ADING SRB.pdf

(1)

(2)

2 Some people have a dream. They are prepared to make a

step towards something big. To make their vision come true

they have created a company. They wanted it to be a part of

a construction. A road, a bridge, a dam, a house. The house

is built from the foundations and the ADING foundations

are its employees. It is big as its people are.

It may sound impossible, but there is only one goal:

ADING to be a component of every construction.

"ADING was founded in 1969 in Skopje, Republic of

Macedonia and is one of the leading European companies

for production of chemical products for the Building and

Construction industry. The joint work of the expert teams

from the divisions for Research, Development, Production

and Technical Department, has made possible design and

production of more than 90 products, which are being

marketed in a number of countries throughout the world.

This promotional material, which summarizes the

production range of our products, along with areas of

application, technical characteristics and kinds of

packing, are intended to provide basic directions in your

selection of products. For more detailed information, our

experts team from the Technical Department is at your

disposal at all times."

about Ading ...

ADING has been certified as meeting the

requirements of ISO 9001-2000 and ISO 14001

Neki ljudi imaju san. Spremni su da uične korak za nešto

veliko. Da bi ostvarili svoju viziju, stvorili su Kompaniju.

Žele da budu deo svake gradnje. Put, most, brana, kuća.

Kuća se gradi od temelja, velika je koliko su veliki njeni

ljudi, a temelji ADING-a su njegovi zaposleni.

Možda zvuči nemoguče, ali cilj je jedan:

Sastavni deo svake gradnje da bude ADING.

ADING je formiran 1969. god. u Skoplju, R. Makedonija, i

jedna je od vodečih evropskih kompanija za proizvodnju

hemijskih proizvoda za graðevinarstvo.

Saradnja ekspertskih timova sektora za Istraživanje,

Razvoj, Proizvodnju i Tehnički plasman, omogučuje

dizajniranje i proizvodnju preko 90 proizvoda, koji se

plasiraju u mnogim zemljama sveta.

Ovaj prospektni materijal u kome je sumiran proizvodni

program, sa oblastima primene, tehničkim

karakte-ristikama i vidovima pakovanja, treba da Vam da osnovne

naznake za izbor proizvoda. Za detaljnije informacije, naš

ekspertski tim Tehničkog sektora stoji Vam na

raspolaganju.

za Ading ...

ADING poseduje sertifikat

ISO 9001-2000 i ISO 14001

(3)

PRODUCT GUIDE

Admixtures for concrete and mortar

Grouting and sealing

Concrete repair

Industrial and sports flooring

Joint sealants

Waterproofing

Protective coatings

Fire protection materials

Building adhesives

Leveling compounds

Aditivi za betone i maltere

Smese za zalivanje

Reparacija betona

Industrijski i sportski podovi

Kitovi

Hidroizolacije

Za{titni premazi

Protivpo`arni materijali

Gra|evinska lepila

Smese za izravnavanje

PROIZVODNI PROGRAM

(4)

SLIKA 1

SUPERFLUID-21

POROCINITEL

VRSKA-U

SUPERFLUID

HIDROFOB

HIDROZIM

SUPERFLUID-T

INGUNIT

(5)

ADMIXTURES FOR CONCRETE AND MORTAR

ADITIVI ZA BETONE I MALTERE

Plastifikatori

Superplastifikatori

Hiperplastifikatori

Aditivi za beton vlažan kao zemlja

Aditivi za vodonepropustnost

Aeranti

Ubrziva~i

Usporiva~i

Aditivi za zimsko betoniranje

Plasticizers

Superplasticizers

Hyperplasticizers

Admixtures for semi-dry concrete

Waterproofed admixtures

Air entraining admixtures

Accelerations

Retarders

(6)

6 Admixtures for concrete and mortar

Plasticizers

Superplasticizers

Plasticizer based on naphtalene sulpho-nate. It is used in building construction for pumped and classical concretes.

Superplasticizer based on naphtalene sulphonate. Enables achieving high initial and final concrete strengths. It is used for concretes cast with reduced W/C factor, in concreting heavily reinforced concrete sections, pumped concretes.

Superplasticizer based on naphtalene ligno sulphonate. Capable of maintaining longer concrete consistency (from 60 - 120 minutes). It is used for transported ready-mixed and pumped concretes, in concreting large concrete sections and for concretes where revibration is necessary. Superplasticizer based on ligno sulpho-nate. Capable of maintaining longer concrete consistency (from 120 - 180 minutes). It is used for transported and pumped concretes, in concreting large concrete sections and concretes where revibration is necessary.

Superplasticizer based on melamine formaldehyde. It is used for thermally treated concretes (steam curing) where steam curing time is reduced by 20-50%.

FLUIDING ASTM C494 type A, BS 5075 part 1 EN 934-2 table 2 SUPERFLUID ASTM C494 type F, BS 5075 part 3, EN934-2 table 3.1 and 3.2

SUPERFLUID-M1

ASTM C494 type G, BS 5075 part 3 EN934-2 table 11.1 and 11.2

SUPERFLUID-M1M

ASTM C494 type G,

BS 5075 part 3

EN934-2 table 11.1 and 11.2

SUPERFLUID-T

ASTM C494 type F, E,

EN 934-2 table 3.1 and 3.2

Form: brown liquid Dosage: 4-10 gr./ kg.cem. Water reduction: up to 12%

3 Bulk density: 1,15 kg/dm

Form: brown liquid Dosage: 8-20 gr./ kg.cem. Water reduction: up to 22% 3 Bulk density: 1,16 kg/dm Plastic cans: 5 / 12 / 24 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 12 / 24 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 10 / 20 kg. Plastic barrels:220 kg. Plastic containers: 1100 kg. Plastic cans: 5 / 12 / 24 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 12 / 25 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 12 / 25 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 12 / 25 kg. Barrels: 240 kg. Containers: 1200 kg. Plastic cans: 5 / 12 / 25 kg. Barrels: 240 kg. Containers: 1200 kg.

Product

Description and application

Technical features

Packaging

FLUIDING-M ASTM C494 type D, BS 5075 part 1 EN 934-2 table 2 and 10 FLUIDING-MS EN 934-2 table 2 & 10 ASTM C494 type D FLUIDING-M1M ASTM C494 type D, BS 5075 part 1 EN 934-2 table 2 and 10

Plasticizer produced on lignosulphonate base. It is used in construction for pumped and classical concretes capable of maintaining longer concrete consistency, for transport up to 2 hours

Economical plasticizer on lignosulpho-nate base. It is used for pumped and c l a s s i c a l c o n c r e t e s c a p a b l e o f maintaining longer concrete consistency, for transport up to 2 hours.

Plasticizer produced on lignosulphonate base. It is used in construction for pumped and classical concretes capable of maintaining longer concrete consistency, for transport up to 3 hours

Form: Brown liquid Dosage: 3-10 gr./kg.cem Water reduction: up to 12%

2 Bulk density: 1,15 kg/dm Form: Brown liquid Dosage: 3-15 gr./kg.cem. Water reduction: 5 - 12% Bulk density:

2 1,09 - 1,15 kg/dm Form: Brown liquid Dosage: 3-10 gr./kg.cem Water reduction: up to 12%

(7)

Superplastifikatori

FLUIDING

ASTM C494 type A, BS 5075 part 1 EN 934-2 tabela 2

Plastifikator proizveden na bazi naftalin sulfonata. Primenjuje se u visokogradnji za pumpane i klasične betone.

Forma: tečnost braon boje Doziranje: 6-10 gr./kg.cem. Redukcija vode: do 12% Zapreminska težina: 3 1,15 kg/dm Plastične kante: 5/ 12/ 24 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg. FLUIDING-M ASTM C494 type A, BS 5075 part 1 EN 934-2 tabela 2

Plastifikator proizveden na bazi lignosulfonata. Primenjuje se za proizvodnju pumpanih i klasičnih betona koji se pre ugradnje transportuju od 1 do 2 sata.

Forma: tečnost braon boje Doziranje: 6-10 gr./kg.cem. Redukcija vode: do 12% Zapreminska težina: 3 1,15 kg/dm Plastične kante: 5/ 12/ 24 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg. FLUIDING-M1M ASTM C494 type A, BS 5075 part 1 EN 934-2 tabela 2

Plastifikator proizveden na bazi lignosulfonata. Primenjuje se za proizvodnju pumpanih i klasičnih betona koji se pre ugradnje transportuju od 2 do 3 sata.

Forma: tečnost braon boje Doziranje: 6-10 gr./kg.cem. Redukcija vode: do 12% Zapreminska težina: 3 1,15 kg/dm Plastične kante: 5/ 12/ 24 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg.

Aditivi za betone i maltere

Plastifikatori

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

SUPERFLUID GOST 24211-2003 ASTM C494 type F, BS 5075 part 3 EN 934-2 tabela 3.1 i 3.2 SUPERFLUID-M1 ASTM C494 type G, BS 5075 part 3 EN 934-2 tabela 11.1 i 11.2 SUPERFLUID-M1M ASTM C494 type G, BS 5075 part 3 EN 934-2 tabela 11.1 i 11.2 SUPERFLUID-T ASTM C494 type F, EN 934-2 tabela 3.1 i 3.2

Forma: tečnost braon boje Doziranje: 8-20 gr./kg.cem. Redukcija vode: do 25% Zapreminska težina: 3 1,18 kg/dm Plastične kante: 5/ 12/ 25 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg. Superplastifikator proizveden na bazi

naftalin sulfonata. Omogućava postizanje visokih početnih i krajnjih otpornosti kod betona. Primenjuje se kod livenih betona sa normalnim W/C faktorom, prilikom betoniranja gusto armiranih preseka, kod pumpanih betona.

Forma: tečnost braon boje Doziranje: 8-20 gr./kg.cem. Redukcija vode: do 25% Zapreminska težina: 3 1,2 kg/dm Plastične kante: 5/ 12/ 25 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg. Superplastifikator proizveden na bazi

naftalin ligno sulfonata. Omogućava dugotrajno održavanje konzistencije betona u intervalu od 60 do 120 minuta. Primenjuje se kod transportnih i pumpanih betona, betoniranja velikih betonskih preseka, betona kod kojih je potrebno revibriranje.

Superplastifikator proizveden na bazi ligno sulfonata. Omogućava dugotrajno održavanje konzistencije betona u intervalu od 120 do 180 minuta. Primenjuje se kod transportnih i pumpanih betona, betoniranja velikih betonskih preseka, betona kod kojih je potrebno revibriranje.

Superplastifikator proizveden na bazi melamin formaldehida. Primenjuje se kod betona koji se termički obrađuju (zaparivanje), pri čemu se smanjuje

Plastične kante: 5/ 12/ 25 kg. Metalna burad: 240 kg. Kontejneri: 1200 kg. Plastične kante: 5/ 12/ 25 kg. Metalna burad: 240 kg. Forma: tečnost braon boje

Doziranje: 8-20 gr./kg.cem. Redukcija vode: do 20% Zapreminska težina:

3 1,15 kg/dm

Forma: tečnost braon boje Doziranje: 8-20 gr./kg.cem. Redukcija vode: do 22% Zapreminska težina: FLUIDING-MS EN 934-2 tabela 2 i tabela 10 ASTM C494 type D

Ekonomični plastifikator proizveden na bazi lignosulfonata. Primenjuje se za proizvodnju pumpanih i klasičnih betona koji se pre ugradnje transportuju od 1,5 do 2 sata.

Forma: tečnost braon boje. Doziranje: 3-15 gr./kg.cem. Redukcija vode: 5-12% Zapreminska težina: 3 1,09 - 1,15 kg/dm Plastične kante: 5 /10/20 kg. Burad: 220 kg. Kontejneri: 1100 kg.

(8)

8 Admixtures for concrete and mortar

Hyperplasticizers

Plastic cans: 5/ 10/ 20 kg. Barrels: 220 kg. Containers: 1100 kg. Plastic cans: 5/ 10/ 20 kg. Barrels: 200 kg. Containers: 1000 kg. Plastic cans: 5/ 10/ 20 kg. Barrels: 200 kg. Containers: 1000 kg. Plastic cans: 5/ 10/ 20 kg. Barrels: 200 kg. Containers: 1000 kg. Plastic cans: 5/ 10/ 20/ 50 kg. Barrels: 220 kg. Containers: 1100 kg. Plastic cans: 5/ 10/ 20/ 50 kg. Barrels: 220 kg. Containers: 1100 kg. Plastic cans: 5/ 10/ 20 kg. Barrels: 220 kg. Containers: 1100 kg.

Product

Description and application

Technical features

Packaging

SUPERFLUID 21S EN934-2 table 3.1 i 3.2 ASTM C494 type A, F SUPERFLUID 21M EN934-2 table 11.1 i 11.2 ASTM C494 type D, G SUPERFLUID 21M1M EN934-2 table 11.1 i 11.2 ASTM C494 type D, G SUPERFLUID 21F

EN 934-2 table 3.1, 3.2 i 7 ASTM C494 type E, F SUPERFLUID 21K SUPERFLUID 21T SUPERFLUID-21

EN 934-2 table 3.1 i 3.2 ASTM C494 type A, F

Hiperplasticizer produced on polycarbo-xylate base. Enables achieving high water reduction and extremely high initial and final concrete strength. It is used for self-compacting concretes (SCC), pumped concretes and in concerting of heavily reinforced concrete sections.

Hiperplasticizer produced on polycar-boxylate base. Enables achieving high water reduction and longer consistency up to 2 hours. It is used for longer transported ready mix concrete, self-compacting concretes (SCC), pumped concretes and in concerting of heavily reinforced concrete sections.

Hiperplasticizer produced on polycar-boxylate base. Enables achieving high water reduction and longer consistency up to 3 hours. It is used for longer transported ready mix concrete, self-compacting concretes (SCC), pumped concretes and in concerting of heavily reinforced concrete sections.

Hiperplasticizer produced on polycar-boxylate base. Enables high water reduction, accelerator of hardening and achieving extremely high initial and final concrete strength. It is used for prefabricated concrete elements (with or without steam cureing, when faster mold release is needed.

H i p e r p l a s t i c i z e r p r o d u c e d o n polycarboxylate base. Enables achieving high water reduction and longer consistency up to 2 hours. It is used for longer transported ready mix concrete, self-compacting concretes (SCC), pumped concretes and in concerting of heavily reinforced concrete sections. Hyper plastificator for concretes with t h e r m a l p r o c e s s i n g ( v a p o u r i n g ) , produced on polycarboxylic base. It is used for concrete elements treated with t h e r m a l p r o c e s s i n g ( v a p o u r i n g ) , production of prefabricated concrete elements, when faster mold release is needed.

Hiperplasticizer produced on polycar-boxylate base. Enables achieving of high initial and final concrete strength. It is used for selfcompacting concretes (SCC), pumped concretes and in con-creting of heavily reinforced concrete sections.

Form: Light Brown liquid Dosage:

for classic concrete 2-5 gr./kg.cem for SCC 6-15 gr./kg.cem Water reduction: up to 35% 2 Bulk density: 1,10kg/dm

Form: White liquid Dosage:

for classic concrete 2.5-8 gr./kg.cem for SCC 8-15 gr./kg.cem Water reduction: up to 30% 2 Bulk density: 1,035kg/dm

Form: White liquid Dosage:

for classic concrete 2.5-8 gr./kg.cem for SCC 8-15 gr./kg.cem Water reduction: up to 30% 2 Bulk density: 1,03kg/dm

Form: White liquid Dosage: 8-15 gr./kg.cem Water reduction: up to 30%

2 Bulk density: 1,03kg/dm

Form: Brown liquid Dosage: 2,5-6 gr./kg.cem. Water reduction: 12-20% Bulk density:

2 1,08 - 1,15 kg/dm

Form: Brown liquid Dosage: 3-12 gr./kg. Water reduction: up to 12%

2 Bulk density: 1,09 kg/dm Form: Light Brown liquid Dosage:

for classic concrete 3-6 gr./kg.cem for SCC 8-15 gr./kg.cem Water reduction: up to 30% 2 Bulk density: 1,10kg/dm

(9)

Hiperplastifikatori

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

SUPERFLUID-21

EN 934-2 tabela 3.1 i 3.2 ASTM C494 type A, F

Forma: tečnost braon boje Doziranje: Za klasične betone: 3-6 gr./kg.cem. Za samozbijajuće betone: 8-15 gr./kg.cem. Redukcija vode: do 30% Zapreminska težina: 3 1,1 kg/dm Plastične kante: 5/ 10/ 20 kg. Metalna burad: 220 kg. Kontejneri: 1100 kg. H i p e r p l a s t i f i k a t o r p r o i z v e d e n n a

polikarboksilatnoj bazi. Omogućava postizanje ekstremno visokih početnih i krajnjih otpornosti betona. Primenjuje se kod samozbijajućih betona, pumpanih betona, prilikom betoniranja gusto armiranih preseka.

H i p e r p l a s t i f i k a t o r p r o i z v e d e n n a polikarboksilatnoj bazi. Za postizanje ekstremno visokih redukcija vode, visokih početnih i krajnjih otpornosti betona. Primenjuje se kod samozbijajućih betona, pumpanih betona, prilikom betoniranja gusto armiranih preseka i sl.

Forma: tečnost svetlo braon boje Doziranje: Za klasične betone: 2-5 gr./kg.cem. Za samozbijajuće betone: 6-15 gr./kg.cem. Redukcija vode: do 35% Zapreminska težina: 3 1,1 kg/dm Plastične kante: 5/ 10/ 20 kg. Metalna burad: 220 kg. Kontejneri: 1100 kg. SUPERFLUID-21S EN 934-2 tabela 3.1 i 3.2 ASTM C494 type A, F SUPERFLUID-21M EN 934-2 tabela 11.1 i 11.2 ASTM C494 type D, G

Hiperplastifikator sa visokim stepenom r e d u k c i j e v o d e , p r o i z v e d e n n a polikarboksilatnoj bazi. Omogućava dugotrajno održavanje konzistencije betona u intervalu do 2 sata. Primenjuje se kod transportnih betona, betoniranja na visokim temperaturama,pumpanih betona, prilikom betoniranja gusto armiranih preseka i sl. Plastične kante: 5/ 10/ 20 kg. Metalna burad: 200 kg. Kontejneri: 1000 kg. Forma: tečnost beličaste boje

Doziranje: Za klasične betone: 2,5-8 gr./kg.cem. Za samozbijajuće betone: 8-15 gr./kg.cem. Redukcija vode: do 30% Zapreminska težina: 3 1,035 kg/dm Plastične kante: 5/ 10/ 20 kg. Metalna burad: 200 kg. Kontejneri: 1000 kg. Forma: tečnost beličaste boje

Doziranje: Za klasične betone: 2,5-8 gr./kg.cem. Za samozbijajuće betone: 8-15 gr./kg.cem. Redukcija vode: do 30% Zapreminska težina: 3 1,05 kg/dm SUPERFLUID-21M1M EN 934-2 tabela 11.1 i 11.2 ASTM C494 type D, G

Hiperplastifikator sa visokim stepenom r e d u k c i j e v o d e , p r o i z v e d e n n a polikarboksilatnoj bazi. Omogućava dugotrajno održavanje konzistencije betona u intervalu do 3 sata. Primenjuje se kod transportnih betona, betoniranja na visokim temperaturama,pumpanih betona, prilikom betoniranja gusto armiranih preseka i sl. Plastične kante: 5/ 10/ 20 kg. Metalna burad: 200 kg. Kontejneri: 1000 kg. Forma: tečnost svetlo braon

boje Doziranje: 8-15 gr./kg.cem. Redukcija vode: do 30% Zapreminska težina: 3 1,03 kg/dm Hiperplastifikator sa visokim stepenom

redukcije vode i ekstra ubrzivač o č v r š ć a v a n j a , p r o i z v e d e n n a polikarboksilatnoj bazi. Primenjuje se za proizvodnju prefabrikovanih betonskih elemenata ( sa i bez zaparivanja ), prilikom potrebe za brzo oslobađanje oplate i za betonske mešavine sa niskim vodocementnim faktorom.

SUPERFLUID-21F

EN 934-2 tabela 3.1, 3.2 i 7 ASTM C494 type E, F

Aditivi za betone i maltere

SUPERFLUID-21K Plastične kante:

5 /10/20 kg. Burad: 220 kg. Kontejneri: 1100 kg. Forma: tečnost braon boje

Doziranje: 2,5-6 gr./kg.cem. Redukcija vode: 12-20% Zapreminska težina:

3 1,08 - 1,15 kg/dm Hiperplastifikator sa visokim stepenom

r e d u k c i j e v o d e , p r o i z v e d e n n a polikarboksilatnoj osnovi. Omogućava i dugotrajno održivanje konzistencije betona u intervalu do 2 sata. Primenjuje se kod transportnih betona, betoniranja na visokim temperaturama, pumpanih betona, betoniranja gusto armiranih preseka i sl.

(10)

8

10 Admixtures for concrete and mortar

Waterproofed admixtures

Air entraining admixtures

Admixture for watertightness of cement mortars.

Liquid admixture which enables formation of micro air pores in concrete and cement mortars. Provides to the concrete resistance to frost and salts. It is used for concreting dams, airfield runways, concrete pave-ments, kerbs, drain channels.

Complex admixture for watertightness of concretes with plasticizing effect. It is used for construction of foundations, pools, reservoirs and tanks, dams, ports, irrigation system canals, water-catchments, manholes. Admixture for watertightness of concretes. It is used for construction of foundations, pools, reservoirs and tanks, dams, ports, irrigation system canals, water-catchments, manholes. HIDRONORMAL POROCINITEL ASTM C 260; EN 934-2, Table 5 HIDROFOB EN934-2 table 9 HIDROFOB-T EN934-2 table 9

Form: gray powder Dosage: 30-50 gr./ kg.cem. Bulk density in compacted

3 state: 1,1 kg/dm

Form: yellowish liquid Dosage: 0,3-1 gr./ kg.cem.

3 Bulk density: 1,02 kg/dm Form: brown liquid Dosage: 10-20 gr./ kg.cem.

Form: brown liquid Dosage: 10-20 gr./ kg.cem. 3 Bulk density: 1,17 kg/dm Natron bags: 5 kg./ 30 kg. Plastic cans: 5/ 10/ 20 kg. Barrels: 200 kg. Plastic cans: 5/ 12/ 25 kg. Containers: 1200 kg. Plastic cans: 5/ 12/ 25 kg. Containers: 1200 kg.

Product

Description and application

Technical features

Packaging

Admixtures for semi-dry concrete

Plasticizer / accelerating liquid admixture with air entraining properties. Designed for use in no-slump concrete, it is ideally suited for factory-line concrete production such as concrete block, segmental retaining wall units, paving stones, and roofing tile.

ADING PAVER

EN 934-2 table 9

Form: blue liquid Dosage: 5-15 gr./kg.cem. 3 Bulk density: 1,35 kg/dm Plastic cans: 1/ 5/ 10/ 20 kg. Barrels: 200 kg. Containers: 1000 kg.

Product

Description and application

Technical features

Packaging

Admixture for winter concreting

Winter concreting admixture based on nitrate compounds. It is used for concreting at low temperatures (up to

-O 20 C).

HIDROZIM-T

Form: yellowish liquid Dosage: 10-20 gr./kg.cem. 3 Bulk density: 1,35 kg/dm Plastic cans: 1/ 5/ 7/ 14/ 28/ 70 kg. Barrels: 280 kg. Containers: 1300 kg.

(11)

Aditivi za betone i maltere

HIDRONORMAL HIDROFOB EN934-2 tabela 9 HIDROFOB-T EN934-2 tabela 9 D o d a t a k z a v o d o n e p r o p u s n o s t cementnih maltera.

Kompleksni dodatak za vodonepropus-nost betona. Primenjuje se kod izrada fundamenata, bazena, rezervoara, brana, pristaništa, kanala irigacionih sistema, kaptaža, šahti.

Dodatak za vodonepropusnost betona. Primenjuje se kod izrada fundamenata, bazena, rezervoara, brana, pristaništa, kanala irigacionih sistema, kaptaža, šahti.

Forma: sivi prašak

Doziranje: 30-50 gr./kg.cem. Zapreminska težina u

3 zbijenom stanju: 1,1 kg/dm Forma: tečnost braon boje Doziranje: 10-20 gr./kg.cem. Zapreminska težina:

3 1,17 kg/dm

Forma: tečnost braon boje Doziranje: 10-20 gr./kg.cem. Zapreminska težina: 3 1,17 kg/dm Natron vreće: 5 kg./ 30 kg. Plastične kante: 5/ 12/ 25 kg. Kontejneri: 1200 kg. Plastične kante: 5/ 12/ 25 kg. Kontejneri: 1200 kg. POROSTVARAČ ASTM C 269; EN 934-2, Tabela 5

Dodatak za stvaranje mikro-vazdušnih pora u betonu i cementnom malteru. Omogućava izradu betona otpornih na mraz i soli. Primenjuje se kod betoniranja: brana, aerodromskih pisti, betonskih kolovoza, ivičnjaka, kanaleta.

Plastične kante: 5/ 10/ 20 kg. Metalna burad: 200 kg. Forma: žućkasta tečnost Doziranje: 0,3-1 gr./kg.cem. Zapreminska težina: 3 1,02 kg/dm

Aditivi za vodonepropusnost

Aeranti

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

Aditivi za beton vlažan kao zemlja

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

ADING PAVER

EN 934-2 tabela 9

Forma: tečnost plave boje Doziranje: 5-15 gr./kg.cem. Zapreminska težina: 3 1,35 kg/dm Plastične kante: 1/ 5 /10/ 20 kg. Burad: 200 kg. Kontejneri: 1000 kg. Dodatak sa kompleksnim dejstvom, kao

plastifikator i ubrzivač, sa sposobnošću za stvaranje mikro-vazdušnih pora. Predviđen za upotrebu kod betona vlažnih kao zemlja (konzistencija 0), a i d e a l a n z a p r i m e n u u i n d u s t r i j i prefabrikovanih betonskih elemenata kao što su: betonski blokovi, segmenti p o t p o r n i h z i d o v a , e l e m e n t i z a popločavanje (paver elementi), krovne ploče.

HIDROZIM-T GOST 24211-91

Dodatak proizveden na bazi nitratnih jedinjenja. Primenjuje se kod betoniranja i malterisanja na niskim temperaturama

O ( do - 20 C ). Forma: žućkasta tečnost Doziranje: 10-20 gr./kg.cem. Zapreminska težina: 3 1,35 kg/dm Plastične kante: 1,5/ 7/ 14/ 28/ 70 kg. Metalna burad: 280 kg. Kontejneri: 1300 kg.

Aditivi za zimsko betoniranje

Proizvod

Opis i primena

Tehničke

(12)

12 Admixtures for concrete and mortar

Retarders

Polymer admixture

Setting retarder for concrete. It is used for longer transportation of concrete mixtures, concreting at high temperatures (in hot climates), concreting of massive concrete sections.

Admixture for improving adhesion, elasticity and watertightness of mortar and concrete mixtures. It is most often used for repairing concrete structures.

USPORUVAC-D2 (RETADER-D2) ASTM 494 Type B / D EN 934-2 table 8. VRSKA-U (BOND-U)

Form: brown liquid Dosage: 1-10 gr./ kg.cem.

Form: white liquid Dosage: 30-70 gr./ kg.cem. 3 Bulk density: 1,01 kg/dm Plastic cans: 5/ 10/ 22 kg. Barrels: 230 kg. Containers: 1100 kg. Plastic cans: 1/ 5/ 10/ 20 kg. Containers: 1000 kg.

Product

Description and application

Technical features

Packaging

Accelerations

Admixture for setting acceleration of concretes and mortars. It is used for shotcretes and mortars (wet treatment), for tunnels, stabilization of slopes. Admixture for setting acceleration (without alkali) of concretes and mortars. It is used for shotcretes and mortars (wet treatment), for tunnels, stabilization of Admixture for setting acceleration of concretes and mortars. It is used for shotcretes and mortars (dry treatment), for tunnels, stabilization of slopes.

INGUNIT-T ASTM C403 INGUNIT-T EKO ASTM C403 INGUNIT-P ASTM C403

Form: pink liquid

Dosage: 20-60 gr./ kg.cem. 3 Bulk density: 1,45 kg/dm Form: white powder Dosage: 30-90 gr./ kg.cem. Bulk density in compacted

3 state: 1,3 kg/dm Form: white powder Dosage: 20-60 gr./ kg.cem. Bulk density in compacted

3 state: 1,3 kg/dm Plastic cans: 7/ 28 kg. Containers: 1500 kg. Plastic cans: 28 kg Containers: 1400 kg. Natron bags: 20 kg.

(13)

Aditivi za betone i maltere

Plastične kante: 7 kg./ 28 kg. kg. Kontejneri: 1500 kg. Plastične kante: 28 kg. kg. Kontejneri: 1500 kg. Natron vreće: 20 kg. Forma: rozikasta tečnost Doziranje: 20-60 gr./kg.cem. Zapreminska težina: 3 1,45 kg/dm Forma: rozikasta tečnost Doziranje: 30-90 gr./kg.cem. Zapreminska težina: 3 1,45 kg/dm Forma: beli prašak

Doziranje: 20-60 gr./kg.cem. Zapreminska težina u

3 zbijenom stanju: 1,3 kg/dm Dodatak za ubrzavanje vezivanja betona i

maltera. Primenjuje se za prskane betone i maltere (mokar postupak), za tunele, stabilizaciju kosina.

Bez alkalni

vezivanja betona i maltera. Primenjuje se za prskane betone i maltere (mokar postupak), za tunele, stabilizaciju kosina.

dodatak za ubrzavanje

Dodatak za ubrzavanje vezivanja betona i maltera. Primenjuje se za prskane betone i maltere (suvi postupak), za tunele, stabilizaciju kosina. INGUNIT-T ASTM C403 INGUNIT-T EKO ASTM C403 INGUNIT-P ASTM C403 USPORIVAČ-D2 ASTM 494 Type B / D EN 934-2 tabela 8. VEZA-U Plastične kante: 5/ 10/ 22 kg. Metalna burad: 230 kg. Kontejneri: 1100 kg. Plastične kante: 1/ 5/ 10/ 20 kg. Kontejneri: 1000 kg. Forma: tečnost braon boje

Doziranje: 1-10 gr./kg.cem. Zapreminska težina:

3 1,12 kg/dm

Forma: bela tečnost Doziranje: 30-70 gr./kg.cem. Zapreminska težina:

3 1,01 kg/dm Dodatak za usporavanje vezivanja

betona. Primenjuje se za: transport betona na velike udaljenosti, betoniranja na visokim temperaturama, betoniranja masivnih betonskih preseka.

Dodatak za poboljšanje lepljivosti, elastičnosti i vodootpornosti malterskih i betonskih mešavina. Najčešće se primenjuje kod reparacija betonskih konstrukcija.

Ubrzivači

Usporivači

Polimerni aditivi

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

(14)

EKSMAL

(15)

Aditiv za cementne zalivne smese

Malteri za zalivanje na bazi cementa

Aditiv za injektiranja kablova za prednaprezanje

Malteri za zalivanje na bazi epoksida

Admixture for cementitious grouts

Admixtures for grouting prestressing tendons

Epoxy resin grouts

GROUTING AND SEALING

Cementitious grouting mortars

(16)

16 Grouting and sealing

Admixture for cementitious grouts

Admixtures for grouting prestressing tendons

Epoxy resin grouts

Cementitious grouting mortars

Admixture for preparation of cementitious grouts. Enables self-flowing, achieving high early and final compressive and f l e x u r a l s t r e n g t h s , c o m p e n s a t e s shrinkage.

Admixture for preparation of grouting emulsions for prestressing tendons. E n a b l e s s e l f - f l o w i n g , s h r i n k a g e compensation and prevention of water separation.

Three-component epoxy resin grout. It is used for quick and long lasting grouting of structural members, especially in chemically aggressive environments. One-component expansive and self-flowing ready-mix grout. It is used for sealing anchors, bearings of crane girders and bridge structures.

It is produced in several types:

EKSMAL-1 for section from 0,5 - 2,0 cm EKSMAL-4 for section from 2,0 - 6,0 cm EKSMAL-8 for section from 6,0 - 8,0 cm EKSMAL-16 for section from 8,0 -12,0 cm EKSMAL-32 for section > 12,0 cm Quick setting one-component ready-mixed anchoring mixture. It is used for grouting anchors in tunneling, retaining walls and diaphragm-walls.

EKSMAL-K INJEKTING-K ADINGPOKS-Z EKSMAL ASTM C827 KOMPLEKSING-AM ASTM C827

Form: gray powder Dosage: 20 g/kg cem. Bulk density in compacted

3 state: 1,3 kg/dm

Form: gray powder Dosage: 40 g/kg cem. Bulk density in compacted

3 state: 1,3 kg/dm

Form: paste

Bulk density in compacted 3

state: 1,7 kg/dm Compressive strength: after 1 day > 60 MPa after 28 days > 90 MPa Form: gray powder Bulk density in compacted

3 state: 2,4 kg/dm Compressive strength: after 1 day > 30 MPa after 28 days > 60 MPa

Form: gray powder Bulk density in compacted

3 state: 2,4 kg/dm Compressive strength: after 1 day > 25 MPa after 28 days> 60 MPa

Natron bags: 5 kg./ 30 kg. Natron bags: 20 kg. Sets: 17,57 kg. Natron bags: Eksmal-1,4 30 kg. Eksmal-8 30 kg. Eksmal-16 45 kg. Eksmal-32 48,5 kg. Natron bags: 30 kg.

Product

Description and application

Technical features

Packaging

(17)

EKSMAL-K INJEKTING-K EKSMAL ASTM C827 KOMPLEKSING-AM ASTM C827 ADINGPOKS-Z

Forma: sivi prašak Doziranje: ~ 20 gr./kg.cem. Zapreminska težina u 3 zbijenom stanju: 1,3 kg/dm Natron vreće: 5 kg./ 30 kg. Natron vreće: 20 kg. Forma: sivi prašak

Doziranje: 40 gr./kg.cem. Zapreminska težina u

3 zbijenom stanju: 1,3 kg/dm Dodatak za pripremu cementne smese za

zalivanje. Omogućava samorazlivnost, postizanje visokih ranih i krajnjih otpornosti na pritisak i savijanje i kompenzuje skupljanje.

Dodatak za pripremu injekcione smese za injektiranje kablova za prednaprezanje. Omogućava samorazlivnost, kompenzuje skupljanje i sprečava odvajanje vode.

Forma: sivi prašak Zapreminska težina u 3 svežem stanju: 2,4 kg/dm Otpornost na pritisak: za 1 dan > 30 MPa za 28 dana > 60 Mpa Potrošnja: ≈2,2 kg/dm³ Natron vreće: Eksmal-1,4 30 kg. Eksmal-8 30 kg. Eksmal-16 45 kg. Eksmal-32 48,5 kg. Jednokomponentni, ekspandirajući i

samorazlivajući gotov malter za zalivanje. Primenjuje se za zalivanje ankera, podlivanja ležišta kranskih greda i i mostovskih konstrukcija.

Proizvodi se u nekoliko varijanti: EKSMAL-1 za presek od 0,5 - 2,0 cm EKSMAL-4 za presek od 2,0 - 6,0 cm EKSMAL-8 za presek od 6,0 - 8,0 cm EKSMAL-16 za presek od 8,0 -1 2,0 cm Brzovezujuća jednokomponentna gotova smesa. Koristi se za zalivanje ankera u tunelogradnji, kod podpornih zidova i kod dijafragmi.

Forma: sivi prašak Zapreminska težina u 3 zbijenom stanju: 2,4 kg/dm Otpornost na pritisak: za 1 dan > 25 MPa za 28 dana > 60 MPa Natron vreće: 30 kg. Forma: pasta Zapreminska težina u 3 zbijenom stanju: 1,7 kg/dm Otpornost na pritisak: za 1 dan > 60 MPa za 28 dana > 90 MPa Setovi od: 17,57 kg. Trokomponentni epoksidni malter.

Primenjuje se za brzo i trajno zalivanje konstruktivnih elemenata, posebno u hemijski agresivnim sredinama.

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

Smese za zalivanje

Aditiv za cementne zalivne smese

Aditiv za injektiranje kablova za prednaprezanje

Malteri za zalivanje na bazi cementa

(18)

ADINGPOKS-1M

REP

ARA

TUR MAL

TER

REP

ARA

TUR MAL

TER

INJEKTING-B

ADINGPOKS-I

(19)

Malter za reparaciju na cementnoj osnovi

Prajmer na epoksidnoj osnovi

Malter za reparaciju na epoksidnoj osnovi

Smesa za injektiranje na cementnoj osnovi

Smesa za injektiranje na epoksidnoj osnovi

Epoxy resin primer

Epoxy resin repair mortars

Cementitious crack injection grouts

Epoxy resin crack injection grouts

CONCRETE REPAIR

Cementitious repair mortars

(20)

20 Concrete repair

Cementitious repair mortars

Epoxy resin primer

Epoxy resin repair mortars

Two component mixture based on cement polymers. It is used for repairing of concrete and cement mortar elements in all type of constructions.

Three-component thrixotropic epoxy resin primer. It is used for establishing structural bond between old and new concrete.

Three-component, thixotropic mortar based on epoxy resin. It is used for quick and long lasting repairing of concrete and mortar surfaces subjected to heavy mechanical loadings and chemical attack in all types of building structures.

One – component mixture on cement polymer base and fibers, intended for rehabilitation and reparation of concrete and reinforced concrete elements.

Mixture for reimbursement of repaired concrete surfaces on cement polymer base.

Quick setting agent based on cement. It is used for preventing active water penetrations or bleeding of underground structures of impounding reservoirs, dams, reservoirs and storage tanks, pools, tunnels, mining shafts, basements, shelters, retaining walls.

REPARATUR MORTAR GOST R MK.9001.1.4.0384 ASTM C 67 ADINGPOKS-N ASTM 881C ADINGPOKS-1M REPARATUR MORTAR-F REPARATUR GLET UBRZUVAC-C (ACCELERATOR-C) BS 1881 part 4

Form: Acom. Gray powder B com. White liquid 2 Consumption: 22 - 24kg/dm Adhesive strenght: 3MPa (EN 1015-12) Compressive strength: 40MPa (EN 1015-12) Form: paste 3 Bulk density: 1,7 kg/dm Adhesion: (EN 1015-12) 6 MPa Form: paste 3 Bulk density: 1,7 kg/dm Adhesive strength: (EN 1015-12) 4,2 MPa Compressive strength: (EN 1015-11) > 70 MPa Form: gray powder Bulk density in compacted

3 state: 1,55 - 1,80 kg/dm Start of setting: >2h Compressive strength: (EN 1015-11) after 1 hour > 6 MPa after 28 days > 25 MPa Form: gray powder Bulk density in compacted

3 state: 0,8 - 1,1 kg/dm Start of setting: 5 - 6 h Compressive strength: (EN 1015-11) after 1 hour > 6 MPa after 28 days > 25 MPa Form: gray powder Bulk density in compacted

3 state: 1,4 kg/dm Start of setting: (EN 196-3) 1 min. Compressive strength: (EN 1015-11) after 1 hour > 6 MPa after 28 days > 25 MPa

In sets A + B: 30kg Acomp.: Natron bags 25 kg Bcomp: Plastic cans 5 kg Sets: 10,4 kg. Sets: 21 kg. Natron bags: 30 kg. Natron bags: 5 kg./ 30 kg. Natron bags: 5 kg./ 30 kg.

Product

Description and application

Technical features

Packaging

(21)

ADINGPOKS-N ASTM 881C

Tiksotropan, trokomponentni epoksidni prajmer. Primenjuje se za konstruktivno povezivanje starog i novog betona.

Forma: pasta Zapreminska težina: 3 1,7 kg/dm Athezija: (EN 1015-12) 6 MPa Setovi od: 10,4 kg. UBRZIVAČ-Č BS 1881 part 4 Natron vreće: 5 kg./ 30 kg. Forma: sivi prašak

Zapreminska težina u 3 zbijenom sastavu: 1,4 kg/dm Početak vezivanja:

(EN 196-3) 1 min.

Otpornost na pritisak:(EN 1015-11) za 1 sat > 6 MPa za 28 dana > 25 MPa Brzovezujuća smesa na bazi cementa.

Primenjuje se za zaptivanje aktivnih prodora vode ili orošavanja kod podzemnih objekata na akumulacionim jezerima, branama, rezervoarima, bazenima, tunelima, rudarskim oknima, podrumima, skloništima, potpornim zidovima.

ADINGPOKS-1M Forma: pasta Setovi od: 21 kg.

Zapreminska težina: 3 1,7 kg/dm Atheziona jakost: (EN 1015-12) 4,2 MPa Otpornost na pritisak: (EN 1015-11) > 70 MPa Trokomponentni tiksotropni malter na

bazi epoksida. Primenjuje se za brzu i dugotrajnu reparaciju betonskih i malterisanih površina izloženih visokim mehaničkim opterećenjima i hemijskim agresijama kod svih tipova građevinskih konstrukcija.

Reparacija betona

Prajmer na epoksidnoj osnovi

Malteri za reparaciju na cementnoj osnovi

Malter za reparaciju na epoksidnoj osnovi

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

REPARATUR MALTER GOST R MK.9001.1.4.0384 ASTM C 67

Dvokomponentna smesa na bazi cementa i polimera. Koristi se za sanacije b e t o n s k i h , a r m i r a n o b e t o n s k i h i elemenata od cementnog maltera kod svih tipova građevinskih konstrukcija.

Forma: A kom. sivi prašak B kom. bela tečnost

2 Potrošnja: 18 - 20 kg/dm Atheziona jačina: (EN 1015-12) 3,00 MPa Otpornost na pritisak: (EN 1015-12) > 40 MPa U setu A + B = 30 kg. A komponenta: natron vreće 25 kg. B komponenta: plastične kante 5 kg REPARATUR MALTER-F Natron vreće: 30 kg. Forma: sivi prašak

Zapreminska težina u zbijenom sastavu: 1,55 - 1,80

3 kg/dm

Početak vezivanja: > 2 sata Otpornost na pritisak: na 28 dana > 25 MPa Jednokomponentna smesa na bazi

cementa, polimerai fibrina, namenjena za sanacije i reparacije betonskih i armirano betonskih elemenata.

REPARATUR GLET Natron vreće:

5 kg./ 30 kg. Smesa za izravnavanje repariranih

betonskih površina proizvedena na cementno-polimernoj osnovi

Forma: sivi prašak Zapreminska težina u zbijenom sastavu: 0,8 - 1,1

3 kg/dm

Početak vezivanja: 5-6 sati Otpornost na pritisak: na 7 dana > 15 MPa

(22)

22 Concrete repair

Cementitious crack injection grouts

It is used for injecting cracks of widths from 1,0-6,0 mm in all types of reinforced concrete structures.

INJEKTING-B Form: gray powder

Bulk density in compacted 3 state: 1,5 kg/dm Compressive strength: (EN 1015-11) > 30 MPa Natron bags: 30kg.

Epoxy resin crack injection grouts

Two-component epoxy resin system. It is used for injecting cracks of widths up to 1,0 mm in all types of reinforced concrete structures.

ADINGPOKS-I ASTM C881 Type 3

Form: paste

Bulk density in compacted 3 state: 1,05 kg/dm Compressive strength: (EN 1015-11) > 70 MPa Sets: 4,7 kg.

Product

Description and application

Technical features

Packaging

(23)

INJEKTING-B Forma: sivi prašak Natron vreće: 30 kg. Zapreminska težina u 3 zbijenom sastavu: 1,5 kg/dm Otpornost na pritisak: (EN 1015-11) > 30 Mpa Primenjuje se za injektiranje pukotina

širine od 1,0 do 6,0 mm kod svih tipova armirano betonskih konstrukcija.

ADINGPOKS-I ASTM C881 Type 3 Setovi od: 4,7 kg. Forma: pasta Zapreminska težina u 3 zbijenom sastavu:1,05kg/dm Otpornost na pritisak: (EN 1015-11) > 70 MPa Dvokomponentni epoksidni sistem.

Primenjuje se za injektiranje prslina širine do 1,0 mm kod svih tipova armirano betonskih konstrukcija.

Reparacija betona

Smesa za injektiranje na cementnoj osnovi

Smesa za injektiranje na epoksidnoj osnovi

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

(24)

PODING-KK

ADINGPOKS-2 EKO

ADINGPOKS-1B EKO

ADINGSTATIK

PODING-K

ADINGF

A

VORIT

(25)

Cementni podni sistemi

Epoksidni podni sistemi

Sportski podni sistemi

Cementitious flooring systems

Sports systems

INDUSTRIAL AND SPORTS FLOORING

Epoxy resin floor waterproofing systems

INDUSTRIJSKI I SPORTSKI PODOVI

(26)

26 Industrial and sports flooring

Epoxy resin floor waterproofing systems

Low viscosity two-component epoxy resin without solvents. It is used as a precoat for cement bases in applying all epoxide systems and as a waterproofer for concrete surfaces or cement mortar surfaces.

Low viscosity two-component epoxy resin without solvents. It is used as a special precoat for moist cement bases when applying all epoxide systems.

Two-component epoxy resin without solvents. It is used as a chemically resistant and decorative coating on floor, wall and ceiling surfaces in warehouses, car parks, parking lots, production plants, hospitals, laboratories, schools, trade centers, sport halls, reservoirs and tanks. It is applied on concrete, cement mortar or steel base.

Two-component epoxy resin without solvents for self-flowing floor coatings. - is mixed with quartz filler

- for smooth and anti-slip bases - good chemical resistance - high mechanical properties

Two-component epoxy resin without solvents. It is used as decorative mortar prepared with coloured quartz sand and as a finishing transparent coating.

Three-component epoxy system without solvent. It is used as a static conductive 4 floor with a resistance between 5 x 10

6

and 1 x 10 , in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

ADINGPOKS-1P EKO Primer

ADINGPOKS-1PV Moist base primer

ADINGPOKS-1B EKO Coating ADINGPOKS-2 EKO C GOST P RU.9001.6.1.0017 oating ASTM D 2047 ADINGPOKS-1 EKO Mortar and transparent

finishing ASTM C 469 ASTM D 2240

ADINGSTATIK Accepts and conducts the static electricity BS 2050 DIN 51053 Form: paste 2 Consumption: 0,2-0,3 kg/m 3 Bulk density: 1,1 kg/dm Form: paste 2 Consumption: 0,2-0,3 kg/m 3 Bulk density: 1,06 kg/dm Form: paste 2 Consumption: 0,6-1 kg/m 3 Bulk density: 1,4 kg/dm Form: paste 3 Bulk density: 1,35 kg/dm Consumption: depending on way of application Form: paste 3 Bulk density: 1,1 kg/dm Consumption: depending on way of application Form: paste 3 Bulk density: 1,35 kg/dm 2 Consumption: 5 kg/m Specific resistivity: 4 6 5x10 and 1x10 Ω Sets: 3,35 kg. Sets: 5,76 kg. Sets: 5,75 kg. Ading-standard colour card / number 1 Sets: 5,2 kg. Ading-standard colour card / number 1 Sets: 6 kg./19,5 kg. Sets: 9,64 kg.

Color: green and gray

Sports systems

Homogeneous viscous system based on acrylate resins. It is used as finishing sports floor on concrete and asphalt surfaces. The system consists of: - Adingfavorit base

- Adingfavorit skimming coat - Coloured Adingfavorit

ADINGFAVORIT Consumption:

- adingfavorit base 2 0,3-0,5 kg/m

- adingfavorit smooth coat 2 1,7-2 kg/m - adingfavorit coloured 2 0,6-0,8 kg/m Adingfavorit Adingfavorit Adingfavorit base: 10 kg. smooth coat: 56 kg. coloured: 33/66 kg.

Product

Description and application

Technical features

Packaging

(27)

ADINGPOKS-1P EKO Prajmer ADINGPOKS-1PV Prajmer za vlažnu podlogu ADINGPOKS-1B EKO Premaz ADINGPOKS-2 EKO Nanos GOST P RU.9001.6.1.0017 ASTM D 2047 ADINGPOKS-1 EKO Malter i transparentan završni premaz ASTM C 469 ASTM D 2240 ADINGSTATIK Statički provodljiv nanos BS 2050 DIN 51053 ADINGFAVORIT N i s k o v i s k o z n a d v o k o m p o n e n t n a epoksidna smola bez rastvarača. Primenjuje se kao predpremaz za cementne podloge pri nanošenju svih epoksidnih sistema i impregnator za betonske površine ili površine od cementnog maltera.

N i s k o v i s k o z n a d v o k o m p o n e n t n a epoksidna smola bez rastvarača. Primenjuje se kao: specijalni predpremaz za vlažne cementne podloge pri nanošenju svih epoksidnih sistema.

Forma: pasta 2 Potrošnja: 0,3-0,4 kg/m Zapreminska težina: 3 1,1 kg/dm Setovi od: 3,35 kg. Setovi od: 5,76 kg. Forma: pasta 2 Potrošnja: 0,3-0,4 kg/m Zapreminska težina: 3 1,06 kg/dm Forma: pasta 2 Potrošnja: 0,8-1 kg/m Zapreminska težina: 3 1,4 kg/dm Setovi od: 5,75 kg. Ading-standardna ton karta / broj 1 Setovi od: 5,2 kg. Ading-standardna ton karta / broj 1 Forma: pasta Zapreminska težina: 3 1,35 kg/dm Potrošnja: u zavisnosti od načina aplikacije Forma: pasta Zapreminska težina: 3 1,1 kg/dm Potrošnja: u zavisnosti od načina aplikacije Setovi od: 6/19,5 kg. Forma: pasta Zapreminska težina: 3 1,35 kg/dm 2 Potrošnja: 5 kg/m Specifični otpor: 4 6 5x10 i 1x10 W Setovi od: 9,64 kg.

Boja: zelena i siva Dvokomponentna epoksidna smola bez

rastvarača. Primenjuje se kao hemijski otporan i dekorativan premaz za podne, zidne i plafonske površine u: magacinima, garažama, parkiralištima, proizvodnim pogonima, bolnicama, laboratorijama, učionicama, tržnim centrima, sportskim salama, rezervoarima. Nanosi se na podloge od betona, cementnog maltera ili čelika.

Dvokomponentna epoksidna smola bez rastvarača za samorazlivajuće podne nanose:

- meša se sa kvarcnim punilom - za glatke i protivklizne obloge - dobra hemijska otpornost - visoke mehaničke karakteristike Dvokomponentna epoksidna smola bez rastvarača. Primenjuje se kao dekorativni malter u boji spremljen sa kvarcnim peskom i kao završni transparentni premaz.

Trokomponentni epoksidni sistem bez rastvarača. Primenjuje se kao statički provodljiv pod sa otpornošću između

4 6

5x10 i 1x10 Ω, u objektima kao što su proizvodne hale elektronske opreme, operacione sale, elektronske laboratorije, kompjuterski centri, proizvodni pogoni i magacini za boje, lakove i rastvarače, pogoni za proizvodnju tkanina i vlakana, “čiste” sobe.

Homogen viskozni sistem na bazi Potrošnja: Adingfavorit

Industrijski i sportski podovi

Epoksidni podni sistemi

Sportski podni sistemi

Proizvod

Opis i primena

Tehničke

karakteristike

Pakovanje

Proizvod

Opis i primena

Tehničke

(28)

28 Industrial and sports flooring

Cementitious flooring systems

Monolithic final coating of thicknesses d = 3-5 mm, produced of cement base and quartz filler. It is used for mechanically loaded floors where abrasion resistance is required e.g. in warehouses, cold-storage rooms or buildings, parking lots, workshops, auto repair shops, petrol filling stations, heliports, electric power plants. It is produced in gray, red and green colour.

Monolithic final coating of thicknesses d = 3-5 mm, produced of cement base and corundum. It is used for heavily mechanically loaded floors where abrasion resistance is required e.g. in warehouses, cold-storage rooms or buildings, parking lots, workshops, auto repair shops, petrol filling stations, heliports, electric power plants. It is produced in gray, red and green colour.

PODING-K GOST P RU.9001.6.2.0017 PODING-KK Form: powder 2 Consumption: 5 kg/m 3 3 Wear: 13 cm /50 cm Compressive strength: 70 MPa Form: powder 2 Consumption: 5 kg/m 3 3 Wear: 7 cm / 50 cm Compressive strength: 70 MPa Natron bags: 30 kg. Color:

gray, green and red Natron bags: 30 kg.

Color:

gray, green and red

(29)

PODING-K GOST P RU .9001.6.2.0017 PODING-KK Natron vreće: 30 kg. Boja:

siva, zelena, crvena Natron vreće: 30 kg.

Boja:

siva, zelena, crvena Forma: prašak 2 Potrošnja: 5 kg/m 3 3 Habanje: 13cm /50 cm Otpornost na pritisak: 70 MPa Forma: prašak 2 Potrošnja: 5 kg/m 3 3 Habanje: 7cm /50 cm Otpornost na pritisak: 70 MPa

Monolitan završni nanos debljine d=3-5m, proizveden na bazi cementa i

kvarcnog punila. Primenjuje se kod mehanički opterećenih podova od koji se traži visoka abraziona otpornost kao što su: magacini, hladnjače, parkirališta, radionice, autoservisi, benzinske stanice, heliodromi, elektrane. Proizvodi se u sivoj, crvenoj i zelenoj boji.

Monolitan završni nanos debljine d=3-5m, proizveden na bazi cementa i

korunda. Primenjuje se kod visoko mehanički opterećenih podova od koji se traži visoka abraziona otpornost kao što su: magacini, hladnjače, parkirališta, radionice, autoservisi, benzinske stanice, heliodromi, elektrane. Proizvodi se u sivoj, crvenoj i zelenoj boji.

Industrijski i sportski podovi

Cementni podni sistemi

Proizvod

Opis i primena

Tehničke

(30)

BITEK-K

FUGOFIL

BITEK-A

(31)

KITOVI

(32)

32 Joint sealants

Two-component permanently elastic polysulphide sealant. It is used for sealing vertical and horizontal expansion joints in all building structures.

Joints dimensions: - width: from 5-50 mm - depth: ½ of joint width

One-component permanently plastic cold applied sealant based on bitumen-caoutchouc. It is used for sealing joints in irrigation concrete canal systems. Joint dimensions:

- width: from1-40 mm - depth: ½ of joint width

One-component, elastic, polymer-bitumenous hot applied sealant. It is used for sealing joints of concrete pavements and asphalt surfaces.

Joint dimensions: - width: from 10-30 mm - depth: ½ of joint width.

One-component, elastic sealant based on acrylate. It is used for sealing construction joints for floors, prefabricated members, joints between finishing carpentry and walls.

Waterproof cement-based sealant for pointing. It is used for sealing joints of ceramic, marble, stone or concrete tiles. Three-component water-based epoxide sealant. It is used for sealing joints of acid resistant ceramic tiles in aggressive environments. TILING ASTM C 920-87 Type M, Grade NS, Class 25 BS 4254:1983 BITEK-K BITEK-A ASTM D 3405 ADINGAKRIL ADINGPOKS-K FUGOFIL

Form: gray paste 3 Bulk density: 1,55 kg/dm Elongation: 25% Shore hardness "A": 25÷30

Temperature stability: o o -20 C up to +60 C

Form: black paste 3 Bulk density: 1,2 kg/dm Elongation: 10% Temperature stability: o o -20 C up to +80 C

Form: black paste 3 Bulk density: 1,15 kg/dm Elongation: 15% Application temperature: o o 200 C - 210 C Form: paste 3 Bulk density: 1,7 kg/dm Elongation: 40% Form: paste Bulk density: 3 1,6 kg/dm Temperature stability: o o -20 C up to +70 C Form: powder 2 Consumption: 0,4-0,5 kg/m Sets: 4,4 kg. Steel cans: 5 kg./ 20 kg. Metal barrels: 88 kg. Plastic cylinder: 0,4 kg. Platic cans: 4,0 kg. Color: white, gray, green Sets: 17,57 kg. Natron bags: 5 kg./ 30 kg. Ading-standard colour card

(33)

BITEK-K Metalna burad: 88 kg. TILING ASTM C 920-87 Type M, Grade NS, Class 25 BS 4254: 1983 BITEK-A ASTM D 3405 ADINGAKRIL ADINGPOKS-K FUGOFIL D v o k o m p o n e n t n i t r a j n o e l a s t i č n i polisulfidni kit. Koristi se za ispunu vertikalnih i horizontalnih dilatacionih spojnica ( fuga ) kod svih građevinskih objekata.

Dimenzije spojnica: - širina: 5 - 50 mm

Jednokomponentni trajnoplastični kit na bazi bitumen kaučuka, ugradljiv u hladnom postupku. Primenjuje se za ispunu fuga kod betonskih kanala za navodnjavanje, irigacionih sistema. Dimenzije spojnica:

- širina: 1 - 40 mm

Forma: siva pasta Zapreminska težina:

3 1,55 kg/dm Izduživanje: 25% Tvrdoća po ‚‚Shore “(A): 25¸-30

Temperaturna stabilnost: O O

-20 C do +60 C

Setovi od: 4,4 kg.

Forma: crna pasta Zapreminska težina: 3 1,2 kg/dm Izduživanje: 10% Temperaturna stabilnost: O O -20 C do +80 C Limene kante: 5 kg./ 20 kg.

Forma: crna pasta Zapreminska težina:

3 1,15 kg/dm Izduživanje: 15% Temperatura pri aplikaciji:

O O 200 C - 210 C Jednokomponentni, elastični, polimer-

bitumenski, toplonanoseći kit. Primenjuje se za ispunu fuga kod betonskih kolovoza i asfaltnih površina.

Dimenzije spojnica: - širina: 10 - 30 mm

Jednokomponentni elastični kit na bazi akrilata. Primenjuje se za ispunu radnih fuga kod podova, montažnih elemenata, spojnica između stolarije i zida.

Forma: pasta Zapreminska težina: 3 1,7 kg/dm Izduživanje: 40% Kartuše: 0,4 kg. Plasti :4,0 kg. Boja: bela, siva, zelena

čne kante

Trokomponentni epoksidni kit na vodenoj bazi. Primenjuje se za ispunu fuga kod kiselootpornih keramičkih pločica u agresivnim sredinama. Forma: pasta Zapreminska težina: 3 1,6 kg/dm Temperaturna stabilnost: O O -20 C do +70 C Setovi od: 17,57 kg.

Vodootporna smesa za fugiranje na cementnoj osnovi. Primenjuje se za ispunu fuga kod keramičkih, mermernih, kamenih ili betonskih pločica.

Forma: prašak 2 Potrošnja: 0,4-0,5 kg/m Natron vreće: 5kg./ 30kg. Ading-standardna ton karta

Kitovi

Proizvod

Opis i primena

Tehničke

(34)

HIDROMAL FLEKS

ADINGDFLEKS

HIDROMAL FLEKS

HIDROMAL

(35)

Hidroizolacije na cementnoj osnovi

Hidroizolacije na akrilatnoj osnovi

Hidroizolacije na polimer bitumenskoj osnovi

Cementitious waterproofing systems

Polymer bitumen-based waterproofing systems

WATERPROOFING

Acrylic based waterproofing systems

HIDROIZOLACIJE

(36)

36 Waterproofing

Cementitious waterproofing systems

Acrylic based waterproofing systems

Polymer bitumen-based waterproofing systems

Ready-mixed cement-based mixture for execution of rigid waterproofing. It is used for waterproofing of structures subjected to positive and negative hydrostatic pressure, e.g. for waterproofing pools, settling tanks, water treatment plants, underground structures, water reservoirs, manholes, sanitary facilities.

Ready-mixed mixture for execution of elastic waterproofing based on acrylate. It is used for waterproofing pools, balconies, flat roofs, sanitary facilities, kitchens, laundries, embedded concrete members.

Ready-mixed bitumen-caoutchouc mixture for execution of elastic waterproofing, cold applied. It is used for waterproofing foundations, embedded concrete members, flat roofs, multi-storey car parks, rehabilitation of old insulations. Two-component cement-based system for execution of elastic waterproofing. It is used for waterproofing of structures subjected to positive and negative h y d r o s t a t i c p r e s s u r e e . g . f o r waterproofing pools, settling tanks, water treatment plants, underground structures, balconies, manholes, sanitary facilities.

HIDROMAL

ADINGFLEKS

BITEK-M

HIDROMAL FLEKS

Form: gray powder 2 Consumption: 5-6 kg/m Water pressure resistance: - positive 6 atm. - negative 2 atm. Form: paste 2 Consumption: 2,5-3 kg/m Elasticity: 180%

Form: black paste 2 Consumption: 3-5 kg/m Elasticity: 180% Form:

A kom. - gray powder B kom. - white liquid

2 Consumption: 2 kg/m Water pressure resistance: - positive 6 atm. - negative 2 atm. Elasticity: 25% Natron bags: 5 kg./ 30 kg. Plastic cans: 4 kg./ 20 kg. Color:

white, blue, gray and terra cotta Steel cans: 4 kg./ 20 kg. Sets: 10 kg./ 60 kg.

Product

Description and application

Technical features

Packaging

(37)

HIDROMAL HIDROMAL FLEKS GOST PRU.9001.6.2.0014 HIDROMAL FLEKS GOST PRU.9001.6.2.0014 ADINGFLEKS BITEK-M

Gotova smesa za izvođenje krute h i d r o i z o l a c i j e n a b a z i c e m e n t a . Primenjuje se za hidroizolaciju objekata izloženih pozitivnom i negativnom hidrostatičkom pritisku kao što su: bazeni, taložnici, stanice za prečišćavanje, podzemni objekti, rezervoari za vodu, šahte, septičke jame.

Forma: sivi prašak 2 Potrošnja: 5-6 kg/m Otpornost na hidrostatički pritisak: - pozitivan 6 atm - negativan 2 atm Natron vreće: 5 kg./ 30 kg. Setovi od: 10 kg./ 60 kg. Setovi od: 10 kg./ 60 kg. Forma:

A komp. - sivi prašak B komp. - bela tečnost

2 Potrošnja: 2 kg/m Otpornost na hidrostatički pritisak: - pozitivan 6 atm - negativan 2 atm Elastičnost: 25% Forma:

A komp. - sivi prašak B komp. - bela tečnost

2 Potrošnja: 2 kg/m Otpornost na hidrostatički pritisak: - pozitivan 6 atm - negativan 2 atm Elastičnost: 40%

Gotova smesa za izvođenje elastične hidroizolacije na bazi akrilata. Primenjuje se za hidroizolaciju bazena, balkona, ravnih krovova, septičkih jama, kuhinja, p e r i o n i c a , u k o p a n i h b e t o n s k i h elemenata. Forma: pasta 2 Potrošnja: 2,5-3 kg/m Elastičnost: 180% Plastične kante: 4 kg./ 20 kg. Boja:

bela, plava, siva i terakot

Dvokomponentni sistem za izvođenje elastične hidroizolacije na cementnoj osnovi. Primenjuje se za hidroizolaciju objekata izloženih pozitivnim i negativnim hidrostatičkim pritiscima kao što su: b a z e n i , t a l o ž n i c i , s t a n i c e z a prečišćavanje, podzemni objekti, balkoni, šahte, septičke jame.

Gotova smesa za izvođenje elastične hidroizolacije hladnm postupkom, proizvedena na bazi bitumen kaučuka. Primenjuje se za hidroizolacije temelja, ukopanih betonskih elemenata, ravnih krovova, spratnih garaža, kod sanacija starih hidroizolacija.

Forma: crna pasta 2 Potrošnja: 3-5 kg/m Elastičnost: 180% Limene kante: 4 kg./ 20 kg.

Hidroizolacije

Hidroizolacije na cementnoj osnovi

Hidroizolacije na akrilatnoj osnovi

Hidroizolacije na polimer bitumenskoj osnovi

Proizvod

Opis i primena

Tehničke

karakteristike

Tehničke

karakteristike

Tehničke

karakteristike

Pakovanje

(38)

ANTIKOROZIN-BB

ADINGPOKS-TER

ANTIKOROZIN-E

(39)

Za{titni premazi za beton i ~elik

Za{titni premazi za ~elik

Za{titni premazi za beton

Protective coating for concrete and steel

Protective coating for concrete

PROTECTIVE COATINGS

Protective coating for steel

ZAŠTITNI PREMAZI

(40)

40 Protective coatings

Protective coating for concrete and steel

Protective coating for steel

Protective coating for concrete

Two-component epoxy-based coating. It is used for protection against corrosion of steel surfaces subjected to chemical attack.

One-component coloured acrylate-based mixture. It is used for protection against corrosion of new, old or repaired concrete and reinforced concrete structures such as bridges, silos, tunnels, retaining walls, chimneys, facade elements.

Anticorosive color coating, for protection of concrete surfaces produced based upon synthetical bitumens and solvents. It is recommended for use at constructions exposed to atmospheric influences, ice, sodium chlorides as well as mild chemical aggression: reinforced concrete, bridges, supporting walls, facades, dock objects etc.

One-component cement-polymer based mixture. It is used for protection against corrosion of new concrete, reinforced concrete and steel members or structures in saline environmens.

Two-component epoxy-tar based coating. It is used for protection of concrete and metal structures, pipelines, reservoirs for oil and its derivatives, reservoirs for butane-propane, waste water reservoirs, especially safeguarded tanks, electric power plants, wood dryers, embedded concrete and metal structures in aggressive environments. ANTIKOROZIN-E ANTIKOROZIN-BB ANTIKOROZIN-BR ANTIKOROZIN-S ADINGPOKS-TER Form: paste Consumption: 2 0,15-0,2 kg/m 3 Bulk density: 1,3 kg/dm Form: paste Consumption: 2 0,6-0,7 kg/m 3 Bulk density: 1,5 kg/dm Form: paste Consumption: 2 2 Bulk density: 3 1,35-1,45 kg/dm for two layers 0,5-0,6 kg/m for three layers 0,65-0,8 kg/m Form: powder Consumption: 2 1,6-1,8 kg/m 3 Bulk density: 1,4 kg/dm

Form: black paste Consumption: 2 0,4-0,45 kg/m 3 Bulk density: 1,3 kg/dm Sets: 5,7 kg.

Color: gray or red

Plastic cans: 20 kg.

Ading-standard colour card/ number 4 Stell cans: 4 and 20 kg. Natron bags:

30 kg.

Sets: 5,4 kg.

Two-component cement-polymer based mixture. It is used for protection against corrosion of new and old steel members and structures such as reinforcing steel, anchors, steel reservoirs, pipes, manholes, for drinking and technological water supply.

ANTIKOROZIN Form: gray mixture

Consumption: 2 0,6-0,7 kg/m 3 Bulk density: 1,4 kg/dm A C Natron bags: 20 kg. B C Plastic cans: 10 kg. omponent omponent