Cement-based composites
Sisal organosolv pulp as reinforcement for cement based composites
... to cement based ...pulp. Cement based composites reinforced with organosolv or kraft pulps and combined with polypropylene (PP) fibres were produced by the slurry de-watering and ...
10
Thermal Resistance of Calcium Aluminate Cement Based Composites
... concrete, based on Portland cement, does not resist high temperatures very well; it is suitable for temperatures up to 400 ...such cement-based composites with better thermal resistance ...
155
The durability of natural sisal fibre reinforced cement-based composites
... in cement-based composites is also of concern, because the fibres tend to degrade in an alkaline ...environment. Cement-based composites have high alkalinity which is caused by ...
164
Quantifying the cracking behaviour of strain hardening cement-based composites
... an effect on the durability of cement-based composites (Kato et al., 2005) and is thus an important characteristic when quantifying the cracking behaviour of SHCC. 1.2 Aim and Scope The aim of this ...
113
Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC)
... strain-hardening cement-based composites (SHCC) represent a promising solution ...The composites exhibit a strain-hardening tensile behaviour associated with a pronounced multiple cracking ...
6
Study on Modification of Waste Rubber Powder in Cement Based Composites Mixed with Waste Rubber Powder
... of cement-based composites can be significantly reduced by incorporating waste rubber powder in situ , the surface modification methods of the original rubber powder by coupling agent KH560, sodium ...
6
Long-Term Properties of Cement-Based Composites Incorporating Natural Zeolite as a Feature of Progressive Building Material
... Copyright © 2017 Alena Siˇc´akov´a et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided ...
9
Cellulosic fiber reinforced cement-based composites: a review of recent research
... cellulose-fiber-reinforced composites exhibit curves like the one presented in Figure 5, having higher maximum peak strength and post-cracking toughness that the neat ...Portland cement matrix ...BFS ...
37
Impact of graphene oxide and highly reduced graphene oxide on cement based composites
... together with high content functional groups participation in chemical bonding with cement 28.. 29 hydration products which effectively dense and bridged the composite matrix at a nano[r] ...
33
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
... The 3D-concrete-printing test device used in this study is shown in Figure 2. 3DPTD contains a computer-controlled, free-traversing printhead consisting of a container, a progressive cavity pump acting as extruder, a ...
18
Wave-Absorbing Properties of Multi-Walled Carbon Nanotubes Reinforced Cement-Based Composites
... accidents. Cement-based composite is commonly used in engineering constructions not only in civil fields but also in military ...materials, cement- based composite exhibits excellent ...
7
A Review on Coir Fiber Treated with natural rubber Latex as Concrete Reinforcement Material in cement Based Composites
... polymer composites onto the ...fibre composites is exposed to marine environment they are suffering from degradation because of surface ...non-reinforced cement-based matrix which is brittle ...
8
crystals Effects of Recycled Fine Aggregates and Inorganic Crystalline Materials on the Strength and Pore Structures of Cement-Based Composites
... 3 Department of Materials Science and Engineering, National Dong Hwa University, Hualien 97401, Taiwan; [email protected] * Correspondence: [email protected]; Tel.: +86-15995807147 Abstract: Concrete is porous; ...
26
Assessment of Rheological and Piezoresistive Properties of Graphene based Cement Composites
... The increment in shear rate cycle range has no signif- icant effect on the trend. Moreover, the n values nearly remained stable and consistence. Additionally, it is noted that maximum n values were found for 200–0.6 s −1 ...
23
3D printing of cement composites
... An example of an immediate application for using cement technology in ALM is custom hard tissue implants. In order to address this, a number of researchers have tried to incorporate macroporosity into HA ...
8
Natural fibre reinforced cement composites
... Table 4.3 Fibre weighted average length (mm) 87 Table 4.4 Fibre length mass distribution percentage 87 Table 4.5 Properties of autoclaved screened long bamboo fibre reinforced 88.. cem[r] ...
220
Mechanical Properties and Durability of CNT Cement Composites
... CNT Cement Mortars Figure 1 shows the bending and compressive strengths for each CNT dosage of cement mortars submerged in water for 7 and 28 ...Portland cement mortars tested at curing ages of 7 and ...
12
Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance
... and cement composites have the potential for being used as road materials, although they are still at an early stage of ...and cement, it should be possible to obtain a material with higher ...
15
Study of hydration behavior of wood cement-based composite II: effect of chemical additives on the hydration characteristics and strengths of wood-cement composites
... The hydration characteristics (tm~x), referred to as a time range for the setting and early-stage strength development of cement, are relatively important, especially d[r] ...
8
Pull-Out Behaviour of Steel Reinforced Cement Composites
... This thesis was aimed at developing an effective and comprehensive numer ical method for modelling the pull-out response of FRCC, especially for those complex cases with inclined fibres, large interfacial slip and ...
224