• No results found

Electrophoretic deposition (EPD)

Electrophoretic Deposition of Poly(N-Vinyl-2-Pyrrolidone)-Capped Platinum Nanoparticles on Fluorine-Doped Tin Oxide Glass as a Counter Electrode for Dye-Sensitized Solar Cells

Electrophoretic Deposition of Poly(N-Vinyl-2-Pyrrolidone)-Capped Platinum Nanoparticles on Fluorine-Doped Tin Oxide Glass as a Counter Electrode for Dye-Sensitized Solar Cells

... Pt nanoparticles (about 1.8 nm in diameter) protected with a polymer layer are prepared by a chemical reduction of Pt ions in the presence of PVP [poly(N-vinyl-2-pyrrolidone)]. PVP-capped Pt nanoparticles can be well ...

9

Phthalocyanine Nanoribbons Fabricated by Template-Free Electrophoretic Deposition

Phthalocyanine Nanoribbons Fabricated by Template-Free Electrophoretic Deposition

... purchased from Whatman Int. Ltd. Two kinds of EPD equipments were constructed as follows: (I) AAO template (deposition of gold film on one side) or (II) indium tin oxide (ITO) coated glass plate served as negative ...

9

Field Dependence of the Spin Relaxation Within a Film of Iron Oxide Nanocrystals Formed via Electrophoretic Deposition

Field Dependence of the Spin Relaxation Within a Film of Iron Oxide Nanocrystals Formed via Electrophoretic Deposition

... In this article, we report on the field dependence of the superparamagnetic transition in a strongly interacting thin film of spinel-phase iron oxide NCs. The field dependence is probed by a combination of ...

6

Effect Of Polycation Additive On Electrophoretic Deposition Of Surface Functionalized Boron Nitride Particles

Effect Of Polycation Additive On Electrophoretic Deposition Of Surface Functionalized Boron Nitride Particles

... in electrophoretic deposition is to plan a steady, without agglomerate colloidal suspension containing the fired ...upgrade deposition rate and produces homogenous and crack free ...

24

Improvement of Antibacterial Activity Resistance of NiTi Alloy by Electrophoretic Deposition

Improvement of Antibacterial Activity Resistance of NiTi Alloy by Electrophoretic Deposition

... paper Electrophoretic deposition (EPD) was used as a surface modification technique to improve the antibacterial activity of NiTi alloy by using organic inorganic coating Nanobiocomposite materials ...

6

Circuit Defects Detection Of Flexible Printed Circuit By Electrophoretic Deposition Of Organic DYE

Circuit Defects Detection Of Flexible Printed Circuit By Electrophoretic Deposition Of Organic DYE

... on Electrophoretic Deposition method ...for Electrophoretic Deposition (EPD) method on conductive material, to investigate circuit defects on FPC using EPD and to validate circuit defects on ...

24

Electrophoretic deposition of alumina and boehmite coatings on metal surfaces

Electrophoretic deposition of alumina and boehmite coatings on metal surfaces

... Electrophoretic deposition (EPD) is gain- ing increasing attention as a powerful method for the formation of both uniform thin and thick films on substrates of complex geometry ...the deposition of ...

12

Electrophoretic deposition for Lithium ion battery electrode manufacture

Electrophoretic deposition for Lithium ion battery electrode manufacture

... Electrophoretic deposition (EPD) has received increasing atten- tion as an alternative manufacturing approach to slurry casting for the production of battery and supercapacitor ...current ...

9

A Review on Effects of Electrophoretic Deposition Parameters over Graphene Related Materials Coating

A Review on Effects of Electrophoretic Deposition Parameters over Graphene Related Materials Coating

... researchers[1].Electrophoretic deposition (EPD) is developed by the Russian scientist Ruess observed an electric field induced movement of clay particles in ...

5

Hydroxyapatite Coating on Titanium Alloy Ti-6Al-4V with Electrophoretic Deposition (EPD) for Dental Root Application

Hydroxyapatite Coating on Titanium Alloy Ti-6Al-4V with Electrophoretic Deposition (EPD) for Dental Root Application

... through electrophoretic deposition (EPD) method to improve quality of the alloy surface, in order to fulfill bioactivity requirement for orthodontic application as dental ...The deposition process ...

7

The Effect of Electrophoretic Deposition Current to Tinplate Coating with Chitosan

The Effect of Electrophoretic Deposition Current to Tinplate Coating with Chitosan

... The coating method which is usually performed is electrophoretic deposition (EPD). EPD method is influenced by some factors such as time, substrate conductivity, potential giving, and suspension ...

6

Effect of voltage and suspension medium on stanum oxide (SnO2) film prepared by electrophoretic deposition (EPD)

Effect of voltage and suspension medium on stanum oxide (SnO2) film prepared by electrophoretic deposition (EPD)

... Electrophoretic deposition (EPD) is an electrochemical coating method which is attracting increasing interest as a material coating technique ...and deposition on complex shaped substrates, including ...

5

Electrophoretic Deposition of Microwave Combustion Synthesized Hydroxyapatite and Its Carbon Nanotube Reinforced Nanocomposite on 316L Stainless Steel

Electrophoretic Deposition of Microwave Combustion Synthesized Hydroxyapatite and Its Carbon Nanotube Reinforced Nanocomposite on 316L Stainless Steel

... Nanohydroxyapatite-carbon nanotube Nanocomposite (HA-CNT) coatings were deposited via electrophoretic deposition (EPD). Hydroxyapatite was synthesized via microwave combustion method using calcium nitrate ...

8

Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition

Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition

... Hydroxyapatite films were fabricated on polished tita- nium substrates using the electrophoretic deposition (EPD) method. A characteristic feature of this process is that colloidal particles suspended in a ...

6

Coating of Cobalt Ferrite Nanoparticles on Carbon Fibres by Electrophoretic Deposition Method for Magnetic and Microwave Studies

Coating of Cobalt Ferrite Nanoparticles on Carbon Fibres by Electrophoretic Deposition Method for Magnetic and Microwave Studies

... particles were successfully deposited on micron size carbon fibres (CFs) using electrophoretic deposition (EPD) method to study microwave absorption properties. A well stabilized suspension of cobalt ...

7

Electrophoretic Deposition of Titanium Oxide Nanoparticle Films for Dye Sensitized Solar Cell Applications

Electrophoretic Deposition of Titanium Oxide Nanoparticle Films for Dye Sensitized Solar Cell Applications

... Electrophoretic deposition (EPD) is an electrochemical deposition of charged particles with an applied electric field in a suspension containing the particles, electrolyte, additives, and solvent ...

5

Effect of Sintering Profile and Composition of Ni/Al2O3 Functional Gradient Materials Coating Layers via Pulsed DC Electrophoretic Deposition

Effect of Sintering Profile and Composition of Ni/Al2O3 Functional Gradient Materials Coating Layers via Pulsed DC Electrophoretic Deposition

... electrophoretic deposition (EPD). The coarsening effect of Ni was studied to control sintering pro fi le with an intermediate step of 1000°C for 3 h. Controlling the sintering conditions through an ...

6

Fabrication and characterization of Ag-Sr doped hydroxyapatite/chitosan coatings deposited on 316L SS via electrophoretic deposition

Fabrication and characterization of Ag-Sr doped hydroxyapatite/chitosan coatings deposited on 316L SS via electrophoretic deposition

... via electrophoretic deposition (EPD) ...and deposition time were optimized on by the Taguchi Design of Experiment (DoE) ...the deposition voltage of 20V, deposition time of 7 minutes, ...

26

Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process

Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process

... During electrophoretic deposition, constant voltage of 50 V was applied by a power supply (Mastech, DC power supply HY30001E, 9225) for 60s and change of electric current during deposition process ...

6

Gold nanoparticle thin films fabricated by electrophoretic deposition method for highly sensitive SERS application

Gold nanoparticle thin films fabricated by electrophoretic deposition method for highly sensitive SERS application

... an electrophoretic deposition method for the fabrication of gold nanoparticle (GNP) thin films as sensitive surface-enhanced Raman scattering (SERS) ...an electrophoretic solution and electrodes, ...

7

Show all 4069 documents...

Related subjects