fibre-reinforced polymer (FRP)
Experimental and Analytical Investigation of Fibre Reinforced Polymer (FRP) Bridge Deck Structures
... Fibre reinforced polymer material is a combination of polymer resins, acting as a binder, with strong and stiff fibres which act as a ...The FRP used is glass FRP (GFRP) which is ...
6
Finite Element Modeling of FRP Wrapped High Strength Concrete Reinforced with Axial and Helical Reinforcement
... Fibre Reinforced Polymer (FRP) is a relatively new composite material manufactured from fibres and resins and has proven to be efficient and economical for the development and repair of new ...
8
Fibre reinforced polymer concrete structures – opportunities and concerns
... defect reinforced concrete structures and also strengthening of insufficient capacity concrete structural elements has inevitably become an important activities in civil ...of reinforced concrete structures ...
11
An experimental study on shear reinforcement in RC beams using CFRP bars
... Fibre reinforced polymer (FRP) as an alternative to steel in reinforced concrete (RC) beams has become increasingly ...of FRP include high strength to weight ratio and corrosion ...
14
Problems associated with plate bonding methods of strengthening reinforced concrete beams
... of reinforced concrete beam is one of the important tasks normally associated with on the maintenance of concrete ...plate, fibre reinforced polymer (FRP) and ...and FRP are more ...
6
Torsional Strengthening of RC Beams using Hybrid CFRP BFRP External U Wrapping
... instances, fibre reinforced polymer (FRP) composites provide another option for ...materials. FRP composites have shown great promise in flexural and shear strengthening as external ...
7
Modeling and Finite Element Analysis of Hybrid FRP Leaf Spring
... hybrid Fibre Reinforced Polymer (FRP) leaf spring made of carbon fibre and Epoxy Resin with different fibre layers, different fibre orientations has been carried out using ...
6
Comparative study on the corrosion rate of rebars embedded in fibre reinforced concrete and fibre reinforced polymer concrete
... banyan fibre content in the concrete. The corrosion rate decreases in fibre reinforced polymer concrete made with optimum polymer content ...5% fibre addition, the corrosion rate ...
7
Study on Fibre Reinforced Polymer Beams with BFRP Wrapping
... The studies of CFRP and GFRP were done. Moreover, studies were not conducted on rehabilitation corroded steel beams with Basalt FibreaReinforced Polymer (BFRP). In this study the effectiveness and feasibility of ...
5
Experiment on RC Beams Reinforced with Glass Fibre Reinforced Polymer Reinforcements
... Abstract—This study presents the flexural behaviour of rectangular concrete beams reinforced with surface treated Glass Fibre Reinforced Polymer (GFRP), Grooved bars and Sand sprinkled ...
7
Retrofitting of Reinforced Concrete Structures
... Then the same control beams are retrofitted using carbon fibre reinforced polymer and allowed to cure. Epoxy resin was used as the binding material between the concrete and the fibre. The ...
6
Temperature effects on a fibre reinforced polymer material
... The „heat deflection temperature‟, also known as „heat distortion temperature‟ or „deflection temperature under load‟ (DTUL), is a measure of the resistance to deflection or distortion of a plastic polymer ...
107
Retrofitting of Reinforced Concrete Structures
... Then the same control beams are retrofitted using carbon fibre reinforced polymer and allowed to cure. Epoxy resin was used as the binding material between the concrete and the fibre. The ...
6
Utilisation of fibre reinforced polymer (FRP) composites in the confinement of concrete
... Several composite jacketing systems have been developed and validated in laboratory or field conditions (Seible, 1997), (Teng et al., 2003), (Karantzikis et al., 2005). One of these systems uses unidirectional carbon ...
7
Robustness of simple joints in pultruded FRP frames
... Structural robustness of simple beam-to-column joints in pultruded frames is assessed through tension pull tests. The tying capacity and failure modes are determined from static tests on two batches of specimens for six ...
32
Parametric Analysis of Fiber Reinforced Polymer (FRP) Composites for Retrofitting of Structures
... Many experimental and FEA analysis are carried out on columns which are subjected to uniaxial compressive load only but in reality most of all columns are subjected to eccentric axial load which can be resolved into a ...
5
AFRP retrofitting of RC structures in Japan
... of FRP in civil engineering struc- tures was first introduced in Japan about two dec- ades ago with the development of FRP reinforce- ment and ...of FRP materials for rein- forced and prestressed ...
6
Tribological behaviour of graphite/date palm fibres reinforced epoxy composites
... graphite and/or DPF. NE = neat epoxy, GE = 3% graphite/epoxy, FE = DPFE, GFE = 3 wt% graphite/date palm fibre/epoxy ......................... 119 Figure 6.3: Micrographs of DPFE composite after tensile test. ...
21
Seismic Response of Post Tensioned Beam Strengthened with Fiber Reinforced Polymer
... Fiber reinforced polymer (FRP) was studied. The use of FRP sheets to create composite structures has increased in recent ...fiber reinforced polymer composite has become viable ...
6
Seismic Response of Post Tensioned Beam Strengthened with Fiber Reinforced Polymer
... basalt. FRP composites are light weight and non- corrosive material which have high strength and high ...of FRP are high strength / weight ratio, low thermal conductivity, long term durability, flexibility, ...
6