Introduction
Fibaro Intercom is a VoIP application designed for Fibaro Home Center 2 controller. It can be integrated with the Fibaro iPad or iPhone application as a mobile audio/video
communication center.
Fibaro Intercom app allows you to communicate with other iOS mobile devices equipped with this app, video entry systems and other VoIP compatible devices.
Application is designed for use with Fibaro Home Center 2 having software version 3.902 or newer and devices equipped with iOS.
Description
This instruction manual explains the process of:
Downloading, installing and configuring Fibaro Intercom app
Using Fibaro Intercom app
Integrating Helios intercom device and with your Home Center 2
Calling, answering calls and opening door locks connected to your intercom Manual was prepared using following applications and devices:
Fibaro Home Center 2 ver. 4.033
iPad with ver. 8.1.3 of iOS
Fibaro iPad app ver. 1.42
Fibaro Intercom iPad app ver. 1.0
I Downloading and preparing iPad application
1. Visit App Store, download and install Fibaro application for your device.
3. Open Fibaro application and click “Next”.
5. Fibaro app will now scan for Home Center controllers, choose the one you want to use.
II Configuring Intercom application
1. Once you are logged into HC2, open Fibaro Intercom application by clicking the Intercom icon at the bottom of the main screen.
III Integrating Helios intercom and Home Center 2 Configuration
interface
1. Download Fibaro Finder app from our website (http://www.fibaro.com/en/support). Install and open Fibaro Finder. Select your Home Center 2 gateway and click “Connect”.
3. Open the plugins section, choose the “Available” category and search for the Helios plugin. Choose the plugin depending on the type of license you have acquired for your Helios intercom.
If you have the Enhanced Integration or Gold license choose “Helios Gold” plugin, “Helios Basic” otherwise. Click "Install" button.
4. Click "Free" button to install the plugin.
7. In the advanced settings section click "Search" button to find your Helios device.
9. Type in the user name and the password for this device. If you have forgotten your login or password, check your Helios intercom instruction manual.
10. In the bottom section of the advanced settings you can assign a key code to your VoIP user. It will allow you to call Fibaro Intercom app by dialing selected code on the Helios intercom keypad. Select Fibaro Intercom user and code to assign.
V Modifying VoIP user’s settings and configuring key code calls
1. To change the settings of a VoIP client open the "Panels" section and choose "VoIP Panel" in the menu. Enter the client settings by clicking button on the bar.
2. Configuration screen of selected VoIP client.
VI Using Fibaro Intercom application
1. Once you've created an account you should see the main Fibaro Intercom screen. All VoIP users and devices connected to your HC2 are listed on the right side. If the device you configured earlier is not listed, restart Fibaro Intercom application.
2. Buttons explained:
- Call another user or device
- Open door lock connected to a device - Change the avatar for your account
VII Answering calls with the Fibaro Intercom interface
1. You can call your mobile device from another device with the Fibaro Intercom app or Helios intercom by dialing the key code selected in IV.10 section of this manual.
VIII Configuring license settings of the Helios 2N intercom
1. Every Helios intercom comes with Basic License by default. If you have acquired an
enhanced license you must activate it. In order to do that, open your web browser and type in the IP address of your Helios intercom in the address box. You can find the IP address of the device by scanning your network with HC2 as shown in IV.7 section of this manual. Log into the configuration panel. Check the Helios device instruction if you have forgotten your login credentials.
