--5577449900--0000 3

3 OO--RRiinng g ((FFoor r IItteemm22) ) 1 1 RReef f HHWWWW--BB221155--HH440 0 HWHWWW--BB222244--HH4400 4

4 Bridge Bridge Plug Plug GuideGuide ∆ ∆ 11 _H01-74796-01_H01-74796-01H03-44260-00H03-44260-00_⊗_⊗ _H01-74797-01_H01-74797-01H03-44250-00H03-44250-00_⊗_⊗ _H01-74798-01_H01-74798-01H03-44256-00H03-44256-00_⊗_⊗_H01-74799-01_H01-74799-01H03-44258-00H03-44258-00_⊗_⊗_H03-44261-00_H03-44261-00H03-44262-00H03-44262-00_⊗_⊗_H01-74801-01_H01-74801-01H03-44259-00H03-44259-00_⊗_⊗ H01-74802-01 H01-74802-01⊗⊗ H01-75862-01H01-75862-01⊗⊗

5

5 Hex Hex Soc Soc Set Set ScrewScrew (For Item 4) (For Item 4) 11 HWW-G51B-0D0 HWW-G51B-0D0 (5/16 - 18 X 3/8 lg) (5/16 - 18 X 3/8 lg) 6 6 SShheeaar r RRiinng g 1 1 HH0011--7744772255--000 0 ((3300,,00000 0 llbbss) ) HH0011--7755776699--000 0 ((5500,,00000 0 llbbss)) Item Item No.

No. DescriptionDescription No. No. Req’d

1 WirWirelieline ne UppUpper er SliSlip p 1 1 H07H07-55-55984984-00 -00 H07H07-56-56763763-00 -00 H07H07-56-56109109-00 -00 H07H07-58-58424424-00 -00 H07H07-56-56227227-0-00 0 H07H07-56-56764764-00 -00 H07H07-56-5611110-00-00 0 H07H07-58-58878878-00 -00 H07H07-58-58877877-00-00 2

2 NNCC--11BBrriiddggiinng g PPlluug g 1 1 HH0077--5577449911--0000 3

3 OO--RRiinng g ((FFoor r IItteem m 22) ) 1 1 RReef f HHWWWW--BB222244--HH4400 4

4 Bridge Bridge Plug Plug GuideGuide ∆ ∆ 11 H02-07892-00H02-07892-00 H02-07830-01 H02-07830-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ 5

5 Hex Hex Soc _{(For Item 4)}_{(For Item 4)}Soc Set Set ScrewScrew 11 HWW-G51H-1H0 HWW-G51H-1H0_{(1/2-13 X 1-1/2 lg)}_{(1/2-13 X 1-1/2 lg)} HWW-G51H-100HWW-G51H-100_{(1/2-13 X 1 lg)}_{(1/2-13 X 1 lg)} 6

6 SShheeaar r RRiinng g 1 1 HH0011--7755776699--000 0 ((5500,,00000 0 llbbss))

∆

⊗

(8)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

To Convert to a “N-1” Mechanical Bridge Plug, Product Family No. H40122

Assembly Drawing No. 333-829

Use a

Use a “Basic Unit“Basic Unit” ” and Parts Listed below.and Parts Listed below. 1.

1. EnsurEnsure that the O-Rine that the O-Ring is installeg is installed on the Bridge Plug. Lubrd on the Bridge Plug. Lubricate seaicate sealing end ofling end of BridginBridging Plug and slideg Plug and slide into Body or Body Insert. Install Belleville Washers over end of Body. (Sizes 1AA-5AA only)

into Body or Body Insert. Install Belleville Washers over end of Body. (Sizes 1AA-5AA only) 2.

2. ThreaThread Guide on Body until it shouldd Guide on Body until it shoulders againsers against Bridging Plut Bridging Plug.g. 3.

3. Align lug on BridginAlign lug on Bridging Guide: (A) with groove in Bridgg Guide: (A) with groove in Bridging Plug Guide or (B) with any port in the Cementing Plug Guide or (B) with any port in the Cement Retainer Guide.

Retainer Guide. 4.

4. Make-Make-up Guide wrench tight (Lower Slip shouup Guide wrench tight (Lower Slip should also be ld also be tight and Bellevitight and Belleville Washer (Sizelle Washer (Sizes 1AA-5AA)s 1AA-5AA) shoul

should not d not projeproject past OD ct past OD of Plug). Install Hex Socket Set of Plug). Install Hex Socket Set ScrewScrew..

Parts List, Sizes 1AA - 11BB

Item Item No.

No. DDeessccrriippttiioon n NNoo. . RReeqq’’d d 11AAA A 11BBB B 22AAA A 22BBB B 33AAA A 33BBB B 44AAA A 55AAAA 1 1 Mechanical Mechanical Upper Slip Upper Slip 1 1 H07H07-54-54160160-00 -00 H07H07-54-54161161-00 -00 H07H07-54-54162162-00 -00 H07H07-54-54163163-00 -00 H07H07-54-54164164-00 -00 H07H07-5-54164165-5-00 00 H07H07-54-54166166-00 -00 H07H07-54-54167167-00-00 2 2 BBeelllleev iv illlle e WWaasshheer r 1 1 - - 22* * HH0011--8822557744--000 0 HH0011--8822558800--000 0 HH0011--8822558833--000 0 H0H011--8822558811--000 0 H0H011--8822558822--000 0 HH0011--8822660077--0000 3

3 BBrriiddggiinng g PlluPug g 1 1 HH0011--8822553355--003 3 HH0011--8822557766--0033 4

4 OO--RRiinng g ((FFoorr IItteemm 33) ) 1 1 RReef f HHWWWW--BB113311--HH440 0 HHWWWW--BB333311--HH4400 5

5 Bridge Bridge PlugPlug Guide Guide∆∆ 11 H03-44260-00 H03-44260-00 H01-74796-01 H01-74796-01⊗⊗ H03-44250-00 H03-44250-00 H01-74797-01 H01-74797-01⊗⊗ H03-44256-00 H03-44256-00 H01-74798-01 H01-74798-01⊗⊗ H03-44258-00 H03-44258-00 H01-74799-01 H01-74799-01⊗⊗ H03-44262-00 H03-44262-00 H03-44261-00 H03-44261-00⊗⊗ H03-44259-00 H03-44259-00 H01-74801-01 H01-74801-01⊗⊗ H01-74802-01 H01-74802-01⊗⊗ H01-75862-01H01-75862-01⊗⊗ 6

6 Hex. Hex. Soc _{(For Item 5)}_{(For Item 5)}Soc ScrewScrew 11 _{(5/16 - 18 x 3/8 lg)}_{(5/16 - 18 x 3/8 lg)}HWW-G51B-0D0HWW-G51B-0D0 Item

Item No.

No. DDeessccrriippttiioon n NNoo. . RReeqq’’d d 66AAA A 66BBB B 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB 1

1 Mechanical Mechanical_{Upper Slip}_{Upper Slip} 1 1 H07H07-54-54168168-00 -00 H07H07-54-54169169-00 H07--00 H07-54154170-70-00 00 H07H07-58-58418418-00 H07--00 H07-54154171-71-00 H07-500 H07-54174172-2-00 00 H07H07-54-54173173-00 H0-00 H07-57-58908903-03-00 H00 H07-57-58908904-04-000 2

2 BBeelllleevviilllle e WWaasshheer r - - NNoot t rreeqquuiirreedd 3

3 BBrriiddggiinng g PPlluug g 1 1 HH0011--8822557766--0033 4

4 OO--RRiinng g ((FFoorr IItteemm 33) ) 1 1 RReef f HHWWWW--BB333311--HH4400 5

5 Bridge Bridge PlugPlug Guide Guide∆∆ 11 H02-07892-00 H02-07892-00 H02-07830-01 H02-07830-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ 6

6 Hex. Hex. Soc Soc ScrewScrew (For Item 5) (For Item 5) 11 HWW-G51H-1H0 1H0 (1/2-13 x 1-1/2 (1/2-13 x 1-1/2 lg) lg) HWW-G51H-100 HWW-G51H-100 (1/2 - 13 x 1 lg) (1/2 - 13 x 1 lg) * Install sufficient number to take up slack.

* Install sufficient number to take up slack.

∆

⊗

⊗_{Cement Retainer Guide}_{Cement Retainer Guide}

8-2-00 8-2-00

(9)

To Convert to a “NC-1” Bridge Plug Mechanical Bridge Plug, Gas Well Type,

Product Family No. H40123

Assembly Drawing No. 999-602

Use “Basic Unit” and Parts Listed below. Use “Basic Unit” and Parts Listed below.

NOTE:

NOTE: Be sure that the correct Mechanical Upper Slip (1) is used. Refer to Parts List for Material Number. A shear Be sure that the correct Mechanical Upper Slip (1) is used. Refer to Parts List for Material Number. A shear Ring is shipped with each “NC-1” Plug.

Ring is shipped with each “NC-1” Plug.

1.

1. Thread GuiThread Guide on Body and tighten Set Screde on Body and tighten Set Screw. Lower Slip show. Lower Slip should be tight.uld be tight. 2.

2. InstInstall Model “NC-all Model “NC-1” type Bridgi1” type Bridging Plug with O-Rinng Plug with O-Ring into the TOP END of body.g into the TOP END of body. 3.

3. Align tappAlign tapped hole in Body with a hole in the “NC-1” Bridgied hole in Body with a hole in the “NC-1” Bridging Plug. Instng Plug. Install Hex. Socall Hex. Soc. Set Screw.. Set Screw.

Parts List, Sizes 1AA - 11BB

Item Item No.

No. No. Req’d

1 Mechanical Mechanical_{Upper Slip}_{Upper Slip} 1 1 H07H07-54-54160160-00 -00 H07H07-54-54161161-00 -00 H07H07-54-54162162-00 -00 H07H07-5-54164163-03-00 0 H07H07-54-54164164-00 -00 H07H07-54-54165165-00 -00 H07H07-54-54166166-00 -00 H07H07-54-5416167-07-000 2

2 NNCC--1 1 BBrriiddggiinng g PPlluug g 1 1 HH0011--7744669999--000 0 HH0077--5577449900--0000 3

3 OO--RRiinng g ((FFoor r IItteemm22) ) 1 1 RReef f HHWWWW--BB221155--HH440 0 HWHWWW--BB222244--HH4400 4

4 Bridge Bridge Plug Plug GuideGuide ∆ ∆ 11 H03-44260-00H03-44260-00 H01-74796-01 H01-74796-01⊗⊗ H03-44250-00 H03-44250-00 H01-74797-01 H01-74797-01⊗⊗ H03-44256-00 H03-44256-00 H01-74798-01 H01-74798-01⊗⊗ H03-44258-00 H03-44258-00 H01-74799-01 H01-74799-01⊗⊗ H03-44262-00 H03-44262-00 H03-44261-00 H03-44261-00⊗⊗ H03-44259-00 H03-44259-00 H01-74801-01 H01-74801-01⊗⊗ H01-74802-01 H01-74802-01⊗⊗ H01-75862-01H01-75862-01⊗⊗ 5

5 Hex Soc _{(For Item 4)}_{(For Item 4)}Hex Soc Set Set ScrewScrew 11 _{(5/16 - 18 X 3/8 lg)}_{(5/16 - 18 X 3/8 lg)}HWW-G51B-0D0HWW-G51B-0D0 HWW-G51B-0S0HWW-G51B-0S0_{(5/16-18 x 3/4 lg)}_{(5/16-18 x 3/4 lg)} Item

Item No.

No. No. Req’d

1 WirWirelieline ne UppUpper er SliSlip p 1 1 H07H07-54-54168168-00 -00 H07H07-54-54169169-00 -00 H07H07-5-54174170-00-00 0 H07H07-5-58418418-08-00 0 H07H07-54-54171171-00 -00 H07H07-54-54172172-00 -00 H07H07-54-54173173-00 -00 H07H07-58-5890903-03-000 H07H07-58-58904904-00-00 2

2 NNCC--11BBrriiddggiinng g PPlluug g 1 1 HH0077--5577449911--0000 3

3 OO--RRiinng g ((FFoor r IItteem m 22) ) 1 R1 Reef f HHWWWW--BB222244--HH4400 4

4 Bridge Bridge Plug Plug GuideGuide ∆ ∆ 11 H02-07892-00H02-07892-00 H02-07830-01 H02-07830-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ H01-75852-00 H01-75852-00 H01-74804-01 H01-74804-01⊗⊗ 5

5 Hex Hex Soc _{(For Item 4)}_{(For Item 4)}Soc Set Set ScrewScrew 11 HWW-G51H-1H0 HWW-G51H-1H0_{(1/2-13 X 1-1/2 lg)}_{(1/2-13 X 1-1/2 lg)} HWW-G51H-100HWW-G51H-100_{(1/2-13 X 1 lg)}_{(1/2-13 X 1 lg)}

∆

⊗

(10)

Index: 304.00 Page 10 oPage 10 of 16f 16

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Dimensional Data Drawing No. 333-828, Sizes 1AA - 5AA

Dimensional Data Drawing No. 760-578, Sizes 6AA - 11BB

Dimensional Data, Sizes 1AA - 11BB

Refer to Drawing Nos. 333-828, Sizes 1AA - 5AA and 760-578, Sizes 6AA - 11BB. Refer to Drawing Nos. 333-828, Sizes 1AA - 5AA and 760-578, Sizes 6AA - 11BB.

D Diim m 11AAA A 11BBB B 22AAA A 22BBB B 33AAA A 33BBB B 4A4AA A 55AAA A 66AAA A 66BBB B 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB A A 3.3.59593 3 33.9.937 37 4.4.33112 2 44.9.9337 7 55.4.410 10 5.5.66887 7 66.3.3112 2 7.17.125 25 8.8.11225 5 99.0.0000 0 99.4.438 38 9.9.99337 7 110.0.4437 1137 11.5.562 1262 12.0.000 1300 13.9.900 1400 14.5.57070 B B 3.3.50500 0 33.8.812 12 4.4.22665 5 44.8.8112 2 55.3.370 70 5.5.66225 5 66.1.1887 7 7.07.062 62 8.8.00000 0 88.8.8880 0 99.3.312 12 9.9.88112 2 110.0.3317 1117 11.5.500 1100 11.8.875 1375 13.7.775 1475 14.4.46262 C C 3.3.51515 5 33.8.812 12 4.4.22118 8 44.8.8112 2 55.2.250 50 5.5.66225 5 66.1.1887 7 7.07.062 62 8.8.00000 0 88.8.8775 5 99.3.312 12 9.9.88110 0 110.0.3312 1112 11.5.500 1100 11.8.875 1375 13.7.770 1470 14.4.46060 D D 3.3.59593 3 33.9.937 37 4.4.33112 2 44.9.9337 7 55.4.410 10 5.5.66887 7 66.3.3112 2 7.17.125 25 8.8.11225 5 99.0.0000 0 99.4.438 38 9.9.99337 7 110.0.4437 1137 11.5.562 1262 12.0.000 1300 13.9.900 1400 14.5.57070 E E 3.3.48484 4 33.8.812 12 4.4.22550 0 44.8.8112 2 55.2.250 50 5.5.66225 5 66.1.1887 7 7.07.062 62 8.8.00000 0 88.8.8775 5 99.3.312 12 9.9.88004 4 110.0.3312 1112 11.5.500 1100 11.8.875 1375 13.7.775 1475 14.4.46262 F F 3.3.59594 4 33.9.937 37 4.4.33112 2 44.9.9337 7 55.4.410 10 5.5.66887 7 66.3.3112 2 7.17.125 25 8.8.11229 9 99.0.0000 0 99.4.437 37 9.9.99337 7 110.0.4437 1137 11.5.562 1262 12.0.000 1300 13.9.900 1400 14.5.57070 G G 11..334455 22..000000 H H 22..55000 0 22..66225 5 22..88775 5 33..77550 0 44..33775 5 66..22448 8 77..33775 5 88..22550 0 99..66225 5 1122..000000 J J 22..66225 5 22..77550 0 33..00000 0 33..99337 7 44..66225 5 66..33775 5 77..55000 0 88..33775 5 99..77550 0 1122..225500 K K 00..559 9 00..447 7 0..707660 0 11..22770 0 11..22330 0 11..55331 1 11..33000 0 11..22550 0 11..337755 L L 33..66330 0 33..33110 0 44..11225 5 44..66556 6 44..33775 5 44..66556 6 44..66225 5 44..66887 7 44..772200 M M 99..11990 0 99..22880 0 1100..00993 3 1100..66225 5 1100..667700 N N 1122..55990 0 1133..66660 0 1166..11887 7 1166..33443 3 1166..22550 0 1616..99337 7 1177..228800 P P 1177..33440 0 1177..44770 0 1177..11553 3 1177..55990 0 1188..55335 5 2211..44666 6 2211..11991 1 2211..00662 2 2211..22118 8 2121..11225 5 2211..88112 2 2222..115555 P P♦♦ 1199..55662 2 1199..66444 4 1199..55446 6 2211..44222 2 2211..44006 6 2211..22996 6 2222..33550 0 2222..88660 0 2222..88550 0 2222..887755 ♦

♦ Overall Length with Cement Retainer Guide Non-Threaded. (Not Shown) Overall Length with Cement Retainer Guide Non-Threaded. (Not Shown)

8-2-00 8-2-00

(11)

Assembly

Wireline Adapter Kits For “N-1” Wireline

Bridge Plugs, Product Family No. H40120

Use the appropriate size Baker Wireline Adapter Use the appropriate size Baker Wireline Adapter Kit, Product Family No. H43824 to make up the Kit, Product Family No. H43824 to make up the Br

Brididge ge PlPlug ug to to ththe e BaBakeker r MoModedel l “E“E-4” -4” WiWirerelilinene Pressure Setting Assembly.

Pressure Setting Assembly. 1.

1. ThThreread ad ReReleleasase e StStud ud ininto to TeTensnsioion n MaMandndrerell (tight).

(tight). 2.

2. MaMake ke up up ReReleleasase e StStud ud ininto to BrBrididgiging ng PlPlugug (tight).

(tight). 3.

3. InstInstall Tensiall Tension Mandreon Mandrel Lock Spril Lock Spring.ng.

Warning Warning

Lock Spring must be used to prevent Tool Lock Spring must be used to prevent Tool from backing off WLPSA.

from backing off WLPSA. 4.

4. InstInstall Adjusall Adjuster Sub and Settter Sub and Setting Sleeve (Ning Sleeve (No. 20o. 20 WLPSA) and Setting Sleeve only (No. 10 WLPSA) and Setting Sleeve only (No. 10 WLP-SA) on Model “E-4” WLPSA. Slide Wireline SA) on Model “E-4” WLPSA. Slide Wireline Up-pe

per r SlSlip ip ononto to cocone ne tatapeper r anand d alaligign n TeTensnsioionn mandrel with Adjuster Sub (No. 20 WLPSA) or mandrel with Adjuster Sub (No. 20 WLPSA) or Setting Mandrel (No. 10 WLPSA).

Setting Mandrel (No. 10 WLPSA). 5.

5. MakMake up e up by hand untiby hand until l gap betwgap between cyleen cylindeinderr head and cross link sleeve closes.

head and cross link sleeve closes.

NOTE

NOTE: Do not wrench.: Do not wrench.

6.

6. Tool is shiTool is shipped with mepped with metal band aroutal band around Lowernd Lower Slip for protection. It must be removed before Slip for protection. It must be removed before running.

running. 7.

7. ProProceeceed d witwith h opeoperatrating ing and and disdisassassembembly ly inin-structions. (See unit on WLPSA.)

structions. (See unit on WLPSA.)

Drawin

(12)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Wireline Adapter Kit For “N-1” Bridge Plug, Product Family No. H43824

Parts List, Sizes 1AA - 6BB

Item Item No.

No. No. Req’d Req’d

Size and Material No. Size and Material No. 1 1AAA A 11BBBB--22AAA A 22BBB B 33AAAA--33BBB B 44AAA A 55AAAA--55BBB B 66AAA A 66BBBB 1 1 StubStub Sleeve Bushing Sleeve Bushing 11 NNoottUUsseedd HH0011--2200886600--0000 2

2 SeSettttining g SlSleeeeve ve 1 1 H0H01-1-515141415-5-00 00 H0H01-1-222288884-4-00 00 H0H01-1-747419190-0-00 00 H0H01-1-848470708-8-00 00 H0H01-1-737326266-6-00 00 H0H01-1-373727270-0-00 00 H0H01-1-737310103-3-00 00 H0H01-1-838378785-5-0000 3

3 AAddjjuussttoor r SSuub b 1 1 NNoot t UUsseed d HH0011--3311225544--000 0 HH0011--3311225544--0000 4

4 Tension Tension MandrelMandrel Lock Spring

Lock Spring 1 1 HH0011--3355770077--000 0 HH0011--3311226688--000 0 HH0011--3311226688--0000 5

5 TTeennssiioon n MMaannddrreel l 1 1 HH0011--4466556611--000 0 HH0011--2222444477--000 0 HH0011--2233555544--0000 -- Hex Hex SocSoc

Screw Wrench

Screw Wrench 11 33//88HHeexx

-- MaMateteririal al NoNos.s.* * - - H4H43838-2-24-4-131300 00 H4H43838-2-24-4-232300 00 H4H43838-2-24-4-252500 00 H4H43838-2-24-4-333300 00 H4H43838-2-24-4-434300 00 H4H43838-2-24-4-535300 00 H4H43838-2-24-4-636300 00 H4H43838-2-24-4-65650000 *H01-37269-00 Usable On Size 3BB No Longer Manufactured.

*H01-37269-00 Usable On Size 3BB No Longer Manufactured.

Wireline Adapter Kit For “N-1” Bridge Plug, Product Family No. H43824

Parts List, Sizes 7AA - 11BB

Item Item No.

No. No. Req’d

Req’d 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB 1

1 SSttuub b SSlleeeevve e BBuusshhiinng g 1 1 HH0011--2200886600--0000 2

2 SeSettitting ng SlSleeeeve ve 1 1 H0H01-1-747403037-7-00 00 H0H07-57-584846262-0-00 0 H0H01-1-747410100-0-00 00 H0H07-7-505021218-08-00 0 H0H01-1-737395959-9-00 00 H0H07-7-585891917-7-00 00 H0H07-7-585891918-8-0000 3

3 AAddjjuussttoor r SSuub b 1 1 HH0011--3311225544--0000 4

4 Tension Tension Mandrel_{Lock Spring}_{Lock Spring}Mandrel 11 H0H011--3311226688--0000 5

5 TTeennssiioon n MMaannddrreel l 1 1 HH0011--2233555544--0000 -- HHeex x SSooc c SSccrreew w WWrreenncch h 1 1 33//8 8 HHeexx

-- MaMateteririal al NoNos.s.* * - - H4H43838-2-24-4-737300 00 H4H43838-2-24-4-757500 00 H4H43838-2-24-4-838300 00 H4H43838-2-24-4-858500 00 H4H43838-2-24-4-939300 00 H4H43838-2-24-4-B3B300 00 H4H43838-2-24-4-B5B50000 * H01-37269-00 Usable On Size 3BB No Longer Manufactured.

* H01-37269-00 Usable On Size 3BB No Longer Manufactured.

Wireline Adapter Kit For “N-1” Bridge Plug, Product Family No. H43824

Dimensional Data, Sizes 1AA - 11BB

Refer to Drawing No. 753-767. Refer to Drawing No. 753-767. D Diim m 11AAAA 1BB- 1BB-2AA 2AA 2BB2BB 3AA-3BB 3BB 4 4AAA A 55AAA A 66AAA A 66BBB B 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB A A 33. 5. 5000 0 33. 8. 8112 2 44. 9. 9338 8 5 .35 .3775 5 6 .6 .33112 2 7 .7 .00000 0 8 .8 .00000 0 88..88775 5 99..44338 8 99..99330 0 1100. 4. 4338 1 18 1 1. 5. 5000 1 10 1 1. 7. 7550 1 30 1 3. 9. 9000 1 40 1 4. 5. 57700 B B 3..030000 0 44..00000 0 44..66770 0 55..00000 0 66..33775 5 66..99884 4 77..66888 8 99..22550 0 99..77550 0 1010..88775 5 1133..11220 0 1133..880000 C C 1122..88000 10 122..55000 10 122..00660 10 100..55000 0 99..55660 0 99..11220 0 99..66660 0 99..66990 0 99..99337 7 99..99440 0 1100..11225 15 100..11660 0 99..44337 7 99..331122 D D 11..000000 11..112255 E E 11..118888 11..220033 11..444477 G G 2200..119900 1188..000000 H H 33..550000 99..887755 8-2-00 8-2-00

(13)

Assembly and Dimensional Data Drawing No. 753-767

(14)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Wireline Adapter Kits For “NC-1” Wireline

Bridge Plug, Product Family No. H40021

Refer to Drawing No. 754-055-2 Refer to Drawing No. 754-055-2

Use the appropriate size Baker Wireline Adapter Use the appropriate size Baker Wireline Adapter Kit (Product Family No. H43825) to make up the Kit (Product Family No. H43825) to make up the Br

Brididge ge PlPlug ug to to ththe e BaBakeker r MoModel del “E“E-4-4” ” WiWirerelilinene Pressure Setting Assembly.

Pressure Setting Assembly. 1.

1. RemovRemove Lock Nut fre Lock Nut from Shear Maom Shear Mandrel and slndrel and slipip Shear Ring over Shear Mandrel with SHEAR Shear Ring over Shear Mandrel with SHEAR FLANGE DOWN. Insert Shear Mandrel into top FLANGE DOWN. Insert Shear Mandrel into top end of Bridge Plug Body and let it rest in the end of Bridge Plug Body and let it rest in the bevel of the hole.

bevel of the hole. 2.

2. WiWith Sheath Shear r RiRing ng rereststining g in in bevbevel el of of hohole le inin Body, slip Installation Tool over Shear mandrel Body, slip Installation Tool over Shear mandrel 3.

3. WitWith h InsInstaltallatlation Tool ion Tool resrestiting ng on on SheShear ar RinRing,g, strike it a medium blow with a hammer to strike it a medium blow with a hammer to col-la

lapspse e ththe e ShSheaear r RiRing ng anand d foforcrce e it it ininto to ititss groove.

groove. 4.

4. Pull up on Shear RinPull up on Shear Ring to locate sheg to locate shear shouldar shoulderer of Mandrel against Shear Ring. The topface of of Mandrel against Shear Ring. The topface of the upset end of the Shear mandrel should now the upset end of the Shear mandrel should now

be just above the top edge of the Shear Ring. be just above the top edge of the Shear Ring. This indicates the Shear Ring is correctly This indicates the Shear Ring is correctly in-stalled.Thread Lock Nut onto Shear Mandrel. stalled.Thread Lock Nut onto Shear Mandrel. Insert screwdriver in slot at top of Shear Insert screwdriver in slot at top of Shear Man-drel, and hold to prevent rotation and tighten drel, and hold to prevent rotation and tighten Lock Nut until it

Lock Nut until it shouldshoulders against top of ers against top of Body.Body. 5.

5. All or part of the grooAll or part of the groove in the Shear Mave in the Shear Mandrndrelel should be visible above the Lock

should be visible above the Lock Nut to ensureNut to ensure that the shear shoulder is seated against the that the shear shoulder is seated against the Shear Ring. The Lock Nut will lock the Shear Shear Ring. The Lock Nut will lock the Shear Mandrel to the plug rotationally to allow making Mandrel to the plug rotationally to allow making the Plug up on the Wire Line Pressure Setting the Plug up on the Wire Line Pressure Setting Assembly.

Assembly.

Warning Warning Do not

Do not use ause a wrenwrench to makch to make up Bridge up Bridge Pluge Plug on

on ththe e WLWLPSPSA. A. ththis is cocoululd d shsheaear r ththe e totopp Slips when made up too tight. If, at any time Slips when made up too tight. If, at any time after the Shear Ring has been installed in after the Shear Ring has been installed in the shear groove it is decided not to run the the shear groove it is decided not to run the Br

Brididge ge PlPlugug, , ththe e ShSheaear r MaMandndrerel l cacan n bebe removed by prying the Shear Ring out of its removed by prying the Shear Ring out of its groove with a screwdriver.

groove with a screwdriver.

8-2-00 8-2-00

Assembl

(15)

Wireline Adapter Kit For “NC-1” Bridge Plug

Parts List, Sizes 1AA - 6AA

Item Item No.

No. No. Req'd

Req'd 11AAA A 11BBBB--22BBB B 22BBB B 3A3AAA--33BBB B 44AAA A 55AAA A 66AAAA 1

1 Extension Extension_Sleeve_Sleeve 1 1 NNoot t UUsseed d HH0011--7744773355--0000 2

2 AAddjjuussttoor r SSuubb* * 1 1 NNoot t UUsseed d HH0011--3311225544--0000 3

3 Hex Hex Soc_{Set Screw*}_{Set Screw*}Soc 1 1 NNoot t UUsseed d HWHWWW--GG5511DD--00DD0 0 ((33//88--116 6 x x 33//8 8 llgg)) 4

4 SeSettitting ng SlSleeeeveve* * 1 1 H0H01-1-515141415-5-00 00 H0H01-1-222288884-4-00 00 H0H01-1-747419190-0-00 00 H0H01-1-848470708-8-00 00 H0H01-1-737326266-6-00 00 H0H01-1-373727270-0-00 00 H0H01-1-737310103-3-0000 5

5 Tension Tension_Mandrel_Mandrel 1 1 HH0011--7744774455--000 0 HH0011--7744773344--0000 6 6 Tension Tension Mandrel Mandrel Lock Spring* Lock Spring* 1 1 HH0011--3355770077--000 0 HH0011--3311226688--0000 7 7 LLoocck k NNuut t 1 1 HH0011--7744775500--000 0 HH0011--7744775511--0000 8 8 SShheeaar r RRiinngg*** * 1 1 HH0011--7744772255--000 0 ((3300,,00000 0 LLbbss) ) HH0011--7755776699--000 0 ((5500,,00000 0 LLbbss)) 9

9 IInnssttaallllaattiioon n TTooooll***** * - - HH0011--8822009922--0000

-- MMaatteerriiaal l NNoo. . - - HH443388--2255--1133000 0 HH443388--2255--2233000 0 HH443388--2255--2255000 0 HH443388--2255--3377000 0 - - - - --* Components common to WLAK H43824 & H43819

* Components common to WLAK H43824 & H43819 ** Packaged with Bridge Plug

** Packaged with Bridge Plug *** Available when ordered separately *** Available when ordered separately

Wireline Adapter Kit For “NC-1” Bridge Plug

Parts List, Sizes 6BB - 11BB

Item Item No.

No. No. Req'd

Req'd 66BBB B 77AAA A 77BBB B 88AAA A 88BBB B 99AAA A 1111AAA A 1111BBBB 1

1 EExxtteennssiioon n SSlleeeevve e 1 1 HH0011--7744773355--0000 2

2 AAddjjuusstteer r SSuubb* * 1 1 HH0011--3311225544--0000 3

3 HHeex x SSooc c SSeet t SSccrreeww* * 1 1 HHWWWW--GG5511DD--00DD0 0 ((33//88--116 6 x x 33//8 8 llgg)) 4

4 SetSettinting g SleSleeveve* e* 1 1 H01-8H01-83783785-00 5-00 H01H01-74-74037037-00 -00 H07H07-58-58462462-00 -00 H0H01-71-74104100-00-00 0 H0H07-57-50210218-08-00 0 H0H01-71-73953959-09-00 0 H07H07-58-58917917-00 -00 H07H07-58-58918918-00-00 5

5 TTeennssiioon n MMaannddrreel l 1 1 HH0011--7744773344--0000 6

6 TensionMandrelLock TensionMandrelLock_Spring*_Spring* 11 HH0011--3311226688--0000 7

7 LLoocck k NNuut t 1 1 HH0011--7744775511--0000 8

8 SShheeaar r RRiinngg*** * 1 1 HH0011--7755776699--000 0 ((5500,,00000 0 LLbbss)) 9

9 IInnssttaallllaattiioon n TTooooll***** * - - HH0011--8822009922--0000 -- Stub Stub Sleeve _{(Not Shown)*}_{(Not Shown)*}Sleeve BushingBushing 11 H0H011--2200886600--0000 -- MMaatteerriiaallNNoo.. -- --* Components common to WLAK 438-24 & 438-19

* Components common to WLAK 438-24 & 438-19 ** Packaged with Bridge Plug

** Packaged with Bridge Plug *** Available when ordered separately *** Available when ordered separately

Wireline Adapter Kit For “NC-1” Bridge Plug

Dimensional Data, Sizes 1AA - 11BB

D Diim m 11AAAA 1BB- 1BB-2AA 2AA 2BB2BB 3AA- 3AA-3BB 3BB 44AAA A 55AAA A 66AAA A 66BBB B 77AAA A 7B7BB B 88AAA A 88BBB B 9A9AA A 1111AAA A 1111BBBB A A -- 77..444400 B B -- 88..775500 C C 1122..88000 0 1122..55000 0 1122..00660 0 1100..55000 0 99..55660 0 99..11220 0 99..66660 0 99..66990 0 9..999337 7 99..99440 0 1010..11225 1 05 1 0..11660 0 9..494337 7 99..331122 D D 7.1257.125 E E -- 33..775500 F F -- 33..002200 G G -- 22..993377 H H 33..00000 0 44..00000 0 44..66770 0 55..00000 0 66..33775 5 99..99669 9 77..66888 8 99..22550 0 99..77550 0 1010..88775 5 1133..11220 0 1133..880000 J J 33..55000 0 33..88112 2 44..99338 8 55. 3. 3775 5 66..33112 2 77..00000 0 88..00000 0 88..88775 5 99..44338 8 99..99330 0 1100..44338 8 1111..55000 0 1111..77550 0 1133..99000 0 1144..557700

(16)

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Wireline Adapter Kit For “NC-1” Bridge Plug

Assembly and Dimensional Data Drawing No. 754-055

8-2-00 8-2-00

Cement Retainer_bridge Plug

REMEDIAL SYSTEMS

REMEDIAL SYSTEMS

TECHNICAL UNIT

TECHNICAL UNIT

Models “N-1” and “NC-1” Bridge Plugs and

Models “N-1” and “NC-1” Bridge Plugs and

Wireline Adapter Kit

Wireline Adapter Kit

Product Family Nos. H40120, H40122, H40121, H40123, H43824 and H43825

Product Family Nos. H40120, H40122, H40121, H40123, H43824 and H43825

Introduction

Introduction

Features /

Features / Benefit

Benefits

s

C

C

H

H

S

S

B

B

A

A

Wireli

Wireline

ne Set

Set

Mechani

Mechanical

cal Set

Set

WARNING

WARNING

Specification Guide

Specification Guide

Model

Models

s “N-1”

“N-1” and

and “NC-1”

“NC-1” Bridge

Bridge

Plugs and Wireline Adapter Kit

Plugs and Wireline Adapter Kit

Accessory Guide

Accessory Guide

Setti

Setting

ng Tool Selection Guide

Tool Selection Guide

Models “N-1” and “NC-1” Bridge

Models “N-1” and “NC-1” Bridge

Plugs and Wireline Adapter Kit

Plugs and Wireline Adapter Kit

Operating Instructions

Operating Instructions

Recomme

Recommended

nded Drill Out

Drill Out Procedu

Procedures

res

For Model “N-1” and “NC-1” Bridge

For Model “N-1” and “NC-1” Bridge

Plug

Plug

Suggeste

Suggested

d Rotary Operation

Rotary Operation

Conversion Procedures

Conversion Procedures

How To Obtain A “Basic Unit” From:

How To Obtain A “Basic Unit” From:

“Basic Unit”

“Basic Unit” Conversi